Skip to main content

Thingiverse Archive

MakerBot's Thingiverse is a thriving design community for discovering, making, and sharing 3D printable things. As the world's largest 3D printing community, we believe that everyone should be encouraged to create and remix 3D things, no matter their technical expertise or previous experience. In the spirit of maintaining an open platform, all designs are encouraged to be licensed under a Creative Commons license, meaning that anyone can use or alter any design.



rss RSS

2,276,382
RESULTS


Show sorted alphabetically

Show sorted alphabetically

SHOW DETAILS
up-solid down-solid
eye
Title
Date Reviewed
Creator
Thingiverse Archive
Jan 20, 2022 John Bain (kingbain)
data

eye 2

favorite 0

comment 1

Remix of https://www.thingiverse.com/thing:4589040 Removed the space between cells, printed as whole pieces. I have the individual pieces for smaller printers. will upload later
favoritefavoritefavoritefavorite ( 1 reviews )
Topics: thingiverse, 3D Printing, stl
Thingiverse Archive
Jan 11, 2022 Igor Timofeev (cmexonat)
data

eye 0

favorite 0

comment 1

This is a simple bracket I designed for use with film holder of old Minolta Scan Dual III scaner. Original film holder lacks clips due to plastic degradation. So I choose to have a clip on part to keep it closed when scaning films.
( 1 reviews )
Topics: film, thingiverse, Minolta, repair, stl, holder, scaner, Replacement Parts
Thingiverse Archive
Dec 16, 2021 Ron Watt (rwatt5977)
data

eye 22

favorite 0

comment 1

Galaxy S7 edge sound amplifier. Larger phone slot to accommodate cell phone case.
( 1 reviews )
Topics: cell_phone, Mobile Phone, thingiverse, stl, sound_amplifier, SAMSUNG_GALAXY_S6
Thingiverse Archive
Dec 12, 2021 Nic Lewis (nic_lewis1126)
data

eye 11

favorite 0

comment 1

Spotify Tag to the Song "STAY" by The Kid LAROI (ft. Justin Bieber). Resize to your liking! I used 100% infill because I try to minimize bridging over infill but I'm sure it will work with almost any value for infill. ***I am not affiliated with Spotify or the record label that is associated with the linked song, the 3D model is my work but the song and barcode are not*** (Please don't sue me)
( 1 reviews )
Topics: stl, thingiverse, spotify_keychain, spotify, spotify_code, Keychains
Thingiverse Archive
Dec 11, 2021 Christopher Nupp (chrisnupp)
data

eye 9

favorite 0

comment 1

I designed these for a friend. He invested in cryptocurrency and wanted a coin set with stand to remember to track them. Combined with a wooden stand that has intervals to show which ones are doing best. (a 4-tier stand). Printed on Elegoo Mars resin 3d Printer. 45-degree angle with raft and supports.
( 1 reviews )
Topics: 3D Printing, cryptocurrency, ethereum, stl, crypto coasters, crypto, coaster, ripple, thingiverse,...
Thingiverse Archive
Dec 10, 2021 Andrew Bannister (BannMakes)
data

eye 3

favorite 0

comment 1

My daughter was seeing this movie for her birthday with some friends. Decided to model and print a souvenir for them to all take away. I have used the winter had from Scarabiv, no use reinventing the wheel!
( 1 reviews )
Topics: Kids_Toys, stl, fan_art, thingiverse, movie, Model Robots
Thingiverse Archive
Dec 8, 2021 Christian Neubauer (neu3no)
data

eye 3

favorite 0

comment 1

Mold for a edward snowden bust. Not yet printet, so I'm happy about any exprience with. based on http://www.thingiverse.com/thing:816527
favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topics: stl, snowden_statue, Sculptures, mold, thingiverse, edward_snowden, snowden
Thingiverse Archive
Nov 30, 2021 gr3uh ROBLOX (gr3uh)
data

eye 23

favorite 0

comment 1

#####I made this about a month ago and posted it on Tinkercad. ####This is the infected Peppa Pig from the Roblox game Piggy.
favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topics: video_game, thingiverse, granny, piggy, stl, character, video_game_character, Peppa_Pig, game,...
Thingiverse Archive
Nov 4, 2021 Erwin Ried (eried)
data

eye 51

favorite 1

comment 1

*You can certainly play games on your computer or phone, but an arcade cabinet form factor brings an immediate joy to the players. Being standing up, clicky controls, local multiplayer, etc makes it part of the experience.* This is an arcade cabinet designed to fit on 12 mm thick particle board/ MDF sheets which you can usually get for free in the hardware store because it is used as protection for other materials. Everything was designed to be accessible and cheap. The T-trim is replaced by a...
favoritefavoritefavoritefavorite ( 1 reviews )
Topics: stl, cheap, Video Games, cnc, arcade, thingiverse, MDF, arcade_cabinet
Thingiverse Archive
Oct 29, 2021 Storm Lake Middle School Computer (slms)
data

eye 5

favorite 0

comment 1

keychain Angel Ramirez 7th Grade Fall 2016
favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topics: stl, Keychain, Logic, thingiverse, Art
Thingiverse Archive
Oct 29, 2021 FP- Creator (FP-Creator)
data

eye 3

favorite 0

comment 1

Key-Keychain
favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topics: keychain, Key-Keychain, stl, Keychains, thingiverse, Key
Thingiverse Archive
Oct 29, 2021 Jose Andres Buitron Coria (buva)
data

eye 1

favorite 0

comment 1

keychain for car sea faw
favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topics: 3D_keychain, thingiverse, faw, Keychains, stl, keychain
Thingiverse Archive
Oct 29, 2021 Dividi Dividi (Dividi)
data

eye 2

favorite 0

comment 1

KEYCHAIN - GEOMETRIC PITBULL
favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topics: Keychains, keychain, geometry, pitbull, thingiverse, stl
Thingiverse Archive
Oct 29, 2021 (hannaholshevski)
data

eye 7

favorite 0

comment 1

I made this keychain since my high school softball team just won the state championship. I needed to make something small for my last project and i figured why not make a keepsake? The keychain is a softball printed on neon green acrylic.
favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topics: robbinsvillehighschool, stl, keychain, thingiverse, Keychains
Thingiverse Archive
Oct 25, 2021 Jamison Bran (Jamsgrove)
data

eye 1

favorite 0

comment 1

I needed some nice router table guides for the new router table im building, inspiration was taken from the JessEm router guides. These attach into standard 2020 aluminium extrusion (for my fence im using 2080 aluminium). Parts you will need to complete this: 4 x M5 12mm Ultra Low profile socket screws 2 x M5 20mm Ultra Low profile socket screws 4 x M5 t-slot drop-in nuts 2 x M5 washers 2 x M5 nylon lock nuts 2 x v-wheels (the ones with two 625RS bearings) Enjoy!
favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topics: stl, router, thingiverse, woodworking, DIY, router_table, guide
Thingiverse Archive
Aug 30, 2021 Ana Sanz (AniMusic)
data

eye 19

favorite 0

comment 1

Tornado con bucles
favoritefavoritefavoritefavorite ( 1 reviews )
Topics: thingiverse, 3D Printing, stl
Thingiverse Archive
Aug 18, 2021 CNC Models (cncmodels4you)
data

eye 7

favorite 0

comment 1

Chinese astrology From Wikipedia, the free encyclopedia Jump to navigationJump to search Astrology Astrological Chart -- New Millennium.svg New millennium astrological chart Background History of astrologyAstrology and scienceAstrology and astronomyTraditions, types, and systems Traditions BabylonianHellenisticIslamicWesternHinduChinese Branches NatalElectionalHorary vte This article needs additional citations for verification. Please help improve this article by adding citations to reliable...
favorite ( 1 reviews )
Topics: stl, thingiverse, 3dmodel, rat, Animals, forprint
Thingiverse Archive
Aug 14, 2021 Ellie Cubizolle (EllieTOP3D)
data

eye 0

favorite 0

comment 1

favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topics: Mobile Phone, stl, thingiverse
Thingiverse Archive
Jul 10, 2021 K_ Piper (kbpiper01)
data

eye 4

favorite 0

comment 1

Maybe this is too easy. I am too young to vote, but my vote wouldn't have mattered anyway. I live in Colorado, a state that voted for Hillary Clinton to continue the democracy founded in 1776. I, along with the majority of my high-school classmates are ashamed of the country we are forced to live in. Trump is not just an orange clown. He is a dictator. I am pleading for a coup as soon as Trump takes office, along with half of America. The only way to save this world is to have Trump out of...
favorite ( 1 reviews )
Topics: The end of the world, thingiverse, Donald Trump, USA, end of the world, grave, stl, Other,...
Thingiverse Archive
Jul 10, 2021 St Mary's University Twickenham (stmarys_twickenham)
data

eye 6

favorite 1

comment 1

Blackburn Rovers crest. Back (Blue section) printed with blue PLA, Rose (Red Section) printed with red PLA White section printed with Polyflex.
favorite ( 1 reviews )
Topics: stl, thingiverse, Sport & Outdoors
Thingiverse Archive
Jul 5, 2021 Andy (andyways)
data

eye 10

favorite 0

comment 1

In honor of the release of the latest Daft Punk album, I wanted to print a set of helmets. I couldn't find a decent mesh on thingiverse (I AM DISAPPOINT), so I put this together. This is a ready to print model of Thomas Bangalter's Daft Punk Helmet. I don't think the two Robots have names, so I've been calling it the visor mask. I gave these out as party gifts, who doesn't like a little daft punk? The model is just dying for remixes. Keychains, magnets, gear shift knobs, lets do this people!...
favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topics: thingiverse, daft_punk, sculpture, HarderBetterFasterStronger, stl, music, robot, Sculptures
Thingiverse Archive
Jun 30, 2021 Morgan Lowe (morganlowe)
data

eye 9

favorite 1

comment 1

#Super Retropiepod! Best name ever! #Gerber Files For Button Boards Included! You can send the two RAR archives to your favorite PCB maker to get them made, or make them yourself! I use https://jlcpcb.com/ because it's cheap and fast, but the minimum order is 10pcs. I will be listing my spares on Ebay and will link it here. I spent a lot of money developing this. Just under $400 with parts and services. Please consider tips! See my attempt to play Pepsiman here on the Super Retropiepod:...
favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topics: Raspberry_Pi, Raspberry_pi_3, retropie, raspberry_pi_case, thingiverse, Retro_Gaming, stl,...
Thingiverse Archive
Jun 9, 2021 conlan halm (agbah1)
data

eye 2

favorite 1

comment 1

i made this for a friend
favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topics: Art, stl, thingiverse
Thingiverse Archive
Jun 4, 2021 Blaise D. (BlaiseD)
data

eye 1

favorite 0

comment 1

This is a polylactic acid refrigerator magnet. All craftsdwarfship is of the highest quality. On the magnet is an image of a dwarf. On the back is a 12.7mm diameter, 4.5mm thick ceramic magnet faceted to the back side. The magnet is affixed with a small amount of cyanoacrylate adhesive. It menaces with spikes of polylactic acid,
favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topics: magnet, openscad, thingiverse, fridge_magnet, Decor, dwarf, dwarf_fortress, refrigerator_magnet, stl
Thingiverse Archive
May 23, 2021 nathaniel kurylo (natt111337)
data

eye 6

favorite 0

comment 1

Cuatomizable ikea drawer handle
( 1 reviews )
Topics: ikea, drawer handle, thingiverse, door_handle, draw, handle, drawer, customizable, drawer_pull, 3D...
Thingiverse Archive
May 22, 2021 Omni Parker (omniparker)
data

eye 3

favorite 0

comment 1

I saw someone ask about this model and thought I'd give it a shot. I have not printed it yet so please let me know if changes need to made. I have requested some reference shots that i am waiting on and will update the file once I have more.
( 1 reviews )
Topics: Props, stl, thingiverse
Thingiverse Archive
May 22, 2021 M.A. Rodriguez (kondrez)
data

eye 76

favorite 0

comment 1

I wanted to make an all playing handheld console of course there are several designs wich work with the raspberry pi, but at the moment the raspberry pi isn't good enough at emulating n64 games or ps1 games, so I though about wich device could do this and of course the smartphones have increased in power alot the latest years. I had a samsung S6 laying around wich has an oled screen and ordered a bluetooth gamepad. This worked really well but I still wanted something that looked like a real...
( 1 reviews )
Topics: psp, mame, nes, emulator, stl, Video Games, nds, PS1, retro, smartphone, Retro_Gaming,...
Thingiverse Archive
May 20, 2021 GuP Tank (GuPTaank)
data

eye 1

favorite 0

comment 1

1:72 MK IV tank I model this base on the anime series Girls und Panzer.. its not 100 percent accurate but I think its close enough.. so enjoy! :) - mirror the track, turret, turret cap, fix turret, inner and outer track for the right side tank - also the files included the sail from the anime series feel free to ignore it if you are just interested in the tank itself Also I'm been in the process of painting and curating tanks from the anime series 'Girls und Panzer', if your are interested you...
( 1 reviews )
Topics: uk tank, WWI_tank, mkiv tank, 172, scale tank, ww1_tank, Vehicles, british tank, girls und panzer,...
Thingiverse Archive
May 8, 2021 Dennis Zhou (dennismii)
data

eye 9

favorite 0

comment 1

ROBLOX CHaracter of dennismiiboy
favoritefavoritefavorite ( 1 reviews )
Topics: thingiverse, ROBLOX, character, 3D Printer Parts, stl
Thingiverse Archive
Apr 25, 2021 Zelflame Minecraft (zelflame33)
data

eye 29

favorite 0

comment 1

Minecraft Sword
favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topics: Minecraft, 2D Art, sword, stl, thingiverse, Master_Sword
Thingiverse Archive
Apr 24, 2021 chris mckenzie (dinoking27)
data

eye 17

favorite 0

comment 1

favorite ( 1 reviews )
Topics: anime, godzilla earth, thingiverse, netflix, toho, figurine, bust, godzilla, kaiju, planet eater,...
Thingiverse Archive
Mar 18, 2021 Martin Hozák (hozzy)
data

eye 7

favorite 0

comment 1

New version
favorite ( 1 reviews )
Topics: Toys & Games, duplo, stl, thingiverse
Thingiverse Archive
Feb 4, 2021 Hugo Pickard (h8u21g7o15Pick)
data

eye 47

favorite 0

comment 1

This is my ROBLOX person.
favoritefavoritefavorite ( 1 reviews )
Topics: Video Games, thingiverse, ROBLOX, stl
Thingiverse Archive
- Sven Huijbrechts (toSvenson)
data

eye 0

favorite 0

comment 0

Mount to fix LED rail with a height of 1cm to kitchen closet. A version with and without holes to use a screw instead of glue.
Topics: stl, led_strip, mount, kitchen, thingiverse, Replacement Parts
Thingiverse Archive
- Erkan Özgür Yılmaz (eoyilmaz)
data

eye 0

favorite 0

comment 0

Cap for Oral-B tooth brush. There are two versions. One with honeycomb holes on sides (which is requested by my wife) and another with solid walls (which I prefer more). The parts are Print In Place. There are holes on the inside where you can place 5x2mm magnets. The magnets are a little strong for this design. But those were the ones that I have in hand. So I designed the cap like that. Feel free to remix it for other magnet sizes. As usual, I have included the FreeCAD files along with STEP...
Topics: Bathroom, stl, toothbrush, magnetic, oral-b, thingiverse, oralb, cap, magnet
Thingiverse Archive
- Marco Cau (3dmade)
data

eye 0

favorite 0

comment 0

A simple tool to check the status of fuses. The state of a good fuse is indicated by the LED lighting and the buzzer sound. Other necessary materials: - 2 AAA batteries; - 2 springs; - 1 Led 5mm; - 1 Buzzer active; - 12 Screws 2.3 * 8mm - 8cm wire 26AWG - 20cm hard wire
Topics: AAA, utility, stl, Electronics, LED, Fuse, tester, thingiverse, testing, fusible, buzzer
Thingiverse Archive
data

eye 0

favorite 0

comment 0

Adapter für Einhandzwingen in der XL Version. für mehr Informationen geht auf mein Instagram Account @sven_hi2020
Topics: schraubzwinge, 3D Printing, stl, Einhandzwinge, thingiverse
Thingiverse Archive
data

eye 0

favorite 0

comment 0

Didn't like the Caddx Nebula camera, so made this to fit my spare original DJI camera. Added a lens protector too.
Topics: R/C Vehicles, beta95x_gopro_naked, pusher, stl, beta85x_HD, dji_fpv, CineWhoop, beta85x,...
Thingiverse Archive
- Donna Spicuzzi (dmspic)
data

eye 0

favorite 0

comment 0

This is a cross
Topics: 3D Printing, stl, thingiverse
Thingiverse Archive
data

eye 0

favorite 0

comment 0

Just my design of a audi a4 b5 fender screw insert....for mor durability is recomended to print in ABS leair hight 1.5 and befour mounting rapid soke (3..5sec) in acetone.
Topics: 3D Printing, stl, thingiverse
Thingiverse Archive
data

eye 0

favorite 0

comment 0

GBLS DAS GDR-15 AEG Mag Adapter (For Resin Printing - Beta) Beta - Unfinish - But should be usable at this stage Instruction is TBA, but ideally, it works best with the original feeding lips. I've included some reference photos that might help. The resin I used is ABS Like Resin or Hard+Tough Resin, please use Black or Gray only, because it will lose the print accuracy if it printed by light color resin or transparent resin. Currently testing for FDM printer as well, seems doable. 20201017
Topics: stl, Toy & Game Accessories, thingiverse
Thingiverse Archive
- Johannes Fautz (klein_bottle)
data

eye 0

favorite 0

comment 0

My wall was blank so I made this 2D-like model of the famous X-wing fighter from Star Wars. Because of the huge dimensions of the fighter, I had to split the model into 12 pieces. The final length is about 110 cm! But: The project was designed to be printed by a 3D-printer with a 300mm X 300mm build plate. Issues with smaller build plate dimensions are possible. Not each of the 12 pieces has to be printed seperately, because some parts can be printed together. Those are the...
Topics: fighter, huge, squadrons, x-wing-fighter, 2d_wall_art, wall, xwing_fighter, star wars, 2DArt, star...
Thingiverse Archive
- Cody Gillman (CGman)
data

eye 0

favorite 0

comment 0

Printed with 100% infill for at least 5mm where the metal parts of the chair come into contact with the plastic. \ Intended for use with cheap (dollar store) shelving brackets. Grease every surface exposed to friction.
Topics: shelf_bracket, shelf_support, shelf, stl, repair, Household Supplies, Office_Chair, thingiverse
Thingiverse Archive
- Jonathan Walter (bmxorcist)
data

eye 0

favorite 0

comment 0

Caliper dagger, designed to be metal cast. I've included a version with and without the handle, and the solidworks file to edit if you'd like. Enjoy!
Topics: Caliper, knife, stl, calipers, sword, thingiverse, Props, Dagger
Thingiverse Archive
- Matias Berlin (matiberlin)
data

eye 0

favorite 0

comment 0

Un sombrerito de bruja que hice desde cero. A little witch hat made from scratch.
Topics: stl, llavero, keychain, thingiverse, Keychains
Thingiverse Archive
data

eye 0

favorite 0

comment 0

My non-enclosed mount for a Campark X5, GoPro mount compatible.
Topics: Other, Campark_Action_Camera, stl, Campark X5, GoPro_Mount, thingiverse
Thingiverse Archive
- Alessandro Iannacci (Gh14Cc10)
data

eye 0

favorite 0

comment 0

This is a spacer for M48 telescope optical train, mm 1.5
Topics: Sport & Outdoors, stl, thingiverse
Thingiverse Archive
- Justin Knight (justinknight93)
data

eye 0

favorite 0

comment 0

Jack-o'-lantern eyes and mouth. Print and stick in a pumpkin. Heat up prints with a heat gun or hot water to bend mouth.
Topics: Outdoor & Garden, stl, thingiverse
Thingiverse Archive
- anderson allage (allage)
data

eye 0

favorite 0

comment 0

Acoplador de 8mm (M8) para motor com eixo de 4mm. O acoplador montado tem pouco menos de 8mm x 4mm, portanto ficará fixo nessas medidas indicadas imprimir em camadas menores (0.2mm) e pelo menos 80%(infill) https://youtu.be/14F8BNSonbQ
Topics: 3D Printer Parts, stl, thingiverse
Thingiverse Archive
- BENG HOOI NG (nbhooi)
data

eye 0

favorite 0

comment 0

I print a vacuum adapter to connect my 3d print hole drilling vacuum attachment. It's a can fit 35mm to 42mm hose. Please consider supporting me on Patreon: https://www.patreon.com/nbhooi
Topics: Vacuum_Hose, stl, extension, Household Supplies, 42mm, Vacuum_Adapter, adapter, thingiverse, 35mm,...
Thingiverse Archive
- Rob Vunderink (iRoboton)
data

eye 0

favorite 0

comment 0

Simple shopping cart key/unlocker. Can be instantly removed after unlocking the shopping cart. Don't forget to place it back where it belongs after your shopping run! :) Size: 1 EU, credits to the original poster (@MrFreakman) via REMIX. Double sided engraving. Version 0.3: Increased font used, it was hardly readable.
Topics: Other, rob, stl, thingiverse, shopping_cart_coin
Thingiverse Archive
data

eye 0

favorite 0

comment 0

Another remix of a mount i found for another frame (again it was a while back so cannot find the OG designer, apologies for that) I made it to fit the Taycan as i liked the design, i changed it up a little bit too, also you need to print 4 spacers and put them either side of the mount (top and bottom) otherwise the mount will be loose. I printed the spacers in TPU.
Topics: stl, 3D Printer Parts, thingiverse, CineWhoop, Diatone_Taycan, Tbs_crossfire
Thingiverse Archive
- Jacky Hong (jackyhonghy)
data

eye 0

favorite 0

comment 0

I have moved my Ender 3 into a custom enclosure. Joining sockets from thingiverse. Using polycarbonate sheets for the walls. I bought a 2nd hand Ikea square table from the junk for only USD$ 5.00 only (White) Size 550x550. The height inside the enclosure doesn't include the filament spool. Thanks for a designer in thingiverse who made a horizontal spool that clamp on top of the top extrusion 20x20 of Ender 3. The side wall of the internal enclosure stick with sound proof sponge all round making...
Topics: stl, 3D Printer Accessories, thingiverse
Thingiverse Archive
- makoto imai (imaicom)
data

eye 0

favorite 0

comment 0

A version of the left rotation. Here are the balls for the Pachinko Roll Machine series Please print out the details. https://www.thingiverse.com/thing:4626734 https://denshiman.com/pachinko.html
Topics: Toys & Games, stl, thingiverse
Thingiverse Archive
- Unpleasant Data (UnpleasantData)
data

eye 0

favorite 0

comment 0

This is an experimental an untested thing! OpenSCAD code will be released upon testing. You are playing with a pressure differential here, so be careful. Also, the exposed edges of the slide will be little vicious knives, hungry for blood and FEP. Long story short, by downloading this, you agree that my part in this is done. It's also released into the public domain, with or without attribution. I'd also like to say, again, that this is experimental and the printing geometry is likely going to...
Topics: 3D Printer Parts, anycubic_photon, stl, thingiverse
Thingiverse Archive
- Paul Goldschmidt (MakerPaul)
data

eye 0

favorite 0

comment 0

This is a very stong connector for the Prusa I3 enclosure for connecting two tables (the buttom one) to one each other. It was designed for 20 (five on each leg) 4mm x 16 mm (or longer) Spax Screws (e.g. [these screws, link to Amazon.de](https://fckaf.de/DHJ)). Print this connector four times and screw them to the table, they will never fall apart.
Topics: 3D Printer Parts, stl, thingiverse
Thingiverse Archive
- Stephen LaRochelle (slarochelle0769)
data

eye 0

favorite 0

comment 0

Inspired by stibo (https://www.thingiverse.com/thing:3680561) and itech3dp (https://www.thingiverse.com/thing:2790290), this overhead spool holder is designed to print on the Flashforge Finder without supports. *This is a work in progress and suggestions for improvement are welcome.*
Topics: stl, 3D Printer Accessories, thingiverse
Thingiverse Archive
- Jonas Elgaard (Silverwolph)
data

eye 0

favorite 0

comment 0

The inner plastic part of my lamp broke, so i´ve recreated it, put threaded inserts in and it works like a charm. Only change is there are only 1 plug in the back for a wire in, and the lamp is bolted into the inserts with a M5 instead of a M4. But it´s a 100% replacement from the old old.
Topics: 3D Printing, Nordlux, stl, thingiverse
Thingiverse Archive
data

eye 0

favorite 0

comment 0

I woke up one day and found that my studio was a mess. The vinyl foil was all over the place. I decided to change that. Stand for plotter foils / vinyl foils etc. Made of wooden slats and printed elements. I bought wooden parts at a local DIY store. In my case it is 11 mm x 11 m x 100 mm. In my studio, 50 cm high foil rolls stand in a 100 mm high stand without a problem. Feel free to edit, print and enjoy :)
Topics: stl, vinyl_holder, vinyl, holder, cutter, thingiverse, vinyl_cutter, stand, Tool Holders & Boxes
Thingiverse Archive
- Krzysztof Laska (Steamworx)
data

eye 0

favorite 0

comment 0

E3D V6 hotend adapter for Tronxy X5SA Pro
Topics: tronxy_x5sa_pro, X5SA_Pro, stl, E3D_v6, TRONXY, 3D Printer Parts, thingiverse
Thingiverse Archive
- haythem ltifi (TN_Inventor)
data

eye 0

favorite 0

comment 0

Just my design of a Insta360 Go camera mount for the Diatone TinaWhoop. Super Simple.
Topics: stl, nema17, cnc, torque, thingiverse, 3D Printer Accessories
Thingiverse Archive
- Dan Merrett (a_crippled_bug)
data

eye 0

favorite 0

comment 0

This is my first remix, Found a nice cable grommet for my desk, but I didn't want the handle so I removed the handle.
Topics: stl, Computer, thingiverse
Thingiverse Archive
- roy lambang (Roylambang)
data

eye 0

favorite 0

comment 0

Just my design of a Insta360 Go camera mount for the Diatone TinaWhoop. Super Simple.
Topics: stl, 3D Printer Accessories, thingiverse
Thingiverse Archive
data

eye 0

favorite 0

comment 0

A bumper for a Gardena Sileno Life 750 - 1250 Robotic lawn mower. If you have problems with fallen apples on your lawn during fall, then this bumper is for you. Without this the mower drives over all apples on the lawn and makes a whole lot of noise. With this bumper the mower just pushes the apples in front of it, instead of driving over it. This bumper will reduce the clearance in front of the mower with 25 mm Since the bumper is too large for my printer to print it in one piece, it is split...
Topics: robotic, stl, life, bumper, Sileno, Gardena, lawnmower, thingiverse, Outdoor & Garden
Thingiverse Archive
- Callum Mackenzie (Alexxander1611)
data

eye 0

favorite 0

comment 0

Just a hockey puck display.
Topics: 3D Printing, display, stl, hockey_puck, puck, ice_hockey, thingiverse, stand, hockey
Thingiverse Archive
- Gareth Williams (Gaz_)
data

eye 0

favorite 0

comment 0

Replacement Freezer handle. Screw holes are 18mm from the top/bottom and 10mm from the side Handle dimensions are 200mm x 65mm
Topics: stl, door, thingiverse, Kitchen & Dining, freezer, kitchen, handle
Thingiverse Archive
- Jordi Casas (toti1972)
data

eye 0

favorite 0

comment 0

Botonera de rentavaixelles Teka
Topics: stl, teka, botonera, Kitchen & Dining, thingiverse, rentavaixelles
Thingiverse Archive
- Zdenko Viskup (Biskup)
data

eye 0

favorite 0

comment 0

shower door handle
Topics: Decor, stl, thingiverse
Thingiverse Archive
- Jaime Bontekoe (jaimepb86)
data

eye 0

favorite 0

comment 0

Remix. it is actually 100 mm in the X and Y axis. I added labels to the x and y for simplicity. Z height is still 50mm. Hope it helps! Included .ipt file if you want to add anything.
Topics: 3D Printing Tests, stl, thingiverse
Thingiverse Archive
- Gonçalo Loureiro (GLoL)
data

eye 0

favorite 0

comment 0

Dewalt Tool insert for Tstak (Thingverse problems in generating stls previews)
Topics: Tools, stl, dewalt, hand_tools, Toolbox, tool_holder, tstak, thingiverse, tools
Thingiverse Archive
- pcn3d print (pcn3dprinting)
data

eye 0

favorite 0

comment 0

Explanation : It was built as one of the public buildings needed for various educational materials experience. Police stations were built as one of the public buildings needed for hands-on education such as automobiles, robots, self-driving cars, and trons. You can also download this file from the link below. https://www.3dbank.or.kr/020101/id/7608/gubn/16/page/8/search_order/SEQ Many other 3Dprinting files are in the "3DSangSangPortal". (3D상상포털) Everyone please come and...
Topics: stl, model, thingiverse, Props, building
Thingiverse Archive
- pcn3d print (pcn3dprinting)
data

eye 0

favorite 0

comment 0

Explanation : The statue of Jesus in Rio, Brazil is modeled as a historical model. The statue of Jesus and the stylobate were modeled separately. Only the parts you want can be printed out and used as an ornament, and can also be used as a board game word. You can also download this file from the link below. https://www.3dbank.or.kr/020101/id/7871/gubn/16/page/7/search_order/SEQ Many other 3Dprinting files are in the "3DSangSangPortal". (3D상상포털) Everyone please come and...
Topics: stl, brazil_statue, model, thingiverse, Props, building
Thingiverse Archive
- Kyle Hensley (Kyle_Hensley)
data

eye 0

favorite 0

comment 0

Puerto Rico Game box insert for Puerto Rico. Made to accommodate sleeved cards, but unsleeved cards will also fit. Will not fit the expansions. ------------------------------------------------------------------- Sliced with Cura 4.4.0 and the settings used were optimized for print speed. Line Height - 0.32 Line Width - 0.8 Wall Thickness - 1.6 Wall Line Count - 2 Top/Bottom Thickness - 1.28 Top Layers - 3 Bottom Layers - 2 Infill Density - 10 Infill Pattern - Grid Print Temperature - 205 Build...
Topics: boardgame_organizer, stl, boardgame, Toy & Game Accessories, boardgame_inserts,...
Thingiverse Archive
- C137 Smith (RickSancez)
data

eye 0

favorite 0

comment 0

Erstellt mit SketchUp Wanddicke 2 mm
Topics: stl, Household Supplies, thingiverse
Thingiverse Archive
- Alexandr Nikishin (shura2000)
data

eye 0

favorite 0

comment 0

Masked new year symbol
Topics: bull, stl, Toy & Game Accessories, New_Year, thingiverse, 2021