3
3.0
May 1, 2021
05/21
by
sdf ggt (dhilipp)
data
eye 3
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M4 screw is required. Print with exclusive sclicing in cura!
Topics: stl, bike_light_mount, bike, bike_light, Bike_mount, thingiverse, Gadgets
2
2.0
Jun 11, 2021
06/21
by
Åge Sølvberg (soelvberg)
data
eye 2
favorite 0
comment 0
Minimalistic bike wall mount. A nice way to organize your bikes without having a big and clumsy bike rack. Works on both front and back wheel. I have added different sizes. You should measure the diameter/width of the wheel and choose the closest fit. I can possibly add other dimensions as well. So let me know what works or doesn't work for you. I could possibly also add a parametric version where you can adjust the height, the diameter of the wheel, the size of the screw holes and the opening...
Topics: Organization, bike, bike_holder, thingiverse, wall_mount, Bike_mount, bike_rack, bike_stand, mount,...
3
3.0
Apr 20, 2021
04/21
by
Nathan Verdonk (nverdonk)
data
eye 3
favorite 0
comment 0
A new bike lock holder for a flat tube frame.
Topics: thingiverse, bike_lock_holder, bike_lock, stl, mountainbike, 3D Printing, Bike_mount,...
7
7.0
Jan 19, 2021
01/21
by
Christopher Herbert (herbsco)
data
eye 7
favorite 0
comment 0
This is a bike frame lock for the Club Bike lock, which is huge. Attaches to your frame with M6 bolts and nuts, I used nylon washers so it can lock into place. Fits various bike frame sizes but my tube is 30mm.
Topics: Bike, bike_lock, stl, thingiverse, Sport & Outdoors, Bike_mount, Mountain_Bike
4
4.0
Mar 15, 2021
03/21
by
Viktor Szabo (sssiiiddd)
data
eye 4
favorite 0
comment 0
After the clip had broken (which can be fixed by this: https://www.thingiverse.com/thing:1346427) my mount broke as well. This one is not as complicated as the original, on purpose... Use cable ties to attach.
Topics: bike_light_clip, thingiverse, Sport & Outdoors, CATEYE, bike_light, stl, Bike_mount,...
2
2.0
May 1, 2021
05/21
by
sdf ggt (dhilipp)
data
eye 2
favorite 0
comment 0
A M4 screw is required. Print with exclusive sclicing in cura!
Topics: stl, bike_light_mount, bike, bike_light, Bike_mount, thingiverse, Gadgets
8
8.0
Jan 12, 2021
01/21
by
Marko Härtel (DWHALE)
data
eye 8
favorite 0
comment 0
i created this thing for a backlight of my bike. I could not mount the light on the bike saddle, because i have a basket.
Topics: bike_light_mount, Mountain_Bike, thingiverse, bike, Sport & Outdoors, stl, bike_light,...
3
3.0
Mar 8, 2021
03/21
by
Simon J (siemey)
data
eye 3
favorite 0
comment 0
I purchased an excellent floor-ceiling bike rack from [these guys](https://www.cyclingdeal.com.au/buy/quality-bike-hanger-floor-rack-stand/EP-DPS02) to store a couple of road bikes. The problem was that the default hooks were suited to aluminium frames with a circular profile, rather than the larger profile of modern carbon fibre frames. I have tested the hook with > 20Kg load for several days, with no signs of stress damage or deformation. Two of these are currently supporting my
Topics: vertical_bike_rack, wall_bike_storage, stl, thingiverse, bike_rack, bike, cycling, Sport &...
2
2.0
Jun 11, 2021
06/21
by
Lucas Hohmann (lfhohmann)
data
eye 2
favorite 0
comment 0
I 3D printed in Nylon, but it became too soft and doesn't hold very well, maybe other materials or a thicker wall will solve this issue.
Topics: bike, bike_wall_hook, Sport & Outdoors, thingiverse, bike_support, road_bike, road_bike_mount,...
2
2.0
Mar 26, 2021
03/21
by
Steve LOWE (flowbie)
data
eye 2
favorite 0
comment 0
The SolarStorm X2 attaches to the bike using a thick rubber band but the clamp can only fit up to 31.8 bars. This adapter let you use the same band but will fit the newer standard 35mm bar diameter.
Topics: stl, bicycle, mountainbike, Mountain_Bike, thingiverse, Sport & Outdoors, bike,...
10
10.0
Mar 9, 2021
03/21
by
Vasco Mota (vmtdm)
data
eye 10
favorite 0
comment 0
Tools bike mount
Topics: stl, thingiverse, Mountain_Bike, Tools, bike, Bike_tools
2
2.0
Jun 10, 2021
06/21
by
Kennnnman . (Snazer)
data
eye 2
favorite 0
comment 0
For bike stands that support bikes via the rear skewers. A placement holder to prop your bike frame on while you service & wash your rear wheelset.
Topics: bike, Other, thingiverse, road_bike, bike_stand, stl
3
3.0
Apr 16, 2021
04/21
by
Antoine S (AntoSss)
data
eye 3
favorite 0
comment 0
Use with your rear quick release skewer Practical thing for bike maintenance or transport Updated : v1 can move when the quick release skewer is in place, length 80mm (on picture 1 and 2) v2 is static when the quick release skewer is in place, easier to print and allow to keep the spacing preventing the crushing of the frame, no need support, length 130mm v3 = v2 with less material (on picture 3 and 4) Comment if one size does not fit with your bike or quick release A kinematic model could...
Topics: bike, bike_tool, bicycle, thingiverse, stl, Bike_tools, chain, tool, Sport & Outdoors,...
2
2.0
May 21, 2021
05/21
by
Taylor Vaughan (HeyYoTay)
data
eye 2
favorite 0
comment 0
Made for my brothers birthday. This is a knurled bicycle handlebar grip that I made in Solidworks. Please feel free to give me any feedback and/or suggestions for any changes or customization (custom text/patterns if wanted!). Soon to post more, including inner sleeve (+ taper) and lock rings. Still new to Thingiverse :) 27.5mm ID, 30mm OD Softer materials like TPU tend to work better for applications like this. Print flat side down.
Topics: bicycle, bicycle_grips, Bike_grip, Sport & Outdoors, grips, thingiverse, bike_handle,...
Bicycle rack and bicycles in DC.
Topics: bike, bikes, bicycles, bike rack
2
2.0
Jun 11, 2021
06/21
by
Åge Sølvberg (soelvberg)
data
eye 2
favorite 0
comment 0
Minimalistic bike wall mount. A nice way to organize your bikes without having a big and clumsy bike rack. Works on both front and back wheel. I have added different sizes. You should measure the diameter/width of the wheel and choose the closest fit. I can possibly add other dimensions as well. So let me know what works or doesn't work for you. I could possibly also add a parametric version where you can adjust the height, the diameter of the wheel, the size of the screw holes and the opening...
Topics: Organization, bike, mtb, holder, bike_holder, thingiverse, Bike_mount, bike_stand, mount, stl
3
3.0
Jun 10, 2021
06/21
by
Rafa Molck (rmolck)
data
eye 3
favorite 0
comment 0
Soporte para luz de bici - WORK IN PROGRESS He diseñado este soporte para mi luz favorita de aliexpress. Incluye la parte de la hembra que se puede integrar con el enganche de otra luz y aprovechar así el mismo para varios modelos. En el archivo .scad se puede cambiar fácilmente el diámetro de la barra donde fijarlo y las opciones que cada uno quiera. Es mi primer diseño y lo iré modificando y actualizando conforme lo use. Recomiendo imprimir la parte del enganche en la posición que las...
Topics: bike_light_mount, bike, bike_light, thingiverse, Replacement Parts, Bike_mount, stl
3
3.0
Mar 25, 2021
03/21
by
(Aussie_ben)
data
eye 3
favorite 0
comment 0
Fits inside the bottom of a bike fork and allows it to be used for storage. I liked the idea of a fork cork but not really available here in Australia, and couldn't find one suitable for a 25mm(1 inch) inside diameter tube. i used with a length of 40mm pvc clear hose with 24mm outside diameter and 19 inside diameter, also requires a m8 50mm coach bolt and wing nut for tool less operation. Links to other parts used...
Topics: stl, Bike_MTB, thingiverse, Sport & Outdoors, mtb, bike_tool, bike, Bike_mount
6
6.0
Jan 19, 2021
01/21
by
yousef elkady (fovarat)
data
eye 6
favorite 0
comment 0
i have designed this serfas computer bike mount after i have give up from searching and i have printed it and works great for me it will help to easily see ur bike computer while riding ur bike with its unique bike mount it is easily mounted and removed easy to adjust Note: for the computer mount , holder and spacer u can tide them together by zip ties or super glue but i recommend to use super glue Extra stuff You will need: 2x6mx5.5cm bolts 2x6m nuts Update : 7/18/2018 Note: for the arm...
Topics: mountainbike, bike mount, serfas, bike_holder, computer bike holder, thingiverse, Sport &...
2
2.0
Jan 5, 2021
01/21
by
Voltioman 13 (voltioman)
data
eye 2
favorite 0
comment 0
Esta es una solucion para guardar la bicicleta en la pared. Hay dos modelos para poner la bici en horiontal con soporte plano y soporte curvo para la rueda. Hay dos modelos de gancho para el pedal para que puedas imprimir el que mejor se adapte a tu pedal. Tambien hay dos modelos para poner la bici en vertical.
Topics: stl, bike_hanger, Wall_Hanger, bike, wall_bike_storage, Mountain_Bike, bike_rack, bike_wall_hook,...
6
6.0
Jan 16, 2021
01/21
by
Sterling Acree (getout)
data
eye 6
favorite 0
comment 0
I needed a couple bike hooks with larger space to put the tire in. These work on my 27.5" mountain bikes. Mine's a little tight putting it in as the tires are a bit wider than normal, but it still fits. It's designed to be mounted directly on the surface the tire will be resting on. I had to add some wood below to keep the correct angle since I mounted these on a 2x4 attached to the wall. Included are STLs for both left and right entry....though I realize you can just flip these in your...
Topics: mountainbike, bikes, bike_hook, mtb, bike wall hook, thingiverse, Sport & Outdoors, bike,...
Forme E bike manual
Topic: bike
4
4.0
Jun 21, 2021
06/21
by
Gert Pellin (switch87)
data
eye 4
favorite 0
comment 0
mount for the Prinston Tec Yukon front-lights. These are mostly bought as helmet lights. If you need a clamp to attach it to your bike, see here: https://www.thingiverse.com/thing:3350991
Topics: bike, GoPro_Mount, Sport & Outdoors, road_bike, thingiverse, Bike_mount, Mountain_Bike,...
0
0.0
Apr 19, 2022
04/22
by
Steven Tauriello (steventauriello)
data
eye 0
favorite 0
comment 0
There are four files the original file is if you want to modify the mount to your desired parameters, wall thickness, hole placement, etc. etc. the second file is already rendered, hollowed, and holes punched and is ready to go the third and fourth files are the separate components by themselves. I designed this wall mount to fit all the bikes in my home from small to big so it should fit most size tires for everyone out there. It was designed more around mountain bike tires so road bikes may...
Topics: universal bike mount, thingiverse, bike mount, vertical bike mount, Other, stl, bike wall mount,...
5
5.0
Apr 19, 2021
04/21
by
(LittleDangerous)
data
eye 5
favorite 0
comment 0
I designed this after not finding any bike mounts for the belt clip, only the bracelet attachment. There are 4 different models to choose from, depending on the diameter of your handlebars and if you want to put rubber/foam tape between the mount and bars to keep it from slipping. The 22.2mmm will fit mountain bikes and most other bikes. The 23.8mm will fit road bikes. The foam versions are a few mm larger to accommodate the shim material. After printing the 2 halves will need to be glued...
Topics: thingiverse, stl, pokemongo, road_bike, PokemonGo_plus, Bike_mount, Mountain_Bike, Sport &...
3
3.0
Mar 15, 2021
03/21
by
Marlon Weber (MRLNWBR)
data
eye 3
favorite 0
comment 0
Tool to remove the springs from bike forks. In my case a marzocchi dirtjam comp.
Topics: marzocchi, thingiverse, bike_fork, Tools, workshop, Bike_tools, fork, stl, mountainbike, bike,...
7
7.0
Jan 19, 2021
01/21
by
Seth (nightfox7)
data
eye 7
favorite 0
comment 0
I wanted a solution to mount my bike on my apartment wall. I had seen hangers in the past that utilized the pedal to secure the bike to the wall, and liked the idea since it would lend itself to being a printed part, vs the large bike mounts I have seen. I also wanted it to be very easy to use on a daily basis. This is what I came up with, and after using it for a while, I really like it. with the bike being fairly high up on the wall, it keeps it out of the way so I can still utilize the space...
Topics: Wall mount, Pedal_mount, wall hanger, thingiverse, road bike, Bike rack, bike, bike hanger,...
2
2.0
Oct 15, 2021
10/21
by
Wende LIU (wendesix)
data
eye 2
favorite 0
comment 0
need an M5*40 screw to lock the steer tube（28.6mm） it's ok to cut carbon tubes, never try on aluminum tubes. free to modify if you want
Topics: thingiverse, stl, Bike_MTB, bike, Sport & Outdoors, Mountain_Bike
2
2.0
Mar 13, 2021
03/21
by
someone someone (PSomeone)
data
eye 2
favorite 0
comment 0
BIKE, PEDAL WALL MOUNT-RACK, ANGLED MOUNT Easy to use, gets bike closer to wall for hallways or near cars Supports bike by wheels and pedals, easy setup with 2 people. place wheel chocks on wall at desired height, Screw into stud or use anchors (not sure how to do this You tube or ask someone it's not hard, but do it right or it's possible they will come out) have one person hold bike up in place rotate crank into vertical position (pedal up) place pedal clip in place and screw or mark...
Topics: road_bike, Triathlon_Bike, thingiverse, Bike_mount, BIKE, Wall_Hanger, Sport & Outdoors,...
4
4.0
Jun 21, 2021
06/21
by
Gert Pellin (switch87)
data
eye 4
favorite 0
comment 0
This mount makes use of the original moon parts or you can print the parts yourself. from https://www.thingiverse.com/thing:3342843 you will need following parts: * lock-spring.stl or lock-spring-original.stl * slide-lid.stl Compatible lights ------------------------ This mount is compatible with: • Moon Meteor • Moon Meteor-X Auto • Moon Meteor-X Auto Pro • Moon Meteor Storm Pro • Moon Meteor Storm • Moon Meteor Storm Lite • Moon X-POWER 2500 • Moon X-POWER 1800 • Moon...
Topics: bike, GoPro_Mount, Sport & Outdoors, road_bike, thingiverse, Bike_mount, Mountain_Bike, stl,...
3
3.0
Mar 8, 2021
03/21
by
Chris Yura (10kman)
data
eye 3
favorite 0
comment 0
If you run Look Keo pedals with black (zero degree float) cleats, these wedges act as a placeholder for you when replacing. Lay them flat on the sole of your shoe BEHIND the cleat (the heal side), push into the cleat until there's no wiggle, tape it down, unscrew the cleat, place new one on shoe lined up with the wedge, and tighten cleat back down. Clean the cleat/shoe area of course so there's a tight fit between the cleat and wedge. I still trace the cleat but these are working much better...
Topics: pedals, stl, bike_pedals, thingiverse, look_keo, bike_cleat, bike, Sport & Outdoors, road_bike
5
5.0
Apr 12, 2021
04/21
by
Caitlyn Byrne (Sienna)
data
eye 5
favorite 0
comment 0
The frame holder that came with my Bell pump was a piece of crap, and broke the first time the bike crashed. So I made a better one. Fits the telescoping frame pump you can find at places like Walmart.
Topics: thingiverse, bike, stl, Sport & Outdoors, bike_frame, bike_pump, pump
6
6.0
Mar 2, 2021
03/21
by
John Mulac (3DPRINTINGWORLD)
data
eye 6
favorite 0
comment 0
Wall Mounted Bike Stand This stand is designed to fit both 700mm x 20mm road bike tires and 26-29" x 2.3" mountain bike tires. It mounts to the wall with two #10 flat head screws. I printed it out of ABS so that have a little flex and strength but I would think petg would work as well.
Topics: Bike rack, thingiverse, stl, Bike Stand, Sport & Outdoors, bike mount
2
2.0
Apr 21, 2021
04/21
by
Yevhen Olsh (fofrejin)
data
eye 2
favorite 0
comment 0
Bicycle chain guard for the crankset. Mounts on 5 screws (radius 75mm).
Topics: thingiverse, stl, Bike_Parts, Other, bike, 3d_printed_bike_parts
4
4.0
Apr 20, 2021
04/21
by
Danilo Lacoste (dalacost)
data
eye 4
favorite 0
comment 0
a bike stand built with just one tube of 19mm (stainless steel). for this version you can use only 4 screw with nuts (3mm). for attach the top supports. base no need screws, you can use some super glue but is not necessary. finally i use some floor protector under the base. (just in case). print with 40% fill. Materials ======== - 1.2metres tube of 19mm (normally used for bathrooms) and get 3 parts (60cm, 30cm, 30cm) - 4 screws with nuts of 3mm
Topics: thingiverse, bike_stand, stl, bike, Bike_mount, Sport & Outdoors
2
2.0
May 1, 2021
05/21
by
Loquet Raoul (Raoul_Maker_E-nable_France)
data
eye 2
favorite 0
comment 0
Bike clug WIP, customize it with your bike tire diameter.screw holes 3mm
Topics: stl, bike, bike_rack, clug, Bike_mount, thingiverse, Other
3
3.0
Mar 10, 2021
03/21
by
Sean Hughes (mclarin89)
data
eye 3
favorite 0
comment 0
I needed to make the rear wheel holder taller so the tire sits above the wing on my car. This fits my rockbros bike rack. Should also fit seasucker, please leave a comment if it works for your seasucker rack. This makes the rear tire holder 88mm taller. 4 m5x100 screws required.
Topics: bike_carrier, mtb, stl, thingiverse, bicycle, Mountain_Bike, bike_rack, bike, Sport & Outdoors
1
1.0
Aug 22, 2021
08/21
by
Trevor Mayowski (brigal)
data
eye 1
favorite 0
comment 0
Remixed the bike hanger as my print bed is a lot smaller, still this pushes it to the max but you can resize it a bit if needed. Had to do a few iterations, most of the weight is taken up by the wire holder so I beefed it up. Only had the bikes fall twice with my first attempts when it broke spectacularly. :) Also, instead of wire I use paracord as I had a ton around and its very strong. The middle pieces on the arm can be excluded to make a smaller hoop for the bike tire as shown with my...
Topics: Bike, Organization, bike_hanger, wall_bike_storage, Mountain_Bike, Garage_organization, stl,...
9
9.0
Jan 5, 2021
01/21
by
FLIPPIN 3D (FLIPPIN-3D)
data
eye 9
favorite 0
comment 0
this I made for my granddad to rase his bikeing shoe
Topics: Parts, shoe, stl, Mountain_Bike, shoes, Bike_mount, thingiverse, bike
6
6.0
Jan 17, 2021
01/21
by
Ryan Cerepak (Cerps)
data
eye 6
favorite 0
comment 0
GoPro Mount for a BT40 clone light. I specifically use this with the one sold by Shark Audio on the 'Zon. You may need a longer screw to attach this to your light.
Topics: stl, gopro_bike_mount, thingiverse, bike, Other, Bike_mount, GoPro
2
2.0
Apr 8, 2021
04/21
by
Jimmy Hartanto (Aistaca)
data
eye 2
favorite 0
comment 0
This is a standard bike torch/ light holder designed by me. The model is designed to fit the standard 24mm bike torch and installed on the bike handlebar using cable ties. I printed mine using ABS and the flexibility of this model has been adjusted to fit the material. I expect it will be more brittle if you print it using PLA, however it is not wrong to try it :) There is slot for putting rubber (the circle slot underneath) for more grip on your handle bar. I put mine without rubber and it...
Topics: bike_light, stl, Sport & Outdoors, thingiverse, bike, bike_torch
3
3.0
Mar 22, 2021
03/21
by
Chris Keeter (Enginseer_K)
data
eye 3
favorite 0
comment 0
Made a simple edit in TinkerCAD to fill the hole where the plug goes in the original top. Also removes the need to print the plug.
Topics: stl, Bike_mount, bike, Sport & Outdoors, thingiverse, Mountain_Bike
8
8.0
Apr 26, 2021
04/21
by
Adam Williams (adamw4)
data
eye 8
favorite 0
comment 0
As a Father's Day gift for my bicycle riding dad, I made him a custom designed container to hold a half-flat of strawberries (or whatever else he wants to bring home). It uses a 3D printed adapter pieces to slide into the bike rack behind the rear wheel, and connect to whatever container you want with 1/4" bolts and lock nuts. A carabineer keeps the container from sliding back out the rack. I used a Sterilite 4 Gallon Stacker Tote in my example, but nearly any container can be bolted to...
Topics: Bike_mount, Bike_rack, thingiverse, Bike, stl, Sport & Outdoors
8
8.0
Jan 18, 2021
01/21
by
KEVIN BROADSTREET (kbroadst)
data
eye 8
favorite 0
comment 0
Just a modest modification to simplify the wall base and to add some additional preset holes for mounting and stability. Also added some gussets on the actual pedal hook to reinforce Great work from the folks that have created this! UPDATE: Probably best to rotate the design 90 degrees along the Y-axis (sideways from the file disposition) and print sideways with supports.
Topics: bike_wall_hook, stl, thingiverse, bike, DIY, Bike_mount
3
3.0
Jan 19, 2021
01/21
by
Chris Fisher (Fishman73)
data
eye 3
favorite 0
comment 0
I have a mountain bike and a road bike. I have a great pump I purchased about 25 years ago. It is a pain to change the pump mount from one bike to the other when I switch bikes. I created this bike pump mount and clip, to mount the pump on the second bike. The pump clicks into place and is held very firmly. The clip is just extra insurance it does not come off on the road. I need to get better velcro for the clip. I am using a wire tie velco strip and it is too small, and not double ended....
Topics: road_bike, tire_pump, stl, thingiverse, Sport & Outdoors, bike, Bike_mount, Mountain_Bike
9
9.0
Apr 21, 2021
04/21
by
Rob Meyer (RobMeyer)
data
eye 9
favorite 0
comment 0
I needed an adaptor plate to mount my tail light to the license-plate-region of my Topeak bike rack. This style of tail light seems pretty common, so I hope this helps someone else out. Update -------- After using this for a couple days on the trail, my light did pop out once after a jostling bump. I've temporarily fixed this with a hack -- wrapping a rubber band or hair elastic around it to keep it held down. When I get some more time, I'll be adding a mechanism to help keep it clipped or...
Topics: thingiverse, stl, customizer, bike_light, bike_rack, Sport & Outdoors, bike, bike_light_mount
3
3.0
Apr 20, 2021
04/21
by
above ego (APEgo)
data
eye 3
favorite 0
comment 0
this is an adapter for rack of touring bike is easy to install by cable tire 4 ea
Topics: thingiverse, stl, flashlight_adaptor, flashlight_holder, bike_light, bike_tool, bike_rack,...
4
4.0
Jun 21, 2021
06/21
by
Gert Pellin (switch87)
data
eye 4
favorite 0
comment 0
This bracket can be used in combination with my Modular Mounting System conversion to be able to mount all kinds of assessors on your bike with only one clamp on your steering bar. The bracket is based on and partly compatible with the original one delivered with Moon bike lights. The bracket has a separate mounting body (slide-body.stl) to make it possible to horizontally turn the mounted assessor. For Modular Mounting System ======================== To use it as a universal modular mounting...
Topics: handlebar_mount, thingiverse, mtb, bike_light_mount, bike, Sport & Outdoors,...
2
2.0
Mar 13, 2021
03/21
by
Michael Huynh (TriangleFabrications)
data
eye 2
favorite 0
comment 0
I work at as a bicycle mechanic in the summer. A coworker of mine bought 2 bead jacks made by BikeHand and they both broke. I printed the tire bead jack by ucancallmebob89: https://www.thingiverse.com/thing:3681099 as a replacement. So far it's been working great but I felt I should reinforce the piece that broke on the BikeHand ones, just in case. Use with the arm from the original fileset. print with many walls.
Topics: bike_tire_lever, thingiverse, Tools, bike, bicycle, stl, bike_tire
5
5.0
Jan 19, 2021
01/21
by
Rafal (rafaljot)
data
eye 5
favorite 0
comment 0
Print it using TPU, ASA or sth.
Topics: bike_light, thingiverse, Sport & Outdoors, bike, stl, bike_light_mount
