2
2.0
Jun 26, 2021
06/21
by
#NoFilter With Zack Peter
audio
eye 2
favorite 0
comment 0
Joleen Lunzer, host/creator of 'Married to Bravo' joins #NoFilter with Zack Peter to spill the latest Bravo tea. We gab about: Brandi Glanville's return to Real Housewives of Beverly Hills Lisa Vanderpump's Exit Ramona Singer and Luann De Lesseps Fired from RHONY?! Kelly Bensimone's latest attack on Bethenny Getting blocked by Jax Taylor Place your order of FitVine Wines now and avoid tomorrow's hangover. Go to fitvinewine.com and use code ADULTING10 for 10% off your first order! Keep up with...
Topics: Podcast, Wellness, advice, bravotv, dish, entertainment, justplainzack, lifestyle, news,...
57
57
Jun 11, 2019
06/19
by
#NosVemosEnLasUrnas
audio
eye 57
favorite 0
comment 0
Entramos en el mes de las internas, y en nuestro podcast semanal, dedicado a las elecciones. Nos ponemos al día con las novedades más arbitrariamente seleccionadas de la semana. Seguí leyendo acá .
Topics: Política, Elecciones
3
3.0
Mar 10, 2021
03/21
by
(Devstroyer)
data
eye 3
favorite 0
comment 0
This is a smartphone stand for devices up to 11.5 millimeters thick. It is designed to support the phone in horizontal as well as vertical position, in the 15° angle.
Topics: stand, stl, thingiverse, smartphone, smartphone_stand, phone, Mobile Phone, Phone_Stand
7
7.0
Jun 11, 2021
06/21
by
(ForbiddenPrints)
data
eye 7
favorite 0
comment 0
Summary Sci-Fi Concrete Barricades set i designed for Tabletop war gaming or sci-fi rpg. Any feedback or critiques are welcome.
Topics: warhammer40k, 40k, tabletop, tabletop_rpg, thingiverse, wargaming, tabletop_gaming, warhammer_40k,...
4
4.0
Jun 11, 2021
06/21
by
(GoZX)
data
eye 4
favorite 0
comment 0
Summary I was inspired by Disenchantment, I included a few screenshots from the animation on Netflix. I incorporated a skateboard bearing in the bottom. I made a revision to the interior air shield to keep turbulence down around the candle. Someone would still need to design the leather ear covers to hold it in place.
Topics: thingiverse, stl
7
7.0
Jun 11, 2021
06/21
by
(HiProof)
data
eye 7
favorite 0
comment 0
Summary This is a overhead mount for a SwitchPros SP-9100 panel. It fits the 3rd generation Tacoma. I had a college lad make the stl for me. I would change a couple of things if I had the ability. I would narrow the print a bit, and make the 2 bosses on the bottom at least a inch deep to aid in mounting the print using a couple of hidden screws on each side. I would also contout the base to match the overhead console. If you make these changes please send me the modified stl for my own use....
Topics: thingiverse, 2017_toyota_tacoma, stl
3
3.0
Mar 21, 2021
03/21
by
(IOI671701)
data
eye 3
favorite 0
comment 0
Replacement for GM part 21097292 (also Auveco 19902) This is a hood support bar retaining clip for a Saturn S-series (and other GM models). The original one was nylon and eventually just broke. You can get them for $15+ for two plus S/H or you could spend hours designing a replacement one to print with Amazon purchased Hatchbox Nylon that costs a lot more... You wouldn't be here if you didn't know what solution I picked... I designed it off of the broken part (pictured with the printed part,...
Topics: Automotive, thingiverse, stl
3
3.0
Mar 22, 2021
03/21
by
(JeanClaude)
data
eye 3
favorite 0
comment 0
Inspired by this method to mount a GoPro: https://www.youtube.com/watch?v=XeCw_7eKGLE
Topics: fpv, GoPro, Amax, stl, GoPro_Mount, AMAXinno, fpv_camera_mount, R/C Vehicles, thingiverse
3
3.0
Mar 22, 2021
03/21
by
(JohnnieCat)
data
eye 3
favorite 0
comment 0
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130
Topics: Office, thingiverse, stl, customized
6
6.0
Jun 11, 2021
06/21
by
(L_Asdronaute)
data
eye 6
favorite 0
comment 0
Summary PLA 196 degrés 35 pour le plateau pour le supports camera ,mettre 1.04 en echelle sous cura si trop serrés avec supports partout couche 0.12 avec une buse en 0.4 remplissage 100%
Topics: thingiverse, stl
3
3.0
Jun 6, 2021
06/21
by
(Laryy)
data
eye 3
favorite 0
comment 0
Ersatzkappe für verschlissene Endkappen vom Trampolin. Bohrungs duchmesser 25mm Update: Habe eine V2 Hinzugefügt mit einem Bohrungsdurchmesser von 27mm
Topics: Trampolin, trampoline_net_holder, trampoline, trampolin_netz_halter, Endkappe, thingiverse, 3D...
3
3.0
Mar 22, 2021
03/21
by
(MajorCinamonBun)
data
eye 3
favorite 0
comment 0
None of the flexible filament extrudes were to my liking so I designed my own. I used the aluminum extruder tensioner bar but the standard one should work as well, and it should work on all Creality printers that use the same setup as the Ender 3. I've been successfully printing some NinjaFlex (85A) and haven't have a jam yet so I know it works. Please read all the notes first, as the part will not work without some post processing. Recommend adjusting the bracket before adding any filament by...
Topics: stl, Ninjaflex, extruder, 3D Printer Extruders, Ender3, Creality, flexible_filament,...
5
5.0
Jun 11, 2021
06/21
by
(Panzer1398)
data
eye 5
favorite 0
comment 0
Summary This model has been created in order to allow for quick and easier storage of the Xbox One controller, within a cabinet drawer. The stand should be attached to the inside of the drawer, using double-sided adhesive tape, hence allowing the controller to stand vertically up and use up less space compared to it being tossed in the drawer, staying horizontally. Print Settings Printer: Creality Ender 3 (w/ HeroMe Fan Duct) Rafts: No Supports: No Resolution: 0.2mm-0.3mm Infill: 10% Grid...
Topics: xbox, Xbox_One, thingiverse, stand, Xbox_one_controller, stl
7
7.0
Jun 11, 2021
06/21
by
(Rico38)
data
eye 7
favorite 0
comment 0
Summary Vous connaissez le principe du trusquin... Ici vous insérez la pointe de votre crayon dans le trou correspondant à la cote désiré (de 1 mm à 45 mm) pour tracer un trait parallèle au bord de la pièce en bois. Outils complet sur le blog : https://mesimpressions3dmaison.blogspot.com/p/mes-creations-trusquin.html
Topics: marking gauge, bois, thingiverse, marking, bricolage, stl
5
5.0
Jun 11, 2021
06/21
by
(SteveDave79)
data
eye 5
favorite 0
comment 0
Summary customized with 3D Slash!
Topics: thingiverse, 3D Slash, stl
11
11
Mar 10, 2021
03/21
by
(ThomasAndTugs)
data
eye 11
favorite 0
comment 0
I have finally managed to create a curve track from the straight track by rbwendt using only Tinkercad! Its been a challenge trying to get this to work.This is for all those people with little ones who love Thomas, but they don't feel like buying too many sets and wasting money on retired items. If you own sets from the newer Adventures and Trackmaster Push Along ranges, using the right adapters will allow you to connect this track to your sets. I recommend using this one for connecting to...
Topics: stl, thomas, thingiverse, Thomas_and_Friends, Toy & Game Accessories, Thomas_the_Train,...
4
4.0
Jun 6, 2021
06/21
by
(ThomasAndTugs)
data
eye 4
favorite 0
comment 0
(The Take-N-Play to Wooden Railway adapter in the top right of the first picture is https://www.thingiverse.com/thing:1986656) This is a Thomas And Friends Take 'N' Play / Take Along flexible track piece.There are two files: Take Along N Play - Flexible Track S.stl (small red one) Take Along N Play - Flexible Track L.stl (Printed one but gave it to someone else, will print another one later) Just so you know, this track is compatible with engines from the ranges: Take Along Take N Play (both...
Topics: Toy & Game Accessories, thomas, Thomas_and_Friends, thingiverse, stl, train_track,...
4
4.0
Jun 11, 2021
06/21
by
(Tukey_22)
data
eye 4
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = Your Text textstring2 = Next HiddenText = Bottom side add_a_special_character = none special_character = 9829 distance_special_char = .5 textsize1 = 16 textsize2 = 16 distance = 1.1 fontname1 = Bangers fontstyle1 = Regular fontname2 = same as fontname1>...
Topics: thingiverse, customized, stl
5
5.0
Jun 10, 2021
06/21
by
(URR NYC) Underground Railroad Radio NYC
audio
eye 5
favorite 0
comment 0
All rights reserved Cush DeyIntro: KRS-One Feat. Truck Turner - Bring It To The Cypher (Produced by DJ Premier)
Topic: Podcast
5
5.0
Jun 10, 2021
06/21
by
(URR NYC) Underground Railroad Radio NYC
audio
eye 5
favorite 0
comment 0
Parents Teach Elementary School Kids How To Sing Vulgar City Girls Lyrics?? ?? ?? ?? ?? ?? ??Just when you think you seen all. Children singing vulgar lyric before they know their ABC's. #citygirls #children #wrongera
Topic: Podcast
4
4.0
Jun 10, 2021
06/21
by
(URR NYC) Underground Railroad Radio NYC
audio
eye 4
favorite 0
comment 0
@darealdibiaseM.A.C.M (Monday Afternoon Cafe Music) Slapparatus is a decent journey into ever vibrant Californian beats phenomena. And a guide to it is non other than Mr. Dibiase aka Dibiase aka Dibia$e aka Diabolic's productions coming all the way from LA's very own Watts. Presented to you by Monday Jazz..Artwork by Andrius Lekstutis. You can find the tracklist after the jump.Dibiase - Slapparatus MondayJazz Mix1. be_real / selfish (green llama crew)2. bluntwraps / devonwho3. CB4...
Topic: Podcast
1
1.0
Jun 10, 2021
06/21
by
(URR NYC) Underground Railroad Radio NYC
audio
eye 1
favorite 0
comment 0
Get Your Q Coinhttp://greatawakeningcoin.com Use Code X22 ReportCheck Out The X22 Report Spotlight YouTube Channel - https://www.youtube.com/channel/UC1rn...Join the X22 Report On Steemit: https://steemit.com/@x22reportGet economic collapse news throughout the day visit http://x22report.comReport date: 06.09.2019The American are now using credit again, revolving credit debt has soared, which means that people are finding it hard to make ends meet. GoPro has said they are moving out of China...
Topic: Podcast
3
3.0
Jun 10, 2021
06/21
by
(URR NYC) Underground Railroad Radio NYC
audio
eye 3
favorite 0
comment 0
All rights reserved Cush DeyIntro: KRS-One Feat. Truck Turner - Bring It To The Cypher (Produced by DJ Premier)
Topic: Podcast
4
4.0
Jun 11, 2021
06/21
by
(Vandhanen)
data
eye 4
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:3516901 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3516901 Instructions Using the following options: string_1 = ASTA♥ string_2 = RONJA letterScaling = 1.5 additionalSpacing = 0 baseHeight = 3 width_of_space_character = minimal - 1.2 mm add_base_characters_where = nowhere what_base_characters = rotate_base_characters = -1 rotation_angle = 30 createPart = 4 BaseCharactersThickness = 1
Topics: thingiverse, customized, stl
4
4.0
Jun 11, 2021
06/21
by
(Wile)
data
eye 4
favorite 0
comment 0
Summary English I had a couple of spare fans from old computers. But the mounts were broken. So this is a new one ;-) Available in multiple versions: Thin / Thick: "Thin" has thiner walls but provides more room around the blades and let more space for air flow. I prefer this one. But use the "Thick" if your print with "Thin" goes wrong because of walls. Hole/Plain: with or without a hole on the bottom. Depends on the fan itself. Use the one you prefer ;-)...
Topics: ventilateur, cooling_fan, 40mm, fan, thingiverse, 40mm_fan_mount, Fan_mount, 40mm_fan, ventilo, stl
4
4.0
Jun 11, 2021
06/21
by
(Works-Of-Claye)
data
eye 4
favorite 0
comment 0
Summary a.Lighthouse Alert Lighthouse You know what it's like, you're on a deadline or driving all night with your hands wet on the wheel and only want to be distracted if it's an emergency. You need help to guide you away from the rocky shores of distracting social media. You also don't want your phone in your face because you know it's going to seduce you into checking all your usual social media addictions. So you tuck it safely from view - but what if an emergency arises and you need to be...
Topics: WearableFusion, DesktopFusion, thingiverse, fusion360challenge, stl
7
7.0
Jun 11, 2021
06/21
by
(_FranCis_)
data
eye 7
favorite 0
comment 0
Summary Forma na výrobu ledových špulek. (špulka ledu :D ) Netiskl jsem to (zatím). Takže nevím zda to nebude jen na jedno použití (jestli vůbec). Jestli to nějaký odvážlivec testne dřív než já, budu rád za fotku. ;) Ice spool form. (Spool of Ice: D) I didn't print it (yet). So I don't know if it will be a single use (if at all). If any daredevil tests it before I, I'll be glad for the photo. ;) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter...
Topics: thingiverse, stl
3
3.0
Jun 6, 2021
06/21
by
(adrienl)
data
eye 3
favorite 0
comment 0
This net pot fits the female end of a 4" PVC fitting and print without support.
Topics: Outdoor & Garden, thingiverse, stl, DIY_hydroponics, hydroponics
5
5.0
Jun 11, 2021
06/21
by
(benebrady)
data
eye 5
favorite 0
comment 0
Summary Here's my design for the Ender 3 Pro for those of you who are considering upgrading your controller board to the SKR 1.3 or the MKS Gen L boards. This should also work on the Ender 3, but there is another version for the Ender 3 that I have printed and tested on my own Ender 3 here. This is untested as I do not own an Ender 3 Pro printer. (I will gladly take a donation if someone wants to send me one!) All kidding aside... I need some feedback on this particular design. I just want to...
Topics: thingiverse, Ender 3 Pro, stl
4
4.0
Jun 19, 2021
06/21
by
(billiwhizz00)
data
eye 4
favorite 0
comment 0
Summary This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/esd6fiMrGhT
Topics: stl, thingiverse
3
3.0
Mar 22, 2021
03/21
by
(buZztiaan)
data
eye 3
favorite 0
comment 0
This is a wallmountable mount for PVC kazoos. I doubt anyone has as many of these as i do, but there you go.
Topics: holder, stl, kazoo, mount, kazoo holder, thingiverse, Music
4
4.0
Jun 11, 2021
06/21
by
(fo0f5150ii)
data
eye 4
favorite 0
comment 0
Summary Regular Screw Driver Holder. Print Settings Printer: Tevo Tornado Rafts: Yes Supports: No Resolution: .2mm Infill: 10% Filament: any PLA Notes: print with feet up & Rafts on. .STL should load with feet up.
Topics: thingiverse, stl
3
3.0
Mar 10, 2021
03/21
by
(goyetus)
data
eye 3
favorite 0
comment 0
REMIX original from : https://www.thingiverse.com/thing:2240686 This is his description: For a quite a while I have been using a finishing tool (https://alexa.design/2pnshBA) to clean up my 3D printed parts. However I wanted to have something a little more "customizable" as I have a ton various CNC bits around with 1/8" shafts which work great to really get the fine detail cleaning those hard to get places but hard to hold so I designed to hold those 1/8" inch (3mm) bits...
Topics: stl, thingiverse, Hand Tools
3
3.0
Jun 6, 2021
06/21
by
(hsiehty)
data
eye 3
favorite 0
comment 0
Another castle Dolce Gusto pod holder.
Topics: Kitchen & Dining, stl, thingiverse
4
4.0
Jun 12, 2021
06/21
by
(kintanarindustries)
data
eye 4
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Evan line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: thingiverse, customized, stl
5
5.0
Jun 11, 2021
06/21
by
(kintanarindustries)
data
eye 5
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Loida line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: thingiverse, customized, stl
4
4.0
Jun 12, 2021
06/21
by
(kintanarindustries)
data
eye 4
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Elvie line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: thingiverse, customized, stl
4
4.0
Jun 11, 2021
06/21
by
(kintanarindustries)
data
eye 4
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Ivy line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: thingiverse, customized, stl
4
4.0
Jun 11, 2021
06/21
by
(kintanarindustries)
data
eye 4
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Maricris line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: thingiverse, customized, stl
4
4.0
Jun 11, 2021
06/21
by
(kintanarindustries)
data
eye 4
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Lilia line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: thingiverse, customized, stl
5
5.0
Jun 11, 2021
06/21
by
(kintanarindustries)
data
eye 5
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Annabelle line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: thingiverse, customized, stl
4
4.0
Jun 11, 2021
06/21
by
(kintanarindustries)
data
eye 4
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Luigi line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: thingiverse, customized, stl
4
4.0
Jun 11, 2021
06/21
by
(kintanarindustries)
data
eye 4
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Fyra line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: thingiverse, customized, stl
4
4.0
Jun 12, 2021
06/21
by
(kintanarindustries)
data
eye 4
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Noel line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: thingiverse, customized, stl
5
5.0
Jun 11, 2021
06/21
by
(kintanarindustries)
data
eye 5
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Bobby line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: thingiverse, customized, stl
5
5.0
Jun 11, 2021
06/21
by
(kintanarindustries)
data
eye 5
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Badette line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: thingiverse, customized, stl
4
4.0
Jun 11, 2021
06/21
by
(kintanarindustries)
data
eye 4
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Tina line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: thingiverse, customized, stl
4
4.0
Jun 19, 2021
06/21
by
(kintanarindustries)
data
eye 4
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Joana line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: stl, thingiverse, customized
4
4.0
Jun 12, 2021
06/21
by
(kintanarindustries)
data
eye 4
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Corazon line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: thingiverse, customized, stl
4
4.0
Jun 11, 2021
06/21
by
(kintanarindustries)
data
eye 4
favorite 0
comment 0
Summary Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = America line2 = line3 = line4 = line5 = ruler_unit = 10 character_spacing = 1 line_spacing = 1.4 bar_style = surround_text lug_style = plate writing_direction = ltr font_name = Pacifico font_with_style = font_size = 12 font_narrow_widen = 0 font_weight = 0 font_outline_width = 0.5...
Topics: thingiverse, customized, stl
