7
7.0
Jan 14, 2021
01/21
by
Evan Choi (Aznevanchoi)
data
eye 7
favorite 0
comment 0
A way better Clamp Version for any cube auto level sensor for the E3D carriage made by toosha. Thxs to him. I just got sick and tired printing all the different versions of clamps (like the v6e, v6f, v6h and v6j) just to see which clamp works best for me, also it was kinda painful just to adjust the height of the sensor, so I came up with the ultimate version....I call it Clamp V6Z lol The sensor is attached to this clamp with two M3 bolts and 2 M3 nuts, making it super easier to adjust the...
Topics: thingiverse, stl, anet_a8_parts, E3d_bowden, 3D Printer Parts, bowden_clamp, Anet_A8, bowden,...
6
6.0
Jan 18, 2021
01/21
by
Aleks Bozovic (AleksBozovic)
data
eye 6
favorite 0
comment 0
This is very loosely a remix. I really liked Tech2C's nozzle and fan mounting method. But the carriage was for a Prusa with zip-tied bearings – not really my jam. So I redesigned the whole thing and made it for the M3 screws and nuts that ship with the Anet (assuming you have some left over, the 19mm long ones, at the least). The back of this thing is made to exactly match the original plate carriage. Except instead of the tapped holes for the x belt clips, I added spaces for nuts. This so I...
Topics: anet_a8_upgrade, 3D Printer Accessories, Anet_A8, thingiverse, bowden_clamp, bowden,...
2
2.0
May 21, 2021
05/21
by
Paul Tsigakis (paultsigakis)
data
eye 2
favorite 0
comment 0
This item is not finished, or have not been tried yet. This is a evolution of https://www.thingiverse.com/thing:3523424 Meant to be used together with https://www.thingiverse.com/thing:3521648
Topics: 3D Printer Parts, geeetech_i3_pro_b, Bowden_mount, thingiverse, bowden_hotend, bowden_extruder,...
7
7.0
Jan 19, 2021
01/21
by
Steven Fayers (stevenfayers)
data
eye 7
favorite 0
comment 0
A extension nut for a 10mm bowden tube push-to-connect (PTC) fitting usually found to hold the bowden tube into the hot end heatsink. Designed to leave-in-place with the bowden tube running though it, it's aimed to get easier access to removing the fitting (whenever there's a clog that needs unclogging). Design for Creality CR-10 but will probably work for others.
Topics: Creality, 3D Printer Accessories, bowden_tube, thingiverse, Creality_CR-10, cr-10s, cr-10,...
6
6.0
Apr 17, 2021
04/21
by
Joan Pagès (jpagesbri)
data
eye 6
favorite 0
comment 0
Modified motor mount from the original that can be found here: https://www.thingiverse.com/thing:2078038 Adding to it an angle that would make it stronger, avoiding it to break as it happened to me.
Topics: bowden, Bowden_mount, 3D Printer Parts, thingiverse, stl, bowden_extruder
9
9.0
Jan 10, 2021
01/21
by
Federico Duratorre (federico9292)
data
eye 9
favorite 0
comment 0
With this remix I intended to "semi close" both nut holes, the bottom way. in this case. didn't get the reason why initially was both way open, up and down. it's moderately tricky to insert and hold in position the nut, and inserting the bolt with the clamp and get the right height for the bolt to enter the nut... this way you can slide the nut, and it won't fall. just slide the bolt, and it will catch the nut, without holding it in the right place. easier mounting, that's it.
Topics: thingiverse, stl, 3D Printer Parts, bowden_clamp, bowden, Bowden_mount
8
8.0
Jun 10, 2021
06/21
by
Crunch3D Crnsh (Crunch3D)
data
eye 8
favorite 0
comment 0
This is a boden tube holder for the Prusa i3 Mk2. __Purpose:__ Hold a boden tube to the extruder so the filament is not exposed to air from an airtight enclosure. It also helps to prevent to low angles from the filament when you store your filament under the printer. For the enclosure see here: http://www.thingiverse.com/make:248096 __F.A.Q.__ __Why do you have your boden tube cut short after the holder?__ As i use now an IKEA Lack enclosure i have difficulties printing with a full boden tube...
Topics: filament_guide, bowden_extruder, airtight, bowden_tube, guides, bowden, thingiverse, bowden_hotend,...
8
8.0
Jan 21, 2021
01/21
by
Bob Smith (Hermiedug)
data
eye 8
favorite 0
comment 0
Bowden type extruders are great, but one drawback is in the use of the push fit clamps for the PTFE tube. If there is any slop in the tube to fitting part you will have endless problems with stringing etc because you are loosing retract movement and building in free play. My design is simple to print, but the part was created in tinkercad so is quite basic in design and requires some clean up caused by overhangs dropping, I feel adding supports would just give you something else to remove. The...
Topics: 3D Printer Extruders, ptfe_tube_mount, bowden_tube, retraction, thingiverse, bowden_clamp, bowden,...
4
4.0
Jun 12, 2021
06/21
by
(jackw01)
data
eye 4
favorite 0
comment 0
Summary This is a small NEMA 17 sized bowden extruder using all 3D printed structural parts, designed and tested for high-speed/high-volume printing. To make the design simpler and more compact, the filament is routed through the pivoting arm containing the idler bearing. This also allows the extruder to accommodate different sized drive gears. A large spring puts 14kg (30lb) or more (over 14kg is untested) of pressure at the point where the filament contacts the drive gear, allowing better...
Topics: bowden_extruder, bowden, thingiverse, extruder, stl
3
3.0
Apr 15, 2021
04/21
by
Roman Stepanov (RomanST)
data
eye 3
favorite 0
comment 0
All printable parts to assemble Prusa i2 with single Z motor. Meaningful differencies from vanilla i2: * 5 mm threaded rods * GT2 belts (974mm annular loop for Z axis) * Geeetech E3Dv5-clone bowden extruder * All optical endstops * Printed hotbed (ABS) * Long LM8LUU linear slide bearings * Build area 185x185x100 mm * Printing speed up to 100 mm/s (0.35 mm nozzle) * Extrusion feed rate above 500 mm/min (1.75 mm filament, MK8 gear) Current version is proven to work, although it is a moving...
Topics: bowden, 3D Printers, thingiverse, stl, bowden_hotend, prusa_I2, bowden_extruder
2
2.0
Mar 26, 2021
03/21
by
stephen chang (MarlyWong)
data
eye 2
favorite 0
comment 0
Had issues with the included Bowden fittings not holding the Bowden tube anymore. Made these in fusion360 and so far, working well for me. the Bowden tube screws into the internal thread, and there's a 2.8mm hole for a 3mm grub screw for extra strength. (be careful not to over tighten and restrict the filament path inside) please let me know if any fine tuning can be made. UPDATE: 10th/Nov/2019: Added V2 stl. Adds a recess for a 4mm nut. far superior grip on the Bowden tube. thread tube leaving...
Topics: stl, Bowden coupler, thingiverse, DotBit Dual Drive, extruder, Bowden, replacement coupler,...
3
3.0
Apr 13, 2021
04/21
by
Martin Axelsen (kharar)
data
eye 3
favorite 0
comment 0
A customizable mounting bracket for a Wanhao MK9 extruder effectively converting it to a bowden extruder. It has options for mirroring, and mounting brackets for Prusa i3 Hephestos and other printers boxed printers such as Ultimaker, Duplicator etc. Update version 3: I wanted to make a triple extruder mount to hang from the ceiling. This option is enabled by choosing render=3 in the code Update version 2: apparently the MK9 molded parts were redesigned by the manufacturer, so I had to update...
Topics: thingiverse, openscad, customizer, bowden_extruder, stl, Bowden_mount, diamond_hotend, MK9,...
4
4.0
Mar 10, 2021
03/21
by
Pierre M (crunchysann)
data
eye 4
favorite 0
comment 0
Print at 200 micron (0.2mm) with supports. use 2 M7 PTFE couplers
Topics: bowden, stl, thingiverse, 3D Printing, M7 bowden
8
8.0
Apr 27, 2021
04/21
by
brad shannon (bradjshannon)
data
eye 8
favorite 0
comment 0
This is a bowden extruder I designed to capture the push-fit connector. It will fit the NEMA 17 stepper profile. I also made the filament path modular so others can change it down the road. HARDWARE REQUIRED: Nema 17 stepper motor idler bearing is 625zz 2x 16mm M3 bolt for mounting male piece to stepper 1x 18mm M3 bolt for mounting male piece to stepper (idler fulcrum) long M3 bolt and spring and a couple washers for idler ADJUSTMENTS ONGOING AS I PROTOTYPE v1 9/17/2016 v2 9/26/2016 -- filament...
Topics: PFC, captured, thingiverse, connector, bowden_tube, extruder, bowden_extruder, bowden, stl, nema17,...
1
1.0
Aug 8, 2021
08/21
by
Stefan Lindgren (stefan63)
data
eye 1
favorite 0
comment 0
Another Bowden coupling design that holds the 4mm PTFE tube in a secure grip. Make sure to not over tighten, keep move a filament in the tube as you tighten the nut and stop when you feel the slightest friction increase, if possible try to insert a 1.9-2 mm steel wire while tightening to avoid to distort the tube geometry. Now you have a rigid Bowden connection. Several versions of the body to suit different applications and needs. Print in the kind of filament that suit your own specifications...
Topics: Bowden coupling, Bowden tube, thingiverse, bowden_extruder, 3D Printer Parts, Extruder, stl
8
8.0
Mar 10, 2021
03/21
by
brad shannon (bradjshannon)
data
eye 8
favorite 0
comment 0
This is a model I made while designing a new extruder. It is a NON-FUNCTIONAL model -- only intended as a visual aide while modelling things. It is designed based on the actual part, 5mm push fit quick connector, I ordered from uxcell on Amazon. See photo of actual part above.
Topics: bowden, bowden_adapter, bowden_coupler, stl, thingiverse, bowden_tube, push_fit, press_fit, 3D...
2
2.0
Mar 13, 2021
03/21
by
Jason H_ (cosworth99)
data
eye 2
favorite 0
comment 0
I designed this with the idea that standard fittings bite the capricorn tube and this just clamps it. Pop the barbs out of the fitting and use the metal to clasp around. Or use this if your fitting has lost the ability to grasp the tube. Also, it keeps the tube more upright with some fangs out there. It was designed in conjunction with this fang that uses the stock fan. https://www.thingiverse.com/thing:4325078
Topics: 3D Printer Parts, thingiverse, tevo_tornado, bowden_clamp, bowden_hotend, bowden_tube, stl
5
5.0
Mar 16, 2021
03/21
by
Nicola Achilli (3DWnico)
data
eye 5
favorite 0
comment 0
Motor support extruder for bowden. Application with 2 M3 x 20 screws, setting the hole on the support to mask it M6, so the fitting will only need to be screwed.
Topics: Bowden_mount, motor, extruder, 3D Printer Parts, bowden, bowden_extruder, stl, thingiverse, support
3
3.0
Jun 10, 2021
06/21
by
Naor Livne (cypher0)
data
eye 3
favorite 0
comment 0
Just a simple plug to fill a hole of an empty bowden connector, used if you have a box with multiple outputs but you only want to use one.
Topics: plug, bowden, thingiverse, bowden_tube, bowden_connector, hole_plug, 3D Printer Accessories, stl
7
7.0
Jan 14, 2021
01/21
by
Eason Avant (ohfudge)
data
eye 7
favorite 0
comment 0
I didn't see the point in using a direct drive extruder on the Vulcanus V1, especially the one that was suggested since that extruder probably wouldn't work with flexible filaments, plus bowden extruders are faster. So I made this hotend clamp that allows you to use a bowden extruder (with a hotend that is designed to be used w/ a bowden extruder). This clamp should prevent the bowden tube from slipping out of the hotend, provided that your hotend has a bowden tube fitting built into it like...
Topics: e3dv6, thingiverse, improved, bowden_tube, conversion, stl, vulcanus_v1, 3D Printer Parts,...
8
8.0
Mar 18, 2021
03/21
by
Martin L. (ML3DPrinting)
data
eye 8
favorite 0
comment 0
This little gadget can be used to perfectly cut your Bowden tube with a Knife of your Choice! Easy but efficient. The aid tools come along with 3 different sizes of knife slots ( 0.5, 0.75 & 1mm ) to perfect fit your personal knife cut width. There are three versions to choose for You, depending on Your printer/filament: - 4.00mm Version is for 1.75mm Filaments - 6.35mm Version is for 2.85mm Filaments - Combi-Version is for both Filament sizes What do You need this thing for? Its a simple...
Topics: Bowden_mount, Anycubic, Anycubic_I3_Mega, Ai3M, 3D Printing, bowden_extruder, NSFW, bowden_tube,...
3
3.0
Apr 13, 2021
04/21
by
Roman Stepanov (RomanST)
data
eye 3
favorite 0
comment 0
You'll need two of this. Compatible with my own direct drive extruder (http://www.thingiverse.com/thing:859583), Airtripper BSP v3 extruder (http://www.thingiverse.com/thing:126778), modified Airtripper BSP v3 extruder for flexible filament(http://www.thingiverse.com/thing:859583) Geared Extruder by terenceang (http://www.thingiverse.com/thing:456095) and all similar.
Topics: thingiverse, prusa_I2, airtripper, bowden_extruder, stl, bowden, 3D Printer Parts, airtripper_bowden
6
6.0
Jan 19, 2021
01/21
by
Serge Gordeev (Rocket_Knight)
data
eye 6
favorite 0
comment 0
1. Combined extruder folder with original cr10s fillament sensor 2. Contains the handle to which you can attach cables 3. CR10s fillament sensor box is designed as original and some minor issues was solved 4. Smooth and all directional fillament input holes 5. Fillament sensor box is far enough not to touch screw rod 6. No additional scews needed 7. Tested Notice. I've attached fusion 360 iges file in case you need to adjust srcrew holes diameters for you plastic/screws. Mine worked just fine...
Topics: 3D Printer Parts, bowden_tube, combined, fillament_guide, bowden_motor_mount, thingiverse,...
7
7.0
Mar 12, 2021
03/21
by
T Sherlock (brisinger)
data
eye 7
favorite 0
comment 0
Holder for SN04-N or similar proximity sensor for Anet A2 and similar 3D printers. Attaches to hotend fan.
Topics: thingiverse, bowden, bowden_clamp, bowden_extruder, anet_a2, proximity_sensor, Bowden_mount, SN04,...
1,478
1.5K
Feb 27, 2008
02/08
by
Prime, Temple, 1832-1903
texts
eye 1,478
favorite 0
comment 0
28 p. 26 cm
Topic: Bowden family
3
3.0
Jun 7, 2021
06/21
by
Jiří Svítil (mistrjirka)
data
eye 3
favorite 0
comment 0
I designed no screw bowden holder.
Topics: no_screw, anet_bowden_setup, anet_bowden_motor, anet_a8_mods, thingiverse, 3D Printer Parts, stl,...
1
1.0
Aug 9, 2021
08/21
by
Leonardo Barcelos da Silva (Leonardo1979)
data
eye 1
favorite 0
comment 0
I designed this support because I needed something smaller to better use the table and I couldn't find it.
Topics: thingiverse, 3D Printers, Bowden_mount, stl, bowden_hotend
6
6.0
Jan 16, 2021
01/21
by
Adrien PEYROUTY (baboun)
data
eye 6
favorite 0
comment 0
This is an idler for the Reprap hexagon hotend for bowden mount. The idler is available for both the standard prusa i3 x-carriage (with belt) and the x leadscrew upgrade (https://www.thingiverse.com/thing:641033). You'll need: 2 x M3 screws for the clamp 4 x M4 screws for the cariage mounting on standard prusa i3 version or 4 x M3 screws for the cariage mounting on the x lead screw upgrade version 1 x 1/4" pneumatic fitting
Topics: 3D Printer Parts, idler, hotend, hexagon, thingiverse, prusa, bowden_hotend, bowden, prusa_i3,...
3
3.0
Apr 20, 2021
04/21
by
Joshua Roberts (Blinkingsun)
data
eye 3
favorite 0
comment 0
This bracket is for running a reverse Bowden setup with cable chains without restrictive contact on a Folgertech FT-6 printer (may also work on FT-5). It leaves 15mm of clearance for my parts cooling setup. To install, lay down 3-4 pieces of blue tape on the guide rail (for rail clearances) and set the piece on top of the tape, You can drill into the side of the acm (basically just plastic here) with a 3/32" drill bit and m3x.5 - 8mm bolts with countersunk heads will screw right in. Not...
Topics: thingiverse, Bowden_mount, stl, folgertech_ft6, FolgerTech, bowden, 3D Printer Accessories,...
9
9.0
Jan 12, 2021
01/21
by
(mavrick5150)
data
eye 9
favorite 0
comment 0
Bowden extruder for flsun kossel mini.
Topics: 3d_printer, extruder, thingiverse, stl, filament, kosell_mini, bowden, Bowden_mount, bowden_hotend,...
3
3.0
Mar 5, 2021
03/21
by
Jason Leadbetter (costanza)
data
eye 3
favorite 0
comment 0
I started using a retractable badge holder to hold up my bowden tube. I thought the tube could use a little extra support, so I whipped up the Bowden Arch support device in Fusion 360. The Bowden Arch is 300mm/12 inches wide.
Topics: stl, 3D Printer Accessories, support, Bowden, bowden_tube, bowden_extruder, filament_holder,...
5
5.0
Jan 21, 2021
01/21
by
Zdenek Ondracek (zdenek_o)
data
eye 5
favorite 0
comment 0
Mount for bowden heatsink/extruder E3D V6 (16mm/12mm hole) for REBELII V32 x-carriage. Source files for REBEL printer, you can download on http://www.rebelove.org/
Topics: Rebel_II, 3D Printer Extruders, rebel2, thingiverse, bowden, bowden_extruder, Bowden_mount, stl
9
9.0
Jan 10, 2021
01/21
by
(someoneonly)
data
eye 9
favorite 0
comment 0
Slight remix of the bowden setup by tech2C. Made the Fan duct 1.75mm longer to accommodate for E3D Clones. [Project can be edited in tinkercad.](https://tinkercad.com/things/kmh3z7jFqd3) Dont worry about the lines in the stl file. Your slicer will ignore it.
Topics: thingiverse, stl, E3D, fan_duct, bowden, Bowden_mount, 3D Printer Extruders, bowden_extruder
4
4.0
Mar 4, 2021
03/21
by
Florian Loch (lochjay)
data
eye 4
favorite 0
comment 0
The hose has always pulled back a little when retreating. Therefore, I have designed this little clip to prevent this.
Topics: fitting, bowden_tube, 3D Printer Parts, thingiverse, bowden_extruder, push, stl, bowden, Lock
5
5.0
Jan 21, 2021
01/21
by
Vadym Cherner (vadymch)
data
eye 5
favorite 0
comment 0
This is a stabilizer for extruder filament feed. Included ZZ608 bearing, nipple pipe from bicycle hose and drag chain out dimension 12,5 x 10 mm. The construction ensures avoidance of twisting of Teflon tube, in which runs the filament.The drag chain end below must be free, to avoid the jam. You can watch two videos on my Youtube channel: https://youtu.be/ZQ4dO8YZSec https://youtu.be/dybQ_ayYJK8
Topics: stabilizer_bowden, drag chain, thingiverse, 3D Printer Extruders, bowden_extruder, Bowden_mount, stl
8
8.0
Apr 27, 2021
04/21
by
Tycho (TheCapitalDesign)
data
eye 8
favorite 0
comment 0
Just another Bowden-tube-lock-clip. I dropped mine in the printhead too many times. When you use the front pins the printhead might be blocked from going in the max Y direction. See picture 4. It's more save to use the backpins. This is why the clip is mirrored. You can customize the thickness in the customizer (the app found here on the right above). The SCAD file is slightly different form the STL's and the picture but should fit even better. Let me know in the comments if you want any...
Topics: thingiverse, bowden_clamp, ultimaker, bowden_tube, 3D Printer Parts, stl, clip, Bowden_mount
6
6.0
Apr 17, 2021
04/21
by
Peter Philips (gixxer750)
data
eye 6
favorite 0
comment 0
Bowden fitting for Tevo Titan extruder.
Topics: bowden_clamp, 3D Printer Parts, thingiverse, stl, PTFE_connector, bowden fitting, Bowden_Coupling
2
2.0
Jan 9, 2021
01/21
by
Dwen Dooley (dwendooley)
data
eye 2
favorite 0
comment 0
Creality's CR-6/SE comes with spare bowden tube clips, but since they're tiny and plastic, easy to lose, easy to make more. So make some spares!
Topics: thingiverse, bowden_tube, stl, 3D Printer Parts, bowden_clamp, bowden, Creality_CR6-SE
2
2.0
Jun 22, 2021
06/21
by
juan sebastian (jusebago)
data
eye 2
favorite 0
comment 0
Nema 17 Motor Mount bracket for bowden extruder P3Steel 3x M3 nuts. 2x M3 12mm screws.. 1x M3 15mm screw, or longer.
Topics: stl, bowden, Bowden_mount, nema17, thingiverse, bowden_extruder, P3steel, 3D Printer Parts, extruder
2
2.0
Mar 31, 2021
03/21
by
Crist Cost (Kriegsteinul)
data
eye 2
favorite 0
comment 0
For Sapphire S and maybe for sapphire pro. Using the linear rail end of travel screw to mount.This will reduce the stress on the tube lock fitting.I printed TPU for noise,vibration...basicaly I like the material.
Topics: bowden_clamp, thingiverse, bowden_extruder, 3D Printer Accessories, Sapphire_S, Bowden_mount, stl
3
3.0
Mar 31, 2021
03/21
by
David Gabriel (Feanir)
data
eye 3
favorite 0
comment 0
Remixed for use with 2040 extrusion on AM8
Topics: bowden, thingiverse, 3D Printer Parts, AM8, bowden_extruder, Bowden_mount, stl, Anet_AM8
7
7.0
Apr 22, 2021
04/21
by
(Boraas)
data
eye 7
favorite 0
comment 0
A simple plug that fits the printrbots aluextruder to adapt it to receive a air fitting for a bowden setup. The other half of the puzzle http://www.thingiverse.com/thing:1351676
Topics: printrbot, bowden_extruder, Bowden_mount, 3D Printer Parts, bowden, stl, Printrbot_Simple,...
3
3.0
Mar 15, 2021
03/21
by
J-F Bouchard (monsieurglad)
data
eye 3
favorite 0
comment 0
The provided clip is 1,2mm thick. After this remix: https://www.thingiverse.com/thing:4734459 I was looking for a way to keep it close to where it belong. Pinch the hole to pass it throught the clip, then push in the loop end. The loop is 30mm, hole is 4mm, slides on PTFE tube or bolt on extruder.
Topics: thingiverse, bowden, TPU, loop, bowden_clip, bowden_coupler, stl, 3D Printer Parts
3
3.0
Apr 20, 2021
04/21
by
XBobnl (XBobnl)
data
eye 3
favorite 0
comment 0
Hi there, I've remixed the mount (yellow part) to add my runout sensor in line with the 3D bowden extruder. I used this cheap and easy runout sensor: Black: http://bit.ly/2T7cbzt White: http://bit.ly/2VrYnMH Just works like and endstop. Update: 2019-03-01 Added some border to hold the M3 nuts for the runout sensor. This is in file V2. The file without this border is stil available. In the pictures the yellow part is the V1 version. The red images is the V2 version. You'll need the default m3...
Topics: thingiverse, Bowden_mount, stl, 2020, bowden, bowden_extruder, 3D Printer Extruders, mount
7
7.0
Jan 14, 2021
01/21
by
William Henderson (Croxphire)
data
eye 7
favorite 0
comment 0
Support brace for Bowden tube which was getting jammed do to the Bowden tube bending too much. The hotend is an E3D V6. I used the basic mod that's already out there to be able to attach the hot end and the support that I designed just slides over on top of that. Then the piece for the part fan is just the fan cone that's already out there. I put a couple of Springs over the screws so that I could adjust the distance of the fan while keeping tension. See Video Here -->...
Topics: thingiverse, bowden_tube, stl, 3D Printer Parts, bowden_clamp, Bowden_mount, support
7
7.0
Jan 18, 2021
01/21
by
(wavexx)
data
eye 7
favorite 0
comment 0
Bowden tube support clamp for the original Tarantula carriage. In some circumstances (high Z or short tube), the bowden tube tends to overflex just before the hotend. This clip snaps directly on the original carriage, providing a more tapered bend for the tube into the hotend. Easy to print and designed to fit just behind the [radial fan fang](https://www.thingiverse.com/thing:2175956) (as pictured). Supports the tube in any direction. Comes in two variants: v1: more rigid, longer vertical...
Topics: 3D Printer Accessories, bowden_tube, clamp, thingiverse, tevo_tarantula, bowden_clamp, bowden,...
6
6.0
Jan 17, 2021
01/21
by
Kieran Dolan (kieranpat)
data
eye 6
favorite 0
comment 0
little mount I designed for my am8 where you use m5 bolt and square nut to lock into place
Topics: 3D Printer Accessories, thingiverse, 2020_extrusion, bowden, dual_extruder, bowden_extruder,...
10
10.0
Apr 16, 2021
04/21
by
Jiri Mysicka (Georg_cz)
data
eye 10
favorite 0
comment 0
During working on my own Funbot i1 printer I have modify a little hotend holder. I would like to use bowden hotend because of weight of extruder instead original holder.
Topics: hotend, E3D_Hotend, bowden, Bowden_mount, 3D Printer Parts, thingiverse, stl, bowden_hotend, funbot
5
5.0
Jan 15, 2021
01/21
by
Gareth Price (bobblejot)
data
eye 5
favorite 0
comment 0
## Bowden Adapter. ### Small Bowden clips for standard push fit fittings. ---------------------------------------- [Bobblejot Website](http://bobblejot.com) [Bobblejot GitHub](https://github.com/Bobblejot/) [Bobblejot Twitter](https://twitter.com/bobblejot) Just small little Bowden clips which come in handy, remember seeing them before but couldnt find them again so quickly made up my own. The one with the retainer comes in very handy. Anyway i printed these in Taulmans 230 Nylon and they came...
Topics: thingiverse, bowden retainer, pushbutton, stl, push_fit, 3D Printer Accessories, clip, bowden,...