Skip to main content

Thingiverse Archive

MakerBot's Thingiverse is a thriving design community for discovering, making, and sharing 3D printable things. As the world's largest 3D printing community, we believe that everyone should be encouraged to create and remix 3D things, no matter their technical expertise or previous experience. In the spirit of maintaining an open platform, all designs are encouraged to be licensed under a Creative Commons license, meaning that anyone can use or alter any design.



rss RSS

2,276,382
RESULTS


Show sorted alphabetically

Show sorted alphabetically

SHOW DETAILS
up-solid down-solid
eye
Title
Date Archived
Creator
Thingiverse Archive
by kerem yokuva (kaleith)
data

eye 0

favorite 0

comment 0

Customized version of https://www.thingiverse.com/thing:3867358 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3867358
Topics: customized, stl, thingiverse, Signs & Logos
Thingiverse Archive
by Alexander Crim (The_Melon_Felon)
data

eye 1

favorite 0

comment 0

This is Sifo-Dyas's lightsaber from season six of The Clone Wars. This is a pretty simple print, you will need one of each piece except for the upper and lower fins of which you will need four of each. If you have any questions or suggestions for future designs feel free to leave a comment.
Topics: stl, clone_wars, Toys & Games, jedi, sifo, sifo-dyas, star_wars, lightsaber, starwars,...
Thingiverse Archive
by Stefan Lindgren (stefan63)
data

eye 0

favorite 0

comment 0

Box to support USB-UART on the ESP-01 Helper that I bought from ebay. I have no relations to the ebay seller but like his little ESP-01 helper. I made this "lower box" to make my unit last longer, its a very simple design so I used hot glue to mount the uart board and cyanoacrylate glue "crazy glue" to mount the esp-01 helper to the edge of the box. Other fun stuff at my personal website: stockholmviews.com stl file and f3d is straight from Fusion 360. I printed mine in .2mm...
Topics: Electronics, stl, thingiverse
Thingiverse Archive
by Andreas Stahl (Kernfusion)
data

eye 1

favorite 0

comment 0

Customized version of https://www.thingiverse.com/thing:2572111 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2572111
Topics: stl, DIY, customized, thingiverse
Thingiverse Archive
by james ambrose (jamesambrose9)
data

eye 1

favorite 0

comment 0

Hi All, Here we have a Breakout box for a 10 pin IDC connector to induvial 4mm banana Sockets. It should not matter what 4mm Banana sockets you use, providing they have an 8mm mounting hole. I have a link the ones I use: https://www.ebay.co.uk/itm/Banana-Chassis-Panel-Socket-4mm-Female-Speaker-Connector-Red-Black-x-10-Pairs/224030964669?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 For the 10 pin IDC socket used one of these. this will require gluing in place I also have a link...
Topics: stl, thingiverse, Electronics
Thingiverse Archive
by evelin roth (evelinroth)
data

eye 0

favorite 0

comment 0

Just a keychain
Topics: Keychains, stl, thingiverse
Thingiverse Archive
by proko x68 (prokoko)
data

eye 0

favorite 0

comment 0

Kingroon KP3S. - Hot end fan mounter for 4020 fan. Use insert nut M3(OD4mm*3mm). - Filament guide and cable holder. OD4mm and OD6mm Tube.
Topics: stl, 3D Printer Parts, thingiverse, kingroon, kp3s, kingroon_kp3s
Thingiverse Archive
data

eye 0

favorite 0

comment 0

lampshade and mount, print mount seperate from the shade, pin in place with pieces of filament
Topics: thingiverse, Household, Lampshade, stl
Thingiverse Archive
by Gijs Raggers (gijsmans)
data

eye 0

favorite 0

comment 0

Topics: thingiverse, Electronics, stl
Thingiverse Archive
by Maddie Wick (CleverWhovian)
data

eye 0

favorite 0

comment 0

Emergency meeting table from the viral video game Among Us. One version can be printed as a model. The other stl labelled movable is in two additional parts so a spring can be inserted under the button when a crewmate needs to call an emergency meeting. That part isn't tested quite yet. I also plan on attempting a hinged lid for the button so stay tuned. To scale with a two inch crewmate. Sorry for the excess of files, there's a whole lot of versions I included to make it as print friendly as...
Topics: table, emergency, stl, Video Games, crewmate, among_us, thingiverse, emergency_stop_button,...
Thingiverse Archive
by Todd Olsen (ASLLEXICON)
data

eye 0

favorite 0

comment 0

Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Brave Browser referral: https://brave.com/tod573 Visit my website: https://StarLabs3D.com My YouTube: https://www.youtube.com/c/ToddOlsen ***See video below***
Topics: D&D, dnd, dnd_prop, Dungeons__Dragons, multi-headed, monster, dragons, dnd_mini, fire...
Thingiverse Archive
by Kaspernik K. (kaspernik)
data

eye 0

favorite 0

comment 0

No Supports Needed. Charging location for the Apple Watch (uses a magnetic charger). Stand for the iPhone XR (and other models alike) (uses Ikea Livboj QI charger).
Topics: Mobile Phone, stl, thingiverse
Thingiverse Archive
by Антон Волосатов (linect)
data

eye 0

favorite 0

comment 0

Replacing the hook on the scanner cover.
Topics: Scans & Replicas, replace, stl, holder, thingiverse, office
Thingiverse Archive
by Glenn Hall (Klown69)
data

eye 0

favorite 0

comment 0

Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573
Topics: thingiverse, Keychains, customized, stl
Thingiverse Archive
by Can Do (CanDo415)
data

eye 0

favorite 0

comment 0

To fit in the 2nd row window. Clip in to be insectsafe
Topics: stl, thingiverse, Automotive
Thingiverse Archive
by Pete Torres (BoneCrusherPLT)
data

eye 0

favorite 0

comment 0

A bracket I made for the ender max to add linear rails. bltouch on the right side top left hole is to add a zip tie to pull up the cables. The bracket is also able to hold the 4040 fan upgrade. recessed holes for flat head m3 screws offset is 56, -1, 0 Printing: 30% infill PETG
Topics: stl, thingiverse, 3D Printer Parts
Thingiverse Archive
by (robbio33)
data

eye 0

favorite 0

comment 0

Coat hook I designed in 2016. I printed it with ABS in several colors and together they function as coat hooks for my childerens coats. In the 5 years 1 broke, so maybe do a bit more infill then standard.
Topics: stl, thingiverse, Household
Thingiverse Archive
by Pálinkás István (pistvan)
data

eye 2

favorite 0

comment 0

This is a vertical stand for Lenovo ThinkPad USB-C Dock Gen 2 docking station. https://www.lenovo.com/us/en/accessories-and-monitors/docking/universal-cable-docks-usb/TP-USB-C-DOCK-GEN2-US/p/40AS0090US This way it requires less space on the desk. :)
Topics: stl, Computer, stand, docking_station, Lenovo_Thinkpad, vertical_stand, thingiverse, Lenovo,...
Thingiverse Archive
by Jordan Julian (jmjulianCME)
data

eye 1

favorite 0

comment 0

Replacement gasket/shim for Delta ball-valve faucets. These are often the culprit if your Delta faucet starts leaking, and a replacement module from Delta usually costs about $40. I have tested this and it does work, so save yourself some money and print one! Printed on a Prusa Mini
Topics: stl, Household Supplies, thingiverse
Thingiverse Archive
by Konstantin Reeck (KonniR)
data

eye 0

favorite 0

comment 0

Airflow optimized and space efficient active cooling adapter for a standard 80mm fan with 71.5mm screw spacing. Use 3 x 8mm or 2x 10mm screws (no middle screw in latter case - don't damage the chip behind that one!) for mounting the adapter to the card. Screw head diameter needs to be 5mm or smaller.
Topics: nvidia, Active Cooling, fan, Adapter, Tesla, thingiverse, V100, stl, Computer
Thingiverse Archive
by Erik Berglund (eberglun)
data

eye 0

favorite 0

comment 0

Designed a dungeon board for Boss Monster that uses three parts compared to the other ones out there to accommodate a smaller printing bed. Part 1 is the Boss and Room 1, Part 2 is Rooms 2 and 3, and Part 3 is Rooms 4 and 5. Each compartment will fit a card in a clear sleeve and the walls accommodate two cards stacked. Designed in Fusion 360.
Topics: stl, thingiverse, Toy & Game Accessories, boss_monster
Thingiverse Archive
by multiplaie eriautrom (multiplaie)
data

eye 0

favorite 0

comment 0

Case for gopro hero 9 with mic support tested with resin and hope it work well with filament. comment will be appreciate
Topics: Microphone, Hero, GoPro, GoPro_hero_9, Camera, stl, thingiverse, mic
Thingiverse Archive
by Vladislav Gridnev (vladgridnev)
data

eye 0

favorite 0

comment 0

Use flex, or 100% filled PETG.
Topics: stl, thingiverse, Sport & Outdoors
Thingiverse Archive
by Robert Raleigh (Rob859)
data

eye 0

favorite 0

comment 0

G Scale Bachmann Annie Firebox. Now you can add a lighted firebox to your Bachmann Annie locomotive. You will need a Massoth 8242060 Firebox Light Module. You will need two (2) M2 x 5 screws to mount the light module.. 1) Mount the firebox light module to the firebox insert with the 2 screws. 2) Glue firebox insert/light module assembly to the inside of locomotives boiler backhead. 3) Follow Massoth Manufacturer's instructions for electrical connection. The firebox insert will print best on a...
Topics: stl, thingiverse, DIY
Thingiverse Archive
by (Sir_Winni)
data

eye 0

favorite 0

comment 0

Kleine genau passende Gleiseinschotterungshilfe für N-Scale Roco / Fleischmann ohne Bettung Aufsetzen, Schotter einfüllen, mit dem Pfeil nach vorne übers Geis schieben, fertig. Small, precisely fitting track ballast aid for N-Scale Roco / Fleischmann without bedding Put it on, fill in the gravel, push it over the Geis with the arrow, done.
Topics: angle, Props, Schotter, Einschotterungshilfe, Beschotterungshilfe, stl, thingiverse, gleis
Thingiverse Archive
by Tayler Roberson (Tamperer)
data

eye 0

favorite 0

comment 0

My first design to the public. This is for a hamster.
Topics: thingiverse, hamster_toy, hamster, Pets, stl
Thingiverse Archive
by Karsten Thuen (kthuen)
data

eye 0

favorite 0

comment 0

Meet Pingelin. A very nice and calm little guy. All he wants is to wander around, thinking, just for himself, confidently nodding his little head. Pingelin is an advanced print-in-place toy. When you drive him around he will nod with the head, in a beautiful animated manner. It should be an faily easy print, if your printer is properly calibrated and the filament is of a good quality. There may be two common troubles though: The print may be knoked off the print bed. If so, a great idea would...
Topics: animal, print-in-place, small, Pingelin, pinguin, Toy, Mechanical, Fun, car, calibration_test,...
Thingiverse Archive
by Scotty Larsen (McScott29)
data

eye 0

favorite 0

comment 0

Let me know if there are any issues!
Topics: stl, thingiverse, Video Games, SNES
Thingiverse Archive
by Kevin MacWahnfried (Printfried)
data

eye 0

favorite 0

comment 0

A nice and funky watchstand decorated with several reliefs, designed from scratch with certain of my watches in mind - it should work with most watches though. The design consists of two parts: The upper part your watches will be wrapped around and the lower part, acting as a stand. For the latter, there's four versions available: - Neutral: just a smooth base without any fancy design; slightly angled. - A slightly exaggerated relief of the city of Tuebingen, Germany. Generated using...
Topics: thingiverse, stand, watches, watch, watchstand, stl, equipment_watches, Fashion
Thingiverse Archive
by Harry Tom Assenheimer (MrMojoH)
data

eye 0

favorite 0

comment 0

Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it. Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add weight. Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight. Glue in...
Topics: 3D Printing, thingiverse, stl
Thingiverse Archive
by Aleksey Cherkasskiy (alcherk)
data

eye 0

favorite 0

comment 0

This might be helpful for all Crux3 users who want to use Insta360 Go 2 camera on top of it. I prefer smaller angle (18-22) so designed specially for my case This version has anti-jello legs. Feel free to remix this with different angles Printed using TPU with 30% infill
Topics: stl, R/C Vehicles, crux3, insta360, thingiverse
Thingiverse Archive
data

eye 0

favorite 0

comment 0

I really like sneaks rpi camera mount, but the 2020 base didn't fit the 3030 extrusions on my Voron Switchwire. While I was at it, I gave the back a similar pattern to the panel clamps on the Switchwire, so it fits snug on the side of the printer.
Topics: 3D Printer Accessories, thingiverse, stl
Thingiverse Archive
by Junior Ne (Junr05)
data

eye 0

favorite 0

comment 0

Voxelab Aquila Screen frame, the voxelab logo was sidewas since mounting the screen vertical and it was giving me a little ocd lol so I made this screen frame to cover it.
Topics: Voxelab, 3D Printer Accessories, Aquila, Voxelab Aquila, stl, thingiverse
Thingiverse Archive
by Michael Soucy (nursewolfie)
data

eye 0

favorite 0

comment 0

The first MASK vehicle many of us owned
Topics: Models, thingiverse, stl
Thingiverse Archive
by schlossbauer (schlossbauer)
data

eye 0

favorite 0

comment 0

A Blooper. You can support me on https://www.patreon.com/Schlossbauer if you like my work.
Topics: dnd, dungeons_and_dragons, stl, Toys & Games, thingiverse, tabletop
Thingiverse Archive
by Gisela Marrero Ruiz (Rimbarru)
data

eye 0

favorite 0

comment 0

Customized version of https://www.thingiverse.com/thing:3346069 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3346069
Topics: stl, 3D Printer Accessories, customized, thingiverse
Thingiverse Archive
by Bar Cohen (cohbar)
data

eye 0

favorite 0

comment 0

https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: stl, thingiverse, Vehicles
Thingiverse Archive
by Steinar (stromfo)
data

eye 0

favorite 0

comment 0

Made a coin of the HOGE token. More info regarding hoge: https://hoge.finance/ Telegram: https://t.me/hogefinance Reddit: https://www.reddit.com/r/hoge/ Support HOGE! Buy HOGE!! Added my wallet address in case you want to contribute.
Topics: stl, Coins & Badges, thingiverse
Thingiverse Archive
by David Barfield (IVgivN)
data

eye 0

favorite 0

comment 0

Skye Raptor AXII Mount
Topics: stl, thingiverse, R/C Vehicles
Thingiverse Archive
by Dark Laser (darklaser)
data

eye 0

favorite 0

comment 0

My wife wanted customizable dividers she could use to organize the drawer however she wanted. I printed 3 inch tall dividers, but have included models for 2, 3, 4, and 5 inch tall. Each high comes with multiple lengths of dividers ranging from 1 3/4 inches to 15 1/2 inches. There are a variety of connectors that allow you to arrange the dividers in different ways. You can use command strips to stick the flats against the edges of the drawers, then they won't move. I recommend 100% infill for...
Topics: stl, thingiverse, Kitchen & Dining
Thingiverse Archive
by Paul Sizemore (paulsizemore)
data

eye 0

favorite 0

comment 0

This is a holder for the Ikea IHÄRDIG spice jars.
Topics: stl, thingiverse, Organization
Thingiverse Archive
by Redux Air (ReduxAir)
data

eye 0

favorite 0

comment 0

The parts I use in a raven build are RAVEN-45-LOW.STL and turtle-fin.STL. If you want to use an SMA antenna you can use the file sma-mount.STL. If you want a variable nano camera mount you can use the file camera-mount.STL.
Topics: stl, fpv_racer, turtle_mode, Foxeer_Predator, antenna_mount, camera_mount, thingiverse, R/C Vehicles
Thingiverse Archive
data

eye 0

favorite 0

comment 0

https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: stl, Toy & Game Accessories, thingiverse
Thingiverse Archive
by YCAM YCAM (YCAM)
data

eye 0

favorite 0

comment 0

「[搬入物体設計ワークショップ](https://www.ycam.jp/events/2020/object-design-workshop/)」で制作された物体。 「やまぐちの酒」ケースのサイズで制作されました。 https://www.youtube.com/watch?v=cgWNGY_hZuc
Topics: stl, Other, thingiverse
Thingiverse Archive
by Jason Gross (albinoblacksheep)
data

eye 0

favorite 0

comment 0

Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573
Topics: stl, customized, Keychains, thingiverse
Thingiverse Archive
by Paul Grover (Savidge420)
data

eye 0

favorite 0

comment 0

Yeah, I built my own TARDIS. I’ve been building TARDIS/Police Boxes since the early 80’s. It was only a matter of time before I built one in digital. Resin printed.
Topics: stl, thingiverse, Buildings & Structures
Thingiverse Archive
by Francis Jacques (Hyksos_Sowo)
data

eye 0

favorite 0

comment 0

I printed the original hive at 100% and this original drawer at 99%, but when you put the SD card in it the drawer wont close as the corner of the card hit the wall of the hive. So I moved the SD hole more to the center to be able to close the drawer. Print this at 99% scale and add support for the handle.
Topics: stl, thingiverse, Containers
Thingiverse Archive
by Edison Jewson (Jewson)
data

eye 0

favorite 0

comment 0

75mm twig frame. built as a better flying frame to the eachine trashcan for outdoors. I've taken this out and crashed it a lot, it weighs about 6g and should take a decent beating. watch out with PLA on concrete.
Topics: 3D Printing, Quadcopter, thingiverse, stl, twig, drone
Thingiverse Archive
by Yves Marchand (ym1964)
data

eye 0

favorite 0

comment 0

This is a focuser for a Celestron C11, using: - 1 Nema17 Stepper motor - 2 M4x 20mm Hex Head Screws and - 2 M4 nuts for the lateral screw holder - 2 M3x10mm screws with nuts for case holding - 2 M3x10mm screws for stepper motor - 2 M3x5mm screws with nuts for the gear I used nano arduino with easydriver and Eqfocuser to control the focuser Please see thing 4191869 for more details, it's a remix
Topics: stl, thingiverse, Physics & Astronomy
Thingiverse Archive
by Thomas Kekeisen (thomaskekeisen)
data

eye 0

favorite 0

comment 0

The mirror (https://www.amazon.de/gp/product/B0799MKFWJ?ie=UTF8&psc=1&linkCode=sl1&tag=prusaprints-21&linkId=2553fa4777a6c646d84a1cbc2a16f2c7&language=de_DE&ref_=as_li_ss_tl) I bought for my bike was a little bit too short to match my requirements so I fixed that. Story: https://www.tiktok.com/@thomaskekeisen/video/6932832696074915077
Topics: stl, bike, Sport & Outdoors, mirror, thingiverse
Thingiverse Archive
by Fredrik abc (wababa)
data

eye 0

favorite 0

comment 0

Simple pot with the possibility to write on. No support, no raft 70x55mm, 0,8mm thickness Print it with 100% infill
Topics: stl, Outdoor & Garden, thingiverse
Thingiverse Archive
data

eye 0

favorite 0

comment 0

This is a organizer for key FOBs. I designed this to fit my new 2021 GMC Acadia Denali FOB. The tray organizer will hold up to four. I have two and labeled the openings with Car 1, Car 2, House Keys and a misalliances one. This is a very easy print for those just starting into 3D printing. No supports are required.
Topics: stl, Automotive, organizer, Key_Fob, orginizer, car_key_fob, keyfob, tray, GMC, Denali, Acadia,...
Thingiverse Archive
by Lucien Miller (lbmiller5)
data

eye 0

favorite 0

comment 0

I needed a case to house three 18650 Lithium Ion cells to make a battery pack for an RC model. After looking on Thingiverse for one I could not find a model that suited my needs, so I went into SolidWorks and designed one myself! The case is comprised of 3 parts, a main center body that holds the cells, a bottom cover and a top cover that has exit holes for the power leads and a 4-wire, 3-cell Balance lead. The center body has a hole down the center that will allow the negative lead from the...
Topics: stl, thingiverse, R/C Vehicles
Thingiverse Archive
by hanz gustaf (banerby)
data

eye 0

favorite 0

comment 0

Customized version of https://www.thingiverse.com/thing:3524733 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3524733
Topics: stl, thingiverse, customized, Organization
Thingiverse Archive
by James Dedert (PuzMaker)
data

eye 0

favorite 0

comment 0

**iPad Pro 10.5" Tripod Stand/Holder with Ball Mount** Pictured iPad Pro 10.5 with an IAG case. Access to power, volume buttons is maintained. Cutouts provided for the front facing camera, and Home Button. The stand is designed for Facetime, or other video conferencing applications. The ball mount design allows tilt adjustment, useful for the camera angle. It is probably not sturdy enough to use the touch screen with. The ball/stud assumes a fair amount of stress from the heavy iPad, use...
Topics: ipad_pro, iPad, iPad_Stand, stl, thingiverse, Tablet
Thingiverse Archive
by gabriel tomaz (gabtomaz)
data

eye 0

favorite 0

comment 0

Customized version of https://www.thingiverse.com/thing:305087 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=305087
Topics: stl, thingiverse, customized, Sculptures
Thingiverse Archive
by Robert Huybrechts (Robbel2005)
data

eye 0

favorite 0

comment 0

This is a remix. Al credits for the model to MarcDuGard.
Topics: stl, smartphone_stand, Mobile Phone, retro, vintage, thingiverse, smartphone_holder
Thingiverse Archive
by Alfonso C L Rosell (ASPAFER)
data

eye 0

favorite 0

comment 0

N SCALE WOODLAND SCENICS DPM # 2 DREW DROP INN 1:160
Topics: stl, thingiverse, Hobby
Thingiverse Archive
by Andrea Faccia (AndreaBigYec)
data

eye 0

favorite 0

comment 0

https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: stl, 18650_battery, lion, fpv, thingiverse, R/C Vehicles
Thingiverse Archive
by Anthony Palermo (Im_Making)
data

eye 0

favorite 0

comment 0

I created a four-string version of the popular tensegrity structure/table. This model is a fun print that utilizes the concept of tensegrity to make a platform appear to float. The overall size of this is 3.5" x 3.5" x ≈ 3". I hope you enjoy this print! To make this, print out two of the attached file. They are the same piece but positioned over each other with a string of your choice to link them together.
Topics: stl, im_making, Tensegrity, fun, tensegrity_structure, tensegrity_table, thingiverse, Sculptures,...
Thingiverse Archive
by Kevin Cooper (JumpMaster)
data

eye 0

favorite 0

comment 0

Simple case for eBay volt meter. Opening measures 45.3mm wide by 26.0mm height. It's a perfect fit. The volt meter is a little wider towards the rear which acts like a spring to hold it in place. No supports or raft required. Print face down for the best finish.
Topics: stl, thingiverse, Computer
Thingiverse Archive
by Bolding Maker (Bolding)
data

eye 0

favorite 0

comment 0

Print as you like - it's pretty straight forward :) https://www.youtube.com/watch?v=-UPqgZgjTk8
Topics: stl, thingiverse, Camera
Thingiverse Archive
by vicky stan (smartvicky90)
data

eye 0

favorite 0

comment 0

this is for custom amiibos. I haven't printed this yet but if you do please post. Thank you.
Topics: stl, thingiverse, Sculptures
Thingiverse Archive
by Rylan Masin (Rmasin5)
data

eye 0

favorite 0

comment 0

Topics: stl, thingiverse, Puzzles
Thingiverse Archive
data

eye 0

favorite 0

comment 0

Attach a Linksys E-series router to a wall or ceiling for better WiFi coverage, with this bracket. The end clips securely hold the device, allow it be installed in any orientation. Place the router high on a wall for clear path WiFi signal, or tack it on the ceiling for strong signal between two floors. Compatible routers: Linksys E800 Linksys E900 Linksys E1200 Linksys E1500 Linksys E1700
Topics: stl, thingiverse, Office
Thingiverse Archive
by Alberto Battagłia (AlbyBat)
data

eye 0

favorite 0

comment 0

Original Thing: https://www.thingiverse.com/thing:1010033 Thanks to original Designer. I completely redesigned the piece, using Fusion 360 and starting from the original, I added at the back a 120 degree V with 4 neodymium magnets 8 mm diameter, 3 mm thick. The lateral window fits a Dowel pin 10mm diameter 30mm long, and I made a passage to insert an M4 nut, as a cotnut for fixing the screw. One bearing Outer diameter 22, Inner diameter 10mm, thickness 6 to 9mm (608z) One Spirit Level, 9mm...
Topics: stl, thingiverse, Machine Tools
Thingiverse Archive
by Beem Yo (BeemYo)
data

eye 0

favorite 0

comment 0

just a nice piece of art that I designed. Print in vase mode and 0.8 extrusion width
Topics: stl, thingiverse, Sculptures
Thingiverse Archive
by Marcus Körner (3D_Marcus)
data

eye 0

favorite 0

comment 0

Den Halter habe ich zur Befestigung von den Polaritätstauschern für meine Weichenantriebe unter meiner Modelleisenbahnplatte modelliert.
Topics: stl, Modelleisenbahn, Hobby, Halter, thingiverse
Thingiverse Archive
by carlos porcel (chalekito)
data

eye 0

favorite 0

comment 0

Customized version of https://www.thingiverse.com/thing:4278540 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=4278540
Topics: stl, thingiverse, customized, Accessories
Thingiverse Archive
by Frédéric keyren (squall57)
data

eye 0

favorite 0

comment 0

porte carte personalisé
Topics: stl, thingiverse, Other
Thingiverse Archive
by Timothy Bailey (Zepha)
data

eye 0

favorite 0

comment 0

A filament guide to help smooth the path of filament as it is pulled into the filament runout sensor on the CR-10S Pro V2. I reused several parts from the Ender 3 version (https://www.thingiverse.com/thing:3052488) but I have swapped out the bracket piece with a new one that fits onto the filament sensor of the CR-10S Pro V2. I imagine this will also work for other variants of the CR-10 that have the runout sensor. Requires: * An M4 bolt and nut (Though I ended up using an M3 because the...
Topics: stl, thingiverse, 3D Printer Accessories
Thingiverse Archive
data

eye 0

favorite 0

comment 0

Boardgame insert for "Hand of Fate Ordeals special edition"
Topics: stl, boardgame, Toy & Game Accessories, boardgame_inserts, thingiverse
Thingiverse Archive
by Reinsch Heisst (Reinsch)
data

eye 0

favorite 0

comment 0

Clip on hook for Bruder mobil excavator (fits only for this type)
Topics: bruder, stl, thingiverse, Mechanical Toys
Thingiverse Archive
by PastelCaik (PastelCaik)
data

eye 0

favorite 0

comment 0

Vase with a cylindrical hole cut in.
Topics: stl, vase, Decor, flower_vase, vases, thingiverse
Thingiverse Archive
by COLE JOHNSON (colej1992)
data

eye 0

favorite 0

comment 0

Customized version of https://www.thingiverse.com/thing:3198330 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3198330
Topics: Keychains, stl, thingiverse, customized