2
2.0
Mar 16, 2021
03/21
by
Austin Brash (Abrash9)
data
eye 2
favorite 0
comment 0
was searching all over for correct holders to accommodate my tools. decided to just go ahead and make some. makes the work station very clean with a spot for everything. this is my first uploaded thingy so any feedback is appreciated! file 1: Flush Cutter Rail Holder (picture 6) file 2: 40g Elmers Glue Stick Rail Holder (picture 3) file 3: Small Elmers glue stick Rail Holder (picture 4) file 4: 20g Gorilla Glue Rail Holder (picture 2) file 5: X-Acto Knife Rail Holder (picture not shown) (sorry...
Topics: ender holder, thingiverse, ender glue, ender bic, ender flush cutter, ender knife, Ender3, ender...
4
4.0
Jun 11, 2021
06/21
by
(benebrady)
data
eye 4
favorite 0
comment 0
Summary I created this tolerance test to find out how well my printers were calibrated. If you can print this and slide the V-Slot back and forth in the channel, then your printer is calibrated very well. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% Filament: Overture PLA Black Notes: Print this standing on it's end. All in one piece.
Topics: creality_ender_3, Ender_3, thingiverse, ender_5, Creality_Ender_5, stl
2
2.0
Jul 3, 2021
07/21
by
(Peterpiper05)
data
eye 2
favorite 0
comment 0
This was a remix of Raspberry Pi 4B Flirc Case Wall Mount by dualznz. I wanted to get my Rasberry Pi out of the way so I could have a little more bench space back and keep the cables from getting tangled(I have a lot of cables near my my printer). I use a Flirc case because I love the idea of the entire case acting as a heatsink and it's great but now there's another thing taking up room. So I decided to look for a mount but there weren't any that would do what I wanted. So I attached a bracket...
Topics: creality_ender_3, ender_5_plus, Ender_3, Ender, ender_5, ender_5_pro, 3D Printer Accessories,...
5
5.0
Mar 18, 2021
03/21
by
Adam Zaremba (Zaremba)
data
eye 5
favorite 0
comment 0
Tool holder version for Ender-5 with scraper. The handle is pushed onto the front frame of the printer. Version with pliers on the left and right side of the frame.
Topics: Creality, Creality Ender-5, Ender, Ender-5, Creality Ender 5, 3D Printer Accessories, tools, Ender...
7
7.0
Jun 11, 2021
06/21
by
(netooweb)
data
eye 7
favorite 0
comment 0
Summary There are a few modification available to address the misalignment of the Ender 3 z axis motor from the leadscrew nut. This version: brings a 4.5 mm misalignment closer to true uses the original screws and includes a gauge for checking the size of the gap. The Ender 3 must be capable of printing obviously to create the model. X, Y and Z axis dimensional accuracy all need to be reasonable to print an accurately fitting part. The model addresses misalignment in the Y direction which is by...
Topics: creality_ender_3, Ender_3, thingiverse, Ender, stl
2
2.0
Jan 6, 2021
01/21
by
Steve Hunter (Steve32060)
data
eye 2
favorite 0
comment 0
Wanted to use my EZR...so I adapted a re-mix
Topics: ender 5, stl, creality_ender_3, ender-5 pro, ender-5 plus, ezrstruder, CR-10, 3D Printer Parts,...
0
0.0
Apr 20, 2022
04/22
by
michael pittman (mikep1903)
data
eye 0
favorite 0
comment 0
Ender 3 Pro side storage tray. holds parts, nozzles or anything you decide to put in it.
Topics: ender 3, thingiverse, ender 3 pro, ender 3 upgrade, ender tray, 3D Printing, ender storage, ender 3...
1
1.0
Dec 1, 2021
12/21
by
nova (SirNovacraft)
data
eye 1
favorite 0
comment 0
upgrade if you only have the stock fan housing, this will be the way to go
Topics: Ender, thingiverse, 3D Printer Accessories, Ender_3, stl, creality_ender_3, ender v2
6
6.0
Jan 20, 2021
01/21
by
Gen Cab (GenCab)
data
eye 6
favorite 0
comment 0
Check out my etsy store. https://www.etsy.com/shop/HotSquare 11/9/2018 Updated Per request: -Base now available in 4 parts to allow printing on Ender 2. -All joint sections reinforced and will require adhesive or cohesive for stability. Superglue or epoxy work well. -Each section has a flat side for build plate but will require supports on all parts. Make sure and add plenty of shells. Recommend 4 perimeters minimum. Works with old and new Ender 2 revisions. Its 4mm wider than the old base....
Topics: Ender_2, creality_ender_2, 3D Printer Accessories, Ender, thingiverse, ender-2, stl
5
5.0
Mar 3, 2021
03/21
by
(Lucky3310)
data
eye 5
favorite 0
comment 0
Print it have fun..........
Topics: filament, Ender, pro, thingiverse, stl, 3D Printing, creality_ender_2, Ender_3, creality_ender_3,...
1
1.0
May 1, 2021
05/21
by
Greg Brubaker (gbru316)
data
eye 1
favorite 0
comment 0
Adds an SD card reader to the original LCD relocate part. Existing solution was 2 seperate parts and was designed for a stock mounted control box. This solution is for rear mounted control boxes.
Topics: stl, Ender, ender_5, Creality_Ender_5, Creality, Creality_Ender_5_Plus, ender_5_plus, 3D Printer...
1
1.0
Apr 19, 2022
04/22
by
Lars Magnus Sommerseth (larzem)
data
eye 1
favorite 0
comment 0
made a holder for hugohuge spool holder that works with the new ender 3 s1
Topics: 3D Printer Parts, ender 3 s1 ender 3, thingiverse, ender 3 s1, ender, ender s1, stl
2
2.0
Mar 31, 2021
03/21
by
Robert Bowling (rebel101)
data
eye 2
favorite 0
comment 0
Correct fitting spool nut for Ender 3 pro and Ender 5. Has the key way instead of threaded like the older version. The Z switch bracket was cracked on my Ender 5 so i recreated it and its a perfect fit. Couldn't find one when searching so just paying it forward. First creations! FTW
Topics: creality_ender_3, ender_5_upgrades, thingiverse, 3D Printer Parts, ender_5, stl, Ender, Ender_3
2
2.0
Apr 4, 2021
04/21
by
Justin Werth (JDubs55303)
data
eye 2
favorite 0
comment 0
This remix is for those who use the Arducam CSI to HDMI Cable Extension Module instead of a ribbon cable to connect their Pi Cam to their Raspberry Pi
Topics: thingiverse, 3D Printer Accessories, Ender-3, creality_ender_3, stl, Creality, creality_ender,...
6
6.0
Jun 11, 2021
06/21
by
(netooweb)
data
eye 6
favorite 0
comment 0
Summary Many modifications have been designed for Ender 3 including a number of anti-snagging modifications to prevent the heater cable catching on the frame extrusion. Until now, I have not had reason to modify my Ender 3. A recent overnight print failed due to severe layer shift most likely cause by the heater cable snagging on the rear of the, left-hand-side, base 40x40 extrusion. The model replaces the stock 40x40 extrusion end cap which is easily removed. The model is inserted into the...
Topics: Creality, creality_ender_3, Ender_3, thingiverse, Ender, stl
5
5.0
Mar 17, 2021
03/21
by
Hampus Andersson (haand001)
data
eye 5
favorite 0
comment 0
Easy to install Z-rod support with filament guide. All you need is a skateboard bearing (size 608). Install guide: - Insert bearing into printed part - Unscrew the top two screws above the z-rod using a 4mm allen wrench - Mount the printed part - Fasten the printed part with the screws using the same allen wrench. For more threads in contact, please remove the washers on the screws.
Topics: Creality, ender_3_filament, Ender, creality_ender_3, Ender_3, ender_3_accessories, Ender_3_Pro, 3D...
6
6.0
Jun 10, 2021
06/21
by
Michael Triffon (Modmike)
data
eye 6
favorite 0
comment 0
Due to a popular uprising I've re-designed the PiCam 2 case to require less critical tolerances and used magic numbers to make it easier to print. Please let me know how it works for you. Please use CHEP's Cura profiles linked below. I no longer use Simplify 3D and have no settings beyond layer height and speed. ### IMPORTANT!!!!!!!!! TEST FIT THE CASE BEFORE INSTALLING THE CAMERA OR YOU MAY BREAK IT. THE COVER SHOULD SLIDE ON WITH SOME RESISTANCE. IF IT IS TOO HARD YOU NEED TO CALIBRATE YOUR...
Topics: ender_3, creality, thingiverse, Ender-3, creality_ender, ender, 3D Printer Accessories, stl
4
4.0
Mar 4, 2021
03/21
by
jesus lopez norte (zorroronoa)
data
eye 4
favorite 0
comment 0
Aqui os dejo un kit de mejoras para la creality ender 3 junto con el vídeo donde os muestro como instalarlas espero que os sirvan este kit es una recopilación de distintas fuentes las cito a continuación: Guia Varilla Eje Z: https://www.thingiverse.com/thing:304... Cubre Railes V-Slot: https://www.thingiverse.com/thing:832077 Cadenas para cables: https://www.thingiverse.com/thing:2920060 Tapa para Perfil 4040: https://www.thingiverse.com/thing:3180189 Marco para LCD:...
Topics: mejoras ender 3, kit upgrades ender 3, mods ender 3, creality ender, 3D Printer Accessories,...
3
3.0
Mar 15, 2021
03/21
by
Andy Finch (Finchers)
data
eye 3
favorite 0
comment 0
I wanted a spool holder for my Ender 3 and 5 that required a minimal amount of supports to print and uses 608 bearings. This design requires 2 bearings and uses the existing locking nut that comes with the ender spool arm. The only part that requires supports is the roller that prints vertically. (part files are already oriented correctly) Fits spool width to 80mm
Topics: 3D Printing, ender_5, thingiverse, enderv2, Ender_3, Ender, creality_ender_3, stl, Ender_3_Pro
5
5.0
Mar 16, 2021
03/21
by
Andreas Maerkl (Bertwerk)
data
eye 5
favorite 0
comment 0
This housing for the Ender 2 I designed for two reasons: 1.) Imho, the original housing is too close to the left bed leveling knob and so I was always struggling to grab it. 2.) For the use of MOSFETs for both heatbed and nozzle additional space was required and simple putting them next to the printer looks quite ugly. The housing consists of several single pieces and all can be printed with the outside of the enclosure on the plain glass surface which makes it look shiny. The walls are quite...
Topics: creality_ender_2_case, Ender 2 Upgrade, Ender_2, creality_ender_2, Ender_2_Ender2, 3D Printer...
4
4.0
Mar 17, 2021
03/21
by
Hampus Andersson (haand001)
data
eye 4
favorite 0
comment 0
This thing is perfect together with this: https://www.thingiverse.com/thing:3353354 or by itself. What you will need is 2 neodym magnets 8mm in diameter and 3mm thick. I will also work with thinner magnets. The 7mm socket used for changing nozzles will neatly snap to the holder, centering it nicely! Don't forget to print it with support.
Topics: Ender, creality_ender_3, Ender_3, ender_3_accessories, creality_ender_3_pro, Ender_3_Pro, 3D...
3
3.0
Apr 2, 2021
04/21
by
MacDerson Louis (macderson)
data
eye 3
favorite 0
comment 0
I needed a version that I could install without having to undo the extrusion, in order to slide the original tool in (https://www.thingiverse.com/thing:4198943). So I created this version that makes use of 2 x M4x8 bolts and 2x M4 T-Nuts. I also removed the micro sd card reader slot. I store that elsewhere so it wasn't needed. Otherwise, everything else is about the same.
Topics: ender_5_plus, creality_ender_3, Creality_Ender_5_Plus, creality_ender_3_pro, Ender_3, thingiverse,...
2
2.0
Jan 9, 2021
01/21
by
Miguel Piedrahita (miguelpie)
data
eye 2
favorite 0
comment 0
This simple tool holder holds the spatula, the cutters, and a stick of Magigoo. To install, simply slide on to the extrusion from the side. Should work well for Ender 3, Ender 3 Pro, and Ender 3 V2. See this similar design for a photo of how it looks when installed, with the tools in place: https://www.thingiverse.com/thing:4596763 Remix of Mechaneg's great tool holder, which is designed for small glue sticks instead of Magigoo.
Topics: thingiverse, Ender, stl, 3D Printer Accessories, Ender_3, ender_3_v2, creality_ender_3, Ender_3_Pro
1
1.0
Jun 10, 2021
06/21
by
Christiaan Lefering (Chrizz)
data
eye 1
favorite 0
comment 0
Creality Ender-3 Series Rotary Encoder Knob Inner Diameter ( 5.95mm ) Enjoy! Website: https://www.e-studios.eu/ Instagram: https://www.instagram.com/es_chrizz/ Twitter: https://twitter.com/es_chrizz
Topics: ender3, creality_ender_3, Creality_Ender_5_Pro, thingiverse, ender5pro, ender_3_v2_pro,...
2
2.0
Jun 22, 2021
06/21
by
Evan Br (eb3d_printing)
data
eye 2
favorite 0
comment 0
Designed some 3D printed Oldham Couplers for my Ender 5 Plus. The ones available didn't match up with the bolt pattern on the 5 Plus' lead screws. Suggest Printing at 100% infill with 0.12 layer height and 4 walls. Uses M3x8mm to attach to brass nut and M3x10/12mm to attach to Z Gantry Bar.
Topics: stl, Ender, ender_5_pro, thingiverse, ender_5, ender_5_upgrades, coupler, ender_5_plus, Creality,...
5
5.0
Mar 4, 2021
03/21
by
Rhys Jones (AlwynxJones)
data
eye 5
favorite 0
comment 0
Simple design created to add lights with a switch to the Creality Ender 3. This can be easily wired into the stock power supply for the Ender 3. I am not an electrician so I am not going to give a wiring tutorial but there are many available on YouTube. Each print has clips to easily attached to the frame of the Ender 3. The prints are designed to be snap fit but may require a dab of super glue to stay secure. Below are a list of items to make this project, although most makers should have a...
Topics: ender_3_upgrade, upgrade, Ender, 3D Printer Accessories, thingiverse, creality_ender_3,...
4
4.0
Mar 8, 2021
03/21
by
Maksim Chucha (Chucha_TV)
data
eye 4
favorite 0
comment 0
Магазин CREALITY ENDER http://ali.pub/323yh5 Магазин ANYCUBIC http://ali.pub/39t8qo Магазин TRONXY http://ali.pub/323yj3 Магазин ZONESTAR http://ali.pub/323z0z Магазин TEVO http://ali.pub/323zgc Магазин ANET http://ali.pub/323zvi Для Синхронизации оси Z 39$ http://ali.pub/3501sk ИЛИ в розницу за 16,30$: Подшипник 688ZZ (10шт) 3,30$ http://ali.pub/35018j Шкив GT2 (20T W6 B8) (3шт) 3,97$...
Topics: Right Mod Ender 3, stl, thingiverse, Ender, Ender 3, creality_ender_2, creality_ender_3, 3D...
3
3.0
Jan 4, 2021
01/21
by
(Harnish_Unlimited)
data
eye 3
favorite 0
comment 0
This is a belt tensioner for the Ender 3-V2, made to match the style of the original factory knob. To install, you will need a metric M4 nut for each tensioner. The nuts will need to fit these dimensions: x_diameter - 6.8 mm y_diameter - 6.8 mm z_height - 3mm
Topics: creality_ender_3_v2, stl, ender_3, Creality_ender_3_mods, 3D Printer Parts, creality_ender_3_pro,...
4
4.0
Mar 4, 2021
03/21
by
Keith Bennett (thisiskeithb)
data
eye 4
favorite 0
comment 0
Similar to the [full bed print](https://www.thingiverse.com/thing:3336550) that arrives on the bed of Tevo Tornado printers, I wanted to create a full bed test print for the Ender-3/5. Print with zero top & bottom layers, three perimeters, and whatever infill pattern & infill percent you want. The example in the screenshot was done with 20% grid infill. This will work on the Ender-3/5 (220x220mm) & Ender-2 (150x150mm) or other printers with similar bed sizes.
Topics: Ender-5, stl, Ender_5, Ender_3, Ender-2, Ender_2, Creality, 3D Printing Tests, Ender-3,...
1
1.0
Aug 22, 2021
08/21
by
Peter Ashmore (Petea4)
data
eye 1
favorite 0
comment 0
https://www.youtube.com/watch?v=URPJkxQfjqM Endoscope I used https://smile.amazon.co.uk/gp/product/B07YKNLC7R/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Topics: Hobby, Ender_3_Pro, creality_ender_3, endoscope, endoscope_mount, 7mm endoscope, ENDER, stl,...
1
1.0
Jan 8, 2021
01/21
by
Michal Kacper (mknet)
data
eye 1
favorite 0
comment 0
Replacement for stock parts that's cause lack parallelism of lead screw mechanism relative to frame , and z wobble effect in result. Also compatible with frame vslots that help to make fixed lead screw / frame geometry. Use with stock screw, and add 2pcs of M3x6 to motor screw in.
Topics: stl, creality_ender_3, 3D Printer Parts, Ender_3, ender, thingiverse, ender 3 v2, Ender_3_Pro
5
5.0
Mar 16, 2021
03/21
by
Claude Theroux (ctheroux)
data
eye 5
favorite 0
comment 0
Put this spacer between the X-Axis and the Z end-stop. It is useful when adding a 3 mm glass on the bed of an Ender-2 or Ender-3 3D printer. It is a lot easier to use this spacer than to move the Z end-stop up. A drop of hot glue is used to maintain it in place. Support is not required. This object main web page is: http://www.ctheroux.com/ender-z-end-stop-spacer/. You can request the source files on the page listed above.
Topics: Creality, Ender_2, Ender, creality_ender_2, creality_ender_3, Ender_3, 3D Printer Parts, stl,...
3
3.0
May 1, 2021
05/21
by
Daniel Dhein (Balckfutur)
data
eye 3
favorite 0
comment 0
You need -two M3x20 cylinder head screws to fasten the sensor to the bracket.
Topics: stl, Ender, ender_5, Creality, Ender_3, ender_5_plus, 3D Printer Parts, thingiverse, ender_5_pro
4
4.0
Mar 3, 2021
03/21
by
Martin Laža (curly_cz)
data
eye 4
favorite 0
comment 0
A dummy part for everyone who wants to create anything on Z axis on Creality machines
Topics: 3D Printer Parts, Ender, CR10, thingiverse, stl, creality_ender_2, Ender_3, creality_ender_3,...
2
2.0
Mar 15, 2021
03/21
by
John Rice (Browndilocks)
data
eye 2
favorite 0
comment 0
Caliper holder for any Ender machine! The mount should fit any device that uses those standard horizontal Crealty frames. I wanted a good place to store my caliper, and this seemed as good as any! Even made a little slot for that spare battery it comes with. Fits like a glove. My caliper is the Carrera Precision 12 in. Jaw Width Electronic Fractional Digital Caliper Micrometer. I'd suggest scaling to fit your caliper before printing, rather than use this one off the shelf - as it's a...
Topics: ender_5, thingiverse, Ender_3, Ender, stl, 3D Printer Accessories
1
1.0
Jan 18, 2022
01/22
by
Jim Small (jimsmall)
data
eye 1
favorite 0
comment 0
This case fits the Kuman 7 inch Raspberry Pi touch screen. It has holes on the top, bottom, and back to allow for mounting various mounting positions in the v-grove rails using t-nuts. The front cover snaps onto the base.
Topics: Ender, thingiverse, Ender_3, stl, ender_5, 3D Printer Accessories
1
1.0
Apr 19, 2022
04/22
by
Adam Buckley (Adam20J)
data
eye 1
favorite 0
comment 0
After purchasing an Ender 6 Offical Cover I noticed that the cover was slightly misaligned and wider than the printer, this caused the cover to fall off / drop during printing. The retainer rails simply use the existing bolt holes and screws that come with the Ender 6 to attach and solves the issues I had.
Topics: Ender, thingiverse, Ender-6, Ender_6_Cover, 3D Printer Accessories, Creality_Ender_6, Ender 6, stl,...
2
2.0
Apr 2, 2021
04/21
by
MacDerson Louis (macderson)
data
eye 2
favorite 0
comment 0
This version extends the arm back to keep the black cable cover from touching any parts of the y-axis motor, and rods. It also adds support for the Bowden tube. inspired by thing: thing:3872380 Inspired by: https://www.thingiverse.com/thing:3872380
Topics: ender_5_plus, Creality_Ender_5_Plus, ender_5_upgrades, thingiverse, 3D Printers, ender_5_pro,...
2
2.0
Apr 3, 2021
04/21
by
Marc Monlouis (Sh0dan)
data
eye 2
favorite 0
comment 0
Hi If you think that ender 5's visible endstop switchs looks like unfinished you can easilly remedy with that simple cover. Installation takes about 5 mn: ### Print Settings Resolution: 0.2 Infill: 20% or more no support, build plate adhesion printing time : About 20 mn per cover. ### What you need ? - 6 x M3x16mm countersunk head screws =>...
Topics: thingiverse, Creality_Ender_5, ender_5_pro, 3D Printer Accessories, Creality_Ender_5_Plus, ender_5,...
1
1.0
May 1, 2021
05/21
by
Chris D (Hemi345)
data
eye 1
favorite 0
comment 0
I have a plastic dust cover that I throw over my Ender 3 when it's not in use. I'm usually careful when putting it on and taking it off that I don't snag the Z screw and accidently bend it. Since my family is using the printer more these days, I designed this thing to just protect the Z screw but leave it free to move (the Z screw is not 100% true/straight... holding it captive with a bearing or something will result in artifacts in your prints).
Topics: stl, Ender, Ender_3_Pro, creality_ender_3, Ender_3, 3D Printer Parts, thingiverse
1
1.0
Apr 28, 2021
04/21
by
Creality3d Official (creality3dprint)
data
eye 1
favorite 0
comment 0
Use Ender 3 Pro print an Ender 3 Pro, you can choose a different color to every part, come on guys create your own Mini Ender 3 Pro!
Topics: Ender_3, thingiverse, 3D Printers, Ender_3_Pro, Ender3, Ender, creality_ender_3, stl
1
1.0
Dec 1, 2021
12/21
by
Geymann Jean-Philippe (JypG)
data
eye 1
favorite 0
comment 0
Entretoise pour régler le parallélisme de l'axe X sur une Ender 3
Topics: Ender, thingiverse, 3D Printer Accessories, Ender_3_Pro, Ender_3, stl, creality_ender_3
2
2.0
Apr 4, 2021
04/21
by
Joshua McCann (NurseFarva)
data
eye 2
favorite 0
comment 0
I designed this small holder to store my ruler in the rails of my Ender 5 Pro.
Topics: thingiverse, ender accessories, ender upgrades, 3D Printer Accessories, ruler, Classic Ruler, stl,...
2
2.0
Jan 5, 2021
01/21
by
chimera NZL (chimeranzl)
data
eye 2
favorite 0
comment 0
Yet another tool holder! This one I designed to hold the scraper that comes with Creality Ender 5 3D printers. It's perhaps the most commonly used of the tools. Many designs are thin slots that are slightly painful to slide the scraper back into, I wanted something that was quick to retrieve and quick to hang back again. Push fit onto Ender 5 extrusion. It will be a tight fit (to stop it sliding down the extrusion) If you like it, click Like! If you make it, post your Make! If you have a...
Topics: stl, ender_5, Ender_tools_holder, ender_tool, Ender_3, ender, thingiverse, Creality, 3D Printer...
5
5.0
Jan 3, 2021
01/21
by
Gillen Howarth (Hazardous3D)
data
eye 5
favorite 0
comment 0
A snazzy looking cap for the end of the Ender 3 gantry rail. Replace original M4*8 screws to M4*12 screws. Covers the Big bolt. Please post your makes so I can see the cool printer setups! :D If I need to fix something, Let me know! :) Spent 3 days & 14 test prints to get it right for everyone. ENJOY!
Topics: ender 3 x, ender 3 z axis, ender 3 x cap, 3D Printer Accessories, stl, ender x axis, ender 3, ender...
2
2.0
Oct 15, 2021
10/21
by
Tom Ast (Jokerist54)
data
eye 2
favorite 0
comment 0
Its Just A Design For The Ender 5 / 5 plus with better air sealing. There is a loose fit ohne and a thight fit one. I would recomment to Print the tight fit one First and if it’s too tight Print the other one. U should print with support to my mind.
Topics: thingiverse, Satsana, Satsana Ender 5 +, stl, ender satsana, Ender 5 plus, plus, Satsana ender 5...
3
3.0
Apr 20, 2021
04/21
by
Tyler Durden (knoxieman)
data
eye 3
favorite 0
comment 0
Having moved my reel to the side of the machine I wasn't quite getting the path in to the extruder that I liked so I designed a slide on extension reel that simply slides over the existing reel and pushes flush to the end of the bracket, this gives the reel about 40mm more lateral movement towards the front which really helps filament alignment, the finishing touch being the push fit logo emblazoned end cap. This can be fitted regardless of the position of the reel unless you have some very...
Topics: thingiverse, 3D Printer Parts, stl, ender 3 pro filament, ender 3 reel, ender 3 pro spool, ender 3,...
3
3.0
Jan 5, 2021
01/21
by
Alan Cramer (nextux)
data
eye 3
favorite 0
comment 0
After moving my Ender 3 Pro power supply to the rear of the machine, I needed to elevate the machine a little to be able to ensure there is enough clearance to give better airflow to the fan. Took inspiration from the model MoJee3D made, but I do not have any Nerf Rival Balls. Ended up purchasing rubber feet from Jaycar and used 4 small squares in one piece and then stuck it onto the bottom of the print. https://www.jaycar.com.au/rubber-feet-small-stick-on-pack-of-4/p/HP0815 Tab is then screwed...
Topics: stl, creality_ender_3, 3D Printer Parts, Ender, Ender_3, creality_ender_3_pro, thingiverse,...
2
2.0
Mar 16, 2021
03/21
by
William Armstrong (Arm2strong)
data
eye 2
favorite 0
comment 0
Voici un support pour webcam ou caméra légère, du style gopro, qui se fixe à l'avant d'une imprimante Creality Ender 3 V2. Le support se fixe à l'aide des deux troues filetés, à l'extrémité de l'extrusion 40x40, utilisé pour l'ajusteur de tension de la courroie du plateau. Les deux vis doivent être changé pour des vis de quelques millimètres plus longues. Le support s'imprime facilement sur le côté. Here is a camera mount for webcam or gopro style lightweight camera that attaches...
Topics: camera_mount, thingiverse, Ender_3, Ender, creality_ender_3, stl, ender_3_v2, Ender_3_Pro, 3D...
1
1.0
Dec 14, 2021
12/21
by
Ajay Ohri (DirectTechYT)
data
eye 1
favorite 0
comment 0
This is an accessory for the ender 3 v2. It fits right over the belt tensioner bar and dispalys the ender logo. Tried to find one of these, but couldn't so I just made one. Hopefully it will make it easier for you. I have included 2 designs, one with the ender logo cut out, and one with the ender logo engraved, although the dimensioning for the engraved one may need to be adjusted. lmk if you have any trouble with the files. also, sub to my yt channel...
Topics: end cap, ender, Ender 3 logo, ender accessories, creality logo, ender logo, stl, thingiverse, 3D...
