3
3.0
Jun 20, 2021
06/21
by
Lucas Pfaff (LucMeister)
data
eye 3
favorite 0
comment 0
made to work along my GrabHole QR adapter: https://www.thingiverse.com/thing:4510106 https://www.youtube.com/watch?v=ezIV-Lh-_lA This clamp offers a strong support for anamorphic lenses. The diameter is roughly 70mm and therefore works with many many lenses. I successfully tested the following scopes: - Kowa Prominar 16H/8Z, B&H - Sankor Type-5e - Schneider Kreuznach Cinelux ES - Sankor CompactCinemascope/AnamoPrime - Iscomorphot 16/2x ISCO Ultra-Star lenses should work as well, as a...
Topics: stl, thingiverse, Camera
3
3.0
Jun 11, 2021
06/21
by
Lucas Pfaff (LucMeister)
data
eye 3
favorite 0
comment 0
This adapter lets you use Canon EF lenses on the Leica L-Mount, e.g. for use on the Sigma fp, the Panasonic S-Series or, of course, the corresponding Leicas :) The lens is meant to be a bit angeled, as I find this more pleasing for video- as well as photo-work. The adapter is aimed at manual- or adapted lenses, as it naturally has no electronical contacts (so you can't adjust the aperture or use autofocus on electric lenses). The adapter has some "wiggle room" so you will be able to...
Topics: l-mount, leica_l, lumix s, Camera, canon_ef, sigma fp, thingiverse, stl
15
15
Jun 20, 2021
06/21
by
Lucas Pfaff (LucMeister)
data
eye 15
favorite 0
comment 0
https://www.youtube.com/watch?v=ezIV-Lh-_lA This QR adapter allows for a secure connection of an anamorphic projection scope to a taking lens, while allowing a very fast taking-lens switch as well. An additional goal with this adapter is to keep the optical chain as short as possible while maintaining security for every piece of glas. The only things seperating the scope and the taking lens is the wall-thickness of a stepper ring, so only around 1,4mm. This sounds like a lot, but no commercial...
Topics: thingiverse, Anamorphic_lens, stl, anamorphot, quick_release, Camera, quickrelease, anamorphic
3
3.0
Jun 20, 2021
06/21
by
Lucas Pfaff (LucMeister)
data
eye 3
favorite 0
comment 0
This ring is the original base for the stand-alone Grabhole adapter: https://www.thingiverse.com/thing:4510106 This QR adapter for the Rapido v3 anamorphic clamp (https://www.rapidotechnology.com/products/clamp-package/v3-clamp-large) allows for a secure connection of an anamorphic projection scope to a taking lens, while allowing a very fast taking-lens switch as well. Faster than Rapidos original solution, and much cheaper as well :) works with and without the FMJ as well, but for obvious...
Topics: hardcoredna, thingiverse, clamp, FMJ, stl, Rapido, Camera, fvd, anamorphic
5
5.0
Jun 7, 2021
06/21
by
Lucas Pfaff (LucMeister)
data
eye 5
favorite 0
comment 0
NOTE: all photos of Kompi show an older intermediate version of this model; unfortunately my printer broke and I could not print a finished version so far KOMPI is a fully functioning clip-on Mattebox for 80, 95 or 114mm and either one 4x4 or 4x5,65 filter (the 114mm backplate is experimental and might be too weak, use with caution). The Filter is as close to the lens as possible and also withing the box itself and therefore somewhat secured from stray light. Assembled it weights only around...
Topics: filter, tilta, wooden, arri, thingiverse, mattebox, shape, stl, Camera, fotga, matte, box,...
5
5.0
Jun 11, 2021
06/21
by
Lucas Pfaff (LucMeister)
data
eye 5
favorite 0
comment 0
This adapter lets you use Nikon-F lenses on the Leica L-Mount, e.g. for use on the Sigma fp, the Panasonic S-Series or, of course, the corresponding Leicas :) The lens is meant to be a bit angeled (see image), as I find this more pleasing for video- as well as photo-work. You can of course also mount Nikon G lenses, but you won't be able to adjust the aperture of course. The adapter has some "wiggle room" so you will be able to reach infinity, but the scales won't be accurate. The...
Topics: sigma_fp, leica, l-mount, nikon, leica_l, Camera, nik, thingiverse, lumix_s, nikon_f, stl
3
3.0
Jun 7, 2021
06/21
by
Lucas Pfaff (LucMeister)
data
eye 3
favorite 0
comment 0
A simple holder for a pop-filter. You screw it between the mic and its suspension holder; this print won't touch the suspension or any other part of the body, obviously The pop-filter attaches to a simple spigot, 8mm diameter; I used a simple one from König & Meyer (K&M). I used 0,28mm layer height, this is a functional part :) 15% infill is enough. Will need supports.
Topics: stl, Audio, thingiverse
4
4.0
Jun 7, 2021
06/21
by
Lucas Pfaff (LucMeister)
data
eye 4
favorite 0
comment 0
WARNING: this mod will void your warranty and can possibly damage or even break your headphones! Read carefully and make sure that you can follow each step BEFORE you order, disassemble, solder or cut anything! This replacement-cap for the Superlux HD-681 headphones enables you to install a 3,5mm audio-hack instead of the original far-too-long 3m cable! Installation is straight forward: you unscrew the original (remove the cover with a knife our your fingernails to get to the screw), unsolder...
Topics: stl, Audio, thingiverse
