Skip to main content

Thingiverse Archive

MakerBot's Thingiverse is a thriving design community for discovering, making, and sharing 3D printable things. As the world's largest 3D printing community, we believe that everyone should be encouraged to create and remix 3D things, no matter their technical expertise or previous experience. In the spirit of maintaining an open platform, all designs are encouraged to be licensed under a Creative Commons license, meaning that anyone can use or alter any design.



rss RSS

2,276,382
RESULTS


Show sorted alphabetically

Show sorted alphabetically

SHOW DETAILS
up-solid down-solid
eye
Title
Date Archived
Creator
Thingiverse Archive
Jan 19, 2022 Donald Landeryou (HeyBuddy)
data

eye 0

favorite 0

comment 0

This is a simple set of test plates for practicing welding and testing adhesives. I use a 3D Pen like a welder and fuse parts together. This has been a great little practice plate to get warmed up. It doesn't matter what you are using, just use your regular settings on any machine for the filament you want to weld. Then practice away.
Topics: welding, Parts, thingiverse, practice, stl
Thingiverse Archive
Jan 19, 2022 Michael Gendron (mgendron57)
data

eye 0

favorite 0

comment 0

this is a 6 pole rotor for my pulse motor.
Topics: thingiverse, rotor, magnet motor, pulse motor, DIY, stl
Thingiverse Archive
Jan 19, 2022 Jacob Pugh (jakepugh)
data

eye 0

favorite 0

comment 0

Bottle Rocket Conversion, break the stick off a bottle rocket and slide it inside and set it in the tube and watch it take off. If you break about a quarter of an inch off the end of the bottle rocket then it wont explode and you can pull out the burned one and slide another one in the tube! or leave it and let it all blow up, also fun. MAY NEED TO ADJUST SCALING TO GET ROCKET TO FIT
Topics: flying, model_rocket, rocketlauncher, thingiverse, firework, rocket, Fireworks, launcher,...
Thingiverse Archive
Jan 19, 2022 FTC Team 11574 Incognito (ftcteam11574)
data

eye 0

favorite 0

comment 0

This Logitech webcam mount is built for FIRST Tech Challenge and FIRST Robotics Competition teams. It interfaces with an actobotics servo mount so that teams can adjust the camera angle as needed during a match. Feel free to reuse and attribute us! :) Designed and created by FTC Team 11574 Incognito. Contact us at ftcteam11574@gmail.com
Topics: robotics, actobotics, FIRST_FTC_Robotics, thingiverse, Servo_Mount, logitech, FIRST_Robotics,...
Thingiverse Archive
Jan 19, 2022 Rich Murray (reallycoolname19)
data

eye 0

favorite 0

comment 0

Keep your Canned drinks High Dry and COLD while floating in the hottub.
Topics: stl, thingiverse, Outdoor & Garden
Thingiverse Archive
Jan 19, 2022 abdullateef almutawa (abdullateef)
data

eye 0

favorite 0

comment 0

cloth hanger
Topics: stl, thingiverse, Fashion
Thingiverse Archive
Jan 19, 2022 Laszlo Markos (lmarkos)
data

eye 0

favorite 0

comment 0

Monitor Headphone Mount for HP XXf (27f, 32f...) series monitors with approximately a 10mm thick frame. Remix of a mount from user Vikneshkmr adding the flange in the rear to keep headphones from sliding off. Printed on its side with supports to the plate.
Topics: stl, thingiverse, Computer
Thingiverse Archive
Jan 19, 2022 L V (lvaszar)
data

eye 0

favorite 0

comment 0

My first design. Although inspired by @tetnum's "TTS 35mm DIN rail more printable", I re-created this to be able to attach to the 8020 profile directly.
Topics: TormachTTS, TTS, thingiverse, Tool Holders & Boxes, 8020_series_10, stl, 8020_1010, Tormach
Thingiverse Archive
Jan 19, 2022 James Valdez (Jaysta)
data

eye 0

favorite 0

comment 0

fingerboard for your graphic protection
Topics: fingerboard, thingiverse, fingerboard_ramp, Hobby, fingerboparding, stl, fingerboarding
Thingiverse Archive
Jan 19, 2022 Sebastian Merk (DerDullie)
data

eye 0

favorite 0

comment 0

A model of the Magazine from a M1918 Browning Automatic Rifle (BAR). I got my hands on a BAR Magazine and decided to model it in Fusion 360. I also included the source file, so you can modify it yourself
Topics: ww1, thingiverse, prop, WW2, WW2_Weapons, america, gun, stl, browning, Props
Thingiverse Archive
Jan 19, 2022 Michael Rogers (mrrstrat)
data

eye 0

favorite 0

comment 0

Here is another Ender 3 Max part for those who own an Ender 3 Max and struggle to find anything for it! This is a Y Axis chain mount for the Johnniewhiskey cable chain. As Ender 3 Max owners know that there is a rear cross member that makes mounting the cable chain for the Y Axis using the stock mount provided not possible. What was needed was a ready-made mount and I found none that worked for me. I took a 40mm blank frame cover from Bryan Vines Ender 3 Max drawer...
Topics: stl, thingiverse, 3D Printer Parts
Thingiverse Archive
Jan 19, 2022 kelly hoffman (whataslacker)
data

eye 0

favorite 0

comment 0

Tired of shaking the glue bottle I decided to make a holder/gluing station for it. I like to have my glue handy but at an angle (otherwise when upside down in a mug I get way too much coming out). Had to counter balance the base with the bottle so I added a tray. Then added a few slots for other tools (scissors, Xacto knife (with or without a blade cover -- there is a rectangular slot under the round slot for the blade), and a pencil or other tool. You could easily pop it into Tinkercad and add...
Topics: stl, thingiverse, Organization
Thingiverse Archive
Jan 19, 2022 Luca Valentino (valentino_luca)
data

eye 0

favorite 0

comment 0

This is a Polar Bear Croc Charm If you like this print please leave a small tip thanks.
Topics: Jibbitz, Croc charm, Luca Valentino, thingiverse, cool, Polar Bear, Other, stl
Thingiverse Archive
Jan 19, 2022 Jason Sisk (PHOENlX)
data

eye 0

favorite 0

comment 0

This is just a simple clip to hang Christmas string lights from a gutter. When printing these parts, they should be printed flat on your print bed. Have a suggestion for a mounting clip? Don't be afraid to contact us on our Facebook page, or send us a message here! www.facebook.com/siskfamilylightshows Like my designs? Help support us by donating to our show! Thanks for looking at and supporting my designs!
Topics: sfl, christmas, thingiverse, LED, gutter, led_string_light, string_lights, DIY, stl, gutter_clip
Thingiverse Archive
Jan 19, 2022 mike schneider (mikeschn)
data

eye 0

favorite 0

comment 0

This is a mini laptop designed and printed around a 5" display with an Adafruit backpack and a Raspberry Pi 4 with a cooling fan. Interference found with the screen and screen cover. Both have been revised to revision A, and are available under files! I'm still working on the wiring. For now I am planning on two separate power cables, one for the screen and one for the RPI. I tried a Y cable, but it was too short. I've placed the order on Amazon, should know in a few days if it works....
Topics: Raspberry_Pi, Computer, thingiverse, laptop, stl
Thingiverse Archive
Jan 19, 2022 Nicola Annecchini (DocGoblin)
data

eye 0

favorite 0

comment 0

The commander of kraken marines team
Topics: space crusade, Toys & Games, thingiverse, warhammer_40k, 40k, warhammer40k, WH40K, stl, star...
Thingiverse Archive
Jan 19, 2022 Joseph Borkowski (borkow)
data

eye 0

favorite 0

comment 0

Remix of Unicorn by YahooJAPAN. My daughter wanted a two-headed unicorn, and this is a fairly crude chop off the head, then duplicated, scaled up 5%, and then rotated and translated until it seemed right. Tree supports worked really well for this.
Topics: stl, thingiverse, Animals, Unicorn
Thingiverse Archive
Jan 19, 2022 Tüftel Typ (TueftelTyp)
data

eye 0

favorite 0

comment 0

[ENG] for Christmas I got a Fossil [(Model FS5402)](https://www.amazon.com/Fossil-Mens-Commuter-Chrono-FS5402/dp/B078TL27YW "(Model FS5402)") watch as a gift. Now that I don't want it to get a scratch, I designed this protective case. In it, the watch holds very well and the screwable lid protects the watch case all around. Whether the protection also fits for other watches I can not say. [GER] zu Weihnachten habe ich eine Fossil [(Modell...
Topics: Schutzkappe, watch, Fossil_Watch, protection, fossil, thingiverse, schutz, uhr, case,...
Thingiverse Archive
Jan 19, 2022 A. S. (AWS11)
data

eye 0

favorite 0

comment 0

Mid brace allows for driveshaft and link clearance. Particularly servo on axle set up.
Topics: stl, thingiverse, Vehicles
Thingiverse Archive
Jan 19, 2022 Kara Whicker (sevgonlernassau)
data

eye 0

favorite 0

comment 0

Grani mount stand for Figure Rise Standard Amplified Gallantmon/Dukemon. Grani is self balanced. File has a hole for Bandai Action Base. Can fit other Digimon kits as well. Cannot spontaneously transform into Crimson Mode. Note: might need to turn on print thin walls for the fringes to print for FDM.
Topics: Gunpla, Toy & Game Accessories, digimon, thingiverse, stl
Thingiverse Archive
Jan 19, 2022 Qualith QQ (Qualith)
data

eye 0

favorite 0

comment 0

Replacement parts for Clank! board game expansions. Print at least with 30% infill to add some weight.
Topics: boardgames, Toy & Game Accessories, thingiverse, Boardgame_components, boardgame, stl,...
Thingiverse Archive
Jan 19, 2022 Johnny Laing (JohnnySpanners)
data

eye 0

favorite 0

comment 0

A static model of the small narrow gauge locomotives found within Crewe works. Designed for Nm or Z scale trackwork.
Topics: stl, thingiverse, Vehicles
Thingiverse Archive
Jan 19, 2022 Tadeusz Kowalski (Drewnikocur)
data

eye 0

favorite 0

comment 0

scale it ;)
Topics: honda, ek9, thingiverse, honda_civic, 3D Printing, stl
Thingiverse Archive
Jan 19, 2022 Thomas Walker (L0n35tar69)
data

eye 0

favorite 0

comment 0

just a remix removing the cable hook
Topics: 2600, thingiverse, paddle, driving, Video Games, stl, Atari
Thingiverse Archive
Jan 19, 2022 Ooklaboo (ooklaboo)
data

eye 0

favorite 0

comment 0

Replacement part for broken drawer slides. Fits a rail that is 8.5mm x 24mm (5/16 x 15/16). Set the height from the floor and the slide will adjust horizontally. Snap rails into base, set the appropriate height to match the drawer and the assembly will self-adjust horizontally. Can be printed in PLA and used successfully. Although not required, use nylon filament or resin for greater strength.
Topics: drawer, replacement_part, Recreational_vehicle, thingiverse, cabinetry, Drawer_Slide, Replacement...
Thingiverse Archive
Jan 19, 2022 Ronny Funke (Rofu17)
data

eye 0

favorite 0

comment 0

Eine Klemme um einen Tapeziertisch zusammen zu halten, da die Umverpackung nicht lange von Dauer ist und man so nicht jeden einzeln tragen muss sondern als ein Packet. Ich Empfehle 8 Stück zu drucken 2 pro Seite
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
data

eye 0

favorite 0

comment 0

wall holder for a right angle die grinder from Milwaukee (M12FDGA). The fit is perfect and the tool rest nicely in its holder. This version of the design is the screw on version, it is intended to be mounted with 4 3.5mm screws on a wall or in a cabinet. The backplate is optional and acts as a drilling jig, it can however be screwed behind the 2 parts of the holder for additional aesthetic features. The last picture is for illustration purpose of the fit of the tool, it is the kupper panel /...
Topics: M12FDGA, Milwaukee_M12, milwaukee_tools, thingiverse, milwaukee_holder, Tool Holders & Boxes,...
Thingiverse Archive
Jan 19, 2022 Jeremy Iwanski (Iwanski83)
data

eye 0

favorite 0

comment 0

First attempt at Fusion 360. Stand was designed specifically so my wife doesnt have to remove airpods from carry case
Topics: Apple_Watch_Dock, iPhone_stand, Mobile Phone, thingiverse, Airpods_Stand, apple, Apple_Watch_Stand,...
Thingiverse Archive
Jan 19, 2022 Jeffrey (Jlettau)
data

eye 0

favorite 0

comment 0

This is a guide for drilling 1/4" pegs for wood joining. the holes are 1" apart so 3/4" between. I don't know what is typical as I just guessed. I added toleraces to the parts and think it should work as is. It requires on 6-32 screw and bolt for the endstop. I suggest putting the pegs in and glueing from the bottom. this will hold them in place and allow for movement.
Topics: thingiverse, woodworking, DIY, stl, drilling_guide
Thingiverse Archive
Jan 19, 2022 ta note (ta_note)
data

eye 0

favorite 0

comment 0

komainu statue https://sketchfab.com/3d-models/komainu-statue-made-from-granite-a231ebe733544202a0896d2c55eb36e7
Topics: Komainu, shrine, thingiverse, 3D Printing, stl, Japanese_culture
Thingiverse Archive
Jan 19, 2022 Rui Rodrigues (dt3ft)
data

eye 0

favorite 0

comment 0

Cisco SG200 rack mount This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/h1GCuRa9zSy
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
Jan 19, 2022 Dave Lehman (davelehman)
data

eye 0

favorite 0

comment 0

The enclosure and control box (to mount arcade buttons) are for a Ping Pong Scoreboard project I built. Full instructions here on Instructables: https://www.instructables.com/Arduino-Powered-Ping-Pong-Scoreboard-With-3D-print/ The enclosure has an opening for two stacked 32x8 LED displays like this one: https://www.amazon.ca/DAOKI-MAX7219-Control-Display-Raspberry/dp/B07X957BNZ
Topics: stl, thingiverse, Electronics, arduino
Thingiverse Archive
Jan 19, 2022 Jerre jonker (thetwister3000)
data

eye 0

favorite 0

comment 0

Shampoo Bar container for bringing your soap to your bathroom or for just keeping it there. Has a extra holder for the container for if the container drips a bit from returing of the bathroom. Greets, Jerre.
Topics: thingiverse, Happysoaps, shampoo_bar, soap_holder, Bathroom, stl, shampoo_holder
Thingiverse Archive
Jan 19, 2022 Ronald Marksteiner (Roni1988)
data

eye 0

favorite 0

comment 0

Einfach zu drucken. Kann für vieles verwendet werden. Ich verwende die Halterung für zusätzlichen platz unter dem Tisch.
Topics: Bretthalterung, Tisch, Twinkel, tischlade, thingiverse, table ubgrade, Halterung, DIY, stl, tabel,...
Thingiverse Archive
Jan 19, 2022 Stephen Booth (BoothyBoothy)
data

eye 0

favorite 0

comment 0

This is a mount designed for use on my Surface Pro 4 and the Revopoint Pop 3D scanner. It is rather difficult holding the scanner and the tablet whilst concentrating on moving around the subject. This mount makes life a whole lot easier. Controlling the scanning software is so much more efficient with one hand spare. I have uploaded a step file so this can be customised to other Surface Pro models or tablets. Features are: 1.Universal M10 threaded mount (will fit a standard 3/8" camera...
Topics: tripod_adapter, pop, 3dscanner, microsoft_surface, thingiverse, camera_tripod, scanner, surface,...
Thingiverse Archive
Jan 19, 2022 Tomáš Chovanec (tomchovanec)
data

eye 0

favorite 0

comment 0

Plastic cover for empty LIVOLO socket.
Topics: stl, thingiverse, Electronics
Thingiverse Archive
Jan 19, 2022 Marlo Steed (SteedMaker)
data

eye 0

favorite 0

comment 0

A simple organic frame. Designed to print right on the bed plate. Needs no supports.
Topics: Sculptures, ornament, thingiverse, frame, spider, stl, web, design
Thingiverse Archive
Jan 19, 2022 Matt Canton (mjcanton)
data

eye 0

favorite 0

comment 0

The stock Ender 3 electronics enclosure cover is cramped. This Enclosure Cover adds ~12mm of depth, and has mounting location for (2) fans. You will need taller feet with this modification! You can print your own if you like.
Topics: bigtreetech_skr, Mainboard, Creality, electronics, fan, thingiverse, stepper, enclosure,...
Thingiverse Archive
Jan 19, 2022 Benjamin Muir (Beratna)
data

eye 0

favorite 0

comment 0

I created this because I don't have a power-rack so no place to attach a regular pulley high up. I wanted to be able to do cable triceps push downs. This model slips onto the rotating collar so that the collar or the model itself will spin (doesn't matter which) and act as a pulley. This doesn't work well with heavy weights pulling away from *my* rack. Because of the leverage it wants to tip over even with heavy loading at the feet. I used standard junk PLA and it easily held 20kg/45lbs. For...
Topics: stl, thingiverse, Sport & Outdoors
Thingiverse Archive
Jan 19, 2022 Xu Haoping (isotope_jx)
data

eye 0

favorite 0

comment 0

Placing the warthog mounting grip sleeve with one with M36x2 thread one. This makes the warthog A10 stick directly mountable to Winwing base (Orion or Super Libra). Although Winwing store sells a metal cnc adapter for mounting warthog stick, personally I think that adds too much hieghtto the stick. This thread sleeve matches the height of Winwing's F/A18 stick, so swapping between them doesn't require height adjustments for the mounting system.
Topics: stl, thingiverse, DIY
Thingiverse Archive
Jan 19, 2022 Brodie Murller (H1POCR1P)
data

eye 0

favorite 0

comment 0

more bumpers
Topics: scx10, Axial_Scx10, RC_Car, thingiverse, offroad, R/C Vehicles, stl, toy, RC_truck
Thingiverse Archive
Jan 19, 2022 joe smith (joeyw23)
data

eye 0

favorite 0

comment 0

An organizer that holds 4 AA batteries and only requires 7 - 10g to print.
Topics: holder, AA_Battery, AA_Battery_Holder, organizer, thingiverse, Electronics, stl, battery_holder,...
Thingiverse Archive
Jan 19, 2022 hobbyist maker (blabz)
data

eye 0

favorite 0

comment 0

This is a 3.2V LFP battery charger based on TP5000 module. Howz it made in below link https://youtu.be/IsSJ1RLpYSA Battery holder from below post https://www.thingiverse.com/thing:4113164
Topics: stl, thingiverse, DIY
Thingiverse Archive
Jan 19, 2022 JACK SCHILLER (JAX225)
data

eye 0

favorite 0

comment 0

Initially, this was published as part of my X5SA PRO's overhead filament system , but it works so well, I thought it deserved its own Thing. This filament guide allows low-friction dispensing at extreme angles (I consider 45deg to be extreme, at least in this case) incorporating a PC4 connector and a 20mm length of PTFE tubing as an internal guide. It is designed to be made on a resin printer. I found there was notable friction on the filament when the extruder travels to extremes of the print...
Topics: stl, thingiverse, 3D Printer Parts, filament_guide
Thingiverse Archive
Jan 19, 2022 Roberto Ceccherini (66killrob)
data

eye 0

favorite 0

comment 0

Porta cialde per sistema Caffitaly
Topics: stl, thingiverse, Kitchen & Dining
Thingiverse Archive
Jan 19, 2022 Thomas Funk (Barbatoss)
data

eye 0

favorite 0

comment 0

I created this railing attachment for self-watering Lechuza plant pots (W14Q, Ø14cm). The upper square tube of the railing has a width of 10cm.
Topics: railing, plant_pot, Organization, thingiverse, railing_mount, stl, railing_attachment, lechuza
Thingiverse Archive
Jan 19, 2022 Tennsie Hsi (Anitakash)
data

eye 0

favorite 0

comment 0

kids' bow doesn't have an arrow rest (uses the shelf) so I designed one that clicked onto the bow. I made both left and right handed versions. Easy print, around 12 mins each. Bear Archery 1st Shot Bow Set https://www.amazon.com/gp/product/B00R3A79HW/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&th=1
Topics: stl, thingiverse, Sport & Outdoors
Thingiverse Archive
Jan 19, 2022 Wolfgang Exner (wolex)
data

eye 0

favorite 0

comment 0

I added two noses (2,5mm, this is the gap between iinner and outer part when folded) on to the inner side of the outer part next to the wholes so the stand can not collaps easily when it is unfolded. Now the stand is extrem stable.
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
Jan 19, 2022 Keegan Parks (palxion)
data

eye 0

favorite 0

comment 0

Finally got around to modeling a life-sized Deadmau5 head! Tried to get as close to the actual dimensions of each piece as i could, and assembly is definitely required if printing on a smaller printer. I have included the base file which has every piece in its entirety, then also each piece split into pieces to fit on smaller print beds. I have yet to test print, but should print just fine with stock settings, or whatever settings you prefer.
Topics: Deadmouse, Globe, Deadmau5, thingiverse, Mouse, Dead, cosplay, Head, Ears, Electronic_music,...
Thingiverse Archive
Jan 19, 2022 Jerre jonker (thetwister3000)
data

eye 0

favorite 0

comment 0

Can be used with 1 - 8 mm wires. Note that you should never work with live wires, It's very dangerous! always make your workspace free of danger. But if you do work with electricity on for whatever reason.. At least use this tool. Put the wire inside this terminal and screw it down not too tightly. Now at least the copper is non touchable. I Highely recommend testing your fillament on conductivity and printing this in a bright color. The Terminal is a ABB KA-16 like piece. Buy the official...
Topics: KA-16, thingiverse, Hand Tools, Live_wire, electrician, stl, electrical_safety, terminal_cover,...
Thingiverse Archive
Jan 19, 2022 Benjamin Sorensen (someguyinkc)
data

eye 0

favorite 0

comment 0

This is a replacement knob for a Zuca disc golf cart, you can drop in an M12 nut, then glue or insertion fit the back cover and then install. You will need a 12mm x1.75 (coarse thread) nut, you can also use a lock nut and locknut version of the cover (Cover_Locknut_xxxxx) version.
Topics: discgolf_cart, Zuca, thingiverse, Discgolf, cart, zuca_disc_golf, stl, Sport & Outdoors
Thingiverse Archive
Jan 19, 2022 Marlon Weber (MRLNWBR)
data

eye 0

favorite 0

comment 0

You can do your own text plates. Text plate size is 177x45mm. The top, bottom and left side have a 1mm edge. The white part is 0.8mm thick, the black part 2mm.
Topics: light, Decor, thingiverse, on_air, led_strip, stl, lamp
Thingiverse Archive
Jan 19, 2022 James Worley (Jedi_Jed_2424)
data

eye 0

favorite 0

comment 0

These are feet to keep your Xbox Series S console from touching the surface it is sitting on. (Note: I designed these feet to work when the Xbox Series S is laid horizontally, they may not work if the console is put vertically.)
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
Jan 19, 2022 LUKASZ KOCZOROWSKI (lkoczorowski)
data

eye 0

favorite 0

comment 0

After stepping on a couple of the original design, they would always break right in the middle. For this remix I've widened the middle support structure. Changes are in red. Print with 20% fill, brim, and no support.
Topics: stl, thingiverse, Playsets
Thingiverse Archive
Jan 19, 2022 Steve Feldman (faultedlogic)
data

eye 0

favorite 0

comment 0

I made this to fit my small acrylic framed Geeetech I3 Pro C printer. Unfortunately, small knobs are required for these style printers. Subsequently, this knob works quite well on my Anet A8. These require a M3 nut. Press the nut into the hex opening, then draw it in until seated using a M3 screw to pull it from the backside.
Topics: acrylic, thumbwheel, thingiverse, Geeetech, bed, knob, Anet A8, stl, leveling, Geeetech I3 Pro, 3D...
Thingiverse Archive
Jan 19, 2022 Simone Tersigni (SimTers)
data

eye 0

favorite 0

comment 0

Questo box è specifico per la scheda madre originale della la cnc 3018 pro mostics, ma con l'aggiunta di una ventola (40x40) piu' grande in modo da raffreddare meglio. Ho creato questo per dare una protezione dalla polvere alla scheda madre, in quanto il supporto originale è semi-aperto. Io ho posizionato la ventola davanti i driver per avere un raffreddamento migliore nei punti piu' caldi e ho aggiunto un filtro anti polvere davanti alla ventola in modo da non far aspirare polvere...
Topics: 3018_pro, cnc, cnc3018, thingiverse, Hobby, stl
Thingiverse Archive
Jan 19, 2022 Maximus Marchi (THEMOOSEGUY)
data

eye 0

favorite 0

comment 0

Just a boss from a game I play (Just Shapes and Beats) super simple print.
Topics: Just shapes and beats, dubstep, thingiverse, beats, video_game, just, Video Games,...
Thingiverse Archive
Jan 19, 2022 Steven Kennard (XeroVolume)
data

eye 0

favorite 0

comment 0

HDZero Micro V2 Cam Mount for the Five33 Switchback Racing Frame. This mount is designed to provide the best protection possible. Prints available at HyperNovaFPV.com
Topics: flyfive33, hdzero_micro, xerovolume, five33, thingiverse, hdzero_micro_v2, five33_switchback,...
Thingiverse Archive
Jan 19, 2022 Max Stone (Maxwell68)
data

eye 0

favorite 0

comment 0

Simple button guard for Bosch Go cordless driver (newer model). The newer Bosch Go (Mk II) has a very sensitive side button that is easy to trigger which can be annoying when using this driver. Even when the FWD/REV slide button is in the central OFF position, the round button can be triggered and can drain the battery if it's in a tool box pressing against something. This print is a simple guard that snaps onto the Bosch Go to provide a guard around the button, without obscuring it. Best to...
Topics: stl, thingiverse, Bosch, Hand Tools
Thingiverse Archive
Jan 19, 2022 Reagan Lansing (15rlansing)
data

eye 0

favorite 0

comment 0

Very simple knife block/ knife stand. Was made specifically for Quisineart kitchen knives. Should work for most kitchen knives.
Topics: thingiverse, kitchen, Kitchen_Utensils, stl, knife_holder, Kitchen & Dining, knife
Thingiverse Archive
Jan 19, 2022 Seth Krause (krauseth)
data

eye 0

favorite 0

comment 0

Have you ever hated getting rickrolled? well, the next time someone sends you one you can quickly print this monstrosity in a quick amount of time and shove it down their throat, making them choke on it and scratch their esophagus with the patented bunny ears to make them not alive and give you the new rickroll.
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
Jan 19, 2022 Mark Tatera (devnull8)
data

eye 0

favorite 0

comment 0

Loved the HeroQuest Mythic Tier organizer and insert by ClixAccessories but 3 parts were too large for my Prusa Mini+ smaller print bed. Simply clipped off the corners from the Fireplace, Tokens_big, and Tokens pieces so they fit diagonally on my printer. All parts still fit nicely into the modified parts. Original files can be found here: https://www.thingiverse.com/thing:5141986
Topics: stl, thingiverse, heroquest, Toy & Game Accessories
Thingiverse Archive
Jan 19, 2022 Patrick Hallek (PatrickHallek)
data

eye 0

favorite 0

comment 0

Simple card holder for Pokemon, YUGIOH or other card with such dimensions.
Topics: Toy & Game Accessories, thingiverse, pokemon_card_stand, card_stand, pokemon, stl,...
Thingiverse Archive
Jan 19, 2022 (iplop)
data

eye 0

favorite 0

comment 0

I noticed that the airflow was very minimal using the original design despite my 24v 4020 sunon fan. This extension seems to increase the airflow across the stepper drivers by a good bit. The version I uploaded here is shorter than the one in the photos. I probably went a bit overboard for my first iteration. Be sure to enable Thin Walls for the airflow rectifier fins. They're .48mm width. The duct is glued in place.
Topics: thingiverse, fan_duct, stl, 3D Printer Parts, stepper_cooler, sovol_sv01
Thingiverse Archive
Jan 19, 2022 Joshua Dodd (Starganderfish)
data

eye 0

favorite 0

comment 0

I made slight changes to the original file (https://www.thingiverse.com/thing:5140089?fbclid=IwAR2N-eA0tAYUfrTmGM4sMIEAsgD0y-ZCKDh71Qf72M2slaSt4IIzdpkbNbY) mainly to remove unneeded surface detailing and hollow areas and to allow for the parts to be printed flat on the plate with minimal supports. I printed mine in one go on an Elegoo Saturn, flat on the plate, using standard resin with an added 15% Siraya Tenacious for added durability.100% solid. This should also work on an FDM printer, as...
Topics: stl, thingiverse, 3D Printer Accessories
Thingiverse Archive
Jan 19, 2022 B J (Shynd)
data

eye 0

favorite 0

comment 0

**WARNING**: This requires cutting the belt that came with the 3DFused kit to shorten it. That makes this mod irreversible-ish - you cannot go back to using the parts that came with the 3D Fused kit. It is alternatively possible to use the stock belt that came with the Ender 3 after cutting off the retaining clips, but it is a very tight fit in that case with not a lot of tensioning adjustment. Plus, then you cannot return your Ender 3 to stock if you need to. I suggest not using this part...
Topics: thingiverse, Y_Belt_clamp, 3dfused, linear_rail, belt_clamp, stl, 3D Printer Parts
Thingiverse Archive
Jan 19, 2022 Laert Andrade (laertdossantos)
data

eye 0

favorite 0

comment 0

My tools were all scattered around, so I decided to model a project to organize them better. Hope you like it!
Topics: scalemeter, thingiverse, Hand Tools, pen, spatula, tool, stl, caliper rule, pliers, glue
Thingiverse Archive
Jan 19, 2022 Stephen Baker (Eternalstudent)
data

eye 0

favorite 0

comment 0

Great clip for outside storage cupboard thing! Felt tight to start with but after fitting, it felt less so! But I needed a female clip with screw holes in a different plane.. so modelled it. Maybe useful for someone?!
Topics: stl, thingiverse, Outdoor & Garden
Thingiverse Archive
Jan 19, 2022 Shinsaku Hiura (shiura)
data

eye 0

favorite 0

comment 0

** This clock is the improved version of former rotary clocks. Now you do not need to buy reflective photosensor to find the origin of the rotors. It uses physical endstop which forces the motor to stall at origin. ** Features: - Photo sensor to find the origin is not necessary. Only popular parts (ESP32 micro controller and 28BYJ-48 stepper motor) drive the clock. - Less noise without click stop (numeric type only) - WiFi setting via smartphone (SmartConfig of ESP32). - Less part count. Only...
Topics: Gadgets, thingiverse, digital clock, 28BYJ-48, ESP32, stl, clock
Thingiverse Archive
Jan 19, 2022 CJ Pi (CJ300WM)
data

eye 0

favorite 0

comment 0

The piece is designed to snap on in place of the stainless steel pan on the A&D FX120i and is designed to match the powder cup on here by koksala (here: https://www.thingiverse.com/thing:4675233 ) Please make sure that if / when you print koksala's cup in the link above that you print it to 80% scale as suggested in the summary for that part as this was designed around that scaling. A scale for that cup other than 80% will result in the cup not being centered under the hole in the top of...
Topics: stl, thingiverse, Sport & Outdoors
Thingiverse Archive
Jan 19, 2022 Dominik Frączek (moodyswing)
data

eye 0

favorite 0

comment 0

In memory of James. Later it was said that this chapter came from Tannhäuser Warpgate... to crush hordes of warboss Kar-a-kan. Hussars are fleet based chapter, "Imperial Eagle" is their flagship. Some say they derive from White Scars due to their predilection for lightning fast charges. Other mention Black Templars as they are constantly crusading or Dark Angels and their deep traditions. Want to stay in tune with what's next? - **[see here :)](https://linktr.ee/moodyswing)**
Topics: stl, thingiverse, Games
Thingiverse Archive
Jan 19, 2022 Aizat Rabbani (Rbunz)
data

eye 0

favorite 0

comment 0

for someone lost stand can used for any figure i used for my anime figure feel free to used
Topics: anime_figure, anime, Toy & Game Accessories, thingiverse, anime_girl, stl
Thingiverse Archive
Jan 19, 2022 (hsiehty)
data

eye 0

favorite 0

comment 0

Queen Roxy with movable jaw. Jaw gap 0.30mm(CR-10S) is suggested for 100% printing. Try Rex1 head keychain https://www.thingiverse.com/thing:5182442 first to ensure the acceptable jaw gap of your machine. Larger jaw gap can be used for smaller-scaled printing(e.g. 0.4mm for 75%), and smaller gap can be used for larger-scaled printing(e.g. 0.15mm for 200%).
Topics: stl, thingiverse, Toys & Games
Thingiverse Archive
Jan 19, 2022 Chris McGee (SturmB)
data

eye 0

favorite 0

comment 0

For any fans of [Phantasmagoria 2](https://en.wikipedia.org/wiki/Phantasmagoria:_A_Puzzle_of_Flesh) or [Conversations](https://www.youtube.com/c/conversationswithcurtis) [With](https://www.twitch.tv/curtis_craig_talks) [Curtis](https://twitter.com/ConvosCurtis), I present the CWC and WynTech logo plates! They're just simple circular "plates" that I set to as big as my printer could handle. I then use PrusaSlicer's [Color Change](https://help.prusa3d.com/en/article/color-change_1687/)...
Topics: WynTech, Curtis, plate, thingiverse, Signs & Logos, logo, stl, CWC
Thingiverse Archive
Jan 19, 2022 Jeremy Myers (Blazefang01)
data

eye 0

favorite 0

comment 0

This is a filament runout sensor mount for a Ender 3, Pro, V2. May not work with stock extruder. I am uploading Sensor Bracket V2 with more rigidity and no need for supports.
Topics: Ender_3_Pro, thingiverse, ender_3_v2, Filament_Sensor, Ender3v2, Ender_3, filament, stl, 3D Printer...