2
2.0
Dec 30, 2021
12/21
Dec 30, 2021
by
Edward Park (DoNotLeaN)
data
eye 2
favorite 0
comment 0
This custom sun hood(or shade) is optimized for SmallHD Focus 5" HDMI. It was custom designed only for 3D printing from the modeling stage. (I think it can be mounted on similar SDI products, but I haven't tested the actual attachment.) The sun hood is designed to provide an enhanced viewing experience even in poor lighting conditions. (Sunvisor for outdoor shooting. Reliable protection from the sun and ambient light) Designed to fit the shape of SmallHD Focus 5 and 4 grooves on both...
Topics: monitor, focus, thingiverse, Camera, sunhood, stl, sunshade, smallhd
2
2.0
Nov 23, 2021
11/21
Nov 23, 2021
by
Edward Park (DoNotLeaN)
data
eye 2
favorite 0
comment 0
This is a video on modeling and making a simple hood designed to fit the square filter holder from Season V Episode 01. (See the link below for information on the square filter holder) https://www.thingiverse.com/thing:5035156 https://youtu.be/n2dPXSBz0qA Due to its simple and short shape, it is difficult to expect the effect of blocking stray light entering the lens. However, it serves to protect the front of the filter and is designed to complement the unfinished appearance of the filter...
Topics: Hood, square_filter, holder, thingiverse, stl, square, Camera, filter, filter_holder
4
4.0
Nov 17, 2021
11/21
Nov 17, 2021
by
Edward Park (DoNotLeaN)
data
eye 4
favorite 0
comment 0
This custom lens re-housing is optimized for "Rocky Non / Samyang (POLAR) 35mm f / 1.4 AS UMC still lens (EF mount)". This is a new additional housing version that improves on the housing design of this lens, unveiled a year ago. (Some changes to the front part, changes to the lower shape such as the aperture ring, compatible with the previous version of the front part and the focus gear part) It is possible to remove/omit support parts. If you don't need supporters, ignore them....
Topics: lens_rehousing, thingiverse, 35mm, rokinon, stl, lens, samyang, Camera
2
2.0
Nov 12, 2021
11/21
Nov 12, 2021
by
Edward Park (DoNotLeaN)
data
eye 2
favorite 0
comment 0
This is a video about modeling and making an adapter for mounting an arri rosette extension arm or handle grip so that it can be produced by printing. It is designed to be fixed to a camera cage, etc. with 1/4" screws. I don't think there is a need to make it because there are similar types of products on sale, but there are cases where customization is required, so I modeled several types. In the case of the mount adapter for Z cam E2, a 1/4" screw hole spacing of 24mm was applied....
Topics: thingiverse, stl, arri_rosette, Camera, rosette
2
2.0
Nov 7, 2021
11/21
Nov 7, 2021
by
Edward Park (DoNotLeaN)
data
eye 2
favorite 0
comment 0
Arri Rosette Locking_Expansion Arm and Handle Grip It is designed to be used as a handle with a simple grip detachable design on Arri rosette extension arm. For reliable mounting, use off-the-shelf gear parts made of stainless steel for Arri rosette gear parts whenever possible. See the link below for more details on the parts. Arri Rosette Gear is designing and sharing files, but for 3D printed parts, I don't think it's appropriate to support heavy camera gear, except for some light...
Topics: thingiverse, handle, Arri, stl, Camera, rosette, grip, Extension_arm
2
2.0
Nov 2, 2021
11/21
Nov 2, 2021
by
Edward Park (DoNotLeaN)
data
eye 2
favorite 0
comment 0
If you want to install an SSD(Solid State Drive) in Ninja-V, you need a dedicated SSD or a custom caddy. In Ninja-V purchase package, only one caddy is bundled, so if you want to use multiple SSDs, you will need to purchase additional caddys. And the bundled caddy blocks the vents for heat dissipation with the plastic material and is completely in close contact with the main body, so I think that is one of the factors that make Ninja V hotter because it generates a lot of heat during recording...
Topics: stl, SSD, DIY, thingiverse, Atomos, SSD_Adapter, ninja_V, ninja
2
2.0
Oct 28, 2021
10/21
Oct 28, 2021
by
Edward Park (DoNotLeaN)
data
eye 2
favorite 0
comment 0
The square filter holder for 4x4" (100x100mm) is designed to fit 114mm or 100mm front OD-outside diameter- lenses. (These dimensions also mostly match the dimensions of our previously shared cinematic lens rehousing). During the design process, I tried to minimize each assembly part to create a simple, lightweight, and easy-to-assemble rectangular filter holder. And I thought it was inconvenient to attach and detach it by rotating it on the front screw thread, so I wanted to make it a...
Topics: stl, filter_holder, filter, square, camera, Camera, thingiverse, 4x4
4
4.0
Jul 8, 2021
07/21
Jul 8, 2021
by
Edward Park (DoNotLeaN)
data
eye 4
favorite 0
comment 0
This compact lens hood is custom designed for lenses with an upgraded housing in cinema style. Therefore, it does not fit well with general lenses and is not compatible. In handheld shooting, the shape of the matte box and the general hood was too big and heavy, so I wanted to make a light and compact lens hood. See my channel video list for lenses with an upgraded housing for cinema lens style. The lens housing has an outer diameter of 114mm on the front of the lens and is optimized for a lens...
Topics: lens_hood, DIY, stl, Hood, thingiverse
3
3.0
Jun 3, 2021
06/21
Jun 3, 2021
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
This rear Lens-cap is designed for lens types with a protruding rear of the lens. Although this type of lens is less common, you can find it in wide-angle lenses for older RF cameras or interchangeable lenses for cinema cameras. We also added a mount lens cap for digital mirrorless cameras so that you can mount these lenses on digital mirrorless cameras using an extension adapter. In addition to what was introduced in the previous video, Canon FD and Nikon F mounts and Fujifilm's X mount were...
Topics: FD_mount, nikon, Camera, nikon_f-mount, thingiverse, fujifilm, canon_FD, F_mount, Fuji_X, Fx_mount,...
3
3.0
May 30, 2021
05/21
May 30, 2021
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
These lenses are a vintage set of Soviet prime lenses originally mounted on the Kiev 16u Movie camera. (For standard 16mm film format) "The picture-taking area of standard 16 mm is 10.26 mm × 7.49 mm (0.404 in × 0.295 in), an aspect ratio of 1.37:1, the standard pre-widescreen Academy ratio for 35 mm." The mount of the Kiev 16 U camera is an uncommon 32mm 0.5 pitch screw mounting method and the flange back distance is 31mm. There is a difference of about 2.2mm from the flange back...
Topics: Mir-11M, Vega, kiev, Tair, Camera, thingiverse, kiev_16U, stl
3
3.0
May 23, 2021
05/21
May 23, 2021
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
This lens rear cap is designed for lens types with the protruding rear of the lens. This type of lens is less common, but you can find it in wide-angle lenses for older RF cameras or interchangeable lenses for cinema cameras. We also added MTF and Sony E mount type lens caps as you can mount these lenses on your digital mirrorless cameras using an extension adapter. The Canon EF mount is the most used mount, so I've also added this type of lens rear cap. In most cases, there is no significant...
Topics: Sony_E, MFT, Camera, thingiverse, E_mount, M/43, Leica_M, Canon_EF, EF_mount, stl
3
3.0
May 6, 2021
05/21
May 6, 2021
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
The upgraded lens housing in this video is optimized for the Tokina AT-X PRO 28-70mm f2.6-2.8 for Canon "EF mount" lens. I expect the AT-X PRO 28-70mm f2.8 (SV?) lens of the same shape will fit, but I haven't tested it for fit. *To be precise, this is the lens version with the 3rd generation bayonet hood mount. (3rd Generation _ Tokina 28-70 f2.6-2.8 ATX-PRO II (1997-1999) For another type of lens, the lens housing for Nikon mount, please check the link below....
Topics: tokina, cine, rehousing, Camera, thingiverse, lens, Cinematic, stl
3
3.0
May 2, 2021
05/21
May 2, 2021
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
This lens housing is custom designed for Helios-44-2, 58mm f/2. It is designed for PL mount, and some parts can be mounted sturdily using metal parts for general sale, and attempted to ensure high durability. (M42-PL mount conversion adapter and front filter adapter) Compared to the upgrade housing for the EF mount of the Helios-44-2 that I shared in the previous video, the rear and front parts have been changed. Other parts such as focus ring and aperture ring are of the same design and can be...
Topics: lens_cap, Camera, Helios_44-2, thingiverse, lens, pl_mount, helios, stl
3
3.0
May 2, 2021
05/21
May 2, 2021
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
The PL mount rear lens cap is designed with 4 protrusions shapes for easy hand grip. There is enough room in the rear to fit on other PL mount lenses. File sharing is for sharing ideas. Use it for personal use only. Commercial use is not permitted. If you found my designs useful, please donate what you think it is worth to my paypal.me. Your donation will be useful for a new housing design on a variety of lenses. https://paypal.me/suplusperson
Topics: lens_cap, arri, rear_cap, Camera, thingiverse, pl_mount, stl
4
4.0
Apr 20, 2021
04/21
Apr 20, 2021
by
Edward Park (DoNotLeaN)
data
eye 4
favorite 0
comment 0
In this video, the upgraded lens housing is optimized for Tokina AT-X PRO 16-28mm f2.8 Nikon (G_type) mount lenses. There is a Canon mount version of the 16-28mm f2.8, but I think it won't fit because of the different shape on the back. The optical performance of this lens is very satisfactory, but the lens itself weighs 946 g, which is very heavy. And since it was designed as an AF lens, it was not very convenient for manual operation. Therefore, I wanted to upgrade the lens housing to make...
Topics: stl, lens, cine, rehousing, Camera, thingiverse, cinema, tokina
3
3.0
Mar 21, 2021
03/21
Mar 21, 2021
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
The upgraded lens housing in this video is optimized for Tokina RMC 35-105mm f3.5 FD mount lenses. There are a number of different camera mount types of lenses, as well as sibling lenses with almost similar optical configurations available under brands such as Vivitar and Hoya. I think these lenses will not fit well with this lens housing because of the difference in appearance and focus ring operation method. The Tokina RMC 35-105mm f3.5 is an older zoom lens made in the late 70s. I had a...
Topics: stl, Zoom, camera, Tokina, lens, housing, Camera, thingiverse
4
4.0
Mar 10, 2021
03/21
Mar 10, 2021
by
Edward Park (DoNotLeaN)
data
eye 4
favorite 0
comment 0
The upgraded lens housing in this video is optimized for the Tokina AT-X PRO 28-70mm f2.6-2.8 Nikon mount lens. I expect the AT-X PRO 28-70mm f2.8 lens of the same shape will fit, but I haven't tested it for fit. I think the Tokina AT-X PRO 28-70mm f2.6-2.8 is a lens with excellent cost-effectiveness compared to its sturdy structure and optical performance. Regarding the optical configuration of this lens, there are rumors that it is similar to 'Angenieux zoom lens of the same specification'....
Topics: stl, lens, housing, zoom, Camera, thingiverse, tokina
4
4.0
Mar 2, 2021
03/21
Mar 2, 2021
by
Edward Park (DoNotLeaN)
data
eye 4
favorite 0
comment 0
I wanted to create a multifunctional compact matte box that can be used lightly when shooting videos with a digital camera. A square filter (4 x4" & 4x 5.65 filter and 100 x100mm & 100 x 150mm) mounting holder is included, and the gradation filter is height adjustable and designed for effective use. It may be an upgraded version of the matte box that I shared over a year ago, but it's completely redesigned, with different figures in detail. So there is no compatibility between the...
Topics: matte_box, hood, thingiverse, DIY, stl, lens_hood
5
5.0
Feb 21, 2021
02/21
Feb 21, 2021
by
Edward Park (DoNotLeaN)
data
eye 5
favorite 0
comment 0
This lens housing is optimized for "Nikon nikkor 50mm f1.4 AI-S". The flange back of distance the Nikon F-mount lens is 46.50mm, which is relatively long among general SLR still camera lenses. Therefore, Nikon F mount lens has the advantage of being able to use a simple conversion adapter to attach and use not only digital mirrorless cameras but also other SLR cameras such as Canon EF mount cameras and Sony A (Minolta AF) mounts. Designed to be secured using multiple M5 (6 pcs) and M4...
Topics: lens, 50mm, thingiverse, nikon, Camera, camera, stl
4
4.0
Feb 15, 2021
02/21
Feb 15, 2021
by
Edward Park (DoNotLeaN)
data
eye 4
favorite 0
comment 0
This custom sun hood is optimized for Atmos Ninja V. (I think it can be mounted on a similar Shinobi, but the actual attachment test on Shinobi has not been completed yet) Some modifications to the design of the previous version of the sun hood. (Reduce the length of the sunshade and modify it to a compact form) It is designed to increase utilization by adding an SSD holder. (Add 1/4" screw hole to SSD holder on the back of Ninja V) - The SSD holder is not compatible with previous Sunhood...
Topics: hood, thingiverse, ninja, Camera, monitor_hood, monitor, ssdholder, Atomos, stl, sunhood, shinobi
5
5.0
Feb 7, 2021
02/21
Feb 7, 2021
by
Edward Park (DoNotLeaN)
data
eye 5
favorite 0
comment 0
This lens housing is optimized for "Super-Multi-Coated Takumar 105mm f/2.8". Due to differences in shape and size, the housing may not fit for other versions of Takumar lenses. See the links below for information on each version! https://www.pentaxforums.com/lensreviews/Super-Multi-Coated-TAKUMAR-Super-Takumar-105mm-F2.8.html This is a Cinematic lens housing that improves the MF lens (Super-Multi-Coated Takumar 105mm f/2.8) of older SLR cameras for video shooting. Also, since we...
Topics: thingiverse, lens_rehousing, vintage_lens, takumar, Camera, stl, rehousing, lens_housing
7
7.0
Feb 3, 2021
02/21
Feb 3, 2021
by
Edward Park (DoNotLeaN)
data
eye 7
favorite 0
comment 0
This video is intended to reduce structural noise or vibration transmitted through the mounting section when mounting a microphone or audio (voice) external recorder. (Shock mount for vibration attenuation through elastic suspension) It is designed as an additional accessory that attaches a microphone or audio recorder to a camera unit or rig through a 1/4" screw, and can be combined with a cold shoe at the user's option for increased utilization. [Required parts] Elastic (rubber) files...
Topics: thingiverse, Camera, suspension, stl, shock_mount
4
4.0
Jan 30, 2021
01/21
Jan 30, 2021
by
Edward Park (DoNotLeaN)
data
eye 4
favorite 0
comment 0
This custom lens housing is optimized for Super Takumar 50mmf1.4_8 elements (early version. M42 mount). 7- and 8-elements lens may not be completely matched due to small differences in shape size. (The 7-element lens is slightly larger than the 8-element lens) I uploaded a file with some figures (61.5mm outer diameter of the focus ring, etc.)applied to fit the super-Takumar 50mm f1.4 later version, but the actual assemly of this version No tests were made. See the link below for information...
Topics: lens, thingiverse, Camera, camera, Takumar, stl, lens_housing, housing
4
4.0
Jan 24, 2021
01/21
Jan 24, 2021
by
Edward Park (DoNotLeaN)
data
eye 4
favorite 0
comment 0
This is a video on how to use a 3D printer with 3D modeling and printing to create a universal extension arm and handle (fusion of rosette and friction joint adjustment) for a shoulder rig. (If necessary, use the link below to download and use the shared file for free.) This shoulder rig extension arm and handle is designed to be compatible with other accessories with Arri Rosette connections. (The applicable rosette diameter is 32mm or 31.8mm.) For the shoulder rig base plate, see the video...
Topics: thingiverse, Handle_Grip, Camera, camera_rig, stl, camera_handle, shoulder_rig
4
4.0
Jan 19, 2021
01/21
Jan 19, 2021
by
Edward Park (DoNotLeaN)
data
eye 4
favorite 0
comment 0
This is a video on how to use a 3D printer to create a universal extension arm and handle for a shoulder rig through 3D modeling and printing. (Use the link at the bottom below to download files shared for free) These shoulder rig extension arms and handles are designed to be compatible with other accessories with Arri Rosette connections. (The applied rosette diameter is 32mm or 31.8mm) For the shoulder rig base plate, refer to the video and file from the previous episode 01. The rosette...
Topics: arri_rosette, thingiverse, rosette, Camera, camera_rig, stl, camera_handle, shoulder_rig, rig
4
4.0
Jan 15, 2021
01/21
Jan 15, 2021
by
Edward Park (DoNotLeaN)
data
eye 4
favorite 0
comment 0
This is a video on how to create a universal base plate for a shoulder rig by 3D modeling and printing using a 3D printer. (The output of this video is a prototype version, so it is slightly different from the shared version in the link below) This shoulder rig base is designed to be compatible with Manfrotto 501 PL plate and 15mm rod specifications. (It is reflected in the design to be partially compatible with the Sony CVT-14 quick release system, but some parts need to be added for normal...
Topics: arri_rosette, thingiverse, rosette, Camera, stl, base_plate, shoulder_rig
3
3.0
Dec 31, 2020
12/20
Dec 31, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
This custom lens housing is optimized for "SLR magic 18mm f2.8 CINE(Sony E mount)". My personal impression of this lens is that it is a small, inexpensive manual ultra-wide angle lens, and best of all, it can attach directly to a digital mirrorless camera without an adapter. Personally, the optical performance wasn't very satisfactory, but considering the price it's a bit convincing. Above all, it is impressive for its very sturdy build quality and heavy and stable manual operation....
Topics: SLR, stl, SLR_magic, Camera, Cine, thingiverse, Lens_housing
4
4.0
Dec 20, 2020
12/20
Dec 20, 2020
by
Edward Park (DoNotLeaN)
data
eye 4
favorite 0
comment 0
This is an improved version of the top handle that allows wired remote control to the previously uploaded top handle. We apologize for the incompatibility of the part with previous design versions due to structural issues. The top handle is a combination of commercially available remote units, and the top handle is designed to mount 'FOTGA RM-VS1' for Sony mirrorless cameras or 'RM-VP1' for Panasonic GH cameras. For details on the types of cameras that can be used, refer to the product...
Topics: handle, grip, camera_grip, stl, Camera, fotga, top_handle, thingiverse
3
3.0
Dec 14, 2020
12/20
Dec 14, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
This custom sun hood is optimized for Atmos Ninja V. (I think it can be mounted on a similar Shinobi, but the actual attachment test on Shinobi has not been completed yet) The ninja v sunhood is designed to provide an enhanced viewing experience even in harsh lighting conditions. (Sun visor for outdoor photography. Stable protection from the sun and ambient light) It is designed to fit snugly into the ninja V's outer shape and the four upper and lower grooves, so it is designed to allow easy...
Topics: stl, camera_gear, atomos, Camera, shinobi, ninja, sunhood, ninja_v, thingiverse, sunshade, camera
3
3.0
Dec 9, 2020
12/20
Dec 9, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
This custom lens re-housing is optimized for "Canon FD 85mm f/1.8 S.S.C". This video is the last version of the lens re-housing series, paying homage to the K35 CINE Prime Lens. It's a bit unfortunate that I can't get a Canon FD 85mm f/1.2 lens for personal reasons. So I replaced it with the FD 85mm f1.8 S.S.C, but I think this lens is also a great vintage lens and is attractive enough for general use. This lens re-housing was very similar to the conventional "FD 35mm F/2...
Topics: lens_rehousing, rehousing, canon, Camera, thingiverse, lens, canon_FD, 85mm, stl
3
3.0
Dec 6, 2020
12/20
Dec 6, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
When taking panoramic photos or panning videos, the axis of rotation should be flat. There are many ways to level the camera, but I think the leveling base is a useful camera device that allows you to level quickly and easily. Half ball and bowl are a popular method for professional video heads and tripods. Leveling is quick and easy with an intuitive method of use. In film/video professional shooting equipment, 150mm, 100mm, etc. are preferred and are very sturdy and stable. However, it's too...
Topics: bowl, half_ball, leveling_base, Tripod_level, Camera, bowl_adapter, thingiverse, 100mm, 75mm,...
3
3.0
Dec 2, 2020
12/20
Dec 2, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
This custom lens re-housing is optimized for "Canon FD 50mm f / 1.4 S.S.C". I wanted to create a set of lenses that pay homage to the k35 Cine Prime. The k35 Cine Prime shares most of its optical design with Canon FD lenses, so I tried to accommodate the Canon FD Prime lenses again to fit the Cine lens standard. Of the first set of lenses planned, the canon FD 50mm was not planned. However, I thought the re-housing for this lens, which is the most popular, many people have and still...
Topics: stl, lens, Lens_Adapter, Camera, canon, 50mm, thingiverse, canon_FD, lens_hood
3
3.0
Nov 27, 2020
11/20
Nov 27, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
Camera top handle grips are particularly useful for carrying cameras or for handheld video shooting, especially at low angles. However, a general DSLR or digital mirrorless camera is a design that considers shooting at a general eye level, and it is a little inconvenient to mount a top handle because it is compact and simplified for portability and ease of use. It is often mounted on the top hot shoe, but the hot shoe itself seems to be insufficient to fully bear the weight of the camera and...
Topics: handle, grip, camera_grip, stl, Camera, top_handle, thingiverse, camera_handle
4
4.0
Nov 22, 2020
11/20
Nov 22, 2020
by
Edward Park (DoNotLeaN)
data
eye 4
favorite 0
comment 0
The plate mounting method of the tripod head is diverse and in many cases is not compatible with each other, so it is often inconvenient to use only a dedicated dovetail plate suitable for it when used together. In particular, since the plate type of "Arca-Swiss dovetail", a representative tripod head fixing method for amateur photographers, and the plate type of "Mantfrotto 501", which is a light type 501 video head, are different, it was cumbersome and cumbersome to change...
Topics: stl, manfrotto_501, alcachofa_de_la_ducha, Camera, dovetail, plate, Manfrotto, thingiverse
5
5.0
Nov 15, 2020
11/20
Nov 15, 2020
by
Edward Park (DoNotLeaN)
data
eye 5
favorite 0
comment 0
"Turn vintage still lens into Cine-style prime lens" This custom lens re-housing is optimized for "Super Takumar 35mm f/2 (M42 mount, early version)". This lens is an interchangeable vintage prime lens for 35mm still cameras made by Pentax from 1963 to 1966. (It is a retro-focus type optical design that is rarely used in the latest lenses, and despite this old-fashioned optical design), it is one of my personal favorites because of its excellent optical performance and a...
Topics: stl, lens, lens_rehousing, Camera, Takumar, thingiverse, camera
4
4.0
Nov 11, 2020
11/20
Nov 11, 2020
by
Edward Park (DoNotLeaN)
data
eye 4
favorite 0
comment 0
This custom lens re-housing is optimized for "Helios-44-2 58mm f/2 (M42 mount)". The history, features and specifications of this famous Russian lens are very well known, so there is no need to add a description. This lens housing has a front diameter of 95mm and the focal gear is also applied with a 0.8M standard gear pitch applied to cinema lenses. (Focus & aperture gear Outer diameter 81.6mm / 100T) The design of this lens housing is more convenient to use in combination with a...
Topics: stl, lens, lens_rehousing, Camera, helios, thingiverse, Helios_44-2
4
4.0
Oct 24, 2020
10/20
Oct 24, 2020
by
Edward Park (DoNotLeaN)
data
eye 4
favorite 0
comment 0
This custom lens re-housing is optimized for "Rocky Non / Samyang (POLA) 35mm f / 1.4 still lens and 35mm T1.5 cine lens". These lenses have different names for lenses for still cameras and for VDSLR cine lenses, but the actual optical design is the same (the shape of the focus ring and aperture ring are slightly different), and the diameter of the front of the lens is the same, The mount standard for attaching the hood is the same, so the internal structure is almost the same, so I...
Topics: EF_mount, stl, lens, Samyang, lens_rehousing, Camera, thingiverse, 35mm, Rokinon
3
3.0
Oct 21, 2020
10/20
Oct 21, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
This is designed to block external lighting when using a smart phone as an external field monitor via Wi-Fi. The hood reduces glare and ensures a clear, bright screen when shooting outdoors or in bright lighting. This monitor hood is designed for iPhone 6, 7, 8 and Plus, with the addition of a separate file designed to shoot directly using the smartphone rear camera. It is designed to use a commercially available smartphone holder (tripod adapter) to secure the smartphone, and requires a 1/4...
Topics: stl, iphone, Mobile Phone, sunhood, thingiverse, monitor, sunshade, hood
3
3.0
Oct 9, 2020
10/20
Oct 9, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
This custom lens re-housing is optimized for "Rokinon / Samyang 24mm T1.5 ED AS IF UMC II Wide Angle Cine Lens". This lens has a standard gear and is indicated by its official name as a cine lens, but in actual use, the outer diameter of the focus gear is small, so it is inconvenient to readjust the follow focus or lens support settings every time. I wanted to increase the benefits such as lens replacement by applying the same appearance (specifications) as the previously made Canon...
Topics: rokinon, stl, lens, lens_rehousing, Camera, samyang, follow_focus, thingiverse, cine
3
3.0
Oct 4, 2020
10/20
Oct 4, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
I wanted to make a side handle for the camera that was easy to hold, stable, and light, so it was easy to use. Since I am not familiar with the ergonomic design, I had to design the handle grip after several modifications in a form that is comfortable to hold with my hand. My hands are of normal (but by no means large) size, so I think the design of this grip is probably suitable for most people as well. I think one of the most important points in the design of the side handle grips is that...
Topics: handle, grip, stl, side_handle, Camera, arri, Handle_Grip, thingiverse, arri_rosette, camera
3
3.0
Sep 29, 2020
09/20
Sep 29, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
This custom lens re-housing is optimized for "Canon FD 55mm f/1.2 S.S.C". I wanted to create a set of lenses that pay homage to the k35 Cine Prime. The k35 Cine Prime shares most of its optical design with the Canon FD lens, so we tried to re-house the Canon FD Prime lens to fit the Cine lens standard. However, it does not reach a level similar to the K35 Cine Prime due to several issues. The 55mm focal length K35 Cine Prime(K35 55mm T1.4) is similar to the optical design of the FD...
Topics: stl, lens, lens_rehousing, Camera, canon, thingiverse, 55mm, canon_FD
5
5.0
Sep 23, 2020
09/20
Sep 23, 2020
by
Edward Park (DoNotLeaN)
data
eye 5
favorite 0
comment 0
This custom lens re-housing is optimized for "Canon FD 24mm f/2.8 S.S.C. I wanted to create a set of lenses that pay homage to the k35 Cine Prime. The k35 Cine Prime shares most of its optical design with the Canon FD lens, so we tried to re-house the Canon FD Prime lens to fit the Cine lens standard. However, it does not reach a level similar to the K35 Cine Prime due to several issues. The 24mm focal length K35 Cine Prime is similar to the optical design of the FD 24mm f1.4 Aspherical,...
Topics: stl, lens, lens_rehousing, Camera, cine, canon, CineWhoop, cinema, thingiverse, canon_FD
3
3.0
Sep 19, 2020
09/20
Sep 19, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
This custom lens re-housing is optimized for "Canon FD 35mm f/2 SSC. The Canon FD 35mm f/2 SSC lens has two versions of the lens with different optical configurations. Both versions are roughly similar in appearance, so I guess they will both fit, but the lens in the video is the second version, and the initial version has not been tested for mounting the housing. Early versions of the FD 35mm f/2 SSC feature a concave optical glass on the front of the lens and have issues with radiation...
Topics: stl, lens, Camera, canon, thingiverse, canon_FD
3
3.0
Sep 9, 2020
09/20
Sep 9, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
"Square ring-shaped gimbal dual handle grips useful for a variety of grip styles" This gimbal grip is optimized for Zhiyun Crane V2. I think that the ring grip and the gimbal fixing clamp can be designed differently so that it can be attached to various gimbals. (Because this is a video for sharing ideas, we cannot respond to requests for clamp modeling of individual gimbal products.) The clamp modeling file for Crane 2 is also added to the download file, but this has not been tested...
Topics: gimbal_protector, stl, gimbal, Camera, gimbal_grip, thingiverse
3
3.0
Sep 2, 2020
09/20
Sep 2, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
I wanted to make a device for fixing various functions that can be easily fixed to various portable devices used for video recording and can be fixed to a belt if necessary. Designed to fit the most common "Arca Swiss" dovetail and "NATO" rail systems with a variety of quick release clamps to hold camera accessories. This clip is secured to the portable device via a 1/4" screw (1/4" screw is most commonly used in camera accessories), so you need a 1/4" screw.
Topics: stl, belt_clip, nato_rail, NATO, arca_swiss, quick_release, thingiverse, clip, DIY
3
3.0
Aug 28, 2020
08/20
Aug 28, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
This custom lens Re-housing is optimized for "Industar-61 52mm f/2.8 (M39 mount)". For more information on the lens, please refer to the link below. http://www.sovietcams.com/index.php?346352902 Industar-61 has been manufactured for about 40 years, and various versions exist. Despite the similar appearance, the optical focal lengths such as 50mm, 52mm, and 55mm are also slightly different. This custom lens housing has not been tested for the possibility of mounting on other versions...
Topics: industar, stl, lens, lens_rehousing, Camera, thingiverse, camera
13
13
Aug 24, 2020
08/20
Aug 24, 2020
by
Edward Park (DoNotLeaN)
data
eye 13
favorite 0
comment 0
This custom lens housing is optimized for "Jupiter-12 2.8/35 (Contax RF/Kiev mount)" For more information on the lens, please refer to the link below. http://www.sovietcams.com/index.php?4148306547 Since the aperture control part of this lens is inside the front of the lens, it is necessary to look into the camera from the front to control the aperture. And it is a stepless operation method, and it is not easy to control because the projection is small. The part for focusing is also...
Topics: lens, thingiverse, jupiter, Camera, stl, lens_rehousing
3
3.0
Aug 21, 2020
08/20
Aug 21, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
This custom lens housing is optimized for "Jupiter-3 50mm f1.5 (VALDAI -Valdaijsky zavod Jupiter)" Applicability to the jupiter 3 lens manufactured by KMZ and ZOMZ (Zagorsky Optiko-Mechanichesky Zavod) and the recently manufactured reprint lens Jupiter-3+ by Lomo has not been tested. (It may be applicable because it looks almost the same) "The Jupiter 3 is an 50 mm f/1.5 lens made in the Soviet Union. It is based on the design of the Sonnar." Jupiter-3 lens is one of the...
Topics: lens, thingiverse, camera, jupiter, Camera, stl, lens_rehousing
3
3.0
Aug 18, 2020
08/20
Aug 18, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
This custom lens housing is optimized for "Super-Multi-Coated TAKUMAR 55mm f/1.8" The Takuma 55mm f1.8 lens was released in nine versions from 1958 to 1975. Their optical design and structure are almost the same, but there is a small difference in appearance size. This housing has not been tested to see if it can be properly mounted on lenses other than "Super-Multi-Coated TAKUMAR 55mm f / 1.8". For more information on the lens, please refer to the link below....
Topics: lens, thingiverse, Takumar, camera, Camera, stl, housing
3
3.0
Aug 14, 2020
08/20
Aug 14, 2020
by
Edward Park (DoNotLeaN)
data
eye 3
favorite 0
comment 0
This custom lens housing is optimized for "Auto-TAKUMAR 35mm f/3.5" Manufactured in the 60s and 70s, the Takuma 35mm f/3.5 has several versions on the market. The Auto-takumar 35mm f3.5 is an early version and a very small interchangeable SLR lens (M42 mount). Please refer to the link below for the detailed specifications of this lens. https://www.pentaxforums.com/lensreviews/S-M-C-Super-Auto-Takumar-35mm-F3.5.html Since the M42 mount has a shorter flange back distance than the PL...
Topics: Camera, stl, thingiverse
