4
4.0
Mar 17, 2021
03/21
by
(-Josh-)
data
eye 4
favorite 0
comment 0
This is meant to cut the large size Command strip in half, put the half with the removal tail on your wall, and the other half on the hanger. holds a decent hat, doesn't leave a bump. This is drawn from scratch, so not a remix, but does take its queue from this: https://www.thingiverse.com/thing:2737682
Topics: hat, hat_hook, stl, thingiverse, hat_hanger, Accessories
2
2.0
Apr 1, 2021
04/21
by
(343guiltysparkhalo)
data
eye 2
favorite 0
comment 0
A wall holder for a 6 cell D battery ML300l maglite flashlight. This is the heaviest maglite so the holder should work for all of the big sized ones. Printed at 0.2 on an ender 3 with 30% cubic infill using cura. Very strong. seems like it will tear out of the wall before the plastic breaks (i tried). Only hardware required is screws. I believe the head size was 9mm and the screw hole was 5mm
Topics: Holder, thingiverse, Maglite holder, ML300L, Tool Holders & Boxes, maglite, organizer,...
1
1.0
Nov 30, 2021
11/21
by
(3DSpenny)
data
eye 1
favorite 0
comment 0
I wanted a headphone mount that was discrete and didn't take up a lot of space. This mount is designed to fit into the [IKEA MALM Desk](https://www.ikea.com/us/en/p/malm-desk-white-60214159/) replacing one of the plastic end-caps on the inner side panel. Mount supports headphone bands up to **60mm** in width.
Topics: headphones, ikea_malm, thingiverse, headphone_hanger, office, Office, desk, ikea, stl,...
9
9.0
Jan 11, 2021
01/21
by
(3DWP)
data
eye 9
favorite 0
comment 0
I created this by converting a depth map image with lithophane software to a bas relief. I added a hole so it can be mounted to a wall. http://www.3dwp.nl
Topics: lithophane, sculpture, thingiverse, stl, wall_mounted, bas_relief, Decor, green man, Wall_Hanger,...
9
9.0
Apr 21, 2021
04/21
by
(3DWP)
data
eye 9
favorite 0
comment 0
I saw a great 123D Catch scan and wanted to make it 3D printable. I deleted the surroundings and made it solid, cut a flat base and added a hole in the back that supports a screw or nail so it can hang on the wall. The model was scanned by Timofey Nikanorov in Saint - Petersburg, Russia. The original file is here: http://www.123dapp.com/catch/bas-relief/4779137 http://www.3dwp.nl
Topics: thingiverse, stl, 123DCatch, 123D, wall_mount, bas_relief, meshmixer, 123D_Catch, statue,...
7
7.0
Apr 23, 2021
04/21
by
(3DWP)
data
eye 7
favorite 0
comment 0
I found a nice dragon head 3D scan by Glen Newman: http://www.123dapp.com/catch/dragon-head-clay/4983502 The scan was of only one side of the head so I decided to try the mirror option in MeshMixer - worked great! I duplicated the mesh and stitched the two halves, sculpted some parts of the head and added a neck. I merged the head with a trophy plate and added holes to it so it can be mounted to a wall. Simply hang it on two screws or nails, distance between the hole centers = 80 mm. I also...
Topics: dragon_head, dragon, 123D_Catch, 123D, wall_mounted, mount, trophy, thingiverse, stl, animal,...
10
10.0
Mar 21, 2021
03/21
by
(3DWP)
data
eye 10
favorite 0
comment 0
--> Edit 2015-09-26: I added a Dragon wall mount model, I merged the head to a plate that can be fixed to the wall like a ''trophy''. I used MeshMixer to edit the head a bit, I used the Make Solid tool, thickened all details to 1 mm and sculpted a few rough parts like inside the mouth (was blocky). The plate has two ridged holes in the back so you can hang this on the wall. Make two holes in the wall, 10 cm/4 inches apart and put in nails or screws, the holes in the model will keep the model...
Topics: stl, ornament, Wall_Hanger, meshmixer, trophy, 123D, wall_mount, dragon, Sculptures, wall,...
5
5.0
Jun 11, 2021
06/21
by
(3DWP)
data
eye 5
favorite 0
comment 0
Summary This is a remix of the Boxer Statue 3D scan: http://www.thingiverse.com/thing:348232 I edited the head to be able to hang on your wall with Meshmixer boolean function (http://www.meshmixer.com). http://www.3dwp.nl
Topics: dog, meshmixer, 3D_Scan, Wall_Hanger, thingiverse, animal, Artec, boxer, stl
3
3.0
Mar 20, 2021
03/21
by
(3DWP)
data
eye 3
favorite 0
comment 0
This is a 3D scan of a door lion, I made it 3D printable and into a wall hanger with MeshMixer and VisCAM Mesh. MeshMixer is free and available here: http://www.meshmixer.com. The Boolean opereations were done with VisCAM because MeshMixer isn't strong on those (yet?). The original files are here: http://www.123dapp.com/obj-Catch/Door-Lion/1083091 http://www.3dwp.nl
Topics: grotesque, 123D_Catch, stl, Wall_Hanger, wall_mounted, meshmixer, 123DCatch, 123D, Scans &...
4
4.0
Mar 20, 2021
03/21
by
(3DWP)
data
eye 4
favorite 0
comment 0
This is a remix of http://www.thingiverse.com/thing:154529 I edited the file so you can attach it to a wall by hanging the model on a nail or screw.
Topics: grotesque, ornament, stl, Wall_Hanger, sculpture, wall_mount, Sculptures, wall, thingiverse,...
9
9.0
Apr 22, 2021
04/21
by
(3DWP)
data
eye 9
favorite 0
comment 0
I wanted to test making a logo. I converted a picture to curves and saved that as an SVG, opened it in FreeCAD, converted it to DXF and edited that in SketchUp. The model can be put on a wall by hanging it on a screw or nail. http://www.3dwp.nl
Topics: thingiverse, batman_logo, stl, wall_mount, batman, Decor, batman_symbol, logo, wall_mounted,...
4
4.0
Apr 13, 2021
04/21
by
(3DWP)
data
eye 4
favorite 0
comment 0
This is a 3D scan of a bronze Angel sculpture, I found it here: http://www.123dapp.com/catch/bronze-angel/2971652 I fixed it for 3D printing and added a version with a ridged hole so you can hang it on the wall. I used MeshMixer (http://www.meshmixer.com) to edit the scan: fill holes, delete noise objects, scaling/orienting and some modeling with a smooth brush. http://www.3dwp.nl
Topics: thingiverse, statue, 123D, 3D_Scan, scan, Scans & Replicas, sculpture, stl, 123D_Catch, angel,...
9
9.0
Apr 21, 2021
04/21
by
(3DWP)
data
eye 9
favorite 0
comment 0
This metal lion head has been 3D scanned with an Artec Spider 3D scanner. It has three holes so it can be mounted to a wall. I downloaded the model and fixed it for 3D printing, it wasn't solid and had some minor errors. The original file is here: https://viewshape.com/shapes/v4ceqthpnyr
Topics: thingiverse, stl, scan, wall_mount, animal, Artec, lion, wall_mounted, Wall_Hanger, 3D_Scan, Scans...
9
9.0
Apr 21, 2021
04/21
by
(3DWP)
data
eye 9
favorite 0
comment 0
This a remix of a 3D scanned lion sculpture: http://www.123dapp.com/catch/Lion/4543560 I used the plane cut and fill holes tool in MeshMixer to select the head and added a ridged hole with VisCAM. Now the model can hang on the wall on a nail or screw. http://www.3dwp.nl
Topics: thingiverse, stl, scan, 123DCatch, 123D, grotesque, wall_hanger, wall_mount, meshmixer, 123D_Catch,...
3
3.0
Apr 13, 2021
04/21
by
(3DWP)
data
eye 3
favorite 0
comment 0
I found another door lion that was 3D scanned. I turned it into a model you can hang on the wall on a nail or screw. If you like this one, I have more of these on Thingiverse! I used MeshMixer, SketchUp and VisCAM to make this. I deleted some parts of the scan (surrounding area) and made it solid so it can be 3D printed. I cut out the middle circle and head but found it too thin so I added an outer ring for more body. The original scan is here, thanks for making the scan!...
Topics: thingiverse, 123D, 3D_Scan, scan, Wall_Hanger, Scans & Replicas, stl, animal, lion, 123D_Catch,...
8
8.0
Jun 6, 2021
06/21
by
(3DWP)
data
eye 8
favorite 0
comment 0
I found a nice 3D scan of a Vietnamese bas-relief of a tiger. 123D Catch scans aren't 3D printable because they are surfaces, no solids - so I put in some work to make this printable. I made the surface solid by adding a frame around it and merging that with the tiger relief, the frame has a ridged hole in the back so it can hang on a wall. The original scan by ''diedevanvree'' can be found here: http://www.123dapp.com/catch/Hanoi-tiger-Vietnam/4951899 http://www.3dwp.nl
Topics: stl, bas_relief, scan, Vietnam, thingiverse, Scans & Replicas, Wall_Hanger, Hanoi, BAS-RELIEF,...
3
3.0
Apr 8, 2021
04/21
by
(3DWP)
data
eye 3
favorite 0
comment 0
This an edited version of the giant Olmec head. I made a flat base, made it bigger and added a hole with a ridge on the back so you can hang it on the wall. The one in the picture is printed from ABS and painted with gold, copper, silver and black for a bronze like look. http://www.3dwp.nl
Topics: wall, statue, Ancient, face, meshmixer, scan, sculpture, colossal_olmec_head, stl, 123D_Catch,...
12
12
Apr 16, 2021
04/21
by
(3DWP)
data
eye 12
favorite 0
comment 0
This is a 3D scan of a sculpture of a lion's head on a Thames bridge in London. It was done with 123D Catch and the original by Edgar Davey is here: http://www.123dapp.com/catch/Lionhead/2339659. I used MeshMixer and VisCAM to edit the file, I deleted surroundings, filled holes, modeled some parts and made a hole in the back so the model can hang on a nail or screw. http://www.3dwp.nl
Topics: Scans & Replicas, 123D_Catch, 3D_Scan, animal, wall_mounted, meshmixer, thingiverse,...
3
3.0
Jun 12, 2021
06/21
by
(3DWP)
data
eye 3
favorite 0
comment 0
Summary I found a photogrammetry 3D scan of a winged skull and edited it for 3D printing - I made it manifold, modeled it and scaled it up. It also has a slot in the back so it can be mounted to a wall. Source: https://sketchfab.com/3d-models/winged-skull-photogrammetry-cf881e934b974618a266a6012ccf9525 https://www.3dwp.nl
Topics: skull, wall, Wall_Hanger, thingiverse, photogrammetry, scan, 3d scan, stl
3
3.0
Apr 8, 2021
04/21
by
(3DWP)
data
eye 3
favorite 0
comment 0
This is a wooden shoe that slides onto a cleat that you can print and attach to a wall. This is a remix of my 3D scanned wooden shoe (http://www.thingiverse.com/thing:341835) and the way the ''Faceted Modular Wall Planter'' (http://www.thingiverse.com/thing:401545) is mounted on the wall with a cleat. I used the cleat so this wooden shoe model is interchangable with the (future) models from 3DBROOKLYN. I like the idea so maybe I will make more models fit, that way you can change the look of...
Topics: wall, Decor, the_netherlands, wooden_shoes, holland, wall_mount, cleat, Wall_Hanger, clog, stl,...
4
4.0
Apr 8, 2021
04/21
by
(3DWP)
data
eye 4
favorite 0
comment 0
This is a remix of: http://www.thingiverse.com/thing:177349 The original file wasn't solid so I added a bottom and also a way to hang it on the wall. --> Edit 08-01-2014: I added a mirrored version
Topics: wall, wall_mount, stl, thingiverse, Wall_Hanger, Animals, Lizard, Gecko, animal
4
4.0
Apr 13, 2021
04/21
by
(3DWP)
data
eye 4
favorite 0
comment 0
This is a remix of: http://www.thingiverse.com/thing:765513 It's a 3D scan of a lion on a facade placed in Parque del Retiro, in Madrid, Spain. I edited the original file by deleting the back plate and side pieces, modeling it closed and filling the holes, extruding the back 1 mm and adding a ridged hole so it can hang on the wall. I used VisCAM and MeshMixer. http://www.3dwp.nl
Topics: thingiverse, statue, grotesque, 3D_scanner, 3D_Scan, Scans & Replicas, sculpture, wall_mounted,...
4
4.0
Apr 8, 2021
04/21
by
(3DWP)
data
eye 4
favorite 0
comment 0
This is a remix of : http://www.thingiverse.com/thing:18306 I isolated the round shape with the lion head (original wasn't printable) and added a hole with a ridge on the back so the model can hang on the wall. http://www.3dwp.nl
Topics: head, grotesque, wall, lion, wall_mount, 3D_Scan, scan, sculpture, stl, thingiverse, Wall_Hanger,...
3
3.0
Apr 14, 2021
04/21
by
(3DWP)
data
eye 3
favorite 0
comment 0
This is a 3D scan of a sculpture of a man's head on a cannon. I edited the file with MeshMixer by cutting a flat plane as a base, deleting noise objects and sculpting some areas. I made the model so it can hang as decoration on the wall by adding a special ridged hole on the bottom/back. The original uploader and scanner posted it here: http://www.123dapp.com/catch/The-head-is-decorated-with-old-cannon/3869717 http://www.3dwp.nl
Topics: thingiverse, bronze, statue, 123D, 3D_Scan, scan, Scans & Replicas, sculpture, wall_mounted,...
3
3.0
Apr 13, 2021
04/21
by
(3DWP)
data
eye 3
favorite 0
comment 0
I found a nice Lion sculpture but it wasn't solid or printable. I used MeshMixer (free at http://www.meshmixer.com) to fill holes and used the ''Make Solid'' tool. I also oriented and scaled the model and added a ridged hole in the back so it can easily hang on the wall. The original file is here: http://www.turbosquid.com/3d-models/v-ray-render-max-free/841682
Topics: thingiverse, statue, grotesque, sculpture, wall_mounted, stl, animal, lion, Sculptures, meshmixer,...
8
8.0
Apr 27, 2021
04/21
by
(3DWP)
data
eye 8
favorite 0
comment 0
This is a John Deere logo plaque you can hang on a wall, I added two ridged holes in the back for a screw or nail (no support material needed). I also added a version with rings on the corners that can help against warping. https://www.3dwp.nl
Topics: thingiverse, John_Deere, Plaque, stl, Wall_Hanger, wall_mount, logo, Signs & Logos, wall_mounted
2
2.0
Jan 7, 2021
01/21
by
(3dprintaddict)
data
eye 2
favorite 0
comment 0
Made a Mount for my hats and threw in a wire hook to keep things tidy. I used these [3M Command Strips](https://geni.us/iKwy9) just peel and stick.
Topics: hat_hook, Organization, stl, hat_wall_hanger, hat, Headwear, Wall_Hanger, wall_hook, mount,...
3
3.0
Jan 5, 2021
01/21
by
(4cpus4me)
data
eye 3
favorite 0
comment 0
Workforce storage cabinets use these kind of strange pegboard hooks. This is a functional similar version that I created. It will need supports when printed with the smooth side down. Probably should use PETG or ABS for strength.
Topics: stl, workforce, pegboard, hook, thingiverse, DIY, hanger
4
4.0
Mar 19, 2021
03/21
by
(89fordf350)
data
eye 4
favorite 0
comment 0
I designed this because I was unable to use the hooks supplied with a new set of blinds because the door is hollow.
Topics: 3D, hanger, door, blinds, thingiverse, bamboo, household, Household, hook, stl
2
2.0
Apr 1, 2021
04/21
by
(90leprechauns)
data
eye 2
favorite 0
comment 0
This is a fancy belt hook for a buckler modeled off of a museum image I came across. I remodeled it quickly in fusion for use. It is currently sized as the scaled museum picture indicates, so for all reasonable belts, it will have to be scaled up. Currently monogrammed with the letters FF. If you need them removed and can't do it yourself shoot me a message.
Topics: Sport & Outdoors, thingiverse, buckler, Costume, hook, medieval, belt, HEMA, SCA, recreation,...
1
1.0
Dec 14, 2021
12/21
by
(AEhere)
data
eye 1
favorite 0
comment 0
A simple hook to hang headphones or anything else from the Artillery Sidewinder X-1. Print two rails and a hook, and assemble them on the upper horizontal bar.
Topics: Artillery_swx1, Artillery_Sidewinder, hook, stl, 3d_printer, Headphone, thingiverse, headphones,...
5
5.0
Jan 20, 2021
01/21
by
(AirFreak)
data
eye 5
favorite 0
comment 0
Made for everybody who does not want to glue or nail anything to the wall For a 20mm window board
Topics: Audio, headset_holder, headphone_holder, headphone_hook, Teufel, Headphone, thingiverse, teufel...
9
9.0
Jan 9, 2021
01/21
by
(Alchemaker)
data
eye 9
favorite 0
comment 0
After completing and using the (scraper holder) daily I decided to add something to the other side of my machine. It holds a hand-sized socket wrench for use with the leveling screws. This little guy has been just as handy so I thought I would post it.
Topics: thingiverse, stl, 3D Printer Accessories, monoprice_makerselect, socket_holders, tool_hanger,...
4
4.0
Apr 4, 2021
04/21
by
(Aldi)
data
eye 4
favorite 0
comment 0
It is an hanger based in a tree in autumn time. It was made in DM and it was cutted with lasercut.
Topics: thingiverse, percha, hanger, DM, Decor, stl, fabLAB, tree, lasercut, ESAPA
3
3.0
Apr 16, 2021
04/21
by
(AnomalousWorks)
data
eye 3
favorite 0
comment 0
Made to hang all standard electric guitars from wire shelving. It's designed specifically for the shelving I have, which is: http://goo.gl/ZvMtKp
Topics: wire_shelving, Organization, thingiverse, guitar, stl, wire_shelf, wire, guitar_hanger
3
3.0
Mar 21, 2021
03/21
by
(Arjen_Vrijlandt)
data
eye 3
favorite 0
comment 0
Printed 0,3mm layerheight. Fits a 28mm round rod. I also uploaded the SolidWorks (2013) files.
Topics: hanger, clothes, stl, clothes_hook, Jeans_Hanger, clothes_rail, furniture, mount, fashion, rail,...
4
4.0
Apr 12, 2021
04/21
by
(AssertiveWall)
data
eye 4
favorite 0
comment 0
This is a little laser cut towel rack. You can lay a little hand towel or dish towel over the ladder to let it dry. Feel free to check out more details on this project or other projects at my site: meanderinglaser.weebly.com enjoy :) EDIT: If you wanted to make this using a 3D Printer, you could make the mounting pieces and then use dowels for the bars (I used dowels for my bars anyway).
Topics: thingiverse, laser, Kitchen & Dining, laser_cutter, sink, Towel_Hanger, stl, towel_holder,...
6
6.0
Jan 16, 2021
01/21
by
(AutopsyTurvy)
data
eye 6
favorite 0
comment 0
I know this has sort of been done before, but I'd not seen any that were mounted quite like this, with no base, just a hand sticking out of the wall, with two small slots in the wrist for hanging with two small nails or screws. Handily (heh) holds whatever you need it to - I use it in the kitchen but it'd work for coats, scarves, hats, belts, etc. as well. Prints at approximately 8 cm high (as pictured) but you can scale it up or down for your needs - just be aware this will also scale the...
Topics: hook, thingiverse, Household, hanger, stl, hand
9
9.0
Apr 1, 2021
04/21
by
(BARA)
data
eye 9
favorite 0
comment 0
To Hang Stuff Up!
Topics: belt, makeentry, lasercut, closet, hanger, toy, experiment, cord, Tie_Rack, Wire_Rack, sketchup,...
2
2.0
Jun 11, 2021
06/21
by
(Bedelber)
data
eye 2
favorite 0
comment 0
Colgador para rail de ventanas correderas. Diseñado para poder colgar bolsas en la terraza aprovechando el rail de las ventanas correderas.
Topics: Organization, Colgador, hanger, thingiverse, colgador ventana, window hanger, stl
6
6.0
Jan 18, 2021
01/21
by
(BigRedButton)
data
eye 6
favorite 0
comment 0
Yet another headphone holder. Comes in two widths, 40mm and 60mm. Print sideways with support. Screw to be printed vertically with supports (could work without but I never tried)
Topics: headphone_holder, Headphone, thingiverse, Office, headphone_hanger, stl, headphones,...
2
2.0
Mar 15, 2021
03/21
by
(Bigjeffrey)
data
eye 2
favorite 0
comment 0
Thanks to NoycePrints for his amazing design https://www.thingiverse.com/thing:3534573. The only thing i did not like about it was, that the stand kept moving on my table so I remixed the feet so you can put a M3 nut in them and glue a small circle of TPU on them to secure them on the base. Print the file "TPU_Lower_Part.stl" in TPU and glue it with double-sided tape onto the feets. All other files can be downloaded from the original Thing:...
Topics: thingiverse, Headphone_stand, Audio, headphone_hanger, headphone_holder, Headphone, stl
5
5.0
Mar 16, 2021
03/21
by
(BlackjackDuck)
data
eye 5
favorite 0
comment 0
Tired of constantly lifting, moving, sorting lids as you grab and place your pans? This solution works beautifully to keep your lids out of the way but quickly accessible in the right place without having to reach to the back of your cabinet! I very much liked the idea of the pot lid holder, but definitely did not want to drill holes in our cabinet doors, so I just added a 3M mounting plate to the existing design (I'm a command strip junkie). No other modifications. This is the 1.5mm thickness...
Topics: Removable, sticker, kitchen, hook, 3M_Command_Strips, Kitchen & Dining, adhesive, stl, hanger,...
2
2.0
Mar 25, 2021
03/21
by
(Bobslee)
data
eye 2
favorite 0
comment 0
A simple tie hanger that can be hung on a regular clothes hanger with a horizontal bar.
Topics: stl, tie, thingiverse, hanger, clothing, Accessories, ties
5
5.0
Jun 20, 2021
06/21
by
(Boopidoo)
data
eye 5
favorite 0
comment 0
So now I've finally got myself the touch controllers and obviously had to make a design to mount them on a wall. :) I've tried a few of the ones on thingiverse but none were to my liking, either too clumsy or not secure enough. This one is small m, quick and easy to print without support, doesn't take up much space and offers a more secure way to mount your controllers on the wall. As always, if you find it useful a tiny donation goes a long way to show appreciation. :) EDIT: Upon request I've...
Topics: Games, rift, thingiverse, controller, touch, stl, hanger, wall, mount, oculus
2
2.0
Mar 25, 2021
03/21
by
(BrixSat)
data
eye 2
favorite 0
comment 0
Another coat hanger.
Topics: stl, thingiverse, hanger, coat_hanger, Accessories
6
6.0
Jun 12, 2021
06/21
by
(Budina)
data
eye 6
favorite 0
comment 0
Summary If you don't know where to hang and show off your headphones, this is a stilish model for it. It should fit on any 20×20×20cm printer. Print without supports.
Topics: headphone_holder, headphones, Headphone_stand, headphone_hanger, thingiverse, headphone_hook,...
2
2.0
Jan 4, 2021
01/21
by
(C6_Designs)
data
eye 2
favorite 0
comment 0
Awesome wall mount hanger for your audio gaming headset. Recommend mounting using 2 small screws, 3M VHB (Permanent) or 3M command strips.
Topics: headphones, stl, headphone, xbox, Wall_Hanger, holder, wall, mount, gaming, headset, Gadgets,...
5
5.0
Mar 16, 2021
03/21
by
(CDeviant)
data
eye 5
favorite 0
comment 0
Max tolerance for fitment is 3.5" wide, .5" thick. It likely will fit phones .125" thinner. It is specifically designed for the Huawei Ascend Mate 2, with case. Supports are needed for the overhang. 0.3 resolution worked fine. Should print in about 1hr 20min
Topics: Holder, Ceiling, Mate, Mount, smartphone, Hanger, phone, Wall_Hanger, Wall, stl, Organization,...
3
3.0
Mar 8, 2021
03/21
by
(CDeviant)
data
eye 3
favorite 0
comment 0
This is a helmet hanger designed to hold large motorcycle helmets, but it would work for smaller bicycle helmets great. I designed it so that it can be securely mounted on a standard 2x4 board. (1.5" / 3.5" inch) [Use 2 bugle head screws to fasten it to the board.](https://images.homedepot-static.com/productImages/a9040fbd-e704-46ac-b217-23713cfbc51f/svn/grip-rite-drywall-screws-114cdws1-64_1000.jpg) For example, if you have a shed or garage with no insulation and just bare wood...
Topics: wood, stl, thingiverse, Wall_Hanger, board, hanger, helmet, Organization
