3
3.0
Mar 19, 2021
03/21
by
Christopher Combs (Machinist1944)
data
eye 3
favorite 0
comment 0
Use at your own risk. I am not responsible for any action or undertaking of your actions when using or making this device. First of all, this is an IDEA for a 3d printed stick grenade that is REUSABLE. All the models are done on tinkercad. The idea of this airsoft stick grenade came from the Thunder B grenade, but since a stick grenade does not have a spoon, then I would have to figure out a different system of puncturing out the co2 (8 gram) cartridge. I have designed this to where you will...
Topics: airsoft, Hobby, Grenade, thingiverse, airsoft grenade, hand grenade, stick_grenade, stl
9
9.0
Aug 11, 2020
08/20
by
Center for Accessible Technology in Sign
movies
eye 9
favorite 0
comment 0
ASL vocabulary
Topic: grenade
As an one man band experience, with a guitar, a mic and a Tascam 4-tracks recorder, i started to record my own music. Making music since 1989 with my other band, Killing Chainsaw, in 1991 i moved from my band city, Piracicaba to Londrina, were i live now. But to stay far away from my band is not so easy, so i started to work at home on new songs. After a month and a lot of songs recorded i made the first Grenade release, "A Child's introduction to square dancing", a tape with all...
Topic: Grenade
3
3.0
Jun 7, 2021
06/21
by
Kobus (Bombermann)
data
eye 3
favorite 0
comment 0
Prop Grenade, Hand, Fragmentation, MK2 Height: 116mm Spring: 5mm For the safety pin you can use a splitpin and keyring I did not print this.
Topics: Grenade, Fragmentation_Grenade, Props, thingiverse, stl, hand_grenade
8
8.0
Apr 24, 2021
04/21
by
Chris K (BlueFenix)
data
eye 8
favorite 0
comment 0
*UPDATE* The Frag Grenade pieces were threaded incorrectly so I uploaded another version of the Top to hopefully fix it. If you already have these files download, mirror either one in Cura or whatever software you use or redownload the Frag Top. Props of grenades found in Fallout 4. - Fragmentation Grenade - Cryogenic Grenade - Plasma Grenade - Nuka Grenade - Pulse Grenade Instructions for printing and assembly. *Fragmentation Grenade* The simplest print out. Main body and the sping loaded...
Topics: Pulse Grenade, Cryogenic Grenade, Plasma Grenade, stl, Prop, Fallout, Nuka Grenade, thingiverse,...
2
2.0
Jan 7, 2021
01/21
by
Julien R (ju_riken)
data
eye 2
favorite 0
comment 0
Double porte grenade 40mm, attaches pour passants MOLLE Largeur équivalente à 3 passants MOLLE Clip a imprimer sur la tranche pour plus de solidité au niveau de l'attache. Necessite 2 vis M4*30mm ////////////////////////////////////////////// Double 40mm grenade holder for MOLLE 3 MOLLE width Need 2 M4*30mm bolts
Topics: stl, Grenade, airsoft_grenade, airsoft, molle, grenade_40mm, Sport & Outdoors, thingiverse,...
8
8.0
Jan 15, 2021
01/21
by
Daniel Ponte (Danielman990)
data
eye 8
favorite 0
comment 0
Just a replica hand grenade i made as a movie prop, prints best split in half
Topics: thingiverse, stl, Grenade, replica_grenade, hand_grenade, Scans & Replicas
5
5.0
May 20, 2021
05/21
by
Francois Mutschler (Didgitalpunk)
data
eye 5
favorite 0
comment 0
a simple cap for airsoft grenades like the XM-PB4 from Madbull and all its copies. no support required, no raft required, but you can put one if you want. PRINT IN PLA. this is for airsoft. chances are you're using grenades outside, where BBs and parts like this aren't going to be picked up. PLA is bio-degradable. Bio-BBs are made of PLA. don't polute, keep it bio, and have fun!
Topics: Sport & Outdoors, 40mm_grenade_launcher, thingiverse, XM-PB4, airsoft, airsoft_grenade,...
3
3.0
May 1, 2021
05/21
by
Travis steiner (dribis)
data
eye 3
favorite 0
comment 0
THIS IS A SMOKE GRENADE THAT IVE BEEN WORKING ON. I HOPE YOU ENJOY THIS LITTLE CREATION OF MINE THANKS FOR VIEWING!!!!!!!!
Topics: stl, Grenade, SMOKE GRENADE, Props, thingiverse, PUBG
6
6.0
Jun 19, 2021
06/21
by
(legrobidon)
data
eye 6
favorite 0
comment 0
Summary Bonjour, C'est avec un grand plaisir que je partage mon dernier travail que j'ai nommé le Z40. C'est un lance grenade de 40 mm que j'ai créé entièrement tout seul avec mon niveau amateur. Bien sur , interdit à la vente sous peine de poursuites pénales. Je partage gratuitement mon travail de passionné. Vidéo rapide de présentation : https://www.youtube.com/watch?v=bOZT-Xg9hlc Vidéo astuce montage : https://youtu.be/ivHj-hlPuMI Matériels requis: 2 boulons tête fraisée de 4x40...
Topics: 40mm, launcher, Z40, Grenade, thingiverse, lance grenade, stl, airsoft, grenade launcher
3
3.0
Apr 1, 2021
04/21
by
40mm Airsoft (thehex)
data
eye 3
favorite 0
comment 0
This is an airsoft projectile used in 40mm systems like the m203 launcher. This was designed with some rifling in the center of the projectile to give it more stability in flight. This projectile requires a rifled sleeve insert in the replica barrel. It is compatible with other systems like the TAG launching shells. This projectile is 3d printed out of TPU (Thermoplastic Polyurethane), it has been designed for the top half of the projectile to collapse on impact. This means the projectile is...
Topics: 40mm, airsoft, Sport & Outdoors, grenade_launcher, thingiverse, airsoft_grenade, stl, Grenade
2
2.0
Nov 8, 2021
11/21
by
Michael Hackl (oisxeng)
data
eye 2
favorite 0
comment 0
This model is the perfect size for long durability and under 1 joule.
Topics: stl, handgrenades, airsoft_grenade, airsoft, bbs_grenade, thingiverse, DIY, nade, grenade
2
2.0
Jun 19, 2021
06/21
by
Jairo Ernesto Sánchez Galvis (jesanchezg)
data
eye 2
favorite 0
comment 0
Es. Diseno tomado inicialmente del modelo ERAZ https://www.thingiverse.com/thing:3739104, y adaptado para la granada mecânica de impacto T238. es gratis. diviértete imprimiendo! En. Design initially taken from the ERAZ https://www.thingiverse.com/thing:3739104 model, and adapted for the T238 mechanical impact grenade. it's free. have fun to Print!
Topics: Sport & Outdoors, Grenade_holster, Grenade, thingiverse, T238, airsoft_accesories, stl,...
1
1.0
Jul 22, 2021
07/21
by
Naor Livne (cypher0)
data
eye 1
favorite 0
comment 0
40mm grenade prop, noting fancy.
Topics: 40mm_Grenade, Grenade, airsoft, Hobby, stl, thingiverse
1
1.0
Jan 19, 2022
01/22
by
A. G. (Die_Bastelkammer)
data
eye 1
favorite 0
comment 0
This is a printable version of a TAGinn PALADIN chalk round. It will work fine with this launch tube: https://www.thingiverse.com/thing:5189625 Print the capsule with 100% infill. Print the base with 20% infill. The total weight (without chalk) will be circa 22 Gramms if you print with PLA+.
Topics: airsoft_grenade, grenade_launcher, thingiverse, taginn, airsoft_accesories, airsoft, stl, Sport...
5
5.0
Apr 19, 2021
04/21
by
T M (TMarcel18271998)
data
eye 5
favorite 0
comment 0
A standalone grip for a limited run HFC pistol grenade launcher, might work for the Zoxna launcher if you use a longer rail than the one I used, www.thingiverse.com/thing:23185. Super glue the halves together, then super glue the rail on. Autodesk Inventor Ipt included
Topics: thingiverse, stl, airsoft_pistol, grenade_launcher, Grenade, airsoft_grenade, airsoft, Sport &...
2
2.0
Mar 15, 2021
03/21
by
ugo salvadori (Corporal_Blutch)
data
eye 2
favorite 0
comment 0
A simple 40mm Grenade Launcher for Airsoft game. All part Is easy printable. You will need 2 of this part (with symmetry) "Crosse" and "Garde Main" You will also need 6 of this parts "Ergo Rond" This gun is actually finished at something like 90%, I'm actually working on an improved version with new firing mecanism. A mounting Manual wil be released soon (But the mounting is basically very easy)
Topics: airsoft, Sport & Outdoors, thingiverse, airsoft_accesories, 40mm_grenade_launcher,...
6
6.0
Jun 7, 2021
06/21
by
Michal Krakovsky (krakovskeho)
data
eye 6
favorite 0
comment 0
PERIMETERS MIN. 3 !!! Use at your own risk.!!! https://youtu.be/fz3uPpVPtBI
Topics: airsoft_grenade, Sport & Outdoors, Grenade, airsoft_parts, thingiverse, airsoft, stl,...
3
3.0
Apr 12, 2021
04/21
by
Lee Cherry (onebitpixel)
data
eye 3
favorite 0
comment 0
Worms - Holy Hand Grenade of Antioch - Built-in LED wiring channel. - Print, w/o supports Assemble using snipped 1.75mm filament pins; glue or fuse as needed. A drop of superglue was used to glue the gemstone covers onto the top of the LED. The Cross will press fit nice and snug into the holy hand grenade topper piece but feel free to glue/fuse if you want. - I used a simple wiring setup to house the battery and switch inside the hollow shape of the printed object. You hold it upright and it...
Topics: thingiverse, Props, grenade, worms, props, Antioch, stl, hand_grenade, holy_hand_grenade
9
9.0
Jan 12, 2021
01/21
by
Jose Garcia (presssa)
data
eye 9
favorite 0
comment 0
To turn the kimera into a wiretrap. It is not proven. Risk of rupture by force of the spring.
Topics: thingiverse, Hobby, stl, Grenade, kimera, airsoft, airsoft_grenade
4
4.0
Apr 5, 2021
04/21
by
arnaud meschain (Nanosor)
data
eye 4
favorite 0
comment 0
Here is a very simplistic 40mm grenade launcher. Works very well ! Need: - 3 pen spring - 3 wooden screws of diameter 3 cut to 9mm maximum - an M3 screw - 6 neodym magnets 6mmx3 The cover is held in place by the magnets. The stroke is adjusted by the central screw. The 3 springs press directly on the grenade. The magnets on the body side of the grenade launcher must remain protruding. ---------------------------------------------------------------- Voici un lance grenade 40mm très simpliste....
Topics: thingiverse, airsoft_grenade, 40mm, Grenade, grenade_launcher, airsoft, Sport & Outdoors, stl,...
5
5.0
Mar 16, 2021
03/21
by
Alejandro Reina (arj200404)
data
eye 5
favorite 0
comment 0
This 3D design is the body of a flash grenade would lack to put a battery a switch and LEDs. Este diseño 3D es el cuerpo de una granada flash faltaría poner una batería un interruptor y LEDs.
Topics: airsoft, airsoft_grenade, stl, thingiverse, Grenade, Other, nerf
7
7.0
Jun 20, 2021
06/21
by
Olivier Neble (Rainbowstrikes)
data
eye 7
favorite 0
comment 0
This is a prototype replacement shell for the Thunder B airsoft grenade, yhr filrt dimrntions fits perfectly on my grenade, just make sure to print the filet with a low layer high like 0.1/0.5 for a better seal/fit. You will need the best layer adhesion possible for obvious leakage prevention. Also, play with the infill and the shells amount to change the propreties of the grenade but avoid printing only one shell, it will never explode. I NEVER TESTED THE SHELL, IT CAN WORK OR GO VERY BAD,...
Topics: coque, thunder b, Grenade, thingiverse, stl, airsoft, grenade shell, shell, coque grenade,...
1
1.0
May 1, 2021
05/21
by
Rauno Arulaane (RauntsEsT)
data
eye 1
favorite 0
comment 0
its quite robust you can figure it out use your own settings you probably blow it up anyways. You can add BB inside of the grenade. To get it work youl need Matches and match striker and firecrackers. 1. add BB in shell 2. Add firecracker 3. Screw the cap on so the ignitor is in the middle hole. 4. Slip the striker from match box in the cap it should go quite far. 5. push few matches in on top of the hole where the striker is and feel if it has good contact. It should be ready to make a bang...
Topics: stl, Grenade×, Airsoft Grenade, Other, thingiverse, #Airsoft
2
2.0
Jan 5, 2021
01/21
by
Andrey Demyanyuk (Andrew357)
data
eye 2
favorite 0
comment 0
full-working Grenade
Topics: 3D Printing, stl, Grenade, explosion, thingiverse, hand_grenade
2
2.0
Mar 15, 2021
03/21
by
Robin Springett (McKrats)
data
eye 2
favorite 0
comment 0
A model of a Vulcan Grenade popular with the B.P.R.D. This is based on the prop version used by Hellboy at the end of the first movie to finish off Behemoth. Unlike most of my prints, this needs supports. Tolerances are a little loose but I wasn't really in the mood to fiddle with test prints.
Topics: thingiverse, hand_grenade, Props, Grenade, hellboy, stl, hellboymovie
13
13
Jan 11, 2021
01/21
by
Laimis Mic (gfun)
data
eye 13
favorite 0
comment 0
Just small grenade for airsoft. 40x40 mm high
Topics: thingiverse, Hobby, stl, Grenade, Airsoft_accessories, hand_grenade, airsoft_accesories, airsoft,...
4
4.0
Jun 7, 2021
06/21
by
eddie poggi (legrobidon)
data
eye 4
favorite 0
comment 0
Bonjour, lorsque j'ai conçu le Z40 certains joueurs m'ont fait la remarque et à juste titre que la poignée était trop horizontale ...du coup j'ai redessiné un peu le truc que j'ai nommé le Z45. Comme toujours il est interdit à la vente sous peine de poursuites pénales. Je partage gratuitement mon travail de passionné. Liste des améliorations: - Poignée plus verticale - Réduction de l'espace entre le canon et le corps - Rajout d'un canon de 42mm pour les grenades plus grosses -...
Topics: grenade_launcher, Sport & Outdoors, Grenade, thingiverse, airsoft, stl, Z45, Z40, lance...
8
8.0
Jan 19, 2021
01/21
by
G.A. Van Der Baan (ginoadriano)
data
eye 8
favorite 0
comment 0
I wanted something cool to store my cables and earbuds in. So i figured, why not a 40mm Grenade. Might need some scaling to fit into an actual launcher (for cosplay purposes). Designed this in Fusion360, modelled after a M406 type grenade.
Topics: Grenade, thingiverse, Airsoft, 40mm_Grenade, cosplay, Props, stl
7
7.0
Jan 16, 2021
01/21
by
Jon Mc (security0051)
data
eye 7
favorite 0
comment 0
3d printed grenades, no support required, pull the pin and throw the spoon will spring up like a real grenade! looks and feels good and is full size 1-1. I got the idea from XDr4gonx's grenade so i feel i should mention him and say thanks for his input as the larger grenade is almost identical. Larger grenade is hollow, m10 is solid so feels heavier but both are rough and heavy in hand. 1) glue the spoon together as shown in diagram. 2) put 2 small screws through the nearest hole and lightly...
Topics: XDr4g0nX, hand_grenade, Grenade, thingiverse, 3D Printing, stl
1
1.0
Jan 18, 2022
01/22
by
Joshua Erickson (Redhairing326)
data
eye 1
favorite 0
comment 0
This is a plasma grenade model created by OMNES_art and uploaded to sketchfab.com. I've converted it to an STL file and done nothing more. All credit for the creation of this model goes to OMNES_art. The model has been cut in half to all for printing without overhangs. Print both halves and superglue together. I haven't yet printed this myself so I don't have any recommended settings. https://sketchfab.com/OMNES_art
Topics: Plasma, thingiverse, plasma grenade, halo, stl, grenade, Props
5
5.0
Apr 2, 2021
04/21
by
Lucas Simon (LosSimonos)
data
eye 5
favorite 0
comment 0
This is the original F1 - Grenade from Rust
Topics: Video Games, thingiverse, Rust, F1 - Grenade, stl, Grenade
3
3.0
Apr 1, 2021
04/21
by
40mm Airsoft (thehex)
data
eye 3
favorite 0
comment 0
This is the sleeve used to launch the A01 40mm airsoft projectiles. To use this, install the sleeve in the barrel of an airsoft grenade launcher. You will need to drill a small hole through the barrel and sleeve and use a set screw (grub screw) to lock the sleeve into the right location. To position the sleeve, insert your largest 40mm airsoft shell then push the sleeve into the barrel until it touches the top of the shell.
Topics: 40mm, airsoft, Sport & Outdoors, grenade_launcher, thingiverse, grenade, stl
1
1.0
Oct 29, 2021
10/21
by
Drew Nix (Modelsharing)
data
eye 1
favorite 0
comment 0
This free model came from Turbo Squid by a user named CG VIEWPORT. https://www.turbosquid.com/3d-models/3d-rpg-7-gun-weapon-1365288 I simulated fire and smoke simulation with Insydium's product and then created mesh.
Topics: thingiverse, gun, Props, stl, rifle, grenade_launcher, Grenade, weapon
3
3.0
Jul 3, 2021
07/21
by
Renny Hayes (Jergling)
data
eye 3
favorite 0
comment 0
Just a quick chamber-filler for my ICS MGL-6. This is completely useless if your launcher fires cased ammunition. My forthcoming project is a way to launch caseless 40 mm projectiles from a 40 mm barrel using low pressure air. Hold on to your underwear, milsim weenies.
Topics: Toy & Game Accessories, airsoft, grenade_launcher, Grenade, thingiverse, stl
18,099
18K
Aug 5, 2013
08/13
by
www.toorabora.info
audio
eye 18,099
favorite 0
comment 0
the grenade war
Topic: the grenade war
2
2.0
Apr 4, 2021
04/21
by
Thomas Voisinet (GragonBreath99)
data
eye 2
favorite 0
comment 0
First Upload of my career, please give me feedback on what you think.
Topics: thingiverse, monty_python, Grenade, Props, stl, hand_grenade, funny
1
1.0
Nov 30, 2021
11/21
by
Kai Hirt (TI6815)
data
eye 1
favorite 0
comment 0
Designed in Fusion 360 and printed with TPU 1 mm Nozzle / 0,4 layer hight Happy Printing
Topics: Grenade, thingiverse, steampunk, hand_grenade, Props, stl, scifi, prop
7
7.0
Jun 19, 2021
06/21
by
(JoeZ5)
data
eye 7
favorite 0
comment 0
Summary This thing was made with Tinkercad. It is a dummy grenade with a belt holster. Edit it online https://www.tinkercad.com/things/6Hlj4QmE0RI
Topics: stl, thingiverse, Grenade
9
9.0
Jun 11, 2021
06/21
by
Tyros 87 (Tyros87)
data
eye 9
favorite 0
comment 0
Another more detailed German WWII hand grenade Scale 1:1 look at my other creations on WW2 grenades
Topics: replica, props, WWII, WW2, airsoft_grenade, stl, thingiverse, Grenade, Scans & Replicas,...
11
11
Jan 14, 2021
01/21
by
Nathan Preheim (Nate_The_Great777)
data
eye 11
favorite 0
comment 0
this is a simple grenade i whipped up in fusion 360 just for fun and to help me get better at using fusion youtube: N8 TH3 GR8
Topics: thingiverse, prop, flashbang, experiment, stl, explosive, Grenade, props, hand_grenade, Movie_Prop,...
7
7.0
Jan 17, 2021
01/21
by
Altair Ve (AltairV)
data
eye 7
favorite 0
comment 0
Wolfenstein: The New Order | Grenade Inspired on the concept art of Axel Torvenius Dimensions: 361 mm length 64 mm width This is part of the 12 days of X'mas of Grimworks. http://www.facebook.com/GrimworksMX Have fun XD See my profile here: https://www.myminifactory.com/users/AltairV
Topics: hand_grenade, Grenade, grenade_launcher, thingiverse, Wolfestein Cosplay, Cosplay, Wolfestein Prop,...
4
4.0
May 1, 2021
05/21
by
Max Maxim (Coolplex45)
data
eye 4
favorite 0
comment 0
- high poly - game ready - do with it whatever you want - if you want a 3d printable one comment
Topics: stl, hand_grenade, Grenade, game, Models, thingiverse, model, explosive
5
5.0
Jan 21, 2021
01/21
by
Javier Sanz (javisanz)
data
eye 5
favorite 0
comment 0
i added a ris to the original one:)
Topics: Grenade, grenade_launcher, airsoft, thingiverse, Toy & Game Accessories, stl
4
4.0
Apr 4, 2021
04/21
by
André Vieira (AVieira)
data
eye 4
favorite 0
comment 0
The objective of this project was not to out perform the commercially available spring grenades, let alone the gas ones. It was mainly to test the concept and make a working airsoft spring grenade that doesn't use trap doors. That said, I'm happy with the results and excited to share with you. You can follow this video for specs, know how it works and assemble the grenade: https://youtu.be/gOvhrMRbbZ8 The performance of the grenade is heavily linked to the springs, I wouldn't go higher than...
Topics: thingiverse, spring, Grenade, Sport & Outdoors, airsoft, stl, hand_grenade
3
3.0
Apr 20, 2021
04/21
by
Josef Kiselica (kihope)
data
eye 3
favorite 0
comment 0
Airsoft granade mold use gypsum or any soft material - at your own risk CHANGELOG: 11.04.2019 - random hole in middle aand other holes offset fixed
Topics: thingiverse, stl, props, hand_grenade, airsoft_grenade, airsoft, Props
2
2.0
Mar 31, 2021
03/21
by
Miikka (mcmik3)
data
eye 2
favorite 0
comment 0
Holster for Airsoft Innovations Tornado 2. Print the body on its side with supports. 2x M4x8 countersunk screws required. ABS recommended.
Topics: Tornado2, airsoft, thingiverse, Airsoft_innovations, grenade_molle, grenade_holder, grenade, Toy...
1
1.0
Jul 25, 2021
07/21
by
Steven Angrignon (Asazie)
data
eye 1
favorite 0
comment 0
Was looking for a Grenade launcher for a "counts as" Airbursting Fragmentation Projector and couldn't find one, so i made this Mash-up of: https://www.thingiverse.com/thing:4250330 (metroplex 80s toy upgrade warp cannon by Redfile) and https://www.thingiverse.com/thing:3923445 (Grenade launcher weapon 1:64 (Gaslands) by Runoved) Looks pretty decent on my crisis suits so far
Topics: thingiverse, tau, projector, Airbursting, warhammer40k, Grenade, AFP, stl, Fragmentation, Toy &...
5
5.0
Jan 21, 2021
01/21
by
Javier Sanz (javisanz)
data
eye 5
favorite 0
comment 0
a simple piece to make easier the reload :)
Topics: Grenade, grenade_launcher, airsoft, thingiverse, Toy & Game Accessories, stl
My Own Grenade is a Connecticut based hard rock/punk band. Founded in 1996, Tim Rooney (vocals), Mike Reid (guitar/vocals), Mike Testa (guitar), Chris Siano (bass), and Buddy Oberheim (drums) are dedicated to writing, recording, and performing original songs. My Own Grenade was voted the #2 punk band in the New Haven area in the 1999 Great Band Slam sponsored by the New Haven Advocate. After releasing our debut CD, Randal's Last Stand, we've been writing new material for our second release due...
Topic: My Own Grenade
