1
1.0
Feb 22, 2022
02/22
Feb 22, 2022
by
Lucas Breidenbaugh (Cybezo)
data
eye 1
favorite 0
comment 0
Feeder ring for aquariums
Topics: thingiverse, fish_tank, Pets, aquarium, fishtank, fish, aquariums, stl
2
2.0
Feb 7, 2022
02/22
Feb 7, 2022
by
豉 諗彈 (wahfu9527)
data
eye 2
favorite 0
comment 0
28 x 20 x 15H Hinged Box
Topics: thingiverse, Hinged_box, Pets, aquarium, hinged, fishtank, stl
2
2.0
Feb 7, 2022
02/22
Feb 7, 2022
by
豉 諗彈 (wahfu9527)
data
eye 2
favorite 0
comment 0
28 x 20 x 15H inside
Topics: box, thingiverse, Hinged_box, Pets, aquarium, fishtank, hinge, stl
0
0.0
Jan 18, 2022
01/22
Jan 18, 2022
by
Dylan Blew (SrOrtega)
data
eye 0
favorite 0
comment 0
Here is a freestanding frag plug holder. This is great for when you are creating the frags and want to put them in a bowl of water before placing them back in the tank. It is also handy for when you dip your new frag from the LFS. Print with PETG.
Topics: reef_tank, corals, frag-plug, fishtank, Pets, coral, stl, reef, coral_reefs, thingiverse, aquarium,...
2
2.0
Dec 22, 2021
12/21
Dec 22, 2021
by
David DA SILVA SANTOS (David211)
data
eye 2
favorite 0
comment 0
en espérant que cela servent aux passionés et j'ajouterais d'autres créations par la suite
Topics: overflow, thingiverse, fishtank, Pets, stl, marine_aquarium, fish
2
2.0
Dec 16, 2021
12/21
Dec 16, 2021
by
Dylan Blew (SrOrtega)
data
eye 2
favorite 0
comment 0
This is a frag rack that I designed to hold up to 10 3/4" frag plugs. I printed in PETG. It is designed to work with the suction cups shown in the photo. They are available from HomeDepot for around 2$ a pack.
Topics: reef_salt_water, coral, aquarium, propagation, thingiverse, corals, fishtank, fish_tank, Pets,...
4
4.0
Nov 6, 2021
11/21
Nov 6, 2021
by
Alex Gibson (AlexanderGi)
data
eye 4
favorite 0
comment 0
Ever tried to propagate plants in your aquarium but couldn't find a good way to support them? Well look no further. The holders simply sit on the top lip of the aquarium. The back is open (on most of the styles) to allow the plants to be easily removed if the roots get too big. This design is quick to print and needs zero supports. I only used a single wall (with a .6mm nozzle) and a single top and bottom layer and it is plenty strong. Please note, I designed this to work with my Aqua One 620...
Topics: propagator, marine_aquarium, Pets, DIY_hydroponics, propagate, aquariums, shrimp_aquarium,...
2
2.0
Oct 22, 2021
10/21
Oct 22, 2021
by
Chri Sta (Debbysu)
data
eye 2
favorite 0
comment 0
Ich habe diesen simplen Stopfen mit Fusion 360 für meinen Eheim Aquaball gebaut. Er ist sehr einfach und erfüllt seinen Zweck ;) er wurde mit Flex Filament gedruckt. Für Eheim Rohre 9/12 I built this simple plug with Fusion 360 for my Eheim Aquaball. It's very simple and does the job;) it was printed with flex filament. For Eheim pipes 9/12
Topics: thingiverse, EHEIM, aquarium, Pets, stl, aquaball, fishtank, spareparts, filter
2
2.0
Oct 15, 2021
10/21
Oct 15, 2021
by
Jay PrintnPlay (jay_printnplay)
data
eye 2
favorite 0
comment 0
It is a filter used by hanging it on the back of the inside of the fish tank. It uses air, but there is a splash guard on the top, so it doesn't splash. A perforated plate can be inserted in the back of the filter, so you can install lights and organize various wires and air. (Exclusive feed container, hook, cleaning pin modeling data) * 20*20*25(h)cm /5t fish tank required * It is a practical filter that is easier to use and manage than the previous top all-in-one cover. However, since the...
Topics: thingiverse, aquarium, Pets, stl, HMF, fish_tank, fishtank, fish, filter, aquarium_filter
2
2.0
Oct 14, 2021
10/21
Oct 14, 2021
by
Alex Fullam (asfullax)
data
eye 2
favorite 0
comment 0
I made this for my reef tank and designed it so that I could hang this on the side of the tank and pop in frozen fish food cubes. Since they float, the fish can't get to it until it starts to dissolve and slowly feeds the tank over the course of 15-20 minutes. I also put spirulina, flake and even pellet food in it. I would recommend using PETG since that is fish and food safe.
Topics: DIY, thingiverse, reef_salt_water, stl, fish_feeder, fishtank, reef
3
3.0
Sep 30, 2021
09/21
Sep 30, 2021
by
daniel keely (danielkeely)
data
eye 3
favorite 0
comment 0
this is a simple DIY sponge filter. Put the air stone in the holder and simply add a sponge on the outside.
Topics: thingiverse, aquarium_filter, stl, fishtank, aquarium, fish_tank, fish, Parts
3
3.0
Sep 14, 2021
09/21
Sep 14, 2021
by
Yuan Shi (Silver44CroW)
data
eye 3
favorite 0
comment 0
design this little won't FLOAT cube to grow plants in an aquarium, easier maintain and readjustment to wherever you like the cube of plants to grow in your tank. 200c and bed 50c fan speed 90 print speed 55mm/s 95mm/s just add holder cups and stick, enjoy guys :) SEP 17 2021 designed a new 3 cubes holder PLA plus filament 205c and bed 55c fan speed 85 print speed 40mm/s 80mm/s
Topics: cube, thingiverse, stl, aquariums, Other, plants, fishtank, aquarium
3
3.0
Sep 12, 2021
09/21
Sep 12, 2021
by
Sam Ferlauto (Automate007)
data
eye 3
favorite 0
comment 0
Once printed remove the standard 45 degree tube that comes with the Juwel Bioflow Filter and attach this. If you want to restrict and have less bubbles then just reduce the airtube hole by any means but I found to eliminate a lot of sucking noise a simple piece of sponge squeezed and pushed into the air intake helps immensely The air tube is the only part that needs support and select Support "Touching Build Plate" only needed. I have also modelled up an elbow which I will be printing...
Topics: Juwel Fishtank, thingiverse, stl, Fishtank Aerator, Aquarium aerator, Venturi Nozzle, Aeration...
3
3.0
Sep 11, 2021
09/21
Sep 11, 2021
by
Tiago Bravin (ttbravin)
data
eye 3
favorite 0
comment 0
Connectable corner support for 5mm fish tanks. Can be used connected or individually to support tank covers, hanging structures, etc.. Print preferably using PETG.
Topics: thingiverse, corner, stl, support, glass, fishtank, Pets
3
3.0
Sep 11, 2021
09/21
Sep 11, 2021
by
Tiago Bravin (ttbravin)
data
eye 3
favorite 0
comment 0
Comb-like tool for manipulating surface plants on fish tanks. It gently grabs surface plants without damaging their delicate floating roots. Print in PETG for best results.
Topics: thingiverse, comb, stl, planted_tank, fishtank, aquarium, Pets
3
3.0
Sep 9, 2021
09/21
Sep 9, 2021
by
Eninzi Works (EninziWorks)
data
eye 3
favorite 0
comment 0
A simple cave for smaller aquatic pets to hide in. More available places to hide reduces stress and stress free critters are more active. No supports needed. Prints fine at .32 but for a better finish, print at .20mm.
Topics: Pets, decor, thingiverse, stl, fishtank, aquarium, fish_tank, pet, shrimp, fish, Decoration
3
3.0
Sep 9, 2021
09/21
Sep 9, 2021
by
Eninzi Works (EninziWorks)
data
eye 3
favorite 0
comment 0
An open feeding platform for your shrimp allows them to eat from above or below. Attaches to aquarium glass via 20 or 30mm suction cup like [this](https://v.gd/J3kT3A) one.
Topics: shrimp_tank, thingiverse, shrimp_aquarium, stl, 3D Printing, fishtank, aquarium, shrimp_feeder,...
3
3.0
Sep 6, 2021
09/21
Sep 6, 2021
by
Sander van der Wel (vdwel)
data
eye 3
favorite 0
comment 0
Since I use an oversized filter for my aquarium, te flow of water is to high with the standard outflow. This design diffuses the flow of water. Print with PETG, supports on the build plate only for the tube. Without the lid, you can still direct the flow into a specific direction. The outer diameter is suitable for a 12/16mm hose or similar (I use it for my JBL outflow).
Topics: water, stl, fishtank, aquarium filter, aquarium pump, thingiverse, Pets, aquarium, fish tank, fish,...
2
2.0
Aug 21, 2021
08/21
Aug 21, 2021
by
steven royer (royer1royer21)
data
eye 2
favorite 0
comment 0
This internal aquarium filter fits10g aquariums and is prefect for students and first-time aquarium keepers. adhere to the back of the aquarium with aquarium safe silicone you can order or buy at most pet shops. To print without supports lay the STL flat i would suggest using petg or abs to print with and an infill of 25-100% infill.
Topics: stl, fishtank, thingiverse, Pets, aquarium_filter, fish, filter, pets, wet pets, animal, nanoreef
2
2.0
Aug 18, 2021
08/21
Aug 18, 2021
by
Markus Hoffmann (HoffiDesign)
data
eye 2
favorite 0
comment 0
Hey there, I've made an fish feeding automat for my nano cube 30l. I'm feeding flak food,tablets and sticks for my shrimps and fishs. It is in use since 3 years and still works perfect. The feeder with 16 divisions can be filled individual. It is supplied through the arduino 5V micro USB. Every day when the time switch turns on the arduino is supplied and the feeder move 1 division forward. I use the same time switch, which although turns on my lights in the morning. For the Top of the Feeder...
Topics: fish_feeding, stl, automatic_fish_feeder, fishtank, thingiverse, fish_tank, fish_feeder, aquarium,...
3
3.0
Aug 15, 2021
08/21
Aug 15, 2021
by
Sam Ferlauto (Automate007)
data
eye 3
favorite 0
comment 0
Designed this Aerator Nozzle to naturally suck air and mix it with the waterflow coming out of the Juwel water filter. See pictures for final results. All you need is some standard air tube and a standard air regulator to adjust the amount of air bubbles you want to produce. No need for extra air pumps as it creates a vacuum and sucks it the air all by itself Print with your favourite black PLA @ 0.2mm layers, 3 shells, 7top and bottom layers, 100% infill . Takes me around an hour to print. NO...
Topics: air_bubble_nozzle, Hobby, aquarium_filter, aquarium, juwel, nozzle, Air_bubbles, fishtank, stl,...
2
2.0
Aug 15, 2021
08/21
Aug 15, 2021
by
Simon Adam (SPWA)
data
eye 2
favorite 0
comment 0
Made this to slip on Hardware 15mm pvc pipe for my aquarium to do auto water top off, its got spot for float level and ir level sensors, I'm using Leviathan reefpi.
Topics: marine aquarium, 3D Printing, aquarium, Leviathan, water level sensor, freshwater, fishtank,...
2
2.0
Aug 11, 2021
08/21
Aug 11, 2021
by
Dallas Shaefer (Arunk1)
data
eye 2
favorite 0
comment 0
Printed on an ender 3 v2 No major feat but this is my first 3D design. I’m new to keeping fish and was dissatisfied with using a siphon style gravel vacuum to keep things tidy. I made this adapter to join this particular power head, to a gravel vac. Add polyester fill which can be found at basically any hobby shop, and you have a continuous/filtered gravel vac. No more running out of water!...
Topics: DIY, aquarium, fishtank, fish, fish_tank, stl, thingiverse
3
3.0
Aug 6, 2021
08/21
Aug 6, 2021
by
Kendrick Towianski (KendrickT)
data
eye 3
favorite 0
comment 0
Pretty self explanatory, keeps floating plants in or out.
Topics: DIY, thingiverse, fish, plants, fishtank, stl, floating
4
4.0
Aug 4, 2021
08/21
Aug 4, 2021
by
Alex K. (blakskyy)
data
eye 4
favorite 0
comment 0
Inspired by Red Sea Reef Test Kits that include a titrator. Now you can use your Salifert test kits in a single-hand operation too! It works for all three Salifert Alkalinity Calcium Magnesium tests. How To Use: 1. Follow the directions for your test kit, which typically start with drawing water from the aquarium, and putting it into the vial. 2. Add drops to vial per instructions. 3. Snap vial into lower half of titrator. 4. Draw solution into syringe to specified line, then place syringe...
Topics: marine_test_kit, thingiverse, Red_sea, reef, aquarium, aquariums, reef_tank, marine_aquarium,...
4
4.0
Aug 1, 2021
08/21
Aug 1, 2021
by
Fred Staniga (fredsta)
data
eye 4
favorite 0
comment 0
SLO inlet for 50mm DWV PVC pipes. Used to fit over the outlet of fishtanks, has 6mm holes to exclude fish. Adjustable height. Print on flat end, with no supports.
Topics: thingiverse, aquaponics, Outdoor & Garden, fishtank, stl
3
3.0
Jul 30, 2021
07/21
Jul 30, 2021
by
Eric Mientus (KodOfWar)
data
eye 3
favorite 0
comment 0
Crashed TIE fighter! I made this as a request for a fish tank decoration. If you print it for this purpose, make sure it's fishy safe! Supports are required for this model. I set mine to 65% overhang. I used a .4 nozzle at .2 layer height, 60mm/s speed. I used zero infill with 5 walls, but you can print however you like! If you like what you see, please consider tipping! It will make my wife happy and I'll be able to keep designing without getting yelled at every day!
Topics: starwars, tiefighter, TIE_fighter, thingiverse, star_wars, darth_vader, imperial, fishtank,...
2
2.0
Jul 23, 2021
07/21
Jul 23, 2021
by
(etyrnal)
data
eye 2
favorite 0
comment 0
After being annoyed by being hit in the eyes by the aquarium light, whilst watching the fish, i finally designed curtains to slot into the same slots that the feet/legs slot into. To adjust the length, just measure the space between the light fixture legs, keep in mind your build volume size, and try dividing the total length of the distance between the lighting's legs by 3, 4, 5, 6, 7, etc until you get a size that's smaller than your maximum build volume. to get a number of even sized...
Topics: aquarium, curtain, finnex, thingiverse, fish, fishtank, Animals, fishtank_light, stl, fish_tank
2
2.0
Jul 16, 2021
07/21
Jul 16, 2021
by
Carl (cfeniak)
data
eye 2
favorite 0
comment 0
This is a filter modification for the fluval flex 15 gallon fish tank. It modifies the existing filter to direct flow more evenly through the mechanical filters and then down through the bio-media, making for much better utilization of the space. This design can hold greater than 4 times as much bio-media and allows for the use of filter floss as well for clearer water. It also maintain the ability to add activated carbon in the top right area if it is needed to remove medications.
Topics: flex, Fluval_flex, fish_tank, Hobby, fluval, stl, aquarium, fluval_filter, 15 gallon, filter...
2
2.0
Jul 5, 2021
07/21
Jul 5, 2021
by
Matt Santiago (BBQJedi)
data
eye 2
favorite 0
comment 0
Designed this to hold API test tubes for API fresh water or Marine test kits. There are 2 versions one for 4 tubes and one for 5 tubes. i designed it with a gap and small lip on the bottom section so the tubes can be inverted and used as a drying rack I think it works well. I printed them laying down as shown in the photo. I used tree branch supports, not sure how it will print with out supports. Sliced with Cura 4.8 with .2 layer height and a CHEP profile
Topics: Test Tube, Hobby, API, fish tank, stl, aquarium, fish, fishtank, thingiverse, aquarium maintenace
3
3.0
Jul 3, 2021
07/21
Jul 3, 2021
by
Hans-Jurgen Rausch (sq33qs)
data
eye 3
favorite 0
comment 0
A fish house for your aquarium fish. Print with at least 75% infill or it will float, ask me how i know. :) Scale to whatever you need.
Topics: Pets, cave, aquarium, stl, fishtank, fishhouse, thingiverse, hide
3
3.0
Jun 19, 2021
06/21
Jun 19, 2021
by
Cliff Cogger (CCPlusIT)
data
eye 3
favorite 0
comment 0
Clip on fish tank clips to fit 6mm thick glass and support the tank lid cover
Topics: stl, thingiverse, Pets, fish, fishtank, aquarium, clips
3
3.0
Jun 9, 2021
06/21
Jun 9, 2021
by
Danny Crossen (dboymuthafuqa)
data
eye 3
favorite 0
comment 0
Need custom shaped plant bases for your fish tank? This helps hide my lil' fry! Half circle included, sketchup file too, ask for custom shapes!
Topics: thingiverse, fishtank, Decoration, Other, stl, fish_tank
2
2.0
Jun 5, 2021
06/21
Jun 5, 2021
by
Matthias Kaufmann (emmka)
data
eye 2
favorite 0
comment 0
Ich habe dieses Gestell für den Futterautomaten Rondomatic 400 entworfen, damit das Kondenswasser nicht in die Futterschalen gelangt. Er ist leicht von der Deckelöffnung nach hinten versetzt und ca. 10cm über der Futteröffnung. Funktioniert bei mir ganz gut. Damit er leichter zu drucken ist, habe ich ihn in Einzelteile zerlegt (die Datei "Beine.stl" bitte 3x drucken). Bei mir hält er auch schon zusammengesteckt, kann aber auch noch verklebt werden. Viel Spaß damit. I designed...
Topics: Automatic, fishtank, fish, thingiverse, feeder, fish_tank, aquarium, fish_feeder, Pets, aquariums,...
6
6.0
May 28, 2021
05/21
May 28, 2021
by
Jay PrintnPlay (jay_printnplay)
data
eye 6
favorite 0
comment 0
There are about 10 kinds of accessories for all-in-one covers that make 20 cubes an all-in-one fish tank. Make an automatic replenishment bottle and aquaponics bottle with a 3D printer. Check out the video below for more information. ** All accessories in this video are for the all-in-one cover of the previous modeling STL Link(for PLA) : https://www.thingiverse.com/thing:4871506 STL Link(for ABS) : https://www.thingiverse.com/thing:4842091
Topics: aquaponics, fishtank, fish, water_bottle, thingiverse, fish_tank, Pets, aquarium_filter, stl
3
3.0
May 27, 2021
05/21
May 27, 2021
by
Jay PrintnPlay (jay_printnplay)
data
eye 3
favorite 0
comment 0
Make an all-in-one cover with a filter, lighting, and heater with a 3D printer. You can pull off a lot of filter and clean layout even in a 20 cube fish tank! ** A few notes - If you have a small fish (about Guppy), you must use a free filter at the entrance. One of them was sucked in but couldn't get out of it by his own strength, so he took it away. - When the lid touches water, it bends slightly. (Final modeling changes from 2mm to 3mm) - If the inlet is turned too tight or under pressure in...
Topics: AIO, fishtank, thingiverse, aquarium, Pets, aquarium_filter, stl
3
3.0
May 17, 2021
05/21
May 17, 2021
by
Joshua Guillory (JagwireJ)
data
eye 3
favorite 0
comment 0
Had some houseplants I wanted to grow out in my 45 Gal aquarium, so I made these to help hold the leaves above the tank lid while still allowing the roots to sit in the water.
Topics: aquaponics, AquariumPlants, fishtank, fish, plants, thingiverse, houseplants, fish_tank, aquarium,...
3
3.0
May 13, 2021
05/21
May 13, 2021
by
Elmar Goffin (Denqbar)
data
eye 3
favorite 0
comment 0
thanks for the great case and holder design. Remixed the clip to fit on my 6mm glass fishtank.
Topics: case, fishtank, fish, HC-SR04, thingiverse, 3D Printing, sr04, stl
3
3.0
May 11, 2021
05/21
May 11, 2021
by
Jon Skredlund (Skredlund)
data
eye 3
favorite 0
comment 0
Shrimp/small fish cave printed in PLA or PETG. I've used PLA in my tanks without any problems. Print with 100% infill or it wont sink. Be sure to get out the air bubbels between the pipes. If you still struggle to keep it down you can fill som gravel or sand in the bottom pipes alternative in the small gaps between the pipes. I've printed the cave many times without a brim, but if you struggle with bed adhesion this would help. The caves goes from 70-65-60mm in length. Internal diameter of the...
Topics: shrimp, fishtank, breeding, fish, shrimp_tank, shrimp_aquarium, thingiverse, fish_breeding,...
4
4.0
May 10, 2021
05/21
May 10, 2021
by
Jon Skredlund (Skredlund)
data
eye 4
favorite 0
comment 0
Shrimp/small fish cave printed in PLA or PETG. I've used PLA in my tanks without any problems. Print with 100% infill or it wont sink. Be sure to get out the air bubbels between the pipes. If you still struggle to keep it down you can fill som gravel or sand in the bottom pipes alternative in the small gaps between the pipes. I've printed the cave many times without a brim, but if you struggle with bed adhesion this would help. The caves goes from 70-65-60mm in length. Internal diameter of the...
Topics: shrimp, fishtank, shrimp_tank, stl, shrimp_aquarium, thingiverse, fish_breeding, fish_tank,...
3
3.0
May 3, 2021
05/21
May 3, 2021
by
Nate Ferris (MinnesotaMade)
data
eye 3
favorite 0
comment 0
This is a skimmer siphon, for 1/4" tubing and a 125mm diameter collection cup. This can be used to drain your protein skimmers collection cup - especially when it is not easily accessible. In my case, I cannot remove the collection cup easily after the system was built.
Topics: reef, fishtank, protein skimmer, thingiverse, aquarium, skimmer, aquarium_filter, Pets, tank,...
3
3.0
May 3, 2021
05/21
May 3, 2021
by
Wouter de Boer (JTCTitan)
data
eye 3
favorite 0
comment 0
Designed this skimmer to fit my Fluval FX6 standard hosing. Should be resizable to fit other hoses as well. Supports shouldn't be needed. Just connect to your intake hose.
Topics: aquaponics, FX6, fishtank, fluval, fish, filtration, thingiverse, Hobby, fish_tank, aquarium,...
3
3.0
Apr 24, 2021
04/21
Apr 24, 2021
by
3D Adventurer (3dadventure)
data
eye 3
favorite 0
comment 0
After breaking too many test tubes, I just have do this. You can check out how I use this thing in the video. https://youtu.be/el64KIbbcXg Here is the affiliate link I ordered the smaller cleaner from amazon. https://www.amazon.com/gp/product/B01N4LGBF3/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B01N4LGBF3&linkCode=as2&tag=3dadventure0c-20&linkId=c9994a7a42a95a058e4dcfd02a58966d Yes, it is supposed to look like CHEESE! Enjoy!
Topics: stl, fishtank, Household, fish_tank, thingiverse
4
4.0
Apr 16, 2021
04/21
Apr 16, 2021
by
Kirill Psarev (wrthg)
data
eye 4
favorite 0
comment 0
Check the images to confirm the style of algae scraper I use. Parasolid included if you wish to remix. I prefer to use a stainless steel algae scraper in my nano planted tank. The particular style consists of a standard square razor blade mounted between an angled plate and a retention insert. For safe storage I designed a protective cover that retains the scraper vertically, securing the blade to prevent accidental contact. To release, pick the blade upward and outward to unseat from the two...
Topics: stl, aquarium, planted, planted_aquarium, shrimp, marine_aquarium, shrimp_aquarium, nano_aquarium,...
4
4.0
Apr 9, 2021
04/21
Apr 9, 2021
by
Nathan Woodburn (NJWoodburn)
data
eye 4
favorite 0
comment 0
# This is a work in progress files might change Fish Feeder using a NodeNCM ESP8266 and a Stepper motor controlled via Google Assistant Components needed * NodeMCU ESP8266 Development Board * Stepper Motor and Driver (I used a 28BYJ-48 5V Stepper Motor with ULN2003 Driver Module) * External Button (Optional used for feeding without sending WIFI command) * Film Canister to hold fish food ###Fusion 360 files available [here](https://ql.nathan3dprint.tk/fish) ###Full code available...
Topics: stl, ESP8266, ESP8266_12-E, fish, feeder, Google_assistant, nodemcu, fishtank, arduino,...
4
4.0
Apr 5, 2021
04/21
Apr 5, 2021
by
Hagen Wolleb (Haggy_23)
data
eye 4
favorite 0
comment 0
Colombo Marine Iodine Test Aufbewahrungsbox In dieser Box lässt sich der Colombo Marine Iodine Test sauber verstauen, nach dem Abnehmen der Haube sind alle Teile inklusive Anleitung gut zugänglich und nichts kann umfallen. Colombo Marine Iodine Test Storage Box The Colombo Marine Iodine Test can be neatly stowed in this box, after removing the hood, all parts including instructions are easily accessible and nothing can fall over.
Topics: stl, aquarium, meerwasser, Iodine, fishtank, Jod, Wassertest, Organization, thingiverse, Colombo,...
3
3.0
Apr 2, 2021
04/21
Apr 2, 2021
by
Hans Kolberg (OrigenalHoneyBee)
data
eye 3
favorite 0
comment 0
this is a non restrictive pot plant pot for aquarium plants. it is made to put rough gravel on the outside and finer substrate with the plant in the middle. Print without support . all 3D printers that i know of are able to bridge the gap between slots.
Topics: stl, aquarium pot plant, Pets, fishtank potplant, Fish tank, thingiverse, slotted pot plant pot
6
6.0
Mar 20, 2021
03/21
Mar 20, 2021
by
Minh Dung Hoang (MinhDIY)
data
eye 6
favorite 0
comment 0
This is my design for an aquaponic filter that can be used for a fish tank. With this filter, the tank water is always crystal clear, the levels of ammonia, nitrite, nitrate are very low. Here's the link to the 3D cad design of the filter: https://grabcad.com/library/aquaponic-filter-for-fish-tank-1 For more instructions on how to build, install, and usage of the filter, please check this video: https://www.youtube.com/watch?v=hKlup6H0EtM
Topics: stl, aquarium, DIY, aquaponics, fishtank, aquarium_filter, fish_tank, thingiverse, goldfish
4
4.0
Mar 16, 2021
03/21
Mar 16, 2021
by
Derek Blash (Berchenal)
data
eye 4
favorite 0
comment 0
Meant for a Hygger HG-802 titanium aquarium heater and marina LED 20 gallon aquarium but will fit any heating tube 0.75" in diameter. I also coated it in low viscosity epoxy (thin coat) to ensure the PLA doesn't leach.
Topics: stl, aquarium, fish, heater, holder, hanger, fishtank, fish_tank, thingiverse, Pets
5
5.0
Mar 11, 2021
03/21
Mar 11, 2021
by
Peter Steinberger (Stonehiller87)
data
eye 5
favorite 0
comment 0
You will need the following components to complete it: 2x M3x16 screws 2x 3,5x16 Countersunk Screw 2x 3,5x16 Countersunk Screw 1x Universal Servomotor for central locking (must look like the one in the pictures, if 2 or 5 PIN doesn't matter) 1x ESP8266 (Like D1 Mini or Node MCU) with Tasmota Firmware 1x Relaisshield for D1 Mini 1x 5V USB Charger with 2,4A 1x USB A to Micro USB Cable 1x "JBL Click Dispenser" with various feed I posted everything at my GitHub Rep:...
Topics: stl, ESP8266, fish, Servo_Mount, feeder, automatic_feeder, fish_feeder, servo_motor, fishtank,...
