4
4.0
Mar 31, 2021
03/21
by
Carl Lalonde Dumoulin (cld_tech)
data
eye 4
favorite 0
comment 0
Sprayer nozzle for aeroponic watering. For 3/8 tubing. The reduced output area of the output head is an important factor to keep an uniform spray through all the length of the pipeline.. A fully open whole would need a ridiculous pressure to reach your last nozzle.
Topics: Outdoor & Garden, thingiverse, aeroponics, gardening_aeroponics, stl
8
8.0
Jan 15, 2021
01/21
by
David Niezabitowski (dniezby)
data
eye 8
favorite 0
comment 0
Grow tube segment designed to interlock to increase the height of the tower and add more plants.
Topics: gardening_aeroponics, thingiverse, hydroponics, aeroponics, stl, raintower, Other
13
13
Apr 23, 2021
04/21
by
Nathan Prayzo (NathanPrayzo)
data
eye 13
favorite 0
comment 0
Turns a HJ-311 submersible pump into a mini aeroponic system. The non-threaded end fits into the HJ-311 while the threaded end accepts most of the common aeroponic sprayers / misters. Credit to VeryWetPaint for the threaded piece which is simply a scaled version of one of the nuts from his "Magic Screw for Makerbot" upload.
Topics: hydroponic, hydroponics, Outdoor & Garden, gardening_aeroponics, stl, aeroponics, thingiverse
5
5.0
Jan 9, 2021
01/21
by
Matthew Hale (matthewhale)
data
eye 5
favorite 0
comment 0
I'm currently building a small hydroponics system and I got to thinking it might be good to raise the net pot in the PVC pipe I'm using for the system to give more room to roots as the plants grow. These 2" net pots fit in great in the pipe, but there is about 30cm of space that could be utilized after the plants root system gets longer, so I made a collar that fits in the end of the PVC fitting to raise up the net pot.
Topics: gardening_aeroponics, thingiverse, aeroponics, stl, hydroponics, indoor_gardening, gardening,...
3
3.0
Oct 14, 2021
10/21
by
Gregor Pisces (terminalObserver)
data
eye 3
favorite 0
comment 0
Created with openSCAD. Pods to fit in the Aero Garden(tm). I stuff these with peat and use my own seeds. Print vertically. Widest to plate.
Topics: Outdoor & Garden, openscad, thingiverse, aeroponics, pod, stl, gardening, pods,...
6
6.0
Apr 20, 2021
04/21
by
Nicholas Tripp (nicktripp)
data
eye 6
favorite 0
comment 0
This is a modification for the AeroGarden Harvest Classic model. This piece replaces the Harvest Classic's standard water port cover, allowing for two more plants to be grown. This takes the capacity of the harvest classic from 6 plants to 8. The design originates from the AeroGardenAddicts.com message board. Happy gardening!
Topics: thingiverse, indoor_gardening, stl, hydroponics, gardening_aeroponics, gardening, aerogarden,...
4
4.0
Mar 5, 2021
03/21
by
Ethan Fredsti (aracnoid149)
data
eye 4
favorite 0
comment 0
A cup used for holding plants grown in hydroponic systems. The cup is shaped in a way that most rooter plugs can be held easily and allow for root growth through the included holes.
Topics: aquaponic, stl, Outdoor & Garden, gardening, aquaponics, agriculture, aeroponics, plant,...
12
12
Apr 17, 2021
04/21
by
Cynthia Leaton (cleaton1)
data
eye 12
favorite 0
comment 0
As a mechanical engineer, I have been doing research into aeroponics systems (soilless agriculture). As I did research, I found that one of the biggest expenses are the nozzles utilized in these systems (close to $30 a piece!). So to cut down on cost, I threw the CAD files together and printed (including the threads). They work perfectly! Figured I would share for others who are running into similar issues. Both nozzles (Flat and full cone) are 1/4" NPT.
Topics: water, gardening_aeroponics, gardening, nozzle, hydroponics, thingiverse, stl, Sport &...
3
3.0
Apr 1, 2021
04/21
by
Brad Burger (ibad24)
data
eye 3
favorite 0
comment 0
AEROGARDEN STYLE GARDEN. LIGHT FIXTURE NOT INCLUDED. COMMENT IF YOU HAVE IDEAS ON HOW TO CONTROL WITH A ARDUINO. USES LIGHT TIMERS OR SMART HOME PLUGS FOR FOUNTAIN PUMP AND LIGHT. AIR IS ALWAYS ON. GLUE PORT INTO HOLE ON TOP OF LID. I USED A FISH TANK FILTER TYPE PUMP. WILL UPDATE PICTURES OF THE PROGRESS. (CBD HEMP USED FOR TESTING). NOT SUITABLE FOR LARGE PLANTS.
Topics: Outdoor & Garden, aerogrow, grow, hydroponics, aero grow, thingiverse, aerogarden, aeroponics,...
4
4.0
May 1, 2021
05/21
by
Ian Taylor (itaylorcsm)
data
eye 4
favorite 0
comment 0
https://www.thingiverse.com/thing:2403922 - link to original project by Archipelagourbanfarms Overview: The overall goal for this project was to allow the entire original project to be printable on an Ender 3 or any printer with the same/similar build volume. All I have done is essentially create a bucket and lid with the adapter for the tower. The lid was previously too large to print on my Ender3 V2, which has a 220x220x250 mm build plate. The lid is smaller, but the adapter is of course the...
Topics: stl, gardening_aeroponics, planter, remix, aeroponics, hydroponics, vertical_farm, garden, food,...
4
4.0
Jun 6, 2021
06/21
by
Evan Nguyen (evannguyen)
data
eye 4
favorite 0
comment 0
This is just a simple remake to allow for an ultrasonic atomizer to be placed at the bottom of the setup instead of a large water bucket. You can purchase an atomizer (aka mist maker) for just a few dollars online. I am about to test and see how high up the mist can go with just one atomizer, but so far I am guessing no more than 2 or 3 modules. Thanks to @archipelagourbanfarms for the wonderful original design.
Topics: verticle_hydrponics, modular_hydroponics, Outdoor & Garden, thingiverse, hydroponic, stl,...
15
15
Jan 11, 2021
01/21
by
Sam Sullivan (sullydog101)
data
eye 15
favorite 0
comment 0
Hydroponics miracle grow pod for growing plants in a hydroponic system. Works great with any system that uses miracle grow pods. Just put some grow medium, (I use paper towels, but rock wool would probably be ideal) into the pod with a few seeds and put it in the system. Also can be used to make your own system with a simple air pump, air stone, some tubing, and an opaque water container. Plant can either continue to be grown in the hydroponic system, or transplanted once the roots are thick...
Topics: plant, gardening_aeroponics, pod, thingiverse, hydroponic, stl, hydroponics, water, miracle grow,...
6
6.0
Mar 17, 2021
03/21
by
Nicolas Sicard (ninicksicard)
data
eye 6
favorite 0
comment 0
Donate to : paypal.me/NicolasSicard This design is to make hydroponics a one step process. you just put the seed in a masson jar full of water and nutrients and done.. The point is to remove the need for rockwhool or clay pellets. Right now the main issue is that nutrients might be bad for germination, so i'm trying to give the seeds a pocket of plain water where they can make roots, hopefully allowing them to reach the nutrients by themself. I haded a thin flexible cover to protect the roots...
Topics: aeroponics, selfWateringContainer, DIY_hydroponics, gardening, hydroponic, selfwateringplanter,...
12
12
Mar 21, 2021
03/21
by
Roy Pogue (Taikodragon)
data
eye 12
favorite 0
comment 0
2" Aquaponics/Hydroponics Venturi that I made using Tinker CAD please feel free to modify and improve it couldn't find one this size or design so I made it. Design is intended to draw in air and oxygenate the water in either a deep water culture or hydroponics set up
Topics: indoor_gardening, stl, venturi_pump, 3D Printing, DIY_Garde, urban_garden, venturi, aerator,...
8
8.0
Mar 5, 2021
03/21
by
Molequlab // (molequlab)
data
eye 8
favorite 0
comment 0
Voronoi inspired Net Pot/Planters for our Xoodo Pöd system but can be used universally (also IKEA Vaxer) Size : 68x68 mm *do check out the overall concept of this design,our aim is to automate agriculture as DIY and home/indoor, as possible. Donations might make this happen faster. No pressure :) Xoodo Pöd https://www.thingiverse.com/thing:3433978 and... *not a remix but inspired by an exercise of ode to this fabulous design. kudos https://www.thingiverse.com/thing:523289
Topics: 3dponics, plants, gardening_aeroponics, thingiverse, fog, net, fogponics, diy, home, food, modular,...
9
9.0
Jun 10, 2021
06/21
by
Jean-Marie Astruc (J-Max)
data
eye 9
favorite 0
comment 0
I don't grow greens to feed the slugs which are any gardener's nightmare ! Rain and wind can be strong here and I wanted a trap with good protection of the beer reservoir. I wanted it to be secured into the ground to stand any weather. It would be great if that trap can be printed easily in one single step. I added a pair of tongs to don't waste beer or have any unpleasant little drinkers removal. It's slug's happy hour, enjoy !
Topics: indoor_gardening, indoor_garden, aeroponics, gardening, grow, outdoor, aquaponics_farm,...
5
5.0
Mar 20, 2021
03/21
by
3D Printler (3dprintler)
data
eye 5
favorite 0
comment 0
Allows any basic aquarium pump (air bubbler) to act as a water pump, cutting your energy consumption and energy bills drastically. Know how to make this part better? Let us know! Join the 3Dponics online community: http://goo.gl/hYtFsC
Topics: stem, growbox, 3d_print, 3D_printing, thingiverse, hydroponics, garden, stl, upgrade,...
