3
3.0
Apr 13, 2021
04/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
The best snail trap in my opinion: cucumber. The housing only prevents larger animals from reaching the cucumber (especially shrimps ;-) ). I clean the trap every morning, removing dozens of snails. The cucumber should either be bio or the peel should be cleaned up or removed. You can attach an 8 mm aluminium rod to the housing.
Topics: thingiverse, stl, Pets
3
3.0
Apr 5, 2021
04/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
Just a simple holder for LED strips. Usually these LED strips are divided into 10 cm segments. With my two printers I have printed 3 holders each and thus come to 30 cm. I hid the holder behind the upper Z frame and attached them with power strips. And since I took the 24V version, I connected the LEDs directly to the 24V output of my power supply.
Topics: thingiverse, 3D Printer Accessories, stl
6
6.0
Mar 4, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 6
favorite 0
comment 0
Die verbesserte und kleinere Version einer Klammer für die Santos-D Box (von Obi). Im Bild der Vergleich zur größeren älteren Version. The improved and smaller version of a clip for the Santos-D Box (of Obi).
Topics: stl, 3D Printer Accessories, thingiverse
3
3.0
Mar 10, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
English: This holder is intended to be able to attach Tunze Stream 3 pumps to the back of an aquarium that is directly against a wall. You should have 12mm space from the pane to the wall. Two aluminum rods (50 cm each) with an outer diameter of 8 mm are required and M4 screws (12 mm long) for attaching the magnets and the rods. The glass thickness may be a maximum of 12mm thick. Deutsch: Dieser Halter ist dafür gedacht, Tunze Stream 3 Pumpen an die Rückseite eines Aquariums befestigen zu...
Topics: Pets, stl, thingiverse
3
3.0
Apr 5, 2021
04/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
If someone finds a better English name for it, please write a comment! This "thing" is just a little helper to support external filament holders with heavy 2 kg rolls. It ensures that the stepper motor can pull the filament more easily and evenly. That extremely reduces the Z wobble for me. You need a pneumatic pipe fitting with an M6 thread (used in many bowden setups). The holder contains no thread. Just screw it into the hole. It's a little easier with a (clean!) Soldering iron,...
Topics: thingiverse, 3D Printer Accessories, stl
4
4.0
Mar 22, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 4
favorite 0
comment 0
UPDATE: https://www.thingiverse.com/thing:4542696 Please use a translator for the english version! VliesFilter für Technikbecken mit einer eigenen Kammer für den Wasserzulauf. So wie sie normalerweise für Filtersocken verwendet werden. Man benötigt einen Ausschnitt von 190 x 76 mm. Da ich das selbst nicht sauber hinbekommen habe, die Löcher auf dieses Maß auszuschneiden, habe ich mir eine passenden Adapter mit diesem Ausschnitt erstellt und ausgedruckt. Dieser ist nicht dabei, da...
Topics: filter, stl, Pets, aquariums, aquarium_filter, aquarium, fleece, thingiverse
4
4.0
Apr 1, 2021
04/21
by
Andreas Jäde (aJ_Berlin)
data
eye 4
favorite 0
comment 0
Original is from Mwww, many thanks to him! Unfortunately it doesn't fit anymore for my X1 from 03/2020. I've rebuild it completely new in Fusion360, but it is based on the great work of Mwww. I would suggest to add another cable tie to the outcoming cable (like in the picture). It's possible to push it into the case...
Topics: 3D Printer Parts, stl, thingiverse
3
3.0
Jun 11, 2021
06/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
Deutsch (english below) =================== Ein Halter für den Artemio von JBL, bei dem man LEDs (bis zu 12mm breit) einbauen kann, die für Licht und Wärme sorgen. Ich habe ultrahelle LEDs verwendet, die auch spürbar ein bisschen Wärme abgeben. Denn ich brüte die Artemien im relativ kühlen Keller aus. Licht ist zwar nicht zwingend erforderlich, erhöht aber - laut Hersteller - die Schlupfrate. Ich hatte noch Reste von denen hier (Link siehe ganz unten), aber man kann natürlich alle...
Topics: artemia, thingiverse, aquarium, breed_artemia, Pets, stl
2
2.0
Jul 22, 2021
07/21
by
Andreas Jäde (aJ_Berlin)
data
eye 2
favorite 0
comment 0
I create a remix from muelmx (https://www.thingiverse.com/thing:4876733) design. Bigger and with a holder to be able to easy clean or reprint it.
Topics: thingiverse, Bathroom, stl
2
2.0
Dec 1, 2021
12/21
by
Andreas Jäde (aJ_Berlin)
data
eye 2
favorite 0
comment 0
I have developed a couple of holders that serve as a drilling template and at the same time as a holder for the components used behind the backplane. On the one hand, the background is that I only have to drill holes once and, if necessary, adapt and expand the holder. On the other hand, the components are better passively cooled in this way. Mostly the Ruthex M3 thread inserts are used. The power supply holder (still) uses the M5 thread inserts. Now to the individual parts: 30x30_Clip.stl...
Topics: 3D Printer Parts, thingiverse, stl
4
4.0
Mar 9, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 4
favorite 0
comment 0
A simple holder for a Logitech C270 HD. It can rotate horizontally and has a wide range in vertical direction (fixed by a M3 screw). Designed for the LACK enclosure mod of Prusa, but can be used universally of course. The holder needs support and maybe 30% infill, the stand 20% infill, no support.
Topics: 3D Printer Accessories, stl, thingiverse
3
3.0
Jan 7, 2021
01/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
Dry box for my SMD parts and for my filament boxes. Size (LWH): 120 x 80 x 60 mm Screws: M3 (head diameter 12) Includes a mounting hole for these cheap combined temperature and humidity sensors. I use a 0.2mm gap between all sides of each wall to the box. But I found out that my printer is not calibrated in the z-height. The walls should actually be 2.4mm thick, but were then just under 2.6mm thick. Therefore I printed the walls again with Z scaled to 80%. If your printer is calibrated...
Topics: stl, 3D Printer Accessories, thingiverse
2
2.0
Jul 22, 2021
07/21
by
Andreas Jäde (aJ_Berlin)
data
eye 2
favorite 0
comment 0
For the filament guide you'll need a hole of 20mm diameter. Both parts must be screwed together (use grease before!). The pneumatic fitting with the bowden tube is optional. But it keeps my spool holder (comming soon) from unwinding.
Topics: 3D Printer Accessories, thingiverse, stl
2
2.0
Dec 14, 2021
12/21
by
Andreas Jäde (aJ_Berlin)
data
eye 2
favorite 0
comment 0
All spools
Topics: 3D Printer Accessories, stl, thingiverse
8
8.0
Mar 18, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 8
favorite 0
comment 0
Just a holder for the Wenko Turbo-Loc System. The original glue pad doesn't hold very long. I'm using this one now: https://www.amazon.de/gp/product/B016USPRV2/ref=ppx_yo_dt_b_asin_title_o03__o00_s00 And after trying to clean the original holder, I've destroyed it ;) So this is a replacement.
Topics: stl, Bathroom, thingiverse
2
2.0
Dec 14, 2021
12/21
by
Andreas Jäde (aJ_Berlin)
data
eye 2
favorite 0
comment 0
This is just a remix of the great work of Paweł Kucmus. I've modified the parts by adding ruthex M3 threaded inserts instead of the M3 nuts. With me they always fall out. ;-) The mounting of the probe has been changed! I've added the step files for your own modifications. It is a little bit tricky to insert the threaded inserts. I've started by using screws from the other side to fix them. Then I've removed the screw again and used my solder iron to melt them into the plastic.
Topics: 3D Printer Parts, stl, thingiverse
3
3.0
Jul 3, 2021
07/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
A simple stand for the raspberry pi 7 inch display. The raspberry itself remains open for a better passive cooling.
Topics: thingiverse, stl, Electronics
3
3.0
Mar 18, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
Just another filament clip, but with an integrated spring to support different kind of spools.
Topics: thingiverse, 3D Printer Accessories, stl
4
4.0
Mar 24, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 4
favorite 0
comment 0
A replacement for the SB 45 glass scraper from Tetra, where the tube is too flexible, too short and the angle of the blade not optimal for my needs. With the new one I'm able to clean my tight overflow chamber. You'll need the original blade of course (Tetra sells 3 blades for 3-4 €), an aluminium tube (1m long, 10mm diameter outside, 1mm wall thickness) and 2-3 M4 screws (4-6mm long, V2A/V4A or plastic). The tube can be additional fixed by a M4 screw, but it fits very well without a screw in...
Topics: stl, Pets, aquarium, thingiverse
3
3.0
Mar 26, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
A simple rack for reef plugs (feet 12 mm diameter). Size: 194 x 83.6 x 25 mm Each cell: 13 x 13 mm The legs of course have to point upwards when printing. 10% infill (used for the legs only, and yes, it stays on the ground anyway ;-))
Topics: stl, aquarium, thingiverse, reef, plugs, Pets, rack
2
2.0
Dec 1, 2021
12/21
by
Andreas Jäde (aJ_Berlin)
data
eye 2
favorite 0
comment 0
Rotatable / swiveling camera holder for the Logitech C270. You'll need an M3 16-18mm screw + nut for the camera. And an optional Ruthex M3 threaded insert + 6-8mm M3 screw. But I don't need this screw, 'cause this part is tight enough. Camera1.stl should be printed with suppport (from heatbed only).
Topics: 3D Printer Accessories, thingiverse, stl
4
4.0
Mar 15, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 4
favorite 0
comment 0
Just a simple little cave to grow Berghia stephanieae. I bought 10 of them and they all stay in this cave during the day.
Topics: stl, thingiverse, Pets
3
3.0
May 1, 2021
05/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
A lightweight shrimp protection for the OFA skimmer (standard) with a diameter (top) of 40mm. It fits well, even if it's under water.
Topics: stl, aquarium, Surface_Skimmer, thingiverse, Pets
2
2.0
Dec 14, 2021
12/21
by
Andreas Jäde (aJ_Berlin)
data
eye 2
favorite 0
comment 0
The orientation of the STLs is already set correctly. The two parts must be glued together with super glue. You'll need a little bit force to click the holder in and you can use a screwdriver for remove it again.
Topics: 3D Printer Accessories, stl, BTT, thingiverse
3
3.0
Jun 11, 2021
06/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
Deutsch (english below): Für mein Aquascape in einem Juwel Lido Aquarium benötigte ich eine extrem helle Lampe mit einer Breite von 60cm. Mein Ziel war: preiswert, sehr hell, nah am idealen Lichtspektrum und optisch ansprechend. So ist dieses Projekt entstanden. Die Lampe erzeugt 13.552 Lumen aus 8 LED-Streifen mit jeweils einen CRI-Wert von 95. 4 Streifen mit 5200K 2 Streifen mit 4100K 2 Streifen mit 3000K Den blauen und roten Bereich habe ich hier bewusst verstärkt, um ideale Bedingungen...
Topics: thingiverse, Pets, stl
4
4.0
Jan 8, 2021
01/21
by
Andreas Jäde (aJ_Berlin)
data
eye 4
favorite 0
comment 0
Alternative housing for the AZ-Touch wall housing from AZ Delivery (2,8" display). It can be attached to e.g. a sauna pane with several magnets (10x5mm) like mine. But you can found another lid with additional fastening options. You need 8x M3 Ruthex thread inserts and M3 screws (3 x 20mm, 1 x 5-6mm, 4x >10mm).
Topics: Electronics, stl, thingiverse
4
4.0
Mar 15, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 4
favorite 0
comment 0
Cheap DIY Logitech G PowerPlay alternative ;-) I've bought two usb cables from here: https://de.aliexpress.com/item/32830875598.html?spm=a2g0s.9042311.0.0.27424c4dBopr1j I use them to load my wireless keyboard and mouse. A micro USB end piece is permanently attached to both devices. In order to be able to charge one of the devices occasionally, I have fixed one of the cables with this holder on my desk. You'll need two neodym magnets of 8x3 mm and superglue.
Topics: stl, Computer, thingiverse
3
3.0
Sep 13, 2021
09/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
I think it's self-explanatory.
Topics: stl, thingiverse, Electronics
0
0.0
Aug 13, 2022
08/22
by
Andreas Jäde (aJ_Berlin)
data
eye 0
favorite 0
comment 0
Speaker stands for my Teufel CINEBAR ONE+ (2020) used as PC speakers. A standup is really important for this speaker because reflections down to the tabletop will spoil the sound. That probably explains the partly negative reviews. Please note that the speaker is pointing at an upward angle towards my head position. Probably too high for a TV position several meters behind. For me the sound is really great and clear, even compared to my companion 50 from Bose. Dynamore Ultra in particular makes...
Topics: stl, Music, thingiverse
4
4.0
May 1, 2021
05/21
by
Andreas Jäde (aJ_Berlin)
data
eye 4
favorite 0
comment 0
I'm using these cheap SodaStream bottles for my aquarium CO2 system. I designed the holder so that they wouldn't fall over. Printed with 5% Infill in PLA white (M4P).
Topics: stl, thingiverse, Pets
5
5.0
Mar 9, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 5
favorite 0
comment 0
The new black PSU of the MK3S has a width of 106 mm, not 100 mm like the old one. So the PSU holder of the lack enclosure doesn't fit anymore. I've created a new one, similar to the original, but with a small knob to fix the PSU on the top. I've used 30% infill and no support.
Topics: 3D Printer Accessories, stl, thingiverse
3
3.0
Apr 24, 2021
04/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
I'm using this adapter for adding a 40mm fan to the 30mm E3D fan holder. You'll need 4x M3x6 for the 30mm side and 4x M3x16 for the 40mm side (including the fan).
Topics: stl, 3D Printer Accessories, thingiverse
3
3.0
Jan 6, 2021
01/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
Simple battery holder to tidy up my drawer a bit. The CR2032 batteries are held in place with clips.
Topics: Containers, stl, thingiverse
4
4.0
Jan 20, 2021
01/21
by
Andreas Jäde (aJ_Berlin)
data
eye 4
favorite 0
comment 0
This is my new version of my fleece filter V2.1: https://www.thingiverse.com/thing:3733938 The inlay is more robust and has a snap-in mechanism now. The both outside parts must be glued together with super glue. I've created two parts to be able to print it with my prusa i3. The water slide and filter holder just matches the dimensions of my filter tank of course, but could be used as a proposal. Works perfectly this way since two weeks. The new version catches more dirt (detritus), maybe due...
Topics: Pets, stl, thingiverse
6
6.0
Mar 9, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 6
favorite 0
comment 0
Simple spacer for the LACK enclosure mod (see https://www.thingiverse.com/thing:2864118). There are new LACK tables from IKEA where the legs seems to be 4mm shorter than needed for the enclosure parts.
Topics: 3D Printer Accessories, stl, thingiverse
6
6.0
Mar 18, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 6
favorite 0
comment 0
Zubehör für eine Drybox: 1.) Axenhalter für eine 8mm Stange (ich habe eine hohle Stange von Obi verwendet). Wenn man ganz gerade 90°-Wände in der Drybox hat (ist aber extrem selten), kann man auch je ein Kugellager vom Typ 608ZZ verwenden. Ich habe sie weggelassen und lege die Achse einfach so rein. Wird mit 19mm doppelseitigem Klebeband (z.B. Tesa Powerbond) innen befestigt. 2.) Spulenhalter Der Spulenhalter (L+R für kleine Spulen) ist mit dem Zwischenstück M beliebig vergrösserbar. Er...
Topics: stl, 3D Printer Accessories, thingiverse
2
2.0
Dec 13, 2021
12/21
by
Andreas Jäde (aJ_Berlin)
data
eye 2
favorite 0
comment 0
Guide for 4mm bowden tubes. New version added: a pneumatic connector can be used now.
Topics: 3D Printer Accessories, stl, thingiverse
4
4.0
Apr 4, 2021
04/21
by
Andreas Jäde (aJ_Berlin)
data
eye 4
favorite 0
comment 0
English: ====== The new stands are designed to be placed under a monitor. Unfortunately, the original stands are much too large and do not offer any setting options. Here is a guide on how to remove the old stand. But be careful: it is possible that the old original stand will be destroyed! Even if you can prevent it with a little caution. But you definitely have to remove a glued part ... 1.) Unscrew the foot (3 screws). 2.) Carefully (!) pull the silver bezel forward with two fingers, one...
Topics: thingiverse, Audio, stl
6
6.0
Mar 17, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 6
favorite 0
comment 0
Der kleine Halter braucht Support und 100% infill, der Body kein Support und 30-40% infill! Bei den kleinen Knöpfen bitte aufpassen beim Ein- und Ausbauen! Gegebenenfalls beide Teile zusammenkleben. The small mount: support, 100% infill The body: no support, 30-40% infill Be aware of the small knobs, maybe glue both parts together.
Topics: Anycubic, filament, 3D Printer Accessories, flexible_filament, 4max, stl, thingiverse,...
6
6.0
Mar 18, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 6
favorite 0
comment 0
Die Santos-D Box (gekauft bei OBI) hat ein etwas ungünstiges Design für normale Klammern. Ich habe daher stabilere mit mehr Anpressdruck kreiert. Sie halten auch ohne Schrauben, man könnte aber auch eine M6 verwenden. The Santos-D box (bought by OBI) has a difficult design for normal clips. So I designed a stronger one by using two parts. The clip can be used without screws, but it's possible to use a M6.
Topics: stl, 3D Printer Accessories, thingiverse
4
4.0
Mar 9, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 4
favorite 0
comment 0
The spool holder is just another alternative for the LACK enclosure. It uses two bearings of 608 2Z (e.g. https://www.ebay.de/itm/20-St%C3%BCck-Rillenkugellager-608-2Z-Kugellager-608-ZZ-8x22x7-mm-Miniatur/292622440951). The roll is removable. Holder: 20% infill, with support! Roll: 10%, no support Knob: 30%, no support Put the bearings into the roll first (it will fit!). Then the knobs into the bearings (be carefull here, depending on the infill of the knob!).
Topics: 3D Printer Accessories, stl, thingiverse
2
2.0
Nov 30, 2021
11/21
by
Andreas Jäde (aJ_Berlin)
data
eye 2
favorite 0
comment 0
Has to be printed in two parts without support. Then just use a little bit superglue. I'm using 5 brackets for my 300^3 version of the RatRig V-Core 3. But it could be used for all printers with 30x30 alu profiles. If you need another length, just stretch the profile (in one direction!) with the slicer. Configuration for Bigtreetech Octopus 1.1 / Klipper (21 neopixels, full white): [neopixel my_neopixel] pin: PB0 chain_count: 21 color_order: GRB initial_RED: 1.0 initial_GREEN: 1.0 initial_BLUE:...
Topics: 3D Printer Accessories, thingiverse, stl
5
5.0
Mar 5, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 5
favorite 0
comment 0
Kamerahalter für die Logitech C270 HD. Sie wird zum einen mit einer M3-Schraube plus -Mutter verschraubt (alte Halterung muss natürlich vorher entfernt werden). Und oben einfach nur am Deckel des 4Max befestigt. Die Kamera ist optimal entfernt und stört nicht beim Drucken. Dazu bitte noch folgendes Beachten! 1.) Der Fokus der Kamera ist standardmäßig weiter eingestellt, so dass der Innenraum etwas unscharf ist. Dazu kann man sich folgendermaßen behelfen, da der Fokus änderbar ist: Dazu...
Topics: stl, 3D Printer Accessories, thingiverse
5
5.0
Apr 1, 2021
04/21
by
Andreas Jäde (aJ_Berlin)
data
eye 5
favorite 0
comment 0
Original is from Skinha, many thanks to him! I made it suitable for the "new" version of the X1 from 03/2020. The bearings has been changed in my version. I've changed this in the .f3d from Skinah. Printed with layer height 0.2mm, 5% infill and support is not needed of course
Topics: 3D Printer Parts, stl, thingiverse
3
3.0
Apr 4, 2021
04/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
Working with heavy spools. You'll need: 2x rods (8mm x 160mm, aluminium) 4x bearings (608 2Z) 4x screws M4 (optional for fixing the rods, then you'll need hollow rods) 20% infill, 0,3 layer height You'll need a little bit of force to press both parts together for the bearings. No need for additional glue in my case.
Topics: thingiverse, 3D Printer Accessories, stl
3
3.0
Apr 28, 2021
04/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
For the upgrade of the Artillery Sidewinder X1, you'll need: 1.) Bondtech Extruder BMG right 2.) E3D V6 Hotend 3.) 3x M3x35mm screws or (alternatively) 3x M3x40mm with washers 4.) Radial fan 50x50x15 24V [Recommended]: titan heatbreak, copper heatblock, silicone sock, titan plated nozzle (0.6mm in my case) Firmware is based on a Marlin 2.0 mod of pinguinpfleger (https://github.com/pinguinpfleger/ASWX1-FW-MOD/). Changes there: Configuration.h => #define INVERT_E0_DIR true ESteps 445 in my...
Topics: stl, thingiverse, 3D Printer Extruders
2
2.0
Nov 8, 2021
11/21
by
Andreas Jäde (aJ_Berlin)
data
eye 2
favorite 0
comment 0
Simple holder for the default PSU of the Rat Rig V-Core 3: WEHO LRS-250-24 It acts as a drilling aid (2mm drill) and can be changed for other PSUs or for adding a fan. And it gives the PSU some more space for passive cooling. You'll need 4x M4 ruthex threaded inserts and 8x M4*6mm screws.
Topics: 3D Printer Accessories, stl, thingiverse
3
3.0
Mar 25, 2021
03/21
by
Andreas Jäde (aJ_Berlin)
data
eye 3
favorite 0
comment 0
Just a simple model of a tower pc used as a gift certificate. Infill 5%
Topics: stl, Models, thingiverse
