Graduation Cap Display 2020 Description: Celebrate graduating in 2020 with this little display. Supports Needed: Yes
Setup: 1) Buy 1.5mm or around that size rope. I used "Duncan Toys Yo-Yo String". Also need super glue and paint pens or white paint with small paintbrush. 2) Print prints. For the cap, I used a raft and auto supports. For the stand, I just used a skirt and rotated the print so that the tall support was in the back. That way, when getting it off the build plate, you won't bust in the front. 3) Use paint or paint markers and paint in the lettering. I suggest using painters tape around the sides because it likes to spatter everywhere. You can also paint the rope. I gave mine a light cream color. 4) I used the yo-yo string and cut the loop and undid the weave to make the tassel. 5) Tuck the rope under the cap button and trim to the right length. 6) Glue the tucked blunt end to the tucked loop side of the rope so that it stays under the button.
GradCap Full Width: 86.285 mm Full Depth: 86.285 mm Full Height: 16.109 mm
CapStand Full Width: 25.000 mm Full Depth: 30.000 mm Full Height: 25.800 mm
Other Information: Estimated Amount: 30.8 g / 10.34 m Estimated Price: $0.93 w/ $30/kg spool