3
3.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Birdman (Fly_Like_Birdman)
data
eye 3
favorite 0
comment 0
Star wars visions lightsaber as of printing i've scaled down to 80 percent to give better size I printed standing up (two main parts) ver 2 made main handle a little longer
Topics: cosplay_prop, thingiverse, star_wars, prop, Props, cosplay, cosplay_weapon, stl, starwars,...
2
2.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Stuart Bunsey (bottles124)
data
eye 2
favorite 0
comment 0
This is the Biggoron's Sword from Ocarina of Time 3DS. I just took the sword 3d model from the game and scaled it to real-life measurements, then cut it into pieces on Blender. Some of the blade pieces are shorter than others because I did not notice I cut them too big and had to cut them down to fit on my printer. There are no connecting pieces because I'm not that experienced with Blender, but anyone is welcome to remix it. My sword is holding up fine with plastic cement glue. Note: Anything...
Topics: cosplay_prop, thingiverse, link, video_game, swords, Video_games, sword, Biggoron_Sword, Props,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Zachary Caudill (ZacCaudill606)
data
eye 1
favorite 0
comment 0
Just a basic sword
Topics: cosplay_prop, thingiverse, swords, 3D Printing, sword, weapon, cosplay, knife, stl
2
2.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Evan Carothers (EC3D) (ecaroth)
data
eye 2
favorite 0
comment 0
[](https://www.kickstarter.com/projects/ecaroth/obliegs-gallery-of-grave-goods-printable-gaming-props) -------------------- This is a freebie from my currently Kickstarting project [Oblieg's Gallery of Grave Goods](https://www.kickstarter.com/projects/ecaroth/obliegs-gallery-of-grave-goods-printable-gaming-props), full of printable props/artifacts plus 5e content (lore book and card deck). Included in this freebie pack is the...
Topics: cosplay_prop, thingiverse, pathfinder, prop, Toy & Game Accessories, dnd, cosplay, stl, artifact
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Paule Korse (iPau)
data
eye 1
favorite 0
comment 0
Split the cool sword into smaller parts. I printed it at 205% size but the biggest part (Called "B1.stl") was too big for my Ender 3 printer so be careful. Oh, and you can make the handle slightly bigger than the other parts. In my opinion, it would look better because the blade is pretty long for the handle. If you print it on 205%, the handle is just big enough for my one big hand. So anyways, good luck printing.
Topics: Izuku Midoriya, MHA, cosplay_prop, thingiverse, My hero academia, prop, sword, Fantasy, Props,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Conan Daly (capnplague)
data
eye 1
favorite 0
comment 0
Modular sci-fi belt storage containers for use at Orion Sphere LRP (http://www.orionspherelrp.co.uk). Each different storage container is designed to clip into one of the associated belt loop sections - currently there are belt loops for 1 and 3 containers. These can then be worn in any combination on a belt or strap. Orion Sphere LRP is a science fiction live roleplay game that run events in the UK. Players take on the role of starship crews, companies and research institutes, as one of a host...
Topics: thingiverse, cosplay_prop, container, prop, scifi, Costume, sci-fi, Orion_Sphere_LRP,...
2
2.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Sandy Holden (SandBag96)
data
eye 2
favorite 0
comment 0
This Batman Gauntlet is split in two parts and designed to be held together with a strap, tie or cord. Any attachment method that fits through the slots will work but the Velcro straps I used were only £3 and can be found here https://www.amazon.co.uk/gp/product/B09KX6B27F/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 This design was produced so it could be printed on an ender 3 build volume. Any feedback (positive or negative) would be greatly appreciated so please let me know what you...
Topics: Ender, film, cosplay_prop, The_Dark_Knight, superhero, boba, bobafett, batman_vs_superman,...
2
2.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Arabelle Foster (Shwitt)
data
eye 2
favorite 0
comment 0
Hawks/Keigo Takami Belt pieces There are several kits to buy online but I was surprised there were no models since the pieces are quite simple! Designed to use with 2" wide nylon webbing/strapping, would clip in the back. Print 2 H's, 1 centerpiece, and however many of the singular pieces you'd like/need to complete the belt. The pieces are designed with spacers built-in on the backside to keep perfect part width on the belt. Prints best vertically and optionally use gold filament or...
Topics: bnha, cosplay_prop, thingiverse, keigo_takami, Costume, my_hero_academia, cosplay, hawks, stl
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Birdman (Fly_Like_Birdman)
data
eye 1
favorite 0
comment 0
accel world chiyu hair clip or bag accessory
Topics: thingiverse, cosplay_prop, anime_props, cosplay, Costume, neko, anime, stl
2
2.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Manuela Cecchetti (Manuki)
data
eye 2
favorite 0
comment 0
Spike and skull decorations for Astrid Cosplay Costume. The skull is a remix of this: https://www.thingiverse.com/thing:3590504 I made some changes to be able to print it flat and with no need for supports. Skulls and and spikea (bolts) all have a 3mm hole on the back for 3MA or other 3mm screws. Spikes are my original desing. At least 10 Large skulls are needed for the skirt 2 small skulls for the hood 1 XLarge Skull for the Axe 40 spikes are needed for the skirt. On kids 40 small spikes are...
Topics: cosplay_prop, thingiverse, astrid, httyd, howtotrainyourdragon, 3D Printer Accessories, cosplay, stl
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Kevin Clayton (KevinMakesCoolThings)
data
eye 1
favorite 0
comment 0
The Demon King's Dagger from Solo Leveling. There are technically two of these, but they're identical so I only made one. I cover the whole process in this video: https://youtu.be/foW-W4xd2KY This is the same size as my other daggers but ended up feeling surprisingly small. I'd recommend scaling up up by 20-30% if you have large hands.
Topics: dagger, cosplay_prop, thingiverse, solo_leveling, cosplay_dagger, dual_daggers, Props, cosplay,...
3
3.0
Apr 20, 2022
04/22
Apr 20, 2022
by
A J (ICosplayInsanity)
data
eye 3
favorite 0
comment 0
Who volunteers to go to the farm? The proximity cuff used by the Green Dolphin Street Prison, perfect for a Jolyene, Hermes, or Foo Fighters Cosplay! Careful, don't stray too far! RightSideCuff x 1 LeftSideCuff x 1 GreenDolphinLogo x 1 BarAccent x 1 AlignmentPin x 2 To have a satisfying click closure, you will need six 3mm x 1mm magnets, easily purchased off of e-commerce sites. A straightened paperclip wire, cut to length was used for the hinge. This cuff fits my slim 50mm in width wrist. If...
Topics: cosplay_prop, thingiverse, stand, StoneOcean, costume, jojosbizzareadventure, cosplay, Costume,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Thomas Behncke (Ekcnheb)
data
eye 1
favorite 0
comment 0
WIP... DOES NOT FIRE A PROJECTILE AND WAS DESIGNED NOT TO. Full version available EP-1 here https://cults3d.com/en/3d-model/tool/ep-1-ekcnheb
Topics: cosplay_prop, thingiverse, gun, Movie_Prop, working, Props, stl, pistol
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Can Babacan (endless_creativity)
data
eye 2
favorite 0
comment 0
Second Upload! This is a Crusader Dagger I designed in my boring freetime. It might not be perfect but I'm a newbie so yeah. You can use this for cosplay or stuff like that if you like.
Topics: crusader, dagger, cosplay_prop, thingiverse, medeval, sword, weapon, cross, knife, medieval, Props,...
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Marko Mewes (MarkoMewes)
data
eye 2
favorite 0
comment 0
Hello everyone, today i want to show you the corepart of a new project. Everytime i saw these bulky LARP-knifes i thougth they are ugly as fu**. Randomly i saw a post of someone in a Facebookgroup who printed medieval daggers form TPU so i desided i try it to, but with a modern design! I made the edges of the Blade (the one with the saw on the back) a little bit rounder so it would be "more pleasant" when you use it in game. The second blade is more WIP but may be you like it. The...
Topics: cosplay_prop, thingiverse, TPU, WIP, LARP, Props, knife, stl, prop, combat_knife
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Jeff McAllister (ImperialWalker)
data
eye 2
favorite 0
comment 0
Just a little quality of life model for your CountSpatula Ghostbusters trap build. This holds your Bargraph and LED in the correct position and provides a mounting point eliminating the need to flood the area with copious amounts of hot glue. Simply print it out and the LEDs should slide right in with a good pressure fit.
Topics: 1980s, cosplay_prop, thingiverse, costume, Ghost Trap, Ghostbusters, Props, cosplay, stl, Muon,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Conan Daly (capnplague)
data
eye 1
favorite 0
comment 0
Multi-part sci-fi containment cube, to be printed in parts. The finished cube consists of 8 vertex sections (Cube_Outer + Cube_Inner) connected by 12 edges (Connector). There is also an optional crystal that can sit in the middle, suspended by clear acrylic rods (but you can contain anything in it really (things will look great if you use transparent fishing line to suspend them near-invisibly). Originally designed for use at Orion Sphere LRP (http://www.orionspherelrp.co.uk), a science fiction...
Topics: cosplay_prop, thingiverse, scifi, sci-fi, Orion_Sphere_LRP, science_fiction, LARP, stl, Decor, LRP,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Jeff McAllister (ImperialWalker)
data
eye 1
favorite 0
comment 0
If you look very carefully at the original GB1 trap you will notice that peeking out from under the aluminum sides there are screws that were used to assemble the trap. This remix adds in holes for real or faux screws as well as a place to mount some internal electronics. ... Original Idea Originally I created a template to determine the positions of the holes and used a countersink bit to make room for screws. This worked, but I wasn't happy with the position of the holes, or how messy it...
Topics: ghostbusters, 1980s, cosplay_prop, thingiverse, costume, Ghos, Props, Ghost trap, cosplay, stl,...
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Andres Feliciano (WireFox)
data
eye 2
favorite 0
comment 0
MY LIGHTSABER DESIGN. WANTED A NON ROUND SHAPE
Topics: cosplay_prop, thingiverse, LIGHTSABER, Costume, SITH, STAR_WARS, JEDI, starwars_costume, stl, PROP
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
David Young (Scorlord)
data
eye 2
favorite 0
comment 0
This is a custom USMC Ka Bar inspired scifi dagger. STLs will allow printing of entire model, halves, or separate parts.
Topics: cosplay_prop, thingiverse, ka bar, star_wars, boba_fett, mandalorian, Other, cosplay, knife, stl
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Evan Carothers (EC3D) (ecaroth)
data
eye 2
favorite 0
comment 0
[](https://www.kickstarter.com/projects/ecaroth/obliegs-gallery-of-grave-goods-printable-gaming-props) -------------------- This is a freebie from my currently Kickstarting project [Oblieg's Gallery of Grave Goods](https://www.kickstarter.com/projects/ecaroth/obliegs-gallery-of-grave-goods-printable-gaming-props), full of printable props/artifacts plus 5e content (lore book and card deck). Included in this freebie pack is the...
Topics: tabletop, cosplay_prop, thingiverse, pathfinder, prop, Toy & Game Accessories, dnd5e, dnd,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Hamm Mann (MasterShredder)
data
eye 1
favorite 0
comment 0
Finally giving a tribute to the initial object that sparked the interest of 3d printing in myself, smelissali's Sword of Feast and Famine. Seeing that for the first time, I knew that I wanted one myself. And now, after printing a couple, I am ready to try my own hand at continuing making physical copies of these legendary swords, starting with the Sword of War and Peace based off of Filip Burburan's artwork for the Masterpiece card. Just like smelissali's model, this model uses 1/4th inch...
Topics: cosplay_prop, magicthegathering, thingiverse, prop, sword, stl, swordofwarandpeace, Props, wallart,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Conan Daly (capnplague)
data
eye 1
favorite 0
comment 0
Modular Vane Greeblies for Orion Sphere LRP devices (http://www.orionspherelrp.co.uk). There is a multitude of different designs, all of which fit together. Includes various designs of vane, with connectors, corners, 3-way and 4-way junctions, and end pieces. Designed to go over a Neopixel-style addressable LED strip for various lighting effects. These vane panels can enhance any larger-scale device or prop, or add visual interest to otherwise dull surfaces. The corners and junction sections...
Topics: greeblie, cosplay_prop, thingiverse, greebles, greeble, LARP, Props, cosplay, stl, prop, LRP
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Conan Daly (capnplague)
data
eye 1
favorite 0
comment 0
Exotic Particle Storage container prop for Orion Sphere LRP (http://www.orionspherelrp.co.uk). Has a simple belt loop and a screw top, and is sized to be compact, but still big enough to hold exotic particle stickers. Orion Sphere LRP is a science fiction live roleplay game that run events in the UK. Players take on the role of starship crews, companies and research institutes, as one of a host of alien species and in one of four competing Factions. Increase the infill percentage for the body,...
Topics: cosplay_prop, thingiverse, Containers, scifi, OSLRP, Orion_Sphere_LRP, science_fiction, LARP,...
3
3.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Kevin Clayton (KevinMakesCoolThings)
data
eye 3
favorite 0
comment 0
I remade Baruka's Dagger, which I originally posted in late 2020. This time I made it in Blender and improved a couple of things. I cover the entire process, from design to painting, in this video: https://youtu.be/66dbw3Sy5PA
Topics: cosplays, thingiverse, cosplay_prop, Dagger, solo_leveling, cosplay_dagger, Baruka, quadrocopter,...
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Coltan New (Giorno_Giovanna85)
data
eye 2
favorite 0
comment 0
couldn't find a file for these nowhere so i made it i'll upload pictures once i get it made made in tinkercad
Topics: thingiverse, cosplay_prop, Tokyo_Revengers, cosplay, Costume, tokyo_revenger, manga, earrings,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Shishi Desuka (Shishidesuka)
data
eye 1
favorite 0
comment 0
Striker Melee From the latest battlepass .
Topics: cosplay_prop, thingiverse, valorant_game, 3D Printing, valorant_knife, valorant, cosplay_weapon, stl
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Shishi Desuka (Shishidesuka)
data
eye 1
favorite 0
comment 0
Gaia melee from newest Update on Valorant .
Topics: cosplay_prop, thingiverse, valorant melee, axe, 3D Printing, valorant_knife, valorant,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Conan Daly (capnplague)
data
eye 1
favorite 0
comment 0
Generic Shield Generator prop for Orion Sphere LRP (http://www.orionspherelrp.co.uk). Basic ring design, made from two shells that should have enough space to contain an Arduino Nano for lighting effects. There is a hole to place a button on it, and the two shells screw together. Orion Sphere LRP is a science fiction live roleplay game that run events in the UK. Players take on the role of starship crews, companies and research institutes, as one of a host of alien species and in one of four...
Topics: cosplay_prop, thingiverse, prop, scifi, Costume, OSLRP, Orion_Sphere_LRP, science_fiction, LARP,...
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Josh Armstrong (thezeldamaskguy)
data
eye 2
favorite 0
comment 0
Made with extreme attention to detail, based off the original in-game model. Enjoy!
Topics: cosplay_prop, thingiverse, creepy, Headwear, mask, costume, Spooky, creepypasta, Costume, Facemask,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Conan Daly (capnplague)
data
eye 1
favorite 0
comment 0
Elysian style Shield Generator prop for Orion Sphere LRP (http://www.orionspherelrp.co.uk). This is a riff on my earlier generic shield generator design, with a more organic and crystal-based aesthetic to better suit the Elysian Commonality faction. Orion Sphere LRP is a science fiction live roleplay game that run events in the UK. Players take on the role of starship crews, companies and research institutes, as one of a host of alien species and in one of four competing Factions. The main...
Topics: cosplay_prop, thingiverse, prop, scifi, Costume, OSLRP, Orion_Sphere_LRP, science_fiction, LARP,...
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Leonidas Breakre (BreakerboxCosplay)
data
eye 2
favorite 0
comment 0
A few people requested it so here it is, The Soldier helmet from Halo Infinite! And of course a cat ear attachment is included, see image for placement. Scaled for a 23.5" head, may require additional scaling for ideal fit. Support me on Patreon: https://www.patreon.com/Breakerbox Follow on Instagram: @breakerboxcosplay
Topics: cosplay_prop, thingiverse, master_chief, 3D Printing, Halo, helmet, cosplay, stl, halo_infinite
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Amy Harrison (AmyCantFlyNow)
data
eye 1
favorite 0
comment 0
Hand of melania sword from elden ring. This one is scaled to be around 1m but i think the one in game might be as tall as she is so once i have finished my test print i will update the scale and the sliced parts accordingly
Topics: cosplay_prop, thingiverse, elden ring, Props, melania, stl, prop, design
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Piotr Klimas (Ocelotzlasu)
data
eye 2
favorite 0
comment 0
This is a project for a 124cm so almost life size Minecraft trident. There are holes where metal rods can be placed: - three holes for 8cm long 5mm diameter rods in the head of the trident - and a hole through the whole thing for a 1m long 10mm diameter rod You don't have to use any rods as you can just glue it together and it should be fine. I just wanted to be able to add some strength and weight so it feels nice (and whack someone with it without braking it lmao) Print pole_mid 4 times and...
Topics: cosplay_sword, cosplay_prop, thingiverse, minecraft_figures, trident, Minecraft_Sword, Props,...
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Raymond Chen (RYC03)
data
eye 2
favorite 0
comment 0
A replica Hololive EN's Vtuber Ouro Kronii's folding fan, as revealed On January of 2022 as part of her New Year Kimono outfit. To make this fan, please print the parts individually and stack the pieces (if you go by the file name, it would be "25" -->"1"-->"2" ....-->"24"), the axle pin is a M3 x 30mm screw with M3 washers and nut. There are location pins at the root of the fan, but to strengthen the fan, please thread and tie strings between...
Topics: cosplay_prop, thingiverse, HololiveEN, Accessories, Hololive, stl, folding_fan, Ouro_Kronii
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Kai Hirt (TI6815)
data
eye 1
favorite 0
comment 0
Hi Folks here is a Rocket Launcher for your Cosplay or as Display. The Barrel is cut in four pices for easy Print. You can also use a 75mm PVC Pipe as Barrel. I scale my print files to 105 % and use the cutted Barrel. Happy Printing
Topics: Fallout, cosplay_prop, thingiverse, fallout_4, Scifi weapon, Rocket Launcher, Star Wars Weapon,...
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Giovanni Colò (Giobby66)
data
eye 2
favorite 0
comment 0
Prop model of the famous 30 round AR15 magazine, this is a prop and it's in no way a functioning piece of firearm. The model is not scaled to size but the proportions are right, you just need to dial in the correct height in the slicer and it will scale up nicely. If you're happy with the results consider offering me a beer! In any case thank you for downloading! PayPal: @giovannicolo // giovannicolo1@gmail.com
Topics: cosplay_prop, thingiverse, Props, LARP, firearm, cosplay, cosplay_weapon, stl, AR15, prop
3
3.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Christopher Angell (Rexermus)
data
eye 3
favorite 0
comment 0
I printed out CaseStudyNo8's Obi-Wan hilt and absolutely loved the detail and quality of the model he has put up on Thingiverse, but there was one qualm I had with his design. His Covertec Wheel didn't fit in a genuine Covertec Clip which threw a spanner in my plans of belt hanging...So I redesigned the covertec wheel to fit in a genuine covertec clip, making this a perfect cosplay/belt hanger version of CaseStudy's gorgeous Kenobi hilt
Topics: Lightsaber_Hilt, cosplay_prop, thingiverse, Kenobi, lightsaber_star_wars, obi_wan_kenobi,...
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Danny Eichhoff (Wiz_Wizard)
data
eye 2
favorite 0
comment 0
The D-Scanner from Digimon Frontier This is my first project. I hope you have fun with it.
Topics: cosplay_prop, thingiverse, 3D Printing, Cosplay, digivice, digimon, anime, stl, prop
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
oscar blanco (sketchtoon_com)
data
eye 1
favorite 0
comment 0
Originally made in 3ds Max, then finished in Zbrush. Free for download. Enjoy!
Topics: woodland_creature, cosplay_prop, horn, mythicalbeast, epic_scale, cosplay, costume_prop, stl,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Leonidas Breakre (BreakerboxCosplay)
data
eye 1
favorite 0
comment 0
Almost 2 years ago I created my first 3d printable model, the Ends Of The Earth Keyblade. since then I have learned a lot about 3d printing and about making printable models. While it looks the same I have made a couple of updates to this. First, the pieces are now solid instead of the halves that needed to be mirrored. The halves even when using a apoxy still tended to split under the full weight. I have resized the center channel to fit 7/8" wooden dowels and added channels for...
Topics: cosplay_prop, thingiverse, Kingdom_Hearts, ends_of_the_earth, 3D_printing, 3D Printing,...
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Max Qdree (artist_3d)
data
eye 2
favorite 0
comment 0
Front sight for HK MP5. These are test print parts. 3D model can be found here: https://cults3d.com/en/3d-model/game/hk-mp5. The weapon contains more than 90 parts.
Topics: sight, cosplay_prop, thingiverse, 3D_printing, spare_parts, gun, hk_mp5, mp5, weapon,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Ness Elde (Nesselde)
data
eye 1
favorite 0
comment 0
Made this pendant for a friend, and I though it would be cool to post it online if anyone need it! Scale it to your liking, and enjoy :)
Topics: Flora_cosplay, cosplay_prop, thingiverse, necklace, winx, Flora, Costume, winx_club, cosplay, stl,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Leon Groenewald (DictumVeritas)
data
eye 1
favorite 0
comment 0
This is a cigarette holder for cosplay, but made fully functional if you happen to be a smoker.
Topics: cosplay_prop, thingiverse, cigarette, functional_print, working, stl, Accessories
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Curtis Ryan (Th3Director)
data
eye 1
favorite 0
comment 0
UPDATE V2 After printing v1 the belt parts wasnt the best so i have re made with thicker wider belt clips for the wider belt I recommend support blockers on all sides but the back image has been attached After looking through Thingiverse for a Tva Collar and not finding one detailed enough for my liking, i decided to pull out the 3d modeler. This is my rendition of a Screen accurate Beltloop Tva collar for a loki cosplay This is my 2nd Serious model and would love peoples feed back I have...
Topics: TVA, thingiverse, LOKI, TVA_COLLAR, Prop, Costume, collar, stl, cosplay_Prop, cosplay_accessory
3
3.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Mighty Shrub (MightyShrub)
data
eye 3
favorite 0
comment 0
This is a prop knife I designed based on the one from the game Hunt: Showdown! I love this game and couldn't find any 3D models that I liked, so I made my own using a combination of Fusion 360 and Blender. It prints in multiple parts that fit together using a clever trick: small lengths of filament can be cut and glued into the corresponding holes to join the knife together. The holes will require some cleanup for the filament bits to fit, but it shouldn't be too labor-intensive to do so.
Topics: thingiverse, prop, video_game, cosplay_prop, stl, Hunt_Showdown, Props, knife
3
3.0
Jan 19, 2022
01/22
Jan 19, 2022
by
A D (Jaspurr)
data
eye 3
favorite 0
comment 0
Scaling: * Print the chains at 100% * Print the key connector at 48% * Print everything else at 50% If you have big hands, you might need to scale everything up Supports: * You'll need to print the claw upright with supports for everything over 34 degrees. Make sure to use a low infill for the supports so they are easy to take off. Use a brim or raft if you have trouble with adhesion. * If you use supports for the handguard, make sure to use low infill in the supports, otherwise they will be...
Topics: clawshot, Legend_of_Zelda, thingiverse, cosplay_prop, cosplay, twilight_imperium, stl, Props, Zelda
3
3.0
Jan 19, 2022
01/22
Jan 19, 2022
by
A D (Jaspurr)
data
eye 3
favorite 0
comment 0
###Description: This is a replica of the Lantern item from the video game "The Legend of Zelda: Twilight Princess" This is NOT a real lantern. Please do not use a plastic lantern like this with real fire. There are three different versions of the base. Two versions have a slot in the middle for you to place either a 2 inch or 1.5 inch electric LED candle (again please do not use real fire with plastic). The third version just has a flat interior with no slot. The lid has three holes...
Topics: Scans & Replicas, Legend_of_Zelda, thingiverse, cosplay_prop, cosplay, twilight_princess,...
3
3.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Rob T (DezignsIn3Dimensions)
data
eye 3
favorite 0
comment 0
My take on the PYM Arrow seen in Marvel's "Hawkeye" it is hollow, in 3 pieces and ready for electronics.
Topics: display, Marvel replica, pym, hawkeye, trick arrow, replica, thingiverse, prop, Marvel,...
3
3.0
Jan 19, 2022
01/22
Jan 19, 2022
by
A D (Jaspurr)
data
eye 3
favorite 0
comment 0
This is the Gale Boomerang from The Legend of Zelda: Twilight Princess. The model is split into 4 pieces, with three pegs that connect the pieces. You can either print the handle all in one piece (which then needs to be painted white and gold) or have the handle(Gale3)(white) and the end(Gale4)(gold). If you print the entire handle, then you don't need the third peg(Gale7) The wing and handle are white. The center is gold and brown, with a blue-green gem in the middle. At 100% scale, the...
Topics: Scans & Replicas, Legend_of_Zelda, thingiverse, prop, cosplay_prop, cosplay, twilight_princess,...
