This modular design lets you attach a towel rail to your Ikea Mulig shelving with ease!
What you need: • 4 x TowelRail-Mount • 2 x TowelRail-Corner • 2 x TowelRail-Tpiece for every additional rail • 6g counter sink screws • 22mm OD PVC pipe cut to length (i used this one: https://www.bunnings.com.au/holman-15mm-x-3m-class-18-pvc-pressure-pipe_p4750038)
The parts can be used in any orientation, but have been optimised to print one direction without supports as you can see from the flat feature on one side. Mirror the parts in your slicer if you'd prefer not to flip the over and have the flat side facing up.
When installing, make sure the mounts are positioned to the extreme end of either upright before screwing them in place ensuring the towel rail is mounted firmly.