3
3.0
May 1, 2021
05/21
by
Theo vdB (TheoVDB)
data
eye 3
favorite 0
comment 0
A small power strip holder to fit over the edge of my bed, so that I have more useful cable length. STEP File included, so change it as you wish for your own power strip and bed edge.
Topics: stl, thingiverse, Powerstrip_holder, Organization
3
3.0
Apr 4, 2021
04/21
by
keisuke kawahara (ktansai)
data
eye 3
favorite 0
comment 0
This is a holder for power strips. Especially it fits one that is from Elecom like this https://www.elecom.co.jp/products/T-E6A-2410WH.html
Topics: thingiverse, Electronics, Powerstrip_holder, stl, Powerstrip
5
5.0
Apr 8, 2021
04/21
by
p s (bai0414)
data
eye 5
favorite 0
comment 0
Power Strip Wall Mount
Topics: Powerstrip_holder, Household, stl, thingiverse, wall_hook, Powerstrip
2
2.0
Jan 18, 2022
01/22
by
Rich Mitchell (richmitch)
data
eye 2
favorite 0
comment 0
I thought that my power board looked untidy, so I designed this box for it to sit in. The clip shows yellow pyramids which represent plugs in a 4 way powerboard underneath shown for illustration only. Note that this design requires the plugs to be disconnected first for the cables to pass through the 4 holes at the bottom. In hindsight I could have made slots in the lid or side which makes it easier to drop cables straight in but didn't look the way I wanted it. The main power supply cable goes...
Topics: powerboard, thingiverse, Powerstrip_holder, Powerstrip, stl, Containers
3
3.0
Mar 25, 2021
03/21
by
Marius (byteSizedMarius)
data
eye 3
favorite 0
comment 0
This is an under desk holder for the basic model of a cheap chinese smart powerstrip. It's all over aliexpress, banggood and amazon, often just with different brandings, but its all basically the same thing. The holes are very thick, but I made them to fit the screws I already had lying around. Theyre m5 20mms I think. Theyre honestly an overkill for this, but It works. I would advise you to flash sonoff tasmota on it. Its pretty hard compared to standard sonoff switches, but its definitely...
Topics: stl, powerstrip holder, zeeota, thingiverse, Organization, smart powerstrip, powerstrip
2
2.0
Jul 22, 2021
07/21
by
Stephen Murphy (hpd611)
data
eye 2
favorite 0
comment 0
Created this GE Power strip holder for my daughter's college dorm room. (Hence the "My Dad is Awesome!") But there is also a version without that claim printed on it. She planned to use command strips or double stick tape, but I also included one with screw holes. Hopefully someone else can use these too. Inner dimensions: 29mm X 52mm X 9mm. I printed it with 30% infill and it is plenty strong. Thanks for viewing!
Topics: Office, power_strip, Powerstrip_Bracket, stl, Powerstrip_holder, thingiverse
4
4.0
Mar 16, 2021
03/21
by
Paul (schinkenfisch)
data
eye 4
favorite 0
comment 0
Rossmann (German "drugstore") [sells](https://www.rossmann.de/de/haushalt-ideenwelt-best-basics-3-fach-steckdose-mit-usb-weiss/p/4305615494265) powerstrips with integrated USB power supply (max. 2100 mA) which are super convenient for raspberry (
Topics: thingiverse, enclosure, Rossmann, Electronics, stl, Powerstrip_Mount, Powerstrip_holder
4
4.0
Jun 21, 2021
06/21
by
Markus W. (MarkusBodensee)
data
eye 4
favorite 0
comment 0
Eine einfache und gut druckbare Halterung für Brennenstuhl Eco-Line Steckdosenleisten mit Schalter. A simple and easy to print holder for Brennenstuhl Eco-Line power strips with switch.
Topics: Powerstrip, Powerstrip_holder, thingiverse, steckdosenleiste, Other, stl, Steckdosenhalter,...
4
4.0
Mar 15, 2021
03/21
by
Chris Trim (Shaqx)
data
eye 4
favorite 0
comment 0
Mount your pictures without Screws. I designed this hook to mount my Wedge-Frame Pictures with Tesa Powerstrips. Many Pictures have a 15mm Wedge-Frame. It is made for 15mm Frames. You have to scale it for other sizes
Topics: tesa_powerstrips, thingiverse, Decor, Powerstrip, stl, Powerstrip_Mount, Powerstrip_holder
3
3.0
Jun 10, 2021
06/21
by
F1rst W0rd (F1rstW0rd)
data
eye 3
favorite 0
comment 0
I had a powerstrip with a round cable fitting at the end. Hence i needed to modify the original file from Kaisergidorah. If you like this remix i hope you give a like to the original as well.
Topics: Tool Holders & Boxes, Powerstrip_holder, Powerstrip_Mount, thingiverse, Powerstrip, stl
3
3.0
Mar 31, 2021
03/21
by
Felix Na (felixna)
data
eye 3
favorite 0
comment 0
The power cable for my OctoPi was too short for the power strip laying on the floor, so I needed to mount the power strip below the base plate. Constructed this clamp for the Ikea Koppla power strip so that the mounting screws were going to the top because I didn't want to screw into the drawer cabinet where the printer is on top. Included the FreeCAD file. PS: Yay, my first thingiverse post ;)
Topics: Powerstrip, Powerstrip_holder, thingiverse, Tool Holders & Boxes, stl, Powerstrip_Bracket
3
3.0
Jan 7, 2021
01/21
by
Tommy Kim (tommykim1998)
data
eye 3
favorite 0
comment 0
The ProHT power strip is one of the cheapest available, but doesn't come with any mounting hardware. This is a simple bracket to mount the power strip in any orientation. I have the ProHT Aluminum Pro Power Strip from Home Depot, I don't know how well this would work with other models. I mounted mine with 3/4" #8 screws, really just use what ever you have laying around.
Topics: Powerstrip, stl, Powerstrip_holder, thingiverse, mounting_bracket, Tool Holders & Boxes
1
1.0
Apr 20, 2022
04/22
by
Crea Print3d (creaprint3d__)
data
eye 1
favorite 0
comment 0
Best way to fix a powerstrip on something
Topics: thingiverse, Powerstrip, 3D Printing, easy_to_print, Powerstrip_holder, stl
2
2.0
Jul 22, 2021
07/21
by
Samuel Abt (SamAbt)
data
eye 2
favorite 0
comment 0
Holder plates for IKEA Koppla powerstrips. tested on swiss version, might work for other countries versions aswell. The important measurements are dispalyed in one of the pictures. For the scews I used some spare standart furniture screw with an od of 6.3 mm, with fit exactely in to holes on the bottom. The latches on the side are meant to hold down a cable with 6mm in diameter (e.g. an network cable).
Topics: Office, koppla, stl, ikea_koppla, Powerstrip_holder, Powerstrip_Mount, thingiverse, Powerstrip
4
4.0
Mar 15, 2021
03/21
by
Nelson Ignacio (3DMadScientist)
data
eye 4
favorite 0
comment 0
For that oval shaped powerstrip that does not have factory mounting holes.
Topics: Powerstrip_Bracket, 3D Printing, thingiverse, Powerstrip, stl, Powerstrip_Mount, Powerstrip_holder
5
5.0
Mar 15, 2021
03/21
by
Nelson Ignacio (3DMadScientist)
data
eye 5
favorite 0
comment 0
Corner compression mount for block style power strip.
Topics: Powerstrip_Bracket, 3D Printing, thingiverse, Powerstrip, stl, Powerstrip_Mount, Powerstrip_holder
1
1.0
Apr 19, 2022
04/22
by
(Fabianurban)
data
eye 1
favorite 0
comment 0
Simple clip-on powerstrip holder. Fast and easy to print, use a single 3 or 4mm screw for mounting. Fits most of the "EU Schuko Mehrfachsteckdosen", even the new design from Hornbach. Files: standard-Version = tight fit; powerclip_l = loose fit for bigger powerstrips Printing: Print from PETG with 3 perimeters and no support.
Topics: power outlet, Mehrfachstecker, thingiverse, Powerstrip, mehrfachsteckdose, EU-Powerstrip_Mount,...
3
3.0
Apr 27, 2021
04/21
by
Justin Berens (MultracHD)
data
eye 3
favorite 0
comment 0
Designed these clips to hold my AmazonBasics 6 outlet power strip, just screws into the Ikea lack table. Power Strip used: https://www.amazon.com/gp/product/B00TP1C51M/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Topics: thingiverse, ikea_lack, enclosure, 3D Printer Parts, ikea, stl, clip, Powerstrip_holder
3
3.0
Mar 19, 2021
03/21
by
Semjon Kerner (SemjonKerner)
data
eye 3
favorite 0
comment 0
This is yet another powerstrip-holder for powerstrips with dimensions 55x41mm. I printed them fast with 0.28mm layers and without support. They fit tightly and are strong enough so you can pull the plug without holding the powerstrip in place. Have fun!
Topics: socket, Powerstrip_holder, powersocket, Power_Strip_Bracket, thingiverse, Organization, Powerstrip,...
3
3.0
Jan 8, 2021
01/21
by
Sam Savety (symbadisch)
data
eye 3
favorite 0
comment 0
EN Hello everybody, I created these sturdy brackets for standard connector strips. The brackets would have to fit many common connector strips. The model used in the pictures is from the manufacturer Unitec. Material for the bracket: PLA or PETG My settings: Resolution 0.2 mm Wall thickness 1.2mm Floor and ceiling wall thickness 1.4 - 1.6 mm Printing speed 50 mm / s Infill type: cube Infill: 20% Support with BRIM (in Cura - across ~ 10-12%) Select print speed according to your printer standard....
Topics: power, mehrfachsteckdose, Powerstrip, 230v, stl, mounting, solution, steckdosenleiste,...
1
1.0
Apr 19, 2022
04/22
by
Leo Thimm (lthi98)
data
eye 1
favorite 0
comment 0
DE: Hallo, ich habe eine Befestigungsmöglichkeit für eine Steckdosenleiste an meinem elektrisch verstellbaren Schreibtisch gesucht und kurzerhand selbst modelliert. Kleben überzeugte mich in diesem Fall nicht so ganz, da man die Stecker auch regelmäßig ausziehen können sollte. Mal abgesehen vom regelmäßigen Auf und Ab des Tisches und dem damit verbundenen am-Kabel-Geziehe. Die Kabelbinder halten die Steckdosenleiste fest an ihrer Position, bei Bedarf ist ein axiales Verschieben aber...
Topics: Household, thingiverse, mounting, holder, steckdose, steckdosenleiste, Powerstrip,...
3
3.0
Sep 13, 2021
09/21
by
Louis Wouters (LouisWouters)
data
eye 3
favorite 0
comment 0
A simple mount to attach a power strip to a desk/table. Ideal for stand up desks. Power Strip: I'm using is the standard power strip from IKEA. If you're using another power strip some scaling in X and Y could be required to fit your exact model. Usage: Just screw directly through the plastic to mount the brackets to the desk. Rotate the power strip sideways to install/remove it
Topics: stl, under_desk_mount, thingiverse, Powerstrip, Under_desk_holder, Powerstrip_Mount, Office,...
4
4.0
Mar 15, 2021
03/21
by
Matthias Dlugi (mZe84)
data
eye 4
favorite 0
comment 0
Printed with DasFilament Orange PLA 0.2mm Layerheight 50mm/s Speed No Supports Needed Has to be rotated -90° on X axis before printing (see picture) Size: Width: 40mm x 53,6mm (with rounded inner corners) Screw Holes: 4mm
Topics: thingiverse, Power_Strip_Holder, Power_Strip_Mount, Electronics, Powerstrip, Power_Strip_Bracket,...
3
3.0
Jun 10, 2021
06/21
by
Ludwigs Laboratory (LudwigsLaboratory)
data
eye 3
favorite 0
comment 0
------------------------------------------- PowerStripBracket(V2) ------------------------------------------ Credit to smybadisch for V1, for some reason i cant set it as a remix: https://www.thingiverse.com/thing:4699923 ------------------------------------------------- PrintSettings ------------------------------------------------- Model: PowerStripBracket_V2_EffectiveSupport_1,5cm Printer: Ender3V2 SlicingSoftware: UltimakerCura Supports: For a complete clean print turn the model 180° and...
Topics: power_supply_mount, Organization, Eurostecker, stecker, Powerstrip_holder, doppelsteckdose,...
3
3.0
Jan 16, 2021
01/21
by
(hukuma)
data
eye 3
favorite 0
comment 0
I needed to have a powerstrip/surgeprotector hidden behind my Samsung TV. This uses standard VESA mounting holes (200mm x 200mm in example photos). M8-1.25 x 45 mm: https://www.homedepot.com/p/Everbilt-M8-1-25-x-45-mm-Zinc-Plated-Steel-Socket-Cap-Recessed-Hex-Screw-2-per-Bag-803438/204281936 KMC 6-Outlet Surge Protector is what I got from Amazon. The side where the power button is has thicker base around it, hence the first printed piece is a bit longer. As a bonus, that piece also goes right...
Topics: M8_nut, display, openscad, clamp, thingiverse, Powerstrip_holder, VESA_200, Powerstrip,...
3
3.0
Oct 15, 2021
10/21
by
Rob Eickmeier (RascalHoudi)
data
eye 3
favorite 0
comment 0
Brackets to mount the GE 45170 powerbar in the shop or under a desk.
Topics: thingiverse, Power_bar, GE 45170, stl, Organization, powerstrip, Powerstrip_Mount, powerbar,...
2
2.0
Dec 14, 2021
12/21
by
An St (_VeNoM_)
data
eye 2
favorite 0
comment 0
Halterung für die Wand, als auch Überkopfmontage einer Brennenstuhl Ecolor Steckdosenleiste 4-fach mit USB-Ladebuchse. https://www.amazon.de/Brennenstuhl-Steckdosenleiste-USB-Ladefunktion-Steckerleiste-Ladebuchsen-wei%C3%9F-schwarz/dp/B07K769CY2/ref=sr_1_19?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=Brennenstuhl&qid=1636669768&s=diy&sr=1-19&th=1 Beide USB Buchsen sind frei zugänglich, ebenso eine Aussparung für das Kabel auf der anderen Seite ist vorhanden. In...
Topics: Brennenstuhl, USB_Holder, holder, Power Strip Mount, usb, Mount, steckdosenleiste,...
6
6.0
Apr 20, 2021
04/21
by
Kim Nielsen (8orge)
data
eye 6
favorite 0
comment 0
( I have another version of this model here on thingiverse ,that mounts in an angled position on the surface of a table on the edge : https://www.thingiverse.com/thing:3636668 ) If you found this design very helpful or otherwise wish to support me ,you can buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please consider using this link : This is a set of brackets to mount your power-strip 54mm x 38.5mm (EU model) up under your workbench ,table or...
Topics: Power Strip Desk, thingiverse, Powerstrip Table, Powerstrip holder, Power Strip Bracket, Power...
4
4.0
Mar 9, 2021
03/21
by
Kim Nielsen (8orge)
data
eye 4
favorite 0
comment 0
( I have another version of this model here on thingiverse ,that mounts under the table ,get it here : https://www.thingiverse.com/thing:3327440 ) If you found this design very helpful or otherwise wish to support me ,you can buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please consider using this link : This is a set of angled brackets to mount/hold your power-strip 54mm x 38.5mm (EU model) at the edge off your workbench , table or where ever you...
Topics: Powerstrip Workbench, Power Strip Angle, thingiverse, Powerstrip Table, Angled Power Strip,...
