Hardware development of the Shuttle Entry Data System (SEADS) is described. The system consists of an array of fourteen pressure ports, installed in an Orbiter nose cap, which, when coupled with existing fuselage mounted static pressure ports permits computation of entry flight parameters. Elements of the system that are described include the following: (1) penetration assemblies to place pressure port openings at the surface of the nose cap; (2) pressure tubes to transmit the surface pressure...
Topics: NASA Technical Reports Server (NTRS), AIR DATA SYSTEMS, ATMOSPHERIC ENTRY, DESIGN ANALYSIS, NOSE...
The LAGEOS was extensively tested optically prior to launch. The measurement techniques used are described and resulting data is presented. Principal emphasis was placed on pulse spreading characteristics, range correction for center of mass tracking, and pulse distortion due to coherent effects. A mode-locked freqeuncy doubled Nd:YAG laser with a pulse width of about 60 ps was used as the ranging transmitter and a crossfield photo-multiplier was used in the receiver. High speed sampling...
Topics: NASA Technical Reports Server (NTRS), LAGEOS (SATELLITE), LASER RANGE FINDERS, PRELAUNCH TESTS,...
This report presents the results of the Aerospace Safety Advisory Panel (ASAP) activities during 2002. The format of the report has been modified to capture a long-term perspective. Section II is new and highlights the Panel's view of NASA's safety progress during the year. Section III contains the pivotal safety issues facing NASA in the coming year. Section IV includes the program area findings and recommendations. The Panel has been asked by the Administrator to perform several special...
Topics: NASA Technical Reports Server (NTRS), AEROSPACE SAFETY, NASA SPACE PROGRAMS, SPACE TRANSPORTATION...
This slide presentation reviews the testing approach that NASA is developing for the Ares I launch vehicle. NASA is planning a complete series of development, qualification and verification tests. These include: (1) Upper stage engine sea-level and altitude testing (2) First stage development and qualification motors (3) Upper stage structural and thermal development and qualification test articles (4) Main Propulsion Test Article (MPTA) (5) Upper stage green run testing (6) Integrated Vehicle...
Topics: NASA Technical Reports Server (NTRS), ARES 1 LAUNCH VEHICLE, GROUND TESTS, PERFORMANCE TESTS,...
The conventional control and monitor software currently used by the Space Center for Space Shuttle processing has many limitations such as high maintenance costs, limited diagnostic capabilities and simulation support. These limitations have caused the development of a knowledge based (or model based) shell to generically control and monitor electro-mechanical systems. The knowledge base describes the system's structure and function and is used by a software shell to do real time constraints...
Topics: NASA Technical Reports Server (NTRS), CHECKOUT, COMPUTER PROGRAMS, CONTROL EQUIPMENT, EXPERT...
The development of the Apollo f launch facilities and launch operations is described from the beginning of design through the final launch. Management techniques, innovation in automation, and testing on the ground to avoid failures in space are among the topics covered. The impact of the Apollo program on the citrus groves and quiet beaches of Florida's east coast is included.
Topics: NASA Technical Reports Server (NTRS), APOLLO PROJECT, CAPE KENNEDY LAUNCH COMPLEX, PRELAUNCH TESTS,...
Portions of the LANDSAT-D systems operation plan are presented. An overview of the data processing operations, logistics and other operations support, prelaunch and post-launch activities, thematic mapper operations during the scrounge period, and LANDSAT-D performance evaluation is given.
Topics: NASA Technical Reports Server (NTRS), DATA PROCESSING, LANDSAT 4, MISSION PLANNING, PROJECT...
Space Station Freedom's (SSF's) electric power system (EPS) hardware and software verification is performed at all levels of integration, from components to assembly and system level tests. Careful planning is essential to ensure the EPS is tested properly on the ground prior to launch. The results of the test performed on breadboard model hardware and analyses completed to date have been evaluated and used to plan for design qualification and flight acceptance test phases. These results and...
Topics: NASA Technical Reports Server (NTRS), POWER SUPPLY CIRCUITS, PRELAUNCH TESTS, PROGRAM VERIFICATION...
A patent disclosure document discusses a photonic method for connecting a spacecraft with a launch vehicle upper-stage telemetry system as a means for monitoring a spacecraft fs health and status during and right after separation and deployment. This method also provides an efficient opto-coupled capability for prelaunch built-in-test (BIT) on the ground to enable more efficient and timely integration, preflight checkout, and a means to obviate any local EMI (electromagnetic interference)...
Topics: NASA Technical Reports Server (NTRS), SPACECRAFT TRACKING, TELEMETRY, RADIO FREQUENCIES,...
Shuttle navigation which is the determination of Orbiter position, velocity, and attitude and associated effort, together with guidance, flight control, consumables, and systems management, is required for classical navigation. Position and velocity propagation requires the measurement or modeling of the gravitational, aerodynamic, and rocket engine forces acting on the vehicle. Position and velocity determination is performed or observations of the distance to external features, the rate of...
Topics: NASA Technical Reports Server (NTRS), CRATERS, NAVIGATION, ORBITAL POSITION ESTIMATION, SPACE...
Hardware development of the Shuttle Entry Air Data System (SEADS) is described. The system consists of an array of fourteen pressure ports, installed in an Orbiter nose cap, which, when coupled with existing fuselage mounted static pressure ports permits computation of entry flight parameters. Elements of the system that are described include the following: (1) penetration assemblies to place pressure port openings at the surface of the nose cap; (2) pressure tubes to transmit the surface...
Topics: NASA Technical Reports Server (NTRS), AIR DATA SYSTEMS, ATMOSPHERIC ENTRY, DESIGN ANALYSIS, NOSE...
The simulated zero-gravity ground testing of the flexible fold-up solar array consisting of eighty-four full-size panels (.368 m x .4 m each) is addressed. Automatic, hands-off extension, retraction, and lockup operations are included. Three methods of ground testing were investigated: (1) vertical testing; (2) horizontal testing, using an overhead water trough to support the panels; and (3) horizontal testing, using an overhead track in conjunction with a counterweight system to support the...
Topics: NASA Technical Reports Server (NTRS), DEPLOYMENT, FOLDING STRUCTURES, POSITIONING DEVICES...
This document is the viewgraphs from a presentation concerning the development of the Health Management system for the Space Shuttle Main Engine (SSME). It reviews the historical background of the SSME Advanced Health Management effort through the present final Health management configuration. The document includes reviews of three subsystems to the Advanced Health Management System: (1) the Real-Time Vibration Monitor System, (2) the Linear Engine Model, and (3) the Optical Plume Anomaly...
Topics: NASA Technical Reports Server (NTRS), REAL TIME OPERATION, INFORMATION SYSTEMS, SPACECRAFT...
This cooperative agreement has investigated a number of spectroscopic problems of interest to the Halogen Occultation Experiment (HALOE). The types of studies performed are in two parts, namely, those that involve the testing and characterization of correlation spectrometers and those that provide basic molecular spectroscopic information. In addition, some solar studies were performed with the calibration data returned by HALOE from orbit. In order to accomplish this a software package was...
Topics: NASA Technical Reports Server (NTRS), HALOGEN OCCULTATION EXPERIMENT, SPECTROMETERS, CALIBRATING,...
This paper presents a brief report on the application of Radial Basis Function Neural Networks (RBFNN) to the prediction of sensor values for fault detection and diagnosis of the Space Shuttle's Main Engines (SSME). The location of the Radial Basis Function (RBF) node centers was determined with a K-means clustering algorithm. A neighborhood operation about these center points was used to determine the variances of the individual processing notes.
Topics: NASA Technical Reports Server (NTRS), ALGORITHMS, CLUSTER ANALYSIS, DATA PROCESSING, DIAGNOSIS,...
The Engineering Test Satellite-VI (ETS-VI) is being developed as the third Japanese three-axis stabilized engineering test satellite to establish the 2-ton geostationary operational satellite bus system and to demonstrate the high performance satellite communication technology for future operational satellites. The satellite is expected to be stationed at 154 deg east latitude. It will be launched from the Tanegashima Space Center in Japan by a type H-II launch vehicle. The Deep Space Network...
Topics: NASA Technical Reports Server (NTRS), DEEP SPACE NETWORK, DOWNLINKING, GROUND SUPPORT SYSTEMS,...
A high frame rate digital video camera installed on test stands at Stennis Space Center has been used to capture images of Space Shuttle main engine plumes during test. These plume images are processed in real time to detect and differentiate anomalous plume events occurring during a time interval on the order of 5 msec. Such speed yields near instantaneous availability of information concerning the state of the hardware. This information can be monitored by the test conductor or by other...
Topics: NASA Technical Reports Server (NTRS), PLUMES, HIGH SPEED PHOTOGRAPHY, ENGINE MONITORING...
Determination of the readiness of a spacecraft for launch is a critical requirement. The final assembly of all subsystems must be verified. Testing of a communications system can mostly be done using closed-circuits (cabling to/from test ports), but the final connections to the antenna require radiation tests. The Tropical Rainfall Measuring Mission (TRMM) Project used a readily available 'near-fleld on-axis' equation to predict the values to be used for comparison with those obtained in a test...
Topics: NASA Technical Reports Server (NTRS), LAUNCHING BASES, NEAR FIELDS, SPACECRAFT COMMUNICATION,...
The prelaunch tests for the Space Transportation System 1 flight are briefly described. Testing is divided into two major sections: the wet countdown demonstration test/flight readiness firing, which includes a 20 second test firing of the orbiter's three main engines, and a mission verification test, which is centered on flight and landing operations. The functions of the countdown sequence are listed and end of mission and mission abort exercises are described.
Topics: NASA Technical Reports Server (NTRS), COUNTDOWN, ENGINE TESTS, PRELAUNCH TESTS, SPACE...
The Hubble Space Telescope (HST) Space Telescope Imaging Spectrograph (STIS) was deployed on-orbit in February 1997. The contamination program for STIS was stringently controlled as the five-year end-of-life deposition was set at 158, per optical element. Contamination was controlled through materials selection, extensive vacuum outgassing certifications, cleaning techniques, and environmental controls. In addition to ground contamination controls, on-orbit contamination controls were...
Topics: NASA Technical Reports Server (NTRS), CONTAMINATION, ENVIRONMENTAL CONTROL, HUBBLE SPACE TELESCOPE,...
The pre-launch functioning data of the Field Joint Protection System (JPS) used on QM-8 are presented. Also included is the post fire condition of the JPS components following the test firing of the motor. The JPS components are: field joint heaters; field joint sensors; field joint moisture seal; moisture seal kevlar retaining straps; field joint external extruded cork insulation; vent valve; power cables; and igniter heater.
Topics: NASA Technical Reports Server (NTRS), JOINTS (JUNCTIONS), PRELAUNCH TESTS, RELIABILITY ANALYSIS,...
Tasks required during the post launch period are briefly as follows: attend Project Science Group meetings; support in-flight checkouts; maintain and keep safe the spare instrument and ground support equipment (GSE); organize and maintain documentation; finish calibration measurements, documentation, and analysis; characterize and diagnose instrument anomalies; develop descent data analysis tools; and science data analysis and publication. This report provides background information on the net...
Topics: NASA Technical Reports Server (NTRS), GALILEO SPACECRAFT, GROUND SUPPORT EQUIPMENT, RADIANT FLUX...
A large-scale liquid helium (LHe) to high-pressure (HP) gas conversion system has been implemented at the John F. Kennedy Space Center (KSC). Helium is used by the Space Shuttle, Titan, Atlas, and Delta programs for prelaunch processing, during launch count-down, and for postlaunch securing. The first phase of modifications to the Compressor Converter Facility (CCF), operational in April 1998, allowed the facility to accept bulk liquid helium from tanker containers and to off-load the helium at...
Topics: NASA Technical Reports Server (NTRS), LIQUID HELIUM, COMPRESSED GAS, PRELAUNCH TESTS, COUNTDOWN,...
Recommended approaches for space shuttle small payload integration and test (I&T) are presented. The paper is intended for consideration by developers of shuttle small payloads, including I&T managers, project managers, and system engineers. Examples and lessons learned are presented based on the extensive history of NASA's Hitchhiker project. All aspects of I&T are presented, including: (1) I&T team responsibilities, coordination, and communication; (2) Flight hardware handling...
Topics: NASA Technical Reports Server (NTRS), SPACE SHUTTLE PAYLOADS, PAYLOAD INTEGRATION, MISSION...
A second sounding rocket experiment was performed in the summer of 1998 in a continuing effort to validate the force limits techniques used in random vibration tests. The accuracy of the force limiting prediction techniques has not clearly been sufficiently confirmed with in-flight data as of this time. The flight was on board one of the BlackBrant series of sounding rockets. This vehicle is the one most commonly used for suborbital scientific payloads by NASA. An aluminum double deck structure...
Topics: NASA Technical Reports Server (NTRS), RANDOM VIBRATION, VIBRATION TESTS, SOUNDING ROCKETS, ROCKET...
The procedure for converting raw antenna signals (counts) from the Nimbus-7 Scanning Multichannel Microwave Radiometer (SMMR) to microwave radiances is described. The procedure entails taking the raw data stored on TAT data tapes, applying an interim prelaunch calibration, correcting for polarization mixing, and finally adjusting the calibration so that the observations conform to model calculations of oceanic radiances. The results are stored on TCT data tapes with the same format as the TATs,...
Topics: NASA Technical Reports Server (NTRS), MICROWAVE RADIOMETERS, MULTICHANNEL COMMUNICATION, NIMBUS 7...
The Fast Affordable Science and Technology Satellite (FASTSAT) project is a path finding effort to produce reliable satellite busses for different applications at an unprecedented speed and low cost. The project is designed to be a generational project and the first satellite produced is the Huntsville -01 (HSV-01) spacecraft. The subject of this report is the lessons learned gained during the development, testing, and up to the delivery of the FASTSAT HSV -01 spacecraft. The purpose of this...
Topics: NASA Technical Reports Server (NTRS), LESSONS LEARNED, RESEARCH AND DEVELOPMENT, SATELLITE DESIGN,...
The Visible/Infrared Imager Radiometer Suite (VIIRS) contains six dual gain bands in the reflective solar spectrum. The dual gain bands are designed to switch gain mode at pre-defined thresholds to achieve high resolution at low radiances while maintaining the required dynamic range for science. During pre-launch testing, an anomaly in the electronic response before transitioning from high to low gain was discovered and characterized. On-orbit, the anomaly was confirmed using MODIS data...
Topics: NASA Technical Reports Server (NTRS), ANOMALIES, IMAGING SPECTROMETERS, SOLAR SPECTRA,...
The Space Shuttle checkout is different from its Apollo predecessor. The complexity of the hardware, the shortened turnaround time, and the software that performs ground checkout are outlined. Generating new techniques and standards for software development and the management structure to control it are implemented. The utilization of computer systems for vehicle testing is high lighted.
Topics: NASA Technical Reports Server (NTRS), AUTOMATION, AVIONICS, COMPUTER TECHNIQUES, ONBOARD DATA...
Fatigue loads spectra for the prelaunch and liftoff flight segments of the Space Shuttle were developed. A variety o methods were used to determine the distributions of several important parameters, such as time of exposure on the launch, pad, month of launch, and wind speed. Also, some lessons learned that would be applicable to development of fatigue loads spectra for other reusable space vehicles are presented.
Topics: NASA Technical Reports Server (NTRS), COMPUTERIZED SIMULATION, FATIGUE LIFE, LAUNCH DATES, LOADS...
A flight experiment is being constructed to utilize the persistent microgravity environment of the International Space Station (ISS) to prove out operation of a microgravity compatible phase change material (PCM) heat sink. A PCM heat sink can help to reduce the overall mass and volume of future exploration spacecraft thermal control systems (TCS). The program is characterizing a new PCM heat sink that incorporates a novel phase management approach to prevent high pressures and structural...
Topics: NASA Technical Reports Server (NTRS), HEAT SINKS, INTERNATIONAL SPACE STATION, MICROGRAVITY, PHASE...
Cooperative efforts between NASA and the European Space Agency (ESA) in supporting the flight of Giotto to Halley's Comet included prelaunch checks of ESA navigation software and delivery of validated DSN radio metric tracking data during the mission. Effects of drag from passing through the coma are seen in data received pre and post encounter. The post encounter Giotto trajectory provides a solar occultation in January 1988, prior to returning to the Earth in 1990 for possible retargeting to...
Topics: NASA Technical Reports Server (NTRS), DEEP SPACE NETWORK, EUROPEAN SPACE AGENCY, GIOTTO MISSION,...
The Operational Land Imager(OLI) will be the main instrument on Landsat-8 when it launches in 2012. OLI represents a generational change from heritage Landsat instruments in its design but must maintain data continuity with the 30+ year Landsat data archive. As a result, OLI has undergone a stringent calibration and characterization campaign to ensure its characteristics are understood and consistent with past instruments. This paper presents an overview of the OLI design, its major differences...
Topics: NASA Technical Reports Server (NTRS), LANDSAT SATELLITES, PRELAUNCH TESTS, SPACE MISSIONS,...
The DSN command system provided the capability to enter commands in a computer at the deep space stations for transmission to the spacecraft. The high-rate telemetry system operated at 16,200 bits/sec. This system will permit return to DSS 14 of full-resolution television pictures from the spacecraft tape recorder, plus the other science experiment data, during the two playback periods of each Goldstone pass planned for each corresponding orbit. Other features included 4800 bits/sec modem...
Topics: NASA Technical Reports Server (NTRS), DATA ACQUISITION, GROUND SUPPORT SYSTEMS, MARINER 8 SPACE...
The shuttle system of interest in this paper is the shuttle's data processing system (DPS). The DPS is composed of the following: (1) general purpose computers (GPC); (2) a multifunction CRT display system (MCDS); (3) mass memory units (MMU); and (4) a multiplexer/demultiplexer (MDM) and related software. In order to ensure the correct functioning of shuttle systems, some level of automatic error detection has been incorporated into all shuttle systems. For the DPS, error detection equipment...
Topics: NASA Technical Reports Server (NTRS), AUTOMATIC TEST EQUIPMENT, DATA PROCESSING EQUIPMENT, DISPLAY...
The objective of this paper is to provide future ISS scientists and/or engineers with an overview of the coordination process for the preparation and implementation of the pre-launch checkout and transition activities as observed from the Marshall Control Flight Center (MSFC) Payload Operations Integration Center perspective. This includes 4 major phases: (1) Verification and validation of the new command and telemetry databases that are needed for new payload experiments and new onboard...
Topics: NASA Technical Reports Server (NTRS), GROUND SUPPORT SYSTEMS, INTERNATIONAL SPACE STATION, PAYLOAD...
The first of a new generation of microwave sounders was launched aboard the Suomi-National Polar-Orbiting Partnership satellite in October 2011. The Advanced Technology Microwave Sounder (ATMS) combines the capabilities and channel sets of three predecessor sounders into a single package to provide information on the atmospheric vertical temperature and moisture profiles that are the most critical observations needed for numerical weather forecast models. Enhancements include size/mass/power...
Topics: NASA Technical Reports Server (NTRS), PERFORMANCE TESTS, EVALUATION, PRELAUNCH TESTS, NUMERICAL...
This paper chronicles the rebirth of two national rocket testing assets located at NASA's Marshall Space Flight Center: the Dynamic Test Stand (also known as the Ground Vibration Test Stand) and the Static Test Stand (also known as the Main Propulsion Test Stand). It will touch on the historical significance of these special facilities, while introducing the requirements driving modifications for testing a new generation space transportation system, which is set to come on line after the Space...
Topics: NASA Technical Reports Server (NTRS), ARES 1 LAUNCH VEHICLE, ARES 5 CARGO LAUNCH VEHICLE, DYNAMIC...
An ice/frost/debris assessment was conducted for Space Shuttle Mission STS-29R. Debris inspections of the flight elements and launch pad are performed before and after launch. Ice/frost conditions on the external tank are assessed by the use of computer programs, nomographs, and infrared scanner data during cryogenic loading of the vehicle followed by an on-pad visual inspection. High speed photography is analyzed after launch to identify ice/debris sources and evaluate potential vehicle...
Topics: NASA Technical Reports Server (NTRS), DAMAGE ASSESSMENT, DEBRIS, FROST, ICE, LAUNCHING PADS,...
The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) was originally calibrated by the instrument's manufacturer, Santa Barbara Research Center (SBRC), in November 1993. In preparation for an August 1997 launch, the SeaWiFS Project and the National Institute of Standards and Technology (NIST) undertook a second calibration of SeaWiFS in January and April 1997 at the facility of the spacecraft integrator, Orbital Sciences Corporation (OSC). This calibration occurred in two phases, the first after...
Topics: NASA Technical Reports Server (NTRS), CALIBRATING, OCEAN DATA ACQUISITIONS SYSTEMS, OCEAN COLOR...
The purpose of the NASA Solar Electric Propulsion Technology Applications Readiness (NSTAR) project is to validate ion propulsion technology for use on future NASA deep space missions. This program, which was initiated in September 1995, focused on the development of two sets of flight quality ion thrusters, power processors, and controllers that provided the same performance as engineering model hardware and also met the dynamic and environmental requirements of the Deep Space 1 Project. One...
Topics: NASA Technical Reports Server (NTRS), NASA SPACE PROGRAMS, SOLAR ELECTRIC PROPULSION, ION...
A Debris/Ice/TPS assessment and integrated photographic analysis was conducted for Shuttle mission STS-55. Debris inspections of the flight elements and launch pad were performed before and after launch. Ice/Frost conditions on the External Tank were assessed by the use of computer programs, nomographs, and infrared scanner data during cryogenic loading of the vehicle followed by on-pad visual inspection. High speed photography was analyzed after launch to identify ice/debris sources and...
Topics: NASA Technical Reports Server (NTRS), DEBRIS, HIGH SPEED PHOTOGRAPHY, ICE, INSPECTION, PHOTOGRAPHS,...
The Landsat Data Continuity Mission (LDCM) is being developed by NASA and USGS and is currently planned for launch in January 2013 [1]. Once on-orbit and checked out, it will be operated by USGS and officially named Landsat-8. Two sensors will be on LDCM: the Operational Land Imager (OLI), which has been built and delivered by Ball Aerospace & Technology Corp (BATC) and the Thermal Infrared Sensor (TIRS)[2], currently being built and tested at Goddard Space Flight Center (GSFC) with a...
Topics: NASA Technical Reports Server (NTRS), INFRARED DETECTORS, LANDSAT SATELLITES, INFRARED RADIOMETERS,...
Space vehicles, such as the Space Shuttle, require intensive ground support prior to, during, and after each mission. Maintenance is a significant part of that ground support. All space vehicles require scheduled maintenance to ensure operability and performance. In addition, components of any vehicle are not one-hundred percent reliable so they exhibit random failures. Once detected, a failure initiates unscheduled maintenance on the vehicle. Maintenance decreases the number of missions which...
Topics: NASA Technical Reports Server (NTRS), COMPONENT RELIABILITY, COMPUTER SYSTEMS DESIGN, COMPUTER...
This report documents the procedures for utilizing and maintaining the Reliability & Maintainability Model (RAM) developed by the University of Dayton for the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) under NASA research grant NAG-1-1327. The purpose of the grant is to provide support to NASA in establishing operational and support parameters and costs of proposed space systems. As part of this research objective, the model described here was...
Topics: NASA Technical Reports Server (NTRS), AEROSPACE SYSTEMS, CONTROL SYSTEMS DESIGN, INPUT/OUTPUT...
The University of Dayton is pleased to submit this report to the National Aeronautics and Space Administration (NASA), Langley Research Center, which integrates a set of models for determining operational capabilities and support requirements during the conceptual design of proposed space systems. This research provides for the integration of the reliability and maintainability (R&M) model, both new and existing simulation models, and existing operations and support (O&S) costing...
Topics: NASA Technical Reports Server (NTRS), AEROSPACE SYSTEMS, COMPUTERIZED SIMULATION, CONTROL SYSTEMS...
