1
1.0
Dec 1, 2021
12/21
by
David Mikulik (dmikulik)
data
eye 1
favorite 0
comment 0
Cap for covering hexagon bolt head - I nead cover the silver head with the black cover This particular is for M8
Topics: bolt, bolt_cap, bolt_cover, thingiverse, stl, Household
2
2.0
Apr 24, 2021
04/21
by
Mohamed Chaara (mdchaara)
data
eye 2
favorite 0
comment 0
M8 Magic bolt/nut holder
Topics: m8_bolt, 3D Printing, bolt_holder, bolt, stl, M8_bolt_cap, thingiverse
2
2.0
Apr 23, 2021
04/21
by
Brent Olsen (3phase)
data
eye 2
favorite 0
comment 0
I needed something quick to cover the bed frame bolts that were tearing into my mattress. I whipped this guard up in Sketchup and thought someone might have an application for it. I found that heating the bolt with a lighter for a few seconds and this screwed on and stayed nicely. I used it on a 6 mm bolt and a 14 mm nut but you could scale it, drill it or melt it a bit more to fit any size. I printed it on low quality with no supports and it worked fine.
Topics: bolt, screw, thingiverse, stl, bolt_guard, Household, bolt_cover, Nut_Bolt_Cover
8
8.0
Jun 17, 2020
06/20
by
Center for Accessible Technology in Sign
movies
eye 8
favorite 0
comment 0
ASL vocabulary
Topic: bolt
6
6.0
Jun 17, 2020
06/20
by
Center for Accessible Technology in Sign
movies
eye 6
favorite 0
comment 0
ASL vocabulary
Topic: bolt
556
556
software
eye 556
favorite 0
comment 0
154
154
software
eye 154
favorite 0
comment 0
8
8.0
audio
eye 8
favorite 0
comment 0
2
2.0
Mar 13, 2021
03/21
by
Mihai Hubalau (whoobee)
data
eye 2
favorite 0
comment 0
Udoo Bolt v3/v8 case with hole for button on top and 2 holes for antennas. This model was created on TinkerCad. The project is public in case anyone needs to tinker with the original design: https://www.tinkercad.com/things/2b92OlHwpHu Thanks, Enjoy!
Topics: thingiverse, udoo, udoo case, udoo bolt v3, udoo bolt case, udoo bolt v8, stl, Electronics, bolt...
2
2.0
Apr 17, 2021
04/21
by
soono kwon (soonoman)
data
eye 2
favorite 0
comment 0
Explanation : Oval head wrench bolts were modeled by size. The length frequently used for each type of diameter of the screw was composed of a set. M3 * 6/10/15 (A/B/C), M4 * 6/10/15 (D/E/F), M5 * 10/15/20 (G/H/I), M6 * 10/15 /20(J/K/L), M8 * 10/15/20(M/N/O), M10 * 15/20/25(P/Q/R), M12 * 25/30/35(S/ T/U) You can also download this file from the link below. https://www.3dbank.or.kr/020101/id/8001/gubn/39/page/3/search_order/SEQ Many other 3Dprinting files are in the "3DSangSangPortal"....
Topics: wrench_bolt, bolt, thingiverse, stl, Parts, Oval_head_wrench_bolt
5
5.0
Jan 21, 2021
01/21
by
Florian Röben (Xander23669)
data
eye 5
favorite 0
comment 0
Simple door bolt
Topics: Simple door bolt, thingiverse, DIY, door bolt, bolt, stl, Simple
7
7.0
Jan 17, 2021
01/21
by
Chris (SmilingImpact)
data
eye 7
favorite 0
comment 0
Updated 1.19.18: added combination phillips+flat head bit. (more utility less plastic). extended hex portion of nut and bolt for easier use. This project aims to produce a perfect M6 spec bolt and nut.
Topics: m6_bolt, thingiverse, bolt, Parts, stl
6
6.0
Apr 17, 2021
04/21
by
Boris Humberg (ThinkSolutions)
data
eye 6
favorite 0
comment 0
This cap adds a protection layer to a bolt head used as a pivot or pressure point, so it can rest against another part and reduce wear or possibility for damage.
Topics: bolt, thingiverse, Parts, stl, bolt_cap
2
2.0
Jan 11, 2021
01/21
by
soono kwon (soonoman)
data
eye 2
favorite 0
comment 0
Explanation : Butterfly bolts were modeled by size. The length frequently used for each type of diameter of the screw was composed of a set. M3 * 5/10/15 (A/B/C), M4 * 6/10/15 (D/E/F), M5 * 10/15/20 (G/H/I), M6 * 10/15 /20(J/K/L), M8 * 10/15/20(M/N/O), M10 * 15/20/25(P/Q/R), M12 * 25/30/35(S/ T/U) You can also download this file from the link below. https://www.3dbank.or.kr/020101/id/8009/gubn/39/page/2/search_order/SEQ Many other 3Dprinting files are in the "3DSangSangPortal"....
Topics: thingiverse, stl, Butterfly_bolt, bolt, Parts
932
932
texts
eye 932
favorite 0
comment 0
Blaser R93
Topics: bolt, rifle, barrel, blaser, scope, calibre, forearm, assembly, warranty, slide, bolt assembly,...
6
6.0
Jan 15, 2021
01/21
by
John Barbour (SwifferKing)
data
eye 6
favorite 0
comment 0
This is a cover set I made for a floor bolt. It makes it easier for people to use and prevents the sharp edges from tearing up your shoes.
Topics: foot bolt, kick, thingiverse, kick bolt, stl, foot, bolt, Household, 852226
9
9.0
Jun 6, 2021
06/21
by
Max (maxoutny)
data
eye 9
favorite 0
comment 0
5/16" x 2.5" (8mm x 63mm) Will work with both 3mm and 1.75 mm Filament. I would recommend use this item: http://www.thingiverse.com/thing:13351 with Greg's Extruder.
Topics: hobbed bolt, Other, bolt for extruder, Hobbing, thingiverse, spam, stl, bolt
15
15
Mar 5, 2022
03/22
by
Disney Interactive Studios
movies
eye 15
favorite 0
comment 0
Japanese trailers
Topic: Disney's Bolt
Screensaver for the movie.
Topics: Screensaver, Bolt
472
472
texts
eye 472
favorite 0
comment 0
Blaser R93 Duo
Topics: bolt, rifle, barrel, calibre, assembly, warranty, safety, blaser, slides, scope, bolt assembly,...
1
1.0
Jul 25, 2021
07/21
by
Skoopsy Doopsy (Skoopsy)
data
eye 1
favorite 0
comment 0
M8 Lifting Eye Bolt from Accu. Thread Diameter: 8mm Thread Length: 13mm Eye Ring Thickness 6mm Eye O.D. = 36mm Eye I.D. = 20mm
Topics: thingiverse, eye bolt, lifting eye, 8mm, lifting bolt, eye, stl, bolt, Parts
8
8.0
Jan 18, 2021
01/21
by
Brett & Ivy Plowman (BrettandIvy2018)
data
eye 8
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/ka5oeXFzXfa
Topics: hex_bolt, Nut_and_bolt, thingiverse, 10M Bolt, bolts, 3D Printing, stl
9
9.0
Mar 21, 2021
03/21
by
Kristian Kuhn (Lord_Vader)
data
eye 9
favorite 0
comment 0
A in my opinion better bolt hobber with crank and bitadapter ;) You need: 4x 608 ZZ bearings M8 nuts and a M8x25 screw for adjusting the depth of the cut 1x M8 Tap (DIN 371 which is with a thick shaft) Some good filament and time ;)
Topics: bolt hobber, stl, hobbed, 3D Printer Accessories, hobbed bolt maker, bolt maker, hobbed bolt, tap,...
9,516
9.5K
Aug 10, 2010
08/10
by
Lightning Bolt
1
1.0
Apr 4, 2021
04/21
by
Lukas Hirschwald (Huddel)
data
eye 1
favorite 0
comment 0
Udoo Bolt Case This is a case for the Udoo Bolt that I upgraded with a Noctua NF-A6x25 PWM fan. The standard fan is extremely loud so I exchanged it and because the Noctua fan is 25 mm the case needed to be taller. You can either print all parts or, as I did, have them laser cut and only print the connectors. In the top there is a 12 mm hole for a push button. On the right side I have two holes for mounting antennas for bluetooth and wifi that came with the Intel Wi-Fi 6 AX200 . If you found...
Topics: thingiverse, udoo_bolt_v8, udoo, bolt, stl, Computer, udoo_bolt_v3, case, Udoo_case, udoo_bolt_case
0
0.0
Apr 20, 2022
04/22
by
C R (Printedgenius)
data
eye 0
favorite 0
comment 0
Bolt knob for 1/4" bolt. Pass bolt through now you have a hand adjustable bolt.
Topics: Parts, thingiverse, bolt handle, bolt knob, stl
16
16
software
eye 16
favorite 0
comment 0
2,367
2.4K
Jan 29, 2020
01/20
by
Disney Interactive Studios
software
eye 2,367
favorite 14
comment 0
DVD ISO Image of the 2008 game Disney's Bolt, if this violates copyright in anyway, then i'll take it down.
Topics: Bolt, Disney
2
2.0
Jun 10, 2021
06/21
by
Sarah Paulson (SarahPaulson)
data
eye 2
favorite 0
comment 0
Remixed from mike_mattala's NUT JOB. Used his OpenSCAD file to customize. Needed a 6mm thread outer diameter with a 1mm thread pitch for my "Comfort Zone" branded fan. It originally came with a terribly short bolt that wouldn't reach and the fan head would not stay on so here's my easy fix!
Topics: fan bolt, 6mm bolt, fan, thingiverse, bolt, 6mm, Parts, comfort zone, stl
2
2.0
Sep 14, 2021
09/21
by
(xbstrxct)
data
eye 2
favorite 0
comment 0
I made these small brackets to mount my Chevy Bolt's stock L1 EVSE to the wall. This way the electric components are not touching the ground in case there is water and also there is minimal strain on the plug. The mount consists of a left and a right bracket. All you need to do is slide one bracket into each of the "tabs" on the back of the unit. 2 brackets seem to be more than enough but you can always print 4 brackets (2 left + 2 right) if you wanted to use both sides of each tab....
Topics: stl, thingiverse, evse, bolt, bolt ev, Automotive
4
4.0
Mar 16, 2021
03/21
by
Petar Petrov (Amnez1a)
data
eye 4
favorite 0
comment 0
Small Hand Knob for a M6 Bolt. I can customize it for other sizes if someone is interested in.
Topics: bolt, thingiverse, DIY, m6_bolt, knob, stl
2
2.0
Mar 25, 2021
03/21
by
Peter Three (tinker3dmodel)
data
eye 2
favorite 0
comment 0
Hello 'thingy people'.... Just a little something that someone may find a use for... The dimensions are: 10 x 10 x 29mm If there is a need for other nuts or bolts, just leave a comment... If you like what you see and enjoyed using it, great stuff then I would enjoy a coffee with you.... (if you want to, that is?) Thank you.
Topics: stl, Other, thingiverse, T-Bolt, m6_bolt
9
9.0
Apr 26, 2021
04/21
by
Kevin (inventimark)
data
eye 9
favorite 0
comment 0
Update: Slightly resized the tension bearing holder and added a part to hold the bearing in. As well as a part to hold the pivot bearing in. (I had a problem with them staying in when testing) Update: 02-11-18 : Added the option for a 6001ZZ bearing for hobbed bolts that are 12mm. Parts needed. 4 608zz Skate bearings 6 M3x20mm bolts 2 M8 or 5/16th nuts 1 M8 or 5/16th bolt at least 25mm long Misc Washers. 1 Tap Mount bolt to be hobbed in extruder and mark position with permanent marker to get...
Topics: thingiverse, bolt, stl, 3D Printer Accessories, hobbed, hobbed_Bolt_maker, hobbed_bolt
2
2.0
Mar 26, 2021
03/21
by
Armandas (Voliukas)
data
eye 2
favorite 0
comment 0
Knob handle with cap for bolt - ISO 4017, M6.
Topics: stl, knob, thingiverse, bolt_cover, m6_bolt, bolt_cap, Parts, handle, iso_4017, DIN_933, hexagon,...
5
5.0
Jan 21, 2021
01/21
by
Trevor Donalson (Icebear11)
data
eye 5
favorite 0
comment 0
Bolt and Nut
Topics: nut, thingiverse, bolt, Parts, bolt_and_nut, stl
1
1.0
Oct 29, 2021
10/21
by
Gabor Borus (gborus)
data
eye 1
favorite 0
comment 0
I was thinking about printing threaded bolts as found two issues: 1, printing it standing will take much more time than layed down 2, if I lay it down then support will be needed, which ruins the thread 3, in standing position the layers wouldn't strengthen the structure, at bigger force the layers can easily split. So to solve these problems, I two flat surfaces to the thread so this way it can be layed down, this way it can be printed quicker and layers will give more strength to the threads.
Topics: thingiverse, Parts, thread, stl, threaded, threaded_bolt, bolt
3
3.0
Mar 21, 2021
03/21
by
cengiz tepe (ctepe)
data
eye 3
favorite 0
comment 0
I made print bolt and nut 0.3 mm thickness, ABS, nozzle 0.4 mm. Bolt teeth should be trimmed using the file.
Topics: stl, bolt, Nut_and_bolt, Machine Tools, thingiverse
3
3.0
Mar 13, 2021
03/21
by
Lucas Simon (LosSimonos)
data
eye 3
favorite 0
comment 0
This is the original Bolt Rifle from Rust
Topics: Bolt Rifle, thingiverse, Video Games, Rust, Bolt, stl
3
3.0
Mar 13, 2021
03/21
by
TJ Barr (Hopper01_68)
data
eye 3
favorite 0
comment 0
Wanted a holder for my 22 conversion bolt so it won't get dirty when not using it.
Topics: ar15, thingiverse, stl, bolt, bolt protector, 3D Printing
2
2.0
Jan 6, 2021
01/21
by
Samuel Hookway (kuffor88)
data
eye 2
favorite 0
comment 0
I drew a bolt and a nut in M6 wich is about 1/4inch. I had to modify the diam. of the bolt slightly since it didn't fit in the nut.
Topics: Parts, bolt_with_nut, m6_bolt, stl, M6_nut, nut, screw, thingiverse, bolt
3
3.0
Mar 13, 2021
03/21
by
Lol No (tyeo098)
data
eye 3
favorite 0
comment 0
WIP Took some liberty with the bracket as the real one was designed for injection molding (I'm not mocking up useless draft angles) as well as the ability to lock the false floor in the 'UP' position which I've never used. The bolts that attach the bracket to the car appear to be M6x1 (6mm dia 1mm pitch) by 20mm in length. Hex head cap 10mm socket. No idea on print settings but the OEM one is basically hollow with a few infill-like braces molded into it. The OEM one also has provisions for...
Topics: Cargo, thingiverse, Parts, Chevrolet_Bolt, stl, chevy, bolt
6
6.0
Jan 20, 2021
01/21
by
CJA (CJA3D)
data
eye 6
favorite 0
comment 0
These are simple holder's created for the BOLT board, which is based on ESP8266 with custom firmware. For more info on the project check out - https://www.boltiot.com/ To buy a BOLT check out - https://www.indiegogo.com/projects/fully-integrated-iot-platform-made-for-ml-arduino And for all kinds of projects check out the projects on Hackster.io - https://www.hackster.io/bolt/products/bolt-wifi-module Screws to use with 3D printed part - 2x56
Topics: iot, Electronics, ESP8266, thingiverse, bolt, BOLT_IoT, stl
3
3.0
Mar 8, 2021
03/21
by
Rory Mace (rorymace)
data
eye 3
favorite 0
comment 0
a good nut and bolt that works it is very smooth
Topics: nut and bolt, stl, thingiverse, nut, Parts, bolt
5
5.0
Jan 3, 2021
01/21
by
Aviad Golan (TrueOverFlow)
data
eye 5
favorite 0
comment 0
This is the first self design project!!! Designed using TinkerCad with 0.1mm precision. This part is a replacement for a broken door bolt lead, it used on a strong door to hold the internal retractable bolt in place. Big thumbs up to the maker NightRanger: https://www.thingiverse.com/NightRanger/about
Topics: stl, door, Household, Door_bolt, thingiverse, bolt_lead
1
1.0
web
eye 1
favorite 0
comment 0
Bolt Entertainment Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Bolt Entertainment Wiki, bolt_entertainmentfandomcom
9
9.0
Jan 10, 2021
01/21
by
Scott Ripley (Creon1)
data
eye 9
favorite 0
comment 0
Automated Carrier for use with Konflict 47, A mix of M_bergmann's 1:100 Universal Carrier, (http://www.thingiverse.com/thing:769137) and the IJN 25mm AA gun (http://www.thingiverse.com/thing:1005126) with a robot head from C-Series Cyclops Automated Militia (18mm scale) by dutchmogul, published Feb 26, 2016
Topics: thingiverse, stl, bolt_acttion, bolt_action, k47, Vehicles
9
9.0
Mar 10, 2021
03/21
by
Tim Deagan (tdeagan)
data
eye 9
favorite 0
comment 0
This is a customizable thumbscrew for hex bolts of various sizes. You can set the hex width (across parallels,) hex height, bolt width and the slack factor (I default to 5%, aka 1.05, use whatever prints best for you.) You can also set the number of protrusions (bumps), their size and the height of the shaft. The shaft height can be important if you need to keep the thumbscrew part standing off a particular distance from whatever the shaft is pressing against. US hex bolt size chart:...
Topics: thumbscrew, stl, thingiverse, hex bolt, Parts, bolt, customizer
VIII, 142 p. ; 24 cm
Topic: Aslak, Bolt, -1450
9
9.0
Apr 5, 2021
04/21
by
Alexander (radus)
data
eye 9
favorite 0
comment 0
http://www.youtube.com/watch?v=4OEjcpbdBe0 2 pcs - 608 bearings 2 pcs - 626 bearings 1 pcs - tap screw M6 myhb - first with 0.7 groove depth myhb1 - second with 0.9 groove depth myhb2 - third with 1.2 groove depth
Topics: thingiverse, 3D Printer Accessories, bolt, stl, hobbed_bolt, hobbed
2
2.0
Apr 28, 2021
04/21
by
Rainer Fuchs (fuchsr)
data
eye 2
favorite 0
comment 0
Simple remix of [WillLyon's sizing jig](https://www.thingiverse.com/thing:3752429). Instead of embossing numbers and tick marks, I raised them. This way you can use filament change to give them a different color. I also include an STL file that combines imperial and metric into one jig.
Topics: bolt sizer, thingiverse, Tools, bolt, stl, screw, screw sizer
