3
3.0
Jun 21, 2021
06/21
by
Phil Maddox (Phil_Maddox)
data
eye 3
favorite 0
comment 0
Lower control arm 17A mod Added a radius at specific places to reduce possible fractures and added a sculpt to the arm for aesthetics
Topics: Tarmo 4 mod, R/C Vehicles, Tarmo 4, thingiverse, stl, tarmo4
3
3.0
Jun 21, 2021
06/21
by
Phil Maddox (Phil_Maddox)
data
eye 3
favorite 0
comment 0
Mod to lower control arm Radiused internal corners to minimize stress fractures & sculpted control arm main body
Topics: R/C Vehicles, thingiverse, tarmo4_mods, TARMO 4, stl, tarmo4
3
3.0
Mar 5, 2021
03/21
by
(Petclaud)
data
eye 3
favorite 0
comment 0
Front support for the Skull Body for the Tarmo 4 Use 2x 3mm heat insert STEP file included. Print flat on the bed - no supports needed See also these mods: - Split output gear: https://www.thingiverse.com/thing:4523853 - Strengthened steering knuckle mount: https://www.thingiverse.com/thing:4534256
Topics: stl, R/C Vehicles, skull body, Tarmo4, tarmo, Tarmo 4, thingiverse
2
2.0
Mar 9, 2021
03/21
by
(Petclaud)
data
eye 2
favorite 0
comment 0
Further improved version of https://www.thingiverse.com/thing:4523853 to allow horizontal printing for the Tarmo4 RC car Even with Nylon, the output gear kept breaking at the drive shaft connection. Hence redesigned it such that not only the gears but als the connections can be printed completely horizontal for maximum strength. In addition, if a gear strips or drive shaft connector breaks, these can be replaced easily You will need 5 M3x14mm bolts and 5 locking nuts It can be printed without,...
Topics: Tarmo, Tarmo4, R/C Vehicles, stl, thingiverse, Output gear, Tarmo 4
1
1.0
Apr 20, 2022
04/22
by
Kuglafili (Kuglafili)
data
eye 1
favorite 0
comment 0
These are tires that fit perfectly for the Tarmo4. You must use the longer wheel adapters! This is not my model it is from : https://www.thingiverse.com/palmiga
Topics: Tarmo 4, thingiverse, rc_tires, tarmo4_accessories, tarmo4_upgrades, tarmo4, Tarmo, tarmo4_mods,...
4
4.0
Apr 28, 2021
04/21
by
Jay Chase (Charmande)
data
eye 4
favorite 0
comment 0
Using some preexisting DJI FPV mounts for drones I remixed them to work for the Tarmo4 as an FPV system. The FC_ESC_CaseBot is glued to the center gear box top using Guerrilla Glue (any glue will do). I decided to do it this way to allow for mounting as desired by the user. The camera sits left of the air unit center line so gluing it on the right side of the gearbox lid allows for the camera to be perfectly centered. I included a basic wiring diagram of how I have my setup wired. The flight...
Topics: tarmo 4, tarmo, thingiverse, tarmo fpv, dji, tarmo4, dji fpv air unit, tarmo4 accessories, dji fpv,...
