3
3.0
Mar 26, 2021
03/21
by
João Pedro Gomes (3dmakerJ)
data
eye 3
favorite 0
comment 0
This is a simple pen holder designed for the Wacom Intuos pen. It should work with other models with minor adjustments though. Fusion 360 files were included in case anybody wants to edit the model.
Topics: stl, intuos, thingiverse, wacom_intuos_pen, Wacom_Intuos, Parts, pen_holder
1
1.0
Apr 19, 2022
04/22
by
jake shroff (SHROFFY77)
data
eye 1
favorite 0
comment 0
WACOM INTUOS PRO MEDIUM STAND. MADE IN DESIGN SPARK. PRINTED ON THE CHIRON WITH 0.4MM
Topics: stl, Wacom_Intuos, Accessories, thingiverse
3
3.0
Apr 4, 2021
04/21
by
Wipop Panyatipsakul (owl_hor)
data
eye 3
favorite 0
comment 0
Adjustable stand for wacom intuous tablet. Require: -wcstage_pillar.stl x 2 (recommend [normal x 1,mirror x 1]) -wcstage_track.stl x 2 (recommend [normal x 1,mirror x 1]) -wcstage_stick.stl x 1
Topics: thingiverse, Art Tools, Wacom_Intuos, stl
4
4.0
Apr 13, 2021
04/21
by
Wayne Whaley (wwhaley)
data
eye 4
favorite 0
comment 0
Created this stand to hold 5 Wacom Intuos graphics tablets. There is space in the back to hold the cords. It is very stable and I have had one sitting on my classroom desk for 3 years with no mishaps!
Topics: thingiverse, Wacom_Intuos, Tablet, stl, stand, classroom
5
5.0
Mar 3, 2021
03/21
by
Jarrod Cunningham (ThunderousCriminal)
data
eye 5
favorite 0
comment 0
Wacom Intuos angled tablet stand.
Topics: Computer, thingiverse, wacom, Wacom_Intuos, stl
4
4.0
Mar 25, 2021
03/21
by
brent scott (pixel2)
data
eye 4
favorite 0
comment 0
Replace the original rubber grip from your Wacom Intuos 4 pen. The rocker extension is great for heavy users of middle and right click.
Topics: stl, thingiverse, Wacom_Intuos, wacom, Computer
8
8.0
Apr 17, 2021
04/21
by
David Carvalho (InnovaMedia)
data
eye 8
favorite 0
comment 0
Pretty straight forward design. I was just looking for a simple stand got my pen tablet and couldn't find one that I liked. Enjoy!
Topics: thingiverse, Wacom_Intuos, stl, tablet_stand, Other
3
3.0
Jan 7, 2021
01/21
by
Albert Dupontel (bdududo)
data
eye 3
favorite 0
comment 0
This table's width makes it slightly annoying to write near the edges part. This pad is intended to make it easier to write on the bottom and the right part (or left part by mirroring the thing).
Topics: stl, tablet, Tablet, Wacom_Intuos, thingiverse, pad
3
3.0
Apr 8, 2021
04/21
by
James Forder (Caramac)
data
eye 3
favorite 0
comment 0
Ergonomic comfort grip for Intuos pen. After prolonged use, I found the rubber grip got slippy and lead to the pen rotating and the buttons moving away from my finger. I designed this grip for better control. I've used this grip for 20+ hours now and its really comfy and makes sure the buttons are always right by your finger.
Topics: Intuos pen, Intuos grip, stl, thingiverse, wacom grip, Wacom_Intuos, Tablet, wacom_intuos_pen,...
11
11
Jan 18, 2021
01/21
by
Anou Estudios Multimedia (anouem)
data
eye 11
favorite 0
comment 0
Wacom stand for intous, Cintiq and bamboo
Topics: Wacom_Intuos, thingiverse, tablet_stand, Tablet, stl
8
8.0
Jan 15, 2021
01/21
by
Micke Meck (3DFinTech)
data
eye 8
favorite 0
comment 0
Simple but very good Wacom wall storage!
Topics: thingiverse, stl, Wacom_Intuos, Other, wall_storage
3
3.0
Jun 11, 2021
06/21
by
Peter Andersson (lugiber)
data
eye 3
favorite 0
comment 0
I remixed the files from jdacal found here: https://www.thingiverse.com/thing:702153#Summary My colleagues wanted to be able to store their tablets under their tables when they weren't using them. So I just extended the originals to 18cm in length. Hope someone finds this useful!
Topics: Organization, Wacom_Intuos, Wacom_tablet, thingiverse, stl
4
4.0
May 1, 2021
05/21
by
DJ McHugh (TheRealMcHugh)
data
eye 4
favorite 0
comment 0
Designed in Fusion360, this is intended to safely store my Intuos on it's side so it doesn't get buried under papers. I omitted the pen stand since the Wacom one works great for me. 20% infill, 0.18MM layer, about 4.5 hours to print on the Creator Pro
Topics: stl, tablet, wacom, thingiverse, Tablet, Wacom_Intuos
8
8.0
Jan 16, 2021
01/21
by
Ian Mackinnon (ianmackinnon)
data
eye 8
favorite 0
comment 0
Pen holder and cable tidy for Wacom Intuos3 tables. Can be positioned anywhere along the back edge. They are designed to slightly grip the tablet but I would also recommend using masking tape underneath to keep them in position.
Topics: Wacom_Intuos, wacom, thingiverse, Graphics_Tablet, Computer, stl
2
2.0
Apr 19, 2022
04/22
by
Emmy Desrosiers-Bouvier (EmmyBouDe)
data
eye 2
favorite 0
comment 0
This is a Pen tablet holder designed to fit 6 Wacom Intuos, with a compartment to store the wires.
Topics: thingiverse, holder, Tablet, Wacom_Intuos, stl, pen tablet
4
4.0
Mar 25, 2021
03/21
by
Ruben Smit (smith12595)
data
eye 4
favorite 0
comment 0
Its a drawing tabled holder aimed for the Wacom Intuos.
Topics: stl, wacon, thingiverse, Wacom_Intuos, Tablet, tablet_stand
7
7.0
Jan 19, 2021
01/21
by
None None (ruben_zilzer_3409)
data
eye 7
favorite 0
comment 0
My dog chewed my Wacom Intuos pen, so i made a replacement grip, and button, the button is madewithtinkercad https://www.thingiverse.com/thing:1249458 and the grip is printed in flexible filament (filaflex)
Topics: thingiverse, pen grip, Tablet, wacom_intuos pen, stl, pen
10
10.0
Jan 12, 2021
01/21
by
All Smiles (TameGorilla)
data
eye 10
favorite 0
comment 0
Saw the need for a stylus holder (it holds the stylus upside down to preserve the tip). Sits nice and tidy next to your Wacom Intuos tablet. Really not much more to say about it Once again another utilitarian design. Please be sure to increase your top layers, in he shown image I am using 6. Otherwise you could be left with gaps / pillowing.. YUCK! In the shown model I used Hatchbox blue glow in the dark PLA @ 1.75mm extruded at .1500 mm layer height @ 6000 mm using Prusa I3 MK2 with the titan...
Topics: thingiverse, Wacom Pen Tablet, stl, Wacom Intuos, Art Tools
4
4.0
Mar 13, 2021
03/21
by
Will Frank (Perplexis)
data
eye 4
favorite 0
comment 0
A nice pen topper for your Wacom Intuos pen. Should fit perfectly on a 10 mm wide pen as well.
Topics: thingiverse, Wacom_Intuos, Wacom_Pen_Tablet, stl, Electronics
10
10.0
Jan 18, 2021
01/21
by
Kees Riphagen (keesprinter)
data
eye 10
favorite 0
comment 0
perfect to hold you apple keyboard above your wacom. The cutouts on the bottom and one on the top are to put rubber (40 mm in length and 5 mm ⌀) inside.
Topics: Wacom_Intuos, wacom, thingiverse, holder, apple, keyboard, Computer, stl
3
3.0
Mar 26, 2021
03/21
by
Alejo ballesteros (alejo92)
data
eye 3
favorite 0
comment 0
I´ve made this to hold my tablet, that´s all. :)
Topics: stl, Wacom, thingiverse, Wacom_Intuos, pen_holder, 3D Printing
85
85
Aug 13, 2020
08/20
by
Wacom
software
eye 85
favorite 0
comment 0
My personal driver set for the Wacom Intuos tablet line. This is from 2018, but it still manages to perform well on my laptop as of 2020
Topics: wacom, tablet, drawing, wacom intuos, intuos, drivers, art, 2018
8
8.0
Apr 17, 2021
04/21
by
DcD Maker (Dinh_D)
data
eye 8
favorite 0
comment 0
This is a remixed of bdeleon's Wacom Intuos Pen holder: https://www.thingiverse.com/thing:301973 Designed to fit in the Wacom Intuos Art (small) wireless adapter slot. The holder is sized for the included pen (10cm diameter).
Topics: wacom, pen_holder, thingiverse, Wacom_Intuos, stl, Art Tools
10
10.0
Apr 17, 2021
04/21
by
Stella Foxxie (StellaFoxxie)
data
eye 10
favorite 0
comment 0
i made a pen holder that fits into the wireless expansion slot in the wacom intuos i designed this to keep track of the pen when i take it with me so i don't loose it feel free to tweak the file if you need too
Topics: intuos, wacom, thingiverse, Wacom_Intuos, stl, penholder, Art Tools
3
3.0
Mar 26, 2021
03/21
by
Lorenzo Martinelli (Chzo90)
data
eye 3
favorite 0
comment 0
For smaller printers use the 1,2,3 files You'll need to print the third file 3 times
Topics: stl, thingiverse, Art Tools, Wacom_Intuos, intuos_pro_small, stand
6
6.0
Jan 21, 2021
01/21
by
Alexander Pruss (arpruss)
data
eye 6
favorite 0
comment 0
This is a shorter remix of the excellent fixed Wacom Intuos 3 stylus button. The shorter version makes the upper part of the button work better. Print without supports, and then separate the snaps with a hot x-acto knife or razor.
Topics: Computer, wacom, stl, thingiverse, Wacom_tablet, Intuos3, wacom_intuos_pen
7
7.0
Jan 20, 2021
01/21
by
Andrew Weekes (alw_Audio)
data
eye 7
favorite 0
comment 0
My second CAD design. Having recently got an Intuous tablet on offer, I found the pen holder at the back of the tablet a pain. Since I have a steel-framed desk and had some strong magnets kicking around, I made a simple pen holder that magnetically attaches to my desk. The original CAD files are public, so feel free to remix for whatever magnets you can find - I ended up glueing the magnet in place as the countersunk screw sat slightly proud of the magnet, causing the holder to spin, removing...
Topics: Wacom_Intuos, wacom_pen_holder, wacom, thingiverse, Wacom_tablet, Computer, stl
5
5.0
Jan 20, 2021
01/21
by
fab aktarus (aktarus54)
data
eye 5
favorite 0
comment 0
c'est juste un support pour une tablette Wacom intuos 3D. celui ci est réglable pour pouvoir incliner la tablette . j'ai collé du caoutchouc (morceau de chambre a air de velo) sur le support afin d’éviter que la tablette ne glisse.j'ai fait de même sous la piece 2 . afin d'eviter que le support ne glisse sur le bureau.
Topics: Wacom_Intuos, wacom, holder support, thingiverse, tablette, Art Tools, 3d intuos, stl
4
4.0
Mar 15, 2021
03/21
by
Izu Watanabe (izoony)
data
eye 4
favorite 0
comment 0
Wacom Pen Grip Pen grip for WACOM Intuos (CTL-6100WL)
Topics: thingiverse, wacom, Computer, Wacom_Intuos, Wacom_tablet, stl, pen_grip, Wacom_Pen_Tablet
3
3.0
Jan 19, 2022
01/22
by
Mike Behrensmeyer (mbehrensmeyer1034)
data
eye 3
favorite 0
comment 0
Wacom Intuo Tablet Stand and Pen Holder. Simple design but very Functional.
Topics: Wacom_Intuos, Drawing_tablet_stand, Computer, thingiverse, wacom_pen_holder, stl, pen_holder
4
4.0
Mar 9, 2021
03/21
by
Vasilis Christodoulou (vasilis301)
data
eye 4
favorite 0
comment 0
Wacom Intuos Pro S base with 2 USB spots The tablet holding place is slightly wider to accommodate for padding to prevent scratching the tablet
Topics: wacom, stl, thingiverse, Wacom_tablet, 2D Art, Wacom_Intuos, Wacom_Pen_Tablet
3
3.0
Jun 11, 2021
06/21
by
(squirrelf)
data
eye 3
favorite 0
comment 0
My table is too small for my large intros pro to stay there full time, but want easy access so I made a sand to sit on the floor next to the computer easy to grab and put back. There is enough tolerance that you can add a thin layer of padding (less than 1mm for each side), but otherwise works well without it. Holds the large version in vertical position very well, so will hold other version just as well. I printed it in PETG but should work well in PLA If you want to use it for other stuff, I...
Topics: intuos, Wacom_Intuos, Tablet, art, storage, thingiverse, graphic_tablet, wacom, design, stl
3
3.0
Jun 7, 2021
06/21
by
Andrey Davydov (Dacodesign)
data
eye 3
favorite 0
comment 0
Wacom Intuos3 accessory
Topics: intous3, Intuos3 accessory, Wacom, thingiverse, stl, Computer, Wacom accessory, Wacom part,...
8
8.0
Jan 20, 2021
01/21
by
Jules M. (elhooty)
data
eye 8
favorite 0
comment 0
Wacom intuos pro stand for small to large, has slots for usb, battery, wifi thingy, and stylus holder.
Topics: Wacom stand, Wacom_Intuos, thingiverse, Wacom, drawing tablet, Tablet, stand, intuos, stl, intuos...
3
3.0
Mar 26, 2021
03/21
by
Aivaras (AS_Motion_Lab)
data
eye 3
favorite 0
comment 0
After having to buy my 3rd pen because they keep getting mixed up & lost, I decided to make this colour ring so it will stand out in the studio. You can buy them (if you can find them!), but if you have a printer and 5cm of filament, it's almost free! This is for the older pen (KP501E) - which is used with the older tablets: Previous generation Intuos Pro (PTH451, PTH651, PTH851) Intuos5 (all models) Intuos4 (all models) Cintiq 21UX (DTK2100) Cintiq 24HD Cintiq 24HD touch Cintiq 22HD Cintiq...
Topics: stl, KP501E, thingiverse, Art Tools, Wacom_tablet, Wacom_Intuos, wacom, Wacom_Pen_Tablet,...
5
5.0
Mar 22, 2021
03/21
by
Alberto Parrón (Bhizio35)
data
eye 5
favorite 0
comment 0
I have design this base for the Wacom pen. I didn't test with other brands, but should work with similar tablet pens If you have any question just send me a message. Enjoy it!!
Topics: stl, tablet, Wacom_Bamboo, wacom, Wacom_tablet, pen, Wacom_Intuos, Art Tools, base, thingiverse
5
5.0
Mar 3, 2021
03/21
by
Valentin Mladin (vmladin)
data
eye 5
favorite 0
comment 0
Modeled this in Fusion 360. It was designed for my Intuos pen, but it can accommodate various pens. The upper hole is 14mm in diameter and the bottom one that the pen rests on is 6mm in diameter. The initial design had a cut in the middle of the bottom part, but I uploaded it here with the full surface as someone might want to secure it to the table with a double adhesive tape This was printed on a Form 2, but I would assume any FDM would do the the job. The print was mildly sanded. I need to...
Topics: wacom_pen_holder, pen_holder, thingiverse, wacom, Wacom_Intuos, intuos, stl, Tool Holders &...
4
4.0
Mar 25, 2021
03/21
by
Shadow Folf1 (ShadowFolf1)
data
eye 4
favorite 0
comment 0
Used to prop up Wacom Intuos Tablet. The standard Wacom pen can fit in the pen hole to the right or left of the model. It should also work with most small sized drawing tablets with pens (depending on pen top/bottom size). Pictured above is only the Wacom Intuos Tablet Holder (TRIANGLE RIGHT). The instructions below apply to this specific print, but should work on all files.
Topics: stl, desktop, thingiverse, Wacom_Intuos, tablet, wacom, holder, Wacom_tablet, stand, pen, 3D...
3
3.0
Apr 4, 2021
04/21
by
Alexandre GRIERE (HeyIAmBob)
data
eye 3
favorite 0
comment 0
This is a stand designed for my wife's wacom intuos art (medium size).
Topics: thingiverse, Office, Wacom_Intuos, stl, wacom, designer_furniture, wacom_tablet_stand,...
8
8.0
Jan 16, 2021
01/21
by
Jason Reilly (ncgvalkyrie)
data
eye 8
favorite 0
comment 0
As always if you print it can you please comment with photos or suggestions if you have any. After searching around and finding loads of Wacom Intuos pen holders that are either too small or too light, I decided to make my own and it came out great. It holds the pen for my Wacom Intuos Pen Small tablet, but I have made to slightly larger than needed so It will probably fit loads of others aswell, there is also a small indent in the bottom of the holder so if you put the pen in tip first the tip...
Topics: thingiverse, Wacom_tablet, wacom, stl, Computer, Wacom_Intuos, Wacom_Bamboo, fusion_360,...
9
9.0
Apr 17, 2021
04/21
by
Ari Shaki (falangy)
data
eye 9
favorite 0
comment 0
Originally made for the Wacom One (ctl-471), with a 9 mm width opening inside, but I made a version that _should_ fit the Intuos pro (and bamboo too perhaps) with 11 mm width opening.
Topics: stand, holder, wacom, wacom_one, Wacom_tablet, Replacement Parts, thingiverse, Wacom_Intuos, stl,...
5
5.0
Mar 8, 2021
03/21
by
qumad 6 (qumad)
data
eye 5
favorite 0
comment 0
This is a case of Wacom Intuos pro pen 2. I don't know if other version stylus fits this case. I printed this with PETG, and the result of 'pencase3base' is bended. So, the lid (I named 'pencase3cover') doesen't fit it. That is why, I made 'adjpencase3cover'. 'adjpencase3cover' is tight, so you have to adjust it by sanding with abrasive paper. I recommend that you print 'adjpencase3cover' and 'pencase3base' and adjust. THX for reading.
Topics: Tool Holders & Boxes, wacom, pro_pen, stylus_case, stl, thingiverse, Wacom_Intuos, pro_pen_2,...
6
6.0
Apr 20, 2021
04/21
by
JAMES RICHARDSON (gizmojim)
data
eye 6
favorite 0
comment 0
Want to clear off some of your precious desktop space? The Wacom Intuos4 tablet is quite large, and when not in use, takes up lots of desktop real estate. I made this bracket to set it up on the the wall just above my desk, within easy reach. Mirror the bracket in your slicer to make the mate. I used TPU because it is pliable (just in case the screws didn't fit - they did). I may add a holder for the mouse that came with the drawing tablet. It mounts to the wall with standard drywall screws.
Topics: thingiverse, Wacom_Intuos, stl, bracket, wall_mount, mounting_bracket, Office, Intuos4,...
7
7.0
Apr 18, 2021
04/21
by
Thomas Ekbauer (eki27)
data
eye 7
favorite 0
comment 0
so that he has weight, inside you have to fill with plasta.
Topics: wacom, Wacom_tablet, thingiverse, Wacom_Intuos, stl, Wacom_Pen_Tablet, Art Tools, Wacom_Bamboo,...
3
3.0
Jan 7, 2021
01/21
by
Rémi LEBLOND (remi67)
data
eye 3
favorite 0
comment 0
Ce support permet de ranger le stylet de sa tablette graphique sur le bord de l'écran. This support allows to store the pen of its graphic tablet on the edge of the screen.
Topics: stylet, stl, Wacom_Bamboo, Computer, wacom, Porte_stylet, Wacom_Pen_Tablet, Wacom_Intuos,...
3
3.0
Oct 14, 2021
10/21
by
Lam Sing (lammatt)
data
eye 3
favorite 0
comment 0
wacom stylus holder
Topics: thingiverse, stylus, stl, pen_holder, Wacom_Intuos, wacom, wacom_pen_holder, stylus_holder,...
7
7.0
Jan 3, 2021
01/21
by
Fredrik Hamrebjörk (FredrikHamrebjorkDesigns)
data
eye 7
favorite 0
comment 0
I was a bit dissapointed in the mini-usb connector on my Wacom Intuos Pro Medium, so I decided to make a slimmed cable guard to stop it from wiggling. Both guard and cable sits securely, the cable doesnt feel like you could break the tablet by looking at it in the wrong way anymore...
Topics: cable_guard, Wacom_tablet, stl, intuos, intuos_pro, Art Tools, Wacom, Wacom_Pen_Tablet,...
8
8.0
Jan 20, 2021
01/21
by
Harkaranvir Singh (harkaranvir)
data
eye 8
favorite 0
comment 0
Cutomize your Pen by printing the ring in any color you like.
Topics: Wacom_Bamboo, Wacom_Intuos, wacom_pen_holder, Wacom, thingiverse, Wacom_Pen_Tablet, Wacom Ring,...
3
3.0
Jan 4, 2021
01/21
by
Jens de Klerk (jensdeklerk)
data
eye 3
favorite 0
comment 0
WACOM PEN HOLDER - This pen holder is suitable for the Wacom Pro Pen 2 and Wacom Pro Pen 3D. Very stable and an eyecatcher on your desk!
Topics: Wacom_tablet, pencil, stl, Wacom_Bamboo, pen, wacom, pen_holder, brush, Wacom_Pen_Tablet,...
2
2.0
Sep 13, 2021
09/21
by
Daniel Lönnheden (Nordic_Rex)
data
eye 2
favorite 0
comment 0
I've not printed this on either resin nor fdm yet. So I would love to get some feedback if you decide to print this. This version is made hollow since I printed this on a nylon powder HP printer at work and didn't want to waste material. But I recon it would work well with hollow for resin printing as well.
Topics: stl, Mjolnir_Stand, stylus_holder, thingiverse, mjolnir, pen_holder, thor, wacom_pen_holder,...
