3
3.0
Jan 19, 2022
01/22
by
Daryl Atkinson (dako1966)
data
eye 3
favorite 0
comment 0
This is a more realistic front and rear rack for Tamiya's flat top trailer. Drill holes through the timber deck as shown in the pics .
Topics: Tamiya, thingiverse, R/C Vehicles, Trailer, stl
3
3.0
May 1, 2021
05/21
by
Daryl Atkinson (dako1966)
data
eye 3
favorite 0
comment 0
A steel Sunraysia look rim to suit the balloon tires that come with MN models RC vehicles. 5mm hex. Supports are built in and will require breaking out after printing.
Topics: stl, thingiverse, R/C Vehicles
3
3.0
Jan 6, 2021
01/21
by
Daryl Atkinson (dako1966)
data
eye 3
favorite 0
comment 0
Old school air conditioner units. Full size, low profile and one without light cut outs.
Topics: globeliner, R/C Vehicles, stl, Grand hauler, tamiya, thingiverse, 1/14, king hauler
4
4.0
Mar 26, 2021
03/21
by
Daryl Atkinson (dako1966)
data
eye 4
favorite 0
comment 0
These inserts fit inside standard Tamiya 1/14 truck rims without any modification. Simply unbolt the wheel nut and slip these into the rim and tighten the wheel nut back up to achieve that old school spider rim look. I have included both 5 and 6 stud spiders as well as Trailer and truck hubs which should push fit into place.
Topics: stl, Tamiya, R/C Vehicles, Tamiya_Trucks, thingiverse, wheel, 1/14
2
2.0
Aug 8, 2021
08/21
by
Daryl Atkinson (dako1966)
data
eye 2
favorite 0
comment 0
Super single steer rim to suit Tamiya 1/14 scale trucks. Supports are built in which will be removed after printing. 3 center cap designs are included.
Topics: thingiverse, super single, R/C Vehicles, wheel, Tamiya, stl
3
3.0
Jun 11, 2021
06/21
by
Daryl Atkinson (dako1966)
data
eye 3
favorite 0
comment 0
Aussie style plastic mudguards. Print on its side with mounting faces to the print bed. Use supports. Use 4mm OD aluminum tube to represent mounting arms. These will fit any of Tamiya's dual drive trucks.
Topics: Tamiya, thingiverse, R/C Vehicles, Mudgaurd, stl
3
3.0
Jun 10, 2021
06/21
by
Daryl Atkinson (dako1966)
data
eye 3
favorite 0
comment 0
Extension pieces to bring tamiya bull bars (animal guard) out to the correct width. Replace kit screws with 2mm by at least 10mm long. Print with silver silk for an alloy look.
Topics: animal guard, thingiverse, bull bar, R/C Vehicles, tamiya, stl
4
4.0
May 1, 2021
05/21
by
Daryl Atkinson (dako1966)
data
eye 4
favorite 0
comment 0
Here is an aerodyne sleeper roof to suit Tamiya's King/Grand hauler 1/14 scale trucks. Its designed to be glued to the sleeper roof and the gap between the roof and sleeper filled and sanded. I have also included a hole so it can be screwed in place through the existing aerial hole. I recommend printing this with 1.2mm walls and 10% infill. Print standing upright on the back wall and use support touching build plate.
Topics: stl, aerodyne, 1/14, thingiverse, Tamiya king hauler, R/C Vehicles
3
3.0
Jun 11, 2021
06/21
by
Daryl Atkinson (dako1966)
data
eye 3
favorite 0
comment 0
Right hand dash to suit Grand/King hauler 1/14 scale trucks. Use supports.
Topics: Grand Hauler, thingiverse, Right hand dash, R/C Vehicles, King Hauler, tamiya, stl
5
5.0
May 1, 2021
05/21
by
Daryl Atkinson (dako1966)
data
eye 5
favorite 0
comment 0
A steel Sunraysia look rim to suit narrow WPL C34 tires. 5mm hex. I designed these to fit MN99 Landrover. Supports are built in and will require removing after printing.
Topics: stl, thingiverse, R/C Vehicles
3
3.0
Jan 4, 2021
01/21
by
Daryl Atkinson (dako1966)
data
eye 3
favorite 0
comment 0
Here's my Conveyor belt rear mud guard for Tamiya's 1/14 scale American trucks. Its designed to be printed in two pieces and glued together with CA glue with an accelerator. Mirror the pieces in your slicer to get opposite side. This will bolt straight up to a Globeliner. For the King/Grand hauler two holes will need to be drilled and tapped m3 for the front mounts although you can use a single bolt in the existing hole that the quarter guard was bolted to. I used 1.5 thick rubber for the belt...
Topics: R/C Vehicles, stl, thingiverse
4
4.0
Mar 17, 2021
03/21
by
Daryl Atkinson (dako1966)
data
eye 4
favorite 0
comment 0
Here's an alternative grille for your King/Grand Hauler. Print with supports. I designed this for my Australian SAR Kenworth with 3 vertical bars.
Topics: King Hauler, stl, thingiverse, tamiya, Gand Hauler, R/C Vehicles
4
4.0
Mar 10, 2021
03/21
by
Daryl Atkinson (dako1966)
data
eye 4
favorite 0
comment 0
This is a replacement grille for Tamiya's Globeliner cab to better represent a more realistic truck. A little cut and shut will be required below the headlights but nothing too complicated. Supports are required under the top and bottom of the grille overhang. I glued mine in place but you could drill holes using the cab as a guide.
Topics: R/C Vehicles, stl, thingiverse, Globeliner, Tamiya, 1/14
5
5.0
Jan 6, 2021
01/21
by
Daryl Atkinson (dako1966)
data
eye 5
favorite 0
comment 0
This is a replacement for Tamiya's standard 1/14 scale drive wheel with hex drive. I have designed a breakout section for the hex part but you must include supports in your slicer for the inside of the wheel. The hubs simply push into the wheel centres after fitting the nut. Included are centres for drive and trailer wheels. I have updated this on 22/1/20. More realistic .
Topics: R/C Vehicles, stl, tamiya, wheel, thingiverse, 1/14
3
3.0
Jan 6, 2021
01/21
by
Daryl Atkinson (dako1966)
data
eye 3
favorite 0
comment 0
Air cleaner extensions for tamiyas King and Grand hauler. These use stainless capillary tube 10mm outside and 8mm inside. This tube can be bought off ebay. Print using supports. A single screw (4g or 2.9mm) to attach to the existing air cleaner body. Cut the stainless tubing to desired height and push on.
Topics: R/C Vehicles, stl, Grand hauler, tamiya, thingiverse, 1/14, King hauler
3
3.0
Jan 4, 2021
01/21
by
Daryl Atkinson (dako1966)
data
eye 3
favorite 0
comment 0
Old school roof mounted air conditioner condensers for tamiyas grand/king hauler and globeliner. Low profile versions are included. print upside down for a better finish.
Topics: globeliner, grand hauler, R/C Vehicles, stl, air conditioner, tamiya, thingiverse, king hauler
2
2.0
Apr 20, 2022
04/22
by
Daryl Atkinson (dako1966)
data
eye 2
favorite 0
comment 0
This is a G gauge model of a 10T non air coal hopper used on the Hunter Valley coal fields. This particular design was used by the Pelaw Main Colliery. The main hopper is printed upside down using supports touching build plate only. The frame itself slots together. I have included built in supports on the side frame but you will need to add supports on the inner end frame. The frame is glued together with medium superglue and sprayed with a kicker. Very important to use an accelerator as this...
Topics: R/C Vehicles, stl, thingiverse
3
3.0
Apr 2, 2021
04/21
by
Daryl Atkinson (dako1966)
data
eye 3
favorite 0
comment 0
This is a 1/14 scale 6 spoke super single trailer rim to suit tamiya's hex drive axle.
Topics: tamiya, thingiverse, R/C Vehicles, 1/14 scale, stl
3
3.0
Mar 13, 2021
03/21
by
Daryl Atkinson (dako1966)
data
eye 3
favorite 0
comment 0
These are generic spider style front rims. Both standard tire and super single rims are provided here. The super single rims are now in two offsets; normal and wide. These are one piece rims. Updated both rims to include supports that are easier to remove. updated again {1/12/19}. fixed tight tire beads. also eased bearing holes out slightly. Allow supports in your slicer. update 20/5/20. Fixed problem with tyre bead seperation on small offset super single.
Topics: thingiverse, wheels, R/C Vehicles, Tamiya, Tamiya_Trucks, RC_wheels, stl
3
3.0
Jan 16, 2021
01/21
by
Daryl Atkinson (dako1966)
data
eye 3
favorite 0
comment 0
A replacement Kenworth style dashboard for Tamiya's Globeliner. Two styles are offered, detailed with generic gauge detail and a plain version that can use the kit stickers. The kit steering column is used and screws in using the kit screws. Supports are required. Use supports touching build plate. This is a right hand drive version. Simply mirror it in your slicer to make a left hand drive version.
Topics: stl, thingiverse, R/C Vehicles, Dashboard, tamiya, Globeliner
