7
7.0
Jan 19, 2021
01/21
by
Jason Brumbelow (jbrum360)
data
eye 7
favorite 0
comment 0
Jewelry tree with the canopy as a dish. 8 sets of limbs were printed. There is an inset on the bottom of the canopy, depending on printer you may want to use support for that area but its minimal. The canopy was glued to the trunk. The limbs had a tight fit, glue if needed.
Topics: jewelry_tree, jewelry_stand, thingiverse, jewelry_holder, Jewelry, jewelry, stl, jewelry_display
3
3.0
Jun 11, 2021
06/21
by
Florian Leon (florianleon)
data
eye 3
favorite 0
comment 0
This is a jewelry stand/holder made to hold and show rings, necklaces, earrings and bracelets. It comes in 5 different parts: - A bottom support made for the rings - A support for the bracelet rod that need to be strong - A bracelet rod to hold the bracelet - A necklace holder that holds both necklaces and earrings (support and brim are recommended for this piece) - A hook (you need 8 pieces) to hold the necklaces --- Depending of the printer you might need to cut the edges of the holes a...
Topics: jewelry_holder, jewelry_box, holder, stl, Jewelry, thingiverse, jewelry_display, Jewelery,...
132
132
Oct 13, 2020
10/20
by
Frégnac, Claude
texts
eye 132
favorite 14
comment 0
97 pages 22 cm
Topics: Jewelry -- History, Jewelry
4
4.0
Apr 4, 2021
04/21
by
Matthew Miller (Minty245)
data
eye 4
favorite 0
comment 0
Jewelry Display Stand I designed in Fusion 360.
Topics: thingiverse, jewelry_display, Jewelry, jewelry_stand, stl, jewelry
10
10.0
Jan 5, 2021
01/21
by
Paul Massey (Paulcmassey)
data
eye 10
favorite 0
comment 0
I loved the design of this box. The contrast in color, and the design of the roses. It was, still, just a box though. So, I did a little cutting, building and scaling in Blender and VOILA! DRAWERS! So now there are 4 pivot drawers, two for rings, two for other things and a space on top for even MORE things! I haven't printed it yet, so I'm not sure about settings, but the drawers should snap in without too much difficulty. Let me know in the comments if you try and any issues you had so I can...
Topics: jewelry_box, stl, thingiverse, Jewelry, jewelry
3
3.0
Apr 27, 2021
04/21
by
Progress TH (ProgressTH)
data
eye 3
favorite 0
comment 0
A jewelry box with an acrylic windowed display on top, 2 drawers below, and a concrete-filled base to give the entire box more weight to keep it from moving when opening and closing drawers. This is another project that is a bit difficult to print and assemble because it was a one-off gift. But I'm still offering the STL files and SketchUp file for anyone willing to give it a try on their own. Check the SketchUp file especially because it will show all the parts and how they fit together if you...
Topics: jewelry_box, thingiverse, Jewelry, jewelry, stl
20
20
texts
eye 20
favorite 3
comment 0
160 pages : 29 cm
Topics: Jewelry -- History, Jewelry
Title varies: Sept. 1879- Trader; -June 1958, The Trader and Canadian jeweller
Topics: Jewelry, Jewelry trade
6
6.0
Mar 8, 2021
03/21
by
Rebel Rae (RebelRae)
data
eye 6
favorite 0
comment 0
This basic box is 110mm x 55 mm designed to fit customers nipple clamps for studio display **note:** The outer box should be printed vertically (lengthwise) and inner box printed flat, both with no supports
Topics: jewelry, Jewelry, stl, thingiverse, jewelry_box
97
97
Jan 14, 2021
01/21
by
Mastai, Marie-Louise d'Otrange
texts
eye 97
favorite 14
comment 0
128 pages : 29 cm
Topics: Jewelry -- History, Jewelry
Title varies: Sept. 1879- Trader; -June 1958, The Trader and Canadian jeweller
( 1 reviews )
Topics: Jewelry, Jewelry trade
84
84
texts
eye 84
favorite 12
comment 0
160 pages : 29 cm
Topics: Jewelry -- History, Jewelry
Title varies: Sept. 1879- Trader; -June 1958, The Trader and Canadian jeweller
Topics: Jewelry, Jewelry trade
31
31
Sep 26, 2020
09/20
by
Alden, Nancy
texts
eye 31
favorite 3
comment 0
143 p. : 28 cm
Topics: Jewelry making, Gold jewelry, Silver jewelry
199
199
Dec 27, 2019
12/19
by
Krupenia, Deborah
texts
eye 199
favorite 13
comment 0
144 pages : 25 cm
Topics: Jewelry making, Jewelry -- Design, Jewelers, Jewelry
5
5.0
Mar 31, 2021
03/21
by
Sanyi Danka (Azzazel0723)
data
eye 5
favorite 0
comment 0
As it as a box for jewelry, it can be a nice gift for your girlfriend or your mom. I suggest to print the "Top Cover" at a standing position (at low speeds) as it has small details - also put a raft below it to have enough build plate adhesion. The "Base" can be printed upside down - it is optional. You can calculate the amount of support needed in both position. The "Leg" and the "Buttons" are small so don't print them 1 by 1. As i drawed the model with...
Topics: jewelry, thingiverse, jewelry_box, Jewelry, stl
6
6.0
Jan 18, 2021
01/21
by
jui more (juimore)
data
eye 6
favorite 0
comment 0
This model is use for store small items like pins,earring,rings etc..
Topics: thingiverse, jewelry_holder, Jewelry, flower_box, jewelry_box, jewelry, stl
Title varies: Sept. 1879- Trader; -June 1958, The Trader and Canadian jeweller
Topics: Jewelry, Jewelry trade
Title varies: Sept. 1879- Trader; -June 1958, The Trader and Canadian jeweller
Topics: Jewelry, Jewelry trade
90
90
Sep 5, 2018
09/18
by
Willcox, Donald J., 1933-
texts
eye 90
favorite 4
comment 0
xiv, 226 p. 29 cm
Topics: Jewelry making, Jewelry
250
250
Feb 27, 2012
02/12
by
Baker, Lillian
texts
eye 250
favorite 27
comment 0
Includes index
Topics: Jewelry, Costume jewelry
31
31
texts
eye 31
favorite 5
comment 0
144 pages : 32 cm
Topics: Jewelry -- History, Jewelry
2
2.0
Dec 1, 2021
12/21
by
Nick Naton (ah1102)
data
eye 2
favorite 0
comment 0
Modular jewelry holder.
Topics: stand, holder, thingiverse, jewelry_stand, stl, jewelry, Jewelry, jewelry_holder
5
5.0
Oct 14, 2021
10/21
by
(tnever)
data
eye 5
favorite 0
comment 0
This is a new "jumping dolphins" jewelry holder based upon my original owl jewelry tree from over 7 years ago. Back then I made other remixes for hearts and butterflies. The basic design has been popular as a gift for friends and family for many years. There are a number of holes and open segments that can be used to attach earrings and other small jewelry items. My print quality is much better 7 years later than when I made these jewel my original Printrbot. The included jumping...
Topics: jewelry_holder, jewelry_tree, thingiverse, dolphin, stl, Jewelry, jewelry
27
27
Mar 15, 2022
03/22
by
Rathbone, R. LL. B.
texts
eye 27
favorite 1
comment 0
Topics: Jewelry making, Jewelry
65
65
Jan 15, 2020
01/20
by
Pemberton, Max, 1863-1950
texts
eye 65
favorite 3
comment 0
vii, 269 pages : 22 cm
Topics: Jewelry -- Fiction, Jewelry
11
11
Feb 3, 2022
02/22
by
Lanllier, Jean
texts
eye 11
favorite 3
comment 0
327 pages : 28 cm
Topics: Jewelry -- History, Jewelry
3
3.0
Apr 8, 2021
04/21
by
Kevin McDermott (Caputsic)
data
eye 3
favorite 0
comment 0
This is a jewelry hook with 10 small hooks, two large hooks, and a box. It is meant to be hung using three 3M strips. This print is 254 mm (10 inches)wide by 98 mm (3.8 inches) tall. I printed this at 100% infill to ensure the large hooks and box are sturdy enough for everyday use. I have included the Sketchup file so further edits can be made.
Topics: stl, thingiverse, Jewelry, jewelry, jewelry_display
328
328
Nov 2, 2010
11/10
by
Tythacott, Louise
texts
eye 328
favorite 24
comment 0
Includes bibliographical references (p. 47) and index
Topics: Jewelry making, Ethnic jewelry, Jewelry, Handicraft
Source: removedNEL
5
5.0
Apr 20, 2021
04/21
by
justin paresky (jjp12383)
data
eye 5
favorite 0
comment 0
This is a pine cone pendant made for an anniversary gift. Available with or without a chain ring, in case you want to try coming up with your own attachment method.
Topics: jewelry, thingiverse, Jewelry, stl
2
2.0
Mar 25, 2021
03/21
by
Ali UYGUR (aliscooper)
data
eye 2
favorite 0
comment 0
This is one of my first 3D design experiments. Just a study done
Topics: stl, jewelry, Jewelry, thingiverse
4
4.0
Aug 8, 2021
08/21
by
Itamar Goshen (Itamar_Goshen)
data
eye 4
favorite 0
comment 0
jewelry box
Topics: thingiverse, Jewelry, jewelry_box, jewelry, stl, box
1
1.0
Jul 22, 2021
07/21
by
Toni Lara (tonilara)
data
eye 1
favorite 0
comment 0
Allows you to store your jewelry and other small items in style. Required material: printed parts x2. Using PLA as a printing material, the strength of the product is enough to fulfill its function.
Topics: jewelry_holder, stl, Jewelry, jewelry_box, thingiverse
22
22
Jul 14, 2020
07/20
by
Doney, Meryl, 1942-
texts
eye 22
favorite 6
comment 0
32 pages : 27 cm
Topics: Jewelry -- Juvenile literature, Jewelry making -- Juvenile literature, Jewelry, Jewelry making
13
13
Nov 3, 2021
11/21
by
Saunders, Chantal Lise
texts
eye 13
favorite 4
comment 1
111 p. : 27 cm
favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topics: Jewelry making, Chains (Jewelry), Silver jewelry -- Technique
64
64
Dec 6, 2019
12/19
by
Bond, Christopher (Jeweller), author
texts
eye 64
favorite 7
comment 0
144 pages : 25 cm
Topics: Jewelry making, Plastic jewelry
703
703
Jun 15, 2019
06/19
by
Olver, Elizabeth
texts
eye 703
favorite 24
comment 0
160 pages : 23 cm
Topics: Jewelry -- Design, Jewelry making
12
12
Oct 9, 2021
10/21
by
Hanna, Amy
texts
eye 12
favorite 5
comment 0
127 pages : 26 cm
Topics: Jewelry making, Costume jewelry
3
3.0
Mar 20, 2021
03/21
by
David Bunch (GeoDave)
data
eye 3
favorite 0
comment 0
This a necklace stand I designed to hold 16 necklaces. I wanted to make it a little more interesting to look at, so I added the spider web design at the top. I used a 11.5" long 3/8" oak dowel for the support, but you can print a plastic dowel if you prefer from the included file. The widest part is slightly less than 200mm. I also included a test part so you can check whether the hole prints the correct size on your printer. I still had to sand the dowel a little so it had a nice...
Topics: Jewelry, thingiverse, stl, jewelry
4
4.0
Jun 11, 2021
06/21
by
Fadıl Tuğal Kain (Tubal_Cain)
data
eye 4
favorite 0
comment 0
At the first, I started to create a simple ring holder design for only organizing my little ring collection. After I started, I made a complicated design than I think before. I measured all my ring sizes and tried to create universal sizes for most of steel men rings. And I designed a strong frame form.
Topics: jewelry_holder, holder, ring_holder, stl, Jewelry, thingiverse, jewelry_display, ring,...
3
3.0
Apr 12, 2021
04/21
by
(tnever)
data
eye 3
favorite 0
comment 0
This is a version of the jewelry tree holder that has a desktop stand, as opposed to the earlier version that was primarily a wall mount stand. I have ended up making a few of these for friends and they are pretty popular. This desktop stand prints in less than hour instead of the multiple hours that the wall mount version did.
Topics: thingiverse, stl, butterfly, tree_jewelry_holder, Jewelry, jewelry_tree, owls, jewelry_holder,...
4
4.0
Mar 18, 2021
03/21
by
Jason Garza (DragonSlayer32)
data
eye 4
favorite 0
comment 0
It comes in 5 parts the 2 ends the 2 sides and the top and bottom. The bottom fits perfectly inside the ends and sides.
Topics: Jewelry, thingiverse, stl, jewelry_holder, jewelry_box
2
2.0
Jan 19, 2022
01/22
by
Pedro Canovas Martos (knovazz)
data
eye 2
favorite 0
comment 0
Joyero fácil de imprimir. Solo necesario pegar el colgador en la base con pegamento caliente o tipo superglue.
Topics: Jewelry, thingiverse, joyero, jewellery, jewelry_box, jewelry_holder, joyas, stl, jewelry
2 ., ix-xv, 50 p. 27 cm
Topics: Jewelry, Fibulas (Jewelry), Brooches
2
2.0
Mar 31, 2021
03/21
by
Edward Ott (edwardott)
data
eye 2
favorite 0
comment 0
made with tinkercad
Topics: Jewelry, stl, jewelry, thingiverse
93
93
Dec 19, 2019
12/19
by
Cable, Melissa, 1970-
texts
eye 93
favorite 7
comment 0
111 pages : 28 cm
Topics: Jewelry making, Wire jewelry
22
22
Feb 3, 2021
02/21
by
LeVart, Shannon
texts
eye 22
favorite 1
comment 0
1 volume : 23 cm
Topics: Jewelry making, Costume jewelry
228
228
Apr 30, 2010
04/10
by
Ziek, Nona
texts
eye 228
favorite 18
comment 0
Bibliography: p. 237
Topics: Silver jewelry, Jewelry making
6
6.0
Jan 16, 2021
01/21
by
Siddh Mehndiratta (SMisCool)
data
eye 6
favorite 0
comment 0
A print made for mothers day.
Topics: jewelry, Jewelry, thingiverse, stl
3
3.0
Apr 12, 2021
04/21
by
S Hendriks (shendriks)
data
eye 3
favorite 0
comment 0
Custom MY iMenso insert
Topics: thingiverse, stl, Jewelry, jewelry
