0
0.0
Mar 10, 2022
03/22
Mar 10, 2022
by
Vilius Sabunas (Ghos7ar)
data
eye 0
favorite 0
comment 0
2D Snake head. Easy print.
Topics: snake, thingiverse, 2d_art, 2d_wall_art, wall_mount, black, easy_to_print, Wall_Hanger, 2D Art,...
0
0.0
Mar 9, 2022
03/22
Mar 9, 2022
by
Darren Sontos (SweetAppleAmperes)
data
eye 0
favorite 0
comment 0
I designed this to hold my Dell Visor WMR headset with the front pointing up, so dust wouldn't get on the lenses. You could use it for headphones or anything else that needs to hang. There are two versions: One to use with standard wall anchors, and one that hooks into a metal shelving unit that I have. Should print pretty easy with just about any material or settings
Topics: thingiverse, headphone_holder, headphone_hanger, wall_mount, WMR, dell_visor, Wall_Hanger, Video...
0
0.0
Mar 8, 2022
03/22
Mar 8, 2022
by
Adrian Meyer (Saffa3d)
data
eye 0
favorite 0
comment 0
The only hook I use around the house and in the workshop. Can hang nearly anything on it. tools/bath towels/hats/coats/power cords etc. I have attached some pics to demonstrate. The base is 25mm wide(same as most double sided tapes) I used clear 3m double sided tape - works very well for me. I hope you like it, Let me know if you need any changes. Print on its side. No support needed.
Topics: Household, thingiverse, wall_mount, coat_hook, Towel_Hanger, coat_hanger, Wall_Hanger, wall_hook,...
0
0.0
Mar 6, 2022
03/22
Mar 6, 2022
by
Ando Roots (sqrooted)
data
eye 0
favorite 0
comment 0
An addon piece to a shelf for hanging a vacuum's "arm" from it. Helps with organization. Designed for Ikea "Boaxel" shelves (~20mm front piece thickness) and Philips "Performer Silent" vacuum (35mm pipe diameter).
Topics: thingiverse, Philips, Wall_Hanger, Organization, stl, vacuum, boaxel
0
0.0
Mar 4, 2022
03/22
Mar 4, 2022
by
Nick Ramsey (maker1218)
data
eye 0
favorite 0
comment 0
A large wall hook for your large items that may need to be put up on a wall.
Topics: Household, hook, thingiverse, utility_hook, hanger, Wall_Hanger, wall_hook, stl
0
0.0
Mar 3, 2022
03/22
Mar 3, 2022
by
Mike Frame (Mframe)
data
eye 0
favorite 0
comment 0
Quick wall hanger for ladders, step stools, and other items you might want to wall mount.
Topics: thingiverse, hanger, Wall_Hanger, Tools, stl, ladder
0
0.0
Mar 2, 2022
03/22
Mar 2, 2022
by
Nat W. (Chiyetanka)
data
eye 0
favorite 0
comment 0
Lacrosse Stick Wall Hanger Center gap is 40mm wide. Holes are 5mm with 7x2mm sink. Walls are all 5mm thick.
Topics: thingiverse, stick, lacrosse, wall, hanger, Wall_Hanger, stl, Sport & Outdoors
0
0.0
Mar 1, 2022
03/22
Mar 1, 2022
by
David Robinson (Belstone)
data
eye 0
favorite 0
comment 0
This is my wall-mounted version of batk0's Zelda Game&Watch stand . This stand can be mounted on the wall either on a screw or by adhesive strips. The left sword panel is now a secret button that pushes out the Game&Watch. Lining the Game&Watch cavity with felt help keep the system snug in place. Springs: 2 x 7mm diameter x 10mm tall Axle rod: Thin coat hanger
Topics: thingiverse, Game_and_Watch_Stand, wall_mount, game, game_and_watch, wall, Wall_Hanger,...
0
0.0
Feb 26, 2022
02/22
Feb 26, 2022
by
davide pantano (davi4pant)
data
eye 0
favorite 0
comment 0
The font is "Gingerbread House"
Topics: Household, thingiverse, holder, key, wall, Wall_Hanger, wall_hook, stl, keyhook
0
0.0
Feb 25, 2022
02/22
Feb 25, 2022
by
Akashdeep Singh (PAnnu_ap)
data
eye 0
favorite 0
comment 0
It's a simple tool hanger. Organize your workplace with this functional tool hook. You can easily mount this on the wall with two or one screw. The screw holes were sized with drywall screws in mind, but various types of screws will probably fit easily enough.
Topics: thingiverse, tool_hanger, Tool Holders & Boxes, Wall_Hanger, simple, wall_hook, stl, tool_holder
0
0.0
Feb 24, 2022
02/22
Feb 24, 2022
by
Marco Mans (mmans)
data
eye 0
favorite 0
comment 0
A little Laptop Hanger made of 3D Text. I use Tesa ultra strong tape to stick it to my desk.
Topics: 3D_text, thingiverse, laptop, hanger, Wall_Hanger, stl, Computer
0
0.0
Feb 24, 2022
02/22
Feb 24, 2022
by
(WatermelonWolverine)
data
eye 0
favorite 0
comment 0
Remix of BiduMadio's tentacle hook for fitted for corners. See: https://www.thingiverse.com/thing:5261573 for information on how to print this.
Topics: hook, thingiverse, tentacle, corner, eldritch, Wall_Hanger, wall_hook, stl, Decor
0
0.0
Feb 18, 2022
02/22
Feb 18, 2022
by
Zhu Jianwei (CurlyFu)
data
eye 0
favorite 0
comment 0
hanging board（216mm*216mm） The _fit version sets size redundancy.
Topics: Household, thingiverse, hanger, Wall_Hanger, stl
0
0.0
Feb 17, 2022
02/22
Feb 17, 2022
by
Zac Squires (Squirez)
data
eye 0
favorite 0
comment 0
Small slim-line wall mount for the DGI Tello drone. Something to show it off but nice and compact. Holds Tello drone and 3 x batteries. I fixed to the wall with a strong velcro picture hanging strip and is solid enough for the purpose. Print time: 4h 56m See pictures below.
Topics: base, Ryze_Tello, wallmounted, stl, Hobby, DJI_Tello, storage, holder, battery, stand,...
0
0.0
Feb 16, 2022
02/22
Feb 16, 2022
by
David Burnham (caederus)
data
eye 0
favorite 0
comment 0
We wanted a way to have the gallon sized ziplock bags easily accessible. So I made a two part box that can be hung inside the panty door and hold the zip lock bags. The bottom part has screw holes to attach to the door and a lip to keep the top part from going in too deep.
Topics: Pantry, organization, Gallon Ziplock, thingiverse, Wall Hanger, Organization, stl, kitchen_organizer
0
0.0
Feb 15, 2022
02/22
Feb 15, 2022
by
Justin Gutzman (jgutz20)
data
eye 0
favorite 0
comment 0
Sick of looking at my kids Syma Z4W Drone laying on the floor so i decided to design and print a holder. This was designed for the Z4W but there are a number of Syma drones that use this same exact controller that this will work for. I Printed this in pieces to make printing it much easier. You could place this on your slicer such that your printer does this as 1 solid object if you have a large enough print surface. But the Hooks attach with 2 M3x10mm screws and a pair of M3 bolts (12mm would...
Topics: drone_wall_hanger, thingiverse, controller, drone_wall_mount, quadrocopter_mount, Syma_Z4W,...
0
0.0
Feb 14, 2022
02/22
Feb 14, 2022
by
Oscar Navarro (XodrateP)
data
eye 0
favorite 0
comment 0
Simple coat rack with a screw, and plug to change the color. In addition, the fixing screw is hidden with the plug. ---------------------------------------------------------------------------------------------------------------------- Perchero sencillo con un tornillo, y tapón para poder cambiar el color. Ademas el tornillo de fijación queda oculto con el tapón.
Topics: Household, thingiverse, hook, wall_mount, clothing, hanger, Wall_Hanger, rack, gancho, wall_hook,...
0
0.0
Feb 14, 2022
02/22
Feb 14, 2022
by
Judah Chang (jude_the_dude)
data
eye 0
favorite 0
comment 0
A holder for most regular ukeleles. i just used a command strip to hold it and its been good so far. i was trying to go for an easy print this time. this can also probably be scaled up to hold a guitar if you want. i havn't tried this yet so you can see for yourself.
Topics: Music, thingiverse, holder, wall_mount, ukelele, music, Wall_Hanger, guitar, stl, shelf
0
0.0
Feb 14, 2022
02/22
Feb 14, 2022
by
AH Hall (only1jellybeanz)
data
eye 0
favorite 0
comment 0
I created this after needing a hollowed out support for my Halo Energy sword. I really like the original and wanted to keep the same theme of mounts in my room. Printed with no supports.
Topics: thingiverse, halo_sword, wall_mount, display_mount, Energy_sword, display, halo_energy_sword,...
0
0.0
Feb 13, 2022
02/22
Feb 13, 2022
by
Dianna Noerskov (Dimanodk)
data
eye 0
favorite 0
comment 0
This is a wall art button clothes hanger.
Topics: clothes_hanger, thingiverse, wall_mount, cloths, hanger, Wall_Hanger, button, stl, Decor
0
0.0
Feb 13, 2022
02/22
Feb 13, 2022
by
Seth Tenembaum (seth10)
data
eye 0
favorite 0
comment 0
I designed this model to help me store my soft pad for playing Dance Dance Revolution. I used a French cleat design so it's easy to take it off the wall when I need it and quick to put it back. There's a hook below the main cleat to hold the cable so it's hidden behind the dance pad and doesn't hang to the floor. The wedge on the wall plate is wider than that on the dance pad plate so you don't have to line up anything exactly—you can just throw it on the wall. All functional edges are...
Topics: dancedance_revolution, thingiverse, DDR, french_cleat, wall_mount, wall_mounted,...
0
0.0
Feb 12, 2022
02/22
Feb 12, 2022
by
Seth Tenembaum (seth10)
data
eye 0
favorite 0
comment 0
I designed this model to help me store my soft pad for playing Dance Dance Revolution. I used a French cleat design so it's easy to take it off the wall when I need it and quick to put it back. There's a hook below the main cleat to hold the cable so it's hidden behind the dance pad and doesn't hang to the floor. The wedge on the wall plate is wider than that on the dance pad plate so you don't have to line up anything exactly—you can just throw it on the wall. All functional edges are...
Topics: dancedance_revolution, thingiverse, DDR, french_cleat, wall_mount, wall_mounted, Wall_Hanger,...
0
0.0
Feb 12, 2022
02/22
Feb 12, 2022
by
James Cayer (CaptainJC)
data
eye 0
favorite 0
comment 0
Couldn't find a good solution to mount my DeWalt 20V Oscillating tool on the wall of my workbench, so I created this simple hanger. (Quick/crude design in Tinkercad to get the job done)
Topics: thingiverse, wall_mount, Hand Tools, oscillating_tool, Wall_Hanger, Oscillating, stl, dewalt
0
0.0
Feb 12, 2022
02/22
Feb 12, 2022
by
James Cayer (CaptainJC)
data
eye 0
favorite 0
comment 0
Created a simple wall mount for my DeWalt 20v reciprocating saw, may fit others.
Topics: thingiverse, wall_mount, 20v, reciprocating_saw, Wall_Hanger, Tools, stl, dewalt
0
0.0
Feb 11, 2022
02/22
Feb 11, 2022
by
Brandon MacGregor (captainroxors)
data
eye 0
favorite 0
comment 0
A dual hanger for Loungefly backpack and headband pairs with a decorative Mickey head just for fun. The protrusions on the back are meant to mimic size and shape of 16 penny nails (or 3" common nails). The idea is you hammer an actual nail at a 20-degree angle into the drywall to make the holes (the centers are 10mm apart), then insert the hook into those holes. Note: when you slice it, I would advise you turn the pointy bits upward, lest the supports be an absolute chore to remove. (See...
Topics: thingiverse, Loungefly, Wall_Hanger, Organization, stl
1
1.0
Feb 10, 2022
02/22
Feb 10, 2022
by
ethan hoffman (3dcustomsCLT)
data
eye 1
favorite 0
comment 0
hanger for door
Topics: Household, thingiverse, coat hanger, Wall_Hanger, stl
1
1.0
Feb 9, 2022
02/22
Feb 9, 2022
by
David Brodrick (Brodo78)
data
eye 1
favorite 0
comment 0
Wall hanger for Makita circular saw. Works with DSS611, maybe others, post a comment and let us know.
Topics: thingiverse, holder, Circular_Saw, Makita, wall_mount, mount, hanger, Wall_Hanger, Tool Holders...
1
1.0
Feb 9, 2022
02/22
Feb 9, 2022
by
Andrew Bannister (BannMakes)
data
eye 1
favorite 0
comment 0
I saw a version of these online and fancied having a go at modelling them. What do you think? They hang on a screw in a keyhole on the back.
Topics: thingiverse, hook, wall_mounted, coat_hook, hanger, coat_hanger, Wall_Hanger, wall_hook, stl, Decor
1
1.0
Feb 9, 2022
02/22
Feb 9, 2022
by
Benno Kempf (Misterdevilcap)
data
eye 1
favorite 0
comment 0
So da die Aufkleber nie richtig gehalten haben. Habe ich mich entschlossen es zu drucken. Jetzt haben die Kids neue Deco und die hält auch sicher. : )
Topics: thingiverse, 3D Printing, Wall_Hanger, stl, decorative
1
1.0
Feb 6, 2022
02/22
Feb 6, 2022
by
Ethan Davis (DavisCustomDesigns)
data
eye 1
favorite 0
comment 0
! I have not printed this I will update when done ! This rod mount is designed around my Shimano Zellous Rods. The hooks measure 18mm towards the butt and 10 mm towards the middle of the rod. this is designed to use drywall screws and ankers that are 4 to 5 mm in diameter and a countersunk head. Pictures and additional info will be added soon
Topics: organization, thingiverse, fishing_rod_holder, wall_mount, wall_mounted, Wall_Hanger, stl, Sport...
1
1.0
Feb 6, 2022
02/22
Feb 6, 2022
by
david sss (varauder)
data
eye 1
favorite 0
comment 0
collection of wall hooks with different designs. at the moment only the elephant head. enjoy.
Topics: Household, thingiverse, hook, head, hanger, Wall_Hanger, elephant, elephants, wall_hook, stl
1
1.0
Feb 6, 2022
02/22
Feb 6, 2022
by
Emanuele Conigliaro (compy_ing)
data
eye 1
favorite 0
comment 0
Hi, this is a easy to print wall mount for tablet I hope you enjoy
Topics: tablet_stand, Household, thingiverse, universal_mount, wall_mount, tablet, wall, mount,...
1
1.0
Feb 3, 2022
02/22
Feb 3, 2022
by
Paul Botwid (oldflattop)
data
eye 1
favorite 0
comment 0
Simple hanger with two pegs that fit perfectly into the holes of a skateboard. Designed for to be almost invisible for photoshoots but just as good for hanging at home with only one hole in the wall. Print in black for a more subtle look. Don't go over 205 degrees with the PLA or you will probably have stringing issues. (this thing is almost a stringing stress test).
Topics: wall hanger, hook, photoshoot, thingiverse, hanger, Skateboard, stl, Decor
1
1.0
Jan 31, 2022
01/22
Jan 31, 2022
by
Anders Burström (Burre666)
data
eye 1
favorite 0
comment 0
A wall hanger for jeti transmitter DC 2 . the model that has square antenna. Fly Crash Repeat!!
Topics: thingiverse, jeti, Jeti_Duplex, dc-12, dc-16, rc_transmitter, Wall_Hanger, R/C Vehicles, stl, dc-24
1
1.0
Jan 31, 2022
01/22
Jan 31, 2022
by
someone someone (PSomeone)
data
eye 1
favorite 0
comment 0
Fluke T6-1000, Wall Mount, Belt Clip, Bench leg Fluke, T6-1000, Hanging hook.STL - Can Be Screwed to the wall for an Easy access and secure place to store it. or add a Velcro tie to hang on location. Clip and leg are available too. Fluke, T6-1000, Hanging hook wall.STL - Is designed to mount of Cubicle style wall in the t-slot track Leg & Clip only work on the Hanging Hook Version
Topics: belt_clip, thingiverse, T6_1000, fluke_multimeter, wall_mount, Support_Leg, Tools, Wall_Hanger,...
1
1.0
Jan 30, 2022
01/22
Jan 30, 2022
by
Daniel Vogel (Moorhuhn)
data
eye 1
favorite 0
comment 0
Cable hanger ,Kabel halterung 8 or 5 stk
Topics: thingiverse, kabelhalter, cable_management, Lochwand, usb, Electronics, wand, USB_Holder, halter,...
1
1.0
Jan 30, 2022
01/22
Jan 30, 2022
by
Tószegi Máté (Matqux)
data
eye 1
favorite 0
comment 0
The perfect wall hanger for Audio-Technica heapdhones. The other model can be remixed for any other brands as well or you can print it without logos. For the brushed finish, I've sanded the top layer with P180 sandpaper.
Topics: Audio, audiophile, audio, thingiverse, holder, stand, headphone_holder, headphone_hanger,...
1
1.0
Jan 29, 2022
01/22
Jan 29, 2022
by
damien Pougheon (Beathedrummer)
data
eye 1
favorite 0
comment 0
Simple Wall hanger for large airplanes / sailplanes (up to 3 meters) 2 arms versions 10 or 5mm wide Infill between 5 to 10 % printed with a large brim to avoid warping assemble with CA
Topics: thingiverse, rcplane, Wall_Hanger, R/C Vehicles, stl
1
1.0
Jan 29, 2022
01/22
Jan 29, 2022
by
Oliver Staša (oliverstasa)
data
eye 1
favorite 0
comment 0
Mount for headphones Width: 100mm Height: 61mm Width of headphones support: 37mm Height of headphones rim: 25mm
Topics: thingiverse, holder, headphone_holder, wall_mount, Wall_Hanger, Organization, stl, headphones
1
1.0
Jan 28, 2022
01/22
Jan 28, 2022
by
Rich Annino (lhv32)
data
eye 1
favorite 0
comment 0
This is a series of wall hangers that I designed to display collector disc golf discs. I made them using high end Stratasys equipment, so I'm honestly not sure how they would print on anything else (especially with non-soluble support), but good luck!
Topics: collector, thingiverse, stand, wall_mount, disc, display, wall, golf, hanger, Wall_Hanger, stl,...
1
1.0
Jan 26, 2022
01/22
Jan 26, 2022
by
Will Bowen (GNuggs)
data
eye 1
favorite 0
comment 0
A wall mounted bracket that will support most 50ft standard garden hoses. Mounting holes will accommodate 0.250" fasteners. Recommended to have a washer underneath the fastener head to help prevent crushing of the print infill. Dimensions: - 2.00" w - 6.00" d - 7.50" h With my Ender3 Pro and standard print settings turned on the approximate print time was 12 hours.
Topics: thingiverse, garage, bracket, garden_hose, wall_mount, garden, Garage_organization, Wall_Hanger,...
1
1.0
Jan 26, 2022
01/22
Jan 26, 2022
by
Joseph Elizondo (RoamieTheHomie)
data
eye 1
favorite 0
comment 0
Needed something to hold the backdrop I ordered from amazon so I made one. Could be used for other applications I imagine hope someone find this useful!
Topics: thingiverse, wall_mount, Gadgets, Wall_Hanger, cclamp, backdrop, wall_hook, stl, c_clamp
1
1.0
Jan 24, 2022
01/22
Jan 24, 2022
by
Merghani Osman (Merg1234)
data
eye 1
favorite 0
comment 0
Remixed running medal hanger split in two so you can fit on a small bed. Also added a second male runner on the right side. Will post photos after printing.
Topics: thingiverse, running, Medalion, hanger, Wall_Hanger, stl, Medal, Sport & Outdoors
1
1.0
Jan 23, 2022
01/22
Jan 23, 2022
by
Takumi Itsumono (itsumonotakumi)
data
eye 1
favorite 0
comment 0
This is a wall wide hook that can be attached with a stapler. We can use this for hanging a cloth hanger. I am inspired by below: https://www.thingiverse.com/thing:4873529 And the follow data is narrow hook version. Please also see this. https://www.thingiverse.com/thing:5209713
Topics: Household, hook, thingiverse, wall hooks, clothes, Wall_Hanger, stapler, wall_hook, stl, hooks
1
1.0
Jan 22, 2022
01/22
Jan 22, 2022
by
L P (OnionsHaveLayers)
data
eye 1
favorite 0
comment 0
Simple, quick, and stylish wall mount for a headset. Should fit any overhead headphones(set). No supports required. Could use a brim/raft depending on how well your adhesion is, I didn't need a brim/raft.
Topics: thingiverse, earphones, headphone_holder, headphone_hanger, wall_mount, 3D Printing, earphone,...
1
1.0
Jan 22, 2022
01/22
Jan 22, 2022
by
Christopher Bigelow (uhbigelow)
data
eye 1
favorite 0
comment 0
These are for hanging objects from the wall with adhesive or double sided tape
Topics: adhesive, thingiverse, hanger, Wall_Hanger, stl, Decor, double_sided_tape
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Przemek Kuchta (emas1)
data
eye 1
favorite 0
comment 0
If you will print it in lay-down on the back position - use supports for sides.
Topics: switch, box, thingiverse, nintendo, games, hanger, boxes_hanger, nintendo_switch, Wall_Hanger,...
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Nick Ramsey (maker1218)
data
eye 1
favorite 0
comment 0
A simple wall hook to hang things from.
Topics: Household, thingiverse, wall_mount, Wall_Hanger, wall_hook, stl
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Lauris Pumpurs (Lau_ris)
data
eye 1
favorite 0
comment 0
Useful tool when walking with 2 crutches and need to stop for a while for some business where hands are needed. (I put mine in bathroom) There always gonna be struggle that crutches are sliding away so by using this little hangar I can place them away for a while and do all I need with both of my hands. Can be mounted on wall with three 3.8X20mm screws More info here: https://www.prusaprinters.org/prints/120987-crutches-holder
Topics: thingiverse, wallholder, holder, hanger, wallmount, Wall_Hanger, Tool Holders & Boxes, stl
1
1.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Przemek Kuchta (emas1)
data
eye 1
favorite 0
comment 0
If you will print it in lay-down on the back position - use supports for sides.
Topics: switch, box, thingiverse, nintendo, games, hanger, boxes_hanger, nintendo_switch, Wall_Hanger,...
