3
3.0
Jan 6, 2021
01/21
by
Tim Lennard (lensfort)
data
eye 3
favorite 0
comment 0
Specifically made for Quest 2 and it's Controllers. The Quest 2 differs from the original Quest in many dimensions. This wall mount specifically cradles the quest 2 within the gap between the lenses and body. Resting on the actual body for maximum stability. Colouring of the logo is simply done with a marker. Items will come uncoloured for user to colour if they wish. Do not use this with Quest 1 or any other HMD To place Quest 2 on the mount, put quest up against the mounted wall and gently...
Topics: Oculus, stl, Video Games, Oculus Quest 2, oculus_quest, thingiverse
6
6.0
Mar 17, 2021
03/21
by
Tim Lennard (lensfort)
data
eye 6
favorite 0
comment 0
This case was designed to go along with my Octoprint and Plugin for PSU Control (https://github.com/kantlivelong/OctoPrint-PSUControl) to switch the active line on a 240VAC power cord safely. Other cases were too open and didnt provide a tight cable grip. It uses the skinny single board (usually blue) relays from china. Usually having a green and red LED and having the contacts terminal very close to the end of the board. Use M3 6mm screws along with the brass melt in nuts. I take no...
Topics: cover, power, stl, Octoprint, Safety, thingiverse, single, Electronics, relay, case
4
4.0
Mar 22, 2021
03/21
by
Tim Lennard (lensfort)
data
eye 4
favorite 0
comment 0
I couldn't find a Oculus Rift S mount that hung it lens-down and was stable, so I made one. Modeled off the stripped down Rift S base. See pic Inadvertently it also fits the Rift CV1 and the Quest. As these two both have a webbing between the outside of the lens and the edges, it still holds at 3 points. Designed to be printed without supports. 2x 5mm bolts or screws are needed. Full set https://www.thingiverse.com/thing:3678066 - Oculus Rift S, Quest, CV1 Wall Mount...
Topics: Rift_S, Oculus_Rift, stl, Oculus_Rift_S, Video Games, oculus_quest, mount, wall_mount, Oculus,...
4
4.0
Mar 9, 2021
03/21
by
Tim Lennard (lensfort)
data
eye 4
favorite 0
comment 0
Improved version. Smaller, slimmer version and only 3x M5 wood screws. 2x 12-15mm and 1x 23-25mm for the 45 degree version and 3x M5 wood screws 22-25mm for the horizontal version. No more fiddly M3! Also, no adapters, using extension cables instead. I'm in Australian. I purchased these below and designed around these. Ugreen Display Port Male To Female Extension Cable 1m Acbugn10226 (https://www.i-tech.com.au/ugreen-display-port-male-to-female-extension-cable-1m-acbugn10226.html) Astrotek Usb...
Topics: USB_30, DisplayPort, stl, thingiverse, Oculus_Rift_S, Video Games, Oculus
4
4.0
Mar 16, 2021
03/21
by
Tim Lennard (lensfort)
data
eye 4
favorite 0
comment 0
Topics: stl, 3D Printing, thingiverse
4
4.0
Mar 22, 2021
03/21
by
Tim Lennard (lensfort)
data
eye 4
favorite 0
comment 0
Yeah I could have used a headphone wall mount. But I wanted one that was custom. Fits the cables for both the Rift CV1 and Rift S Designed to be printed without supports. I used a black permanent marker to colour in the logo. Full set https://www.thingiverse.com/thing:3678066 - Oculus Rift S, Quest, CV1 Wall Mount https://www.thingiverse.com/thing:3678073 - Oculus Rift S or Quest Controller Wall Mount https://www.thingiverse.com/thing:3678079 - Oculus Cable Wall Mount (or headphones)
Topics: cable_holder, stl, headphones, Oculus_Rift_S, Wall_Hanger, cable, Video Games, wall_mount,...
11
11
Jun 20, 2021
06/21
by
Tim Lennard (lensfort)
data
eye 11
favorite 0
comment 0
Unless you have a smart charger for your eBike, it's hard to know when the battery is charged. This is a small Voltmeter/Ammeter, designed to go between battery and charger to tell the voltage and amps being delivered. It can also be used in between battery and motor/controller to show remaining charge. Although I havent designed any mounts for it to go on the bike Can be used in any project where measuring 30-100V is needed up to 3A Based on simple $3 Voltage Current indicators from china, 2x...
Topics: USB, Battery_powered, ebike, thingiverse, voltmeter, Rechargeable, Electronics, stl, 18650, Ammeter
8
8.0
Jan 17, 2021
01/21
by
Tim Lennard (lensfort)
data
eye 8
favorite 0
comment 0
I had some Official Minecraft foam tools that I didn't really want the kids getting to and ruining, so I made up a mount to put them up on the wall. I had the idea for ages, just never got around to making it. Both should print well and fit snug. I personally have mine mounted with 3M removable double sided tape tabs and holds up well (a week so far). But I included holes for mounting via screws if you like
Topics: Minecraft_Sword, Decor, Minecraft_Axe, Minecraft, minecraft wall mount, thingiverse,...
9
9.0
Apr 17, 2021
04/21
by
Tim Lennard (lensfort)
data
eye 9
favorite 0
comment 0
Using some NTAG215 stickers, I designed some Amiibomb! (Amiibo) tags for use with many of my games. I didnt like the other ones I found, as the embedded text looks terrible when shaped differently and I just wanted to see the pictures really. These are slim and easy to hold to the sensors without fumbling out of my fat man hands. I made a single A4 print out that I got printed locally on GSM 210 gloss paper and some double sided tape. If you want to use my picture template, please print at 100%...
Topics: NTAG215, thingiverse, stl, Video Games, arduino, amiibo
3
3.0
Oct 26, 2021
10/21
by
Tim Lennard (lensfort)
data
eye 3
favorite 0
comment 0
I loved the Switch cart idea, but wanted it larger. An amalgamation of two items. I remeshed these items and edited. A double Switch Cartridge Rolodex that holds 48 games! Required Part Quantities: 2 - Double_RollerSide.3mf 1 - Double_Hub.3mf 2 - Double_FrameSide.3mf 1 - Double_FrameBase.3mf 24 - Double_Switch_Card_Holder.3mf 10 - 3mm x 0.5mm x 10mm or longer Socket Head Cap Screw The original rolodex for SD card is not for profit, so please honor the creator's wishes. Added FrameSide.STL to...
Topics: nintendo_switch, switch, cartridge, stl, thingiverse, nintendo_cartridge, Video Games, Rolodex
4
4.0
Mar 9, 2021
03/21
by
Tim Lennard (lensfort)
data
eye 4
favorite 0
comment 0
UPDATE: Improved Version 2 here https://www.thingiverse.com/thing:3659896 This mount allows for a 45 degree downward facing breakout for a DisplayPort and USB3.0 extension. Specifically made for Oculus Rift S. The downward facing angle will put less stress on your plugs. Mount the mount to the underside of your desk first with the M5 screws. Pre-drilling pilot holes. Holes in the adjoining side let the screwdriver through. Fit the cables to the cable mount. Choose whichever up/down orientation...
Topics: Oculus_rift_s, USB_30, stl, thingiverse, Video Games, Oculus, DisplayPort
9
9.0
Mar 10, 2021
03/21
by
Tim Lennard (lensfort)
data
eye 9
favorite 0
comment 0
For a mate I whipped up this dice tray with a lid. 20cm x 20cm should mean that it should fit almost all prusa style printers. Lid groove means that it doesnt need support Sketchup file included. The lid says ARMIES on it. The tray says HEROES and PUSSIES for reserve areas. However I uploaded a blank set also.
Topics: lid, tray, stl, thingiverse, dice tray, dice, Toy & Game Accessories
9
9.0
Jan 13, 2021
01/21
by
Tim Lennard (lensfort)
data
eye 9
favorite 0
comment 0
We have an RGB lighting system in our loungeroom and keep loosing the remote. So I made a cover to replace the snap-on cover for the Arlec branded light switch. Snap off the old one and snap on the new. Printed in PLA. Good luck finding a white to match the original switch. Close enough for me ;)
Topics: thingiverse, Organization, stl
4
4.0
Mar 10, 2021
03/21
by
Tim Lennard (lensfort)
data
eye 4
favorite 0
comment 0
I couldn't find an Oculus Rift S/Quest controller wall mount I liked, so I made one. https://www.thingiverse.com/thing:3617687 is nice, but I hated that the wrist strap needs to be threaded through each time. Gravity held, and to release simply tilt up. Supports are needed, and I suggest you add a few more. Will easily fit on a standard 200mm bed if printed diagonally. 2x 5mm bolts or screws are needed. I used a black permanent marker to colour in the logo Full set...
Topics: Oculus Controller, Oculus_Rift_S, stl, thingiverse, Oculus_Rift, controller, Video Games, Oculus
