11
11
Apr 1, 2021
04/21
by
(EATYone)
data
eye 11
favorite 0
comment 0
Shrthi1 is a marvelous DIY Synth from: http://mutable-instruments.net/
Topics: thingiverse, keychain shruthi1, synthesizer, Other, stl, keychain
3
3.0
Apr 24, 2021
04/21
by
(ES0602)
data
eye 3
favorite 0
comment 0
I decided it was about time to display all my Pez, not just the ones that came with feet, so I modeled and printed feet for modern remake Pez, vintage Pez, and even my Pez Keychains. These feet are very close to the size and shape of regular pez feet and will fit all of the Pez rail systems I've tried. I made versions that hold the dispenser in the usual position, and versions that hold them turned 90 degrees so they will display better (think the Valentines Hearts that display better sideways)...
Topics: Pez Stand, Pez dispenser, Toy & Game Accessories, Pez Keychain, pez, stl, thingiverse, Pez...
6
6.0
Mar 18, 2021
03/21
by
(EisenEber)
data
eye 6
favorite 0
comment 0
Hey guys, this is just another portable mini phone stand for your keychain. All you need is a keyring and you're good to go. There are to versions. One with an inner "fork" width of 9 mm (0.354 inch) and one with 15.5 mm (0.610 inch). Print it with 100 % infill to get the highest strength. You need a support for the tapered tail. I screwed this up and made a super sturdy support structure, which i could only remove by sanding. Don't make the same mistake (looked quite good after the...
Topics: smartphone, phone, Mobile Phone, stl, smartphone_holder, keychain, thingiverse, smartphone_stand
7
7.0
Jun 11, 2021
06/21
by
(Euan_Rundle)
data
eye 7
favorite 0
comment 0
Summary simple rock of ages keyring/chain. simply swap filament to change colour for writing or as you desire.
Topics: 3d_printer, keychain, 3D_keychains, keyrings, 3Dkeychains, ages, keyring, musical, thingiverse,...
1
1.0
Apr 20, 2022
04/22
by
(Extrutim)
data
eye 1
favorite 0
comment 0
A cable strap to keep all sorts of cables from turning into a big knot. My goal was to find a solution that could handle all sizes of cables. For small charging cables there are already many models, but large cables also knot quickly. But you can also use it for much more, e.g. tie tension belts together or hold your skis in place. I was surprised myself how sturdy the strap is, I was able to lift 10kg without the strap slipping or opening. The clamp is printed in place, you don't need...
Topics: place, cable_management, Household Supplies, bind, stl, binder, ties, ziptie, cablebelt, print,...
10
10.0
Jun 11, 2021
06/21
by
(ekul3e3)
data
eye 10
favorite 0
comment 0
Summary This is a Lego Christmas Ornament! It's a perfect Lego themed accessory that will be perfect for your Christmas. There is a hole in the top of the head to hang it on your tree. I know that the head will print off but I don't know about the body parts. I would use a real Lego body but it's know it is possible with support in case you want to scale it differently or something.
Topics: thingiverse, Lego_Man_Keychain, MakerBotOrnaments, stl
4
4.0
Mar 31, 2021
03/21
by
(elbarto919)
data
eye 4
favorite 0
comment 0
Improved version of surajgagnani's "key ring 2" (https://www.thingiverse.com/thing:3760517) with higher material thickness and smaller diameter. I included the Solidworks files, so you can modify it easier.
Topics: Replacement Parts, thingiverse, keyring, stl, keychain
3
3.0
Apr 1, 2021
04/21
by
(electrosync)
data
eye 3
favorite 0
comment 0
Have your own piece of Cardi B's WAP! Modelled from the WAP cover art.
Topics: thingiverse, Accessories, WAP, Keyring, stl, Keychain
8
8.0
Apr 2, 2021
04/21
by
(elizabethh)
data
eye 8
favorite 0
comment 0
Acrylic key chain with a field hockey player on it.
Topics: robot, thingiverse, field_hockey, new, 2D Art, name, model, fieldhockey, clear,...
5
5.0
Mar 13, 2021
03/21
by
(emnullfuenf)
data
eye 5
favorite 0
comment 0
This is a mashup of Hello Kitty and a Les Paul guitar's neck printed as a keychain. Sources: Hello Kitty: http://uncyclopedia.wikia.com/wiki/File:Hello_Kitty_logo.svg Les Paul: http://en.wikipedia.org/wiki/File:Paul_lespaul.svg
Topics: thingiverse, les_paul, keychain, hello_kitty, guitar, stl, Keychains
6
6.0
Mar 5, 2021
03/21
by
(engineers_alter_ego)
data
eye 6
favorite 0
comment 0
Front Facing Baby Chick Emoji Keychain
Topics: Baby Chick, stl, Emoji, Keychains, Chick, Keychain, thingiverse
11
11
Mar 13, 2021
03/21
by
(enjoinick)
data
eye 11
favorite 0
comment 0
I design this penny bottle opener b/c my favorite beer is 90min Dogfish Head and I really liked the Shark Bottle Opener by benglish: http://www.thingiverse.com/thing:14147 Also liked the design of the Pocket Coin-Op Bottle Opener by br3ttb: http://www.thingiverse.com/thing:11025 So added to the tail for the opening mechanism. Will be printing on Sunday, if you print before me let me know how it turns out!
Topics: bottle, thingiverse, solidworks, makerbot, penny, keychain, 3D, bottler opener, shark, beer,...
9
9.0
Apr 26, 2021
04/21
by
(ep150de)
data
eye 9
favorite 0
comment 0
I changed the thickness and scaled the part a bit. The original was too thin and might break. This is a remix of: http://www.thingiverse.com/thing:1665883 Any Logos/Tradmarks are property of Nintendo/Niantic
Topics: Coins & Badges, thingiverse, keychain, pokemon, stl, team_mystic, Pokemon_Go
5
5.0
Jun 11, 2021
06/21
by
(eprzybysz)
data
eye 5
favorite 0
comment 0
Summary A simple easy to print keychain for a great President. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .12/.20 Infill: 20%
Topics: keychain, thingiverse, Donald_Trump, Trump, stl
8
8.0
Jun 20, 2021
06/21
by
(eric_33)
data
eye 8
favorite 0
comment 0
- This is a custom Key Holder made for my set of keys. - The outer dimensions of the key slot is 27.28mm x 23.71mm x 2.1mm (length x height x depth) - Can be attached to a key ring.
Topics: keychains, DesignProject, thingiverse, key, pocket-sized, stl, engineeringproject, keychain, PLA,...
9
9.0
Jun 11, 2021
06/21
by
(eskeyaar)
data
eye 9
favorite 0
comment 0
Summary Jigsaw Puzzle, Added STEP file, so that you can change name. STL also included. How I Designed This Tell us more...
Topics: keychain, Jigsaw, thingiverse, puzzle, stl
5
5.0
Apr 4, 2021
04/21
by
(evenq)
data
eye 5
favorite 0
comment 0
This is something I made for my niece. It can be used as a toy, name tag, or a key chain. Turning the knob just rotates the name which I guess is kind of fun for kids. I'm sad that tinkercad is going away but here is the links to them anyways... Frame - https://tinkercad.com/things/a6N0B9Zjxkf-name-thingy-frame Inside Frame - https://tinkercad.com/things/gMlAPepju3h-name-thingy-inside-frame Knob - https://tinkercad.com/things/ktAAWkkTq5i-name-thingy-knob Example -...
Topics: thingiverse, Toy, Keychain, Name_Tag, stl, Keychains
8
8.0
Jan 17, 2021
01/21
by
3eixos xyz (3eixos)
data
eye 8
favorite 0
comment 0
print in quality 0.32mm
Topics: dogtag, keychains, customizer, dogtags, keychain, custom_keychain, thingiverse, Pets, customizable,...
9
9.0
Apr 27, 2021
04/21
by
E K (firebirdman)
data
eye 9
favorite 0
comment 0
A keychain that holds a full size SD card. The key ring acts as a stopper to keep the card from falling out. The 3x stl is there to make sure the model can be printed upright, as sometimes tall and skinny models have trouble staying attached to the print platform. EDIT 2017-07-28: I just uploaded a v2 of the model, after the keyring broke off my own card holder. The new version has more material around the hole to make it stronger.
Topics: Household, thingiverse, sd_card, keychain, stl, SD_Card_Holder
3
3.0
Apr 8, 2021
04/21
by
E M^2 (RF_Ataraxia)
data
eye 3
favorite 0
comment 0
Since there wasn't much vinesauce stuff in here, I did a simple one myself. I just used a decal I had and made it a 3D model with this site: https://image.online-convert.com/convert-to-svg There's a double-sided version for both things, and a flat one. Since I wasn't sure the things would need supports, I split them in half to print them twice and glue them together. Might wanna scale down the thing, though. They're huge.
Topics: Medal, Coins & Badges, stl, Keychain, Vinesauce, thingiverse, Vineshrooom, Coin, Token, Vinny,...
3
3.0
Apr 28, 2021
04/21
by
E M^2 (RF_Ataraxia)
data
eye 3
favorite 0
comment 0
I just added the other side. The empty part with the single green orb showing, like the actual thing! The model is kinda sloppy, but the flaws kinda don't show up in the print itself, so eh.
Topics: thingiverse, keychain, metabee, beetle, Medal, stl, medabots, Keychains
4
4.0
Apr 24, 2021
04/21
by
E S (blackguest)
data
eye 4
favorite 0
comment 0
# Razor v5 # I started with cwills75's "Retractable Razor Blade Utility Knife" which is a remix of the Talon V2 Utility Knife by HallPrecision. I made a series of modifications and I am now satisfied with my 5th redesign. I'm calling it "razor v5". This is now part of my EDC kit. The Razor v5 fits perfectly into my jeans' watch pocket. #WARNING# **Razor blades are sharp, so be careful! And if you do cut yourself, do not blame me!** # Features # Some of the features I added,...
Topics: hand_tools, utility_knife, tool, stl, Utlity, EDC, portable, keychain, tactical,...
4
4.0
Apr 4, 2021
04/21
by
E T (procione92)
data
eye 4
favorite 0
comment 0
A simple Mini Filament Spool Keychain, no need of glue for the assembly. A good idea to use the last waste of your spools. Post a make with your favorite colors!
Topics: thingiverse, toy, filament_spool_holder, PLA, keychain, spool_holder, 3D Printing, stl, filament,...
3
3.0
Mar 31, 2021
03/21
by
E. A. L. S. L. (movAxAx)
data
eye 3
favorite 0
comment 0
This is a highly customizable keychain in the form of a 2d projection of a basketball. All coded, as must be. There are three files: * basket.scad is the source code, you can modify it with OpenSCAD. * basket_only.stl is the 3d file without text. * basket_demo.stl is the 3d file with the a demo text (YOUR/TEXT/HERE). * yanina.jpeg Photo of a printed keychain with text YANINA. The module customKeychain() allows you to draw any number of texts in size 8, and scale the keychain but not the texts....
Topics: sports, keyrings, basketball, openscad, thingiverse, customized, basket, NBA, Keychains, keychains,...
8
8.0
May 1, 2021
05/21
by
E. Rauscher (IXPatch)
data
eye 8
favorite 0
comment 0
I wanted to create a smartphone stand keychain similar to Shira's (https://www.thingiverse.com/thing:1587568), and while I didn't use any of their models, I did use their idea. So thank you for your amazing work, Shira! I based this model off of the "Sleepy Wolf Plushie" item from Animal Crossing Pocket Camp. I had to modify and tweak it a lot, and destroyed its geometry in the process - so I ended up just remaking it in the end. Oh well. It's hard to see, but the model does have a...
Topics: stl, keychain, Animals, smartphone_stand, wolf, thingiverse, smartphone_holder, smartphone
3
3.0
May 1, 2021
05/21
by
E. Rauscher (IXPatch)
data
eye 3
favorite 0
comment 0
I used Wooloo's model from Sword & Shield and turned it into a smartphone stand / keychain.
Topics: stl, keychain, Wooloo, Toy & Game Accessories, pokemon, sheep, thingiverse, Phone_Stand
3
3.0
Apr 27, 2021
04/21
by
EDUARDO CAVALCANTE (EduhCosta)
data
eye 3
favorite 0
comment 0
Chaveiro de parede, feito com blender 2.82
Topics: thingiverse, keychain, stl, chaveiro, Decor
4
4.0
Mar 31, 2021
03/21
by
EK Design Lab (EK_Design)
data
eye 4
favorite 0
comment 0
This is a shell for USB sticks 4mmX12mmX42mm in total dimension. Just print and slide the USB in with a little hot glue. Note: it might be a tight fit and you may need a chisel depending on settings. Photos printed with 0.2mm nozzle @ 0.1mm layer height Please do not change file except for cutting/scaling to fit a larger USB. Thank you.
Topics: flashdrive, keychain, USB Steampunk, USD stick, flashdrive_holder, Gadgets, USB, gizmo, steam, stl,...
4
4.0
Jun 7, 2021
06/21
by
EK Design Lab (EK_Design)
data
eye 4
favorite 0
comment 0
This is a remix of my other USB https://www.thingiverse.com/thing:4088507 But it is modified to hold the insides of the popular USB sticks that have a metal loop that folds over the stick. (Pic 2)
Topics: Steam, flashdrive, USB Steampunk, steampunk, keychain, thingiverse, stl, flash_drive, steam_punk,...
4
4.0
Apr 13, 2021
04/21
by
ELF @T.K_DESIGN (TK_DESIGN)
data
eye 4
favorite 0
comment 0
Unique! Orange Pi Keychain https://www.thingiverse.com/thing:2332145 Add 05/26/2017 SVG files
Topics: thingiverse, Raspberry_Pi, gift, keyring, Keychains, stl, keychain, keychains
11
11
Mar 12, 2021
03/21
by
ELF @T.K_DESIGN (TK_DESIGN)
data
eye 11
favorite 0
comment 0
2017 keychain 鍵につけて使ってます。7が折れそうですが折れません。
Topics: thingiverse, key, 2017_year, 2017, keychain, stl, Fashion
2
2.0
Jan 18, 2022
01/22
by
ELLE DAMSEY (its_araaaaaaaaaaaaa)
data
eye 2
favorite 0
comment 0
This cute keychain is a perfect but simple design for your next print.
Topics: thingiverse, Keychains, keychain, cheer, stl
7
7.0
Apr 20, 2021
04/21
by
ELTON WONG (nerdyviews)
data
eye 7
favorite 0
comment 0
I'm not sure if there's a cross-section of people who enjoy both 3D printing and K-Pop group Blackpink, but here are a couple of Blackpink keychains I made in Fusion 360. The first 3mm were printed with a black PLA filament, and the remaining 1mm was printed with pink filament after a color change on my Prusa.
Topics: thingiverse, stl, Keychains, keychain, Blackpink
3
3.0
Mar 2, 2021
03/21
by
ELTON WONG (nerdyviews)
data
eye 3
favorite 0
comment 0
"I can do this all day." Captain America shield keychain, designed to be printed with color layer changes. Reference the settings photo for where I made my layer changes. Happy Printing!
Topics: 3D_keychains, thingiverse, stl, keychain, captain_america, marvel, Keychains
3
3.0
Jun 21, 2021
06/21
by
ELTON WONG (nerdyviews)
data
eye 3
favorite 0
comment 0
Get ready for Ghostbusters Day with this GB logo keychain! Just change filament colors in the referenced photo. I ain't afraid of no ghost and happy printing!
Topics: thingiverse, ghostbusters, stl, keychain, 3D_keychains, Keychains
3
3.0
Jun 22, 2021
06/21
by
ELTON WONG (nerdyviews)
data
eye 3
favorite 0
comment 0
Happy Ghostbusters 2 Day! Party times! Just change filament colors in the referenced photo.
Topics: stl, 3D_keychains, thingiverse, keychain, Keychains, ghostbusters, ghostbusters_2
7
7.0
May 1, 2021
05/21
by
ELTON WONG (nerdyviews)
data
eye 7
favorite 0
comment 0
Justice League keychain! Filament color change above 2mm.
Topics: stl, keychain, Keychains, 3D_keychains, thingiverse, justice_league
4
4.0
Mar 18, 2021
03/21
by
ELTON WONG (nerdyviews)
data
eye 4
favorite 0
comment 0
Oh Snap! Infinity Gauntlet keychain based on the popular GIF! Printed the gauntlet with MatterHackers gold PLA with a color layer change at 3.2mm to MatterHackers black PLA. For best results, print the Infinity Stones at 90% scale so they fit in the Gauntlet. Stones 1-5 were printed with various Proto-Pasta HTPLA filaments. The Mind Stone was printed with Solutech yellow PLA. Follow the template for Stone placement as all stones are different shapes.
Topics: infinity_gauntlet, endgame, marvel, thingiverse, Keychains, Infinity_War, avengers, Thanos,...
2
2.0
Jul 22, 2021
07/21
by
ELTON WONG (nerdyviews)
data
eye 2
favorite 0
comment 0
Time Variance Authority keychains from the Loki TV series. Change filament color above 2mm. I've included 2 versions. One rectangular, and another with less background. Happy printing!
Topics: keychain, marvel, stl, 3D_keychains, Keychains, Loki, TVA, thingiverse
7
7.0
May 1, 2021
05/21
by
ELTON WONG (nerdyviews)
data
eye 7
favorite 0
comment 0
Remember the "other" Ghostbusters? While they weren't the more popular ones, they did come out first with a live action series in 1975 and a cartoon that actually released 5 days before "The Real Ghostbusters" did. But being first doesn't mean anything. They were still the Gobots to the Transformers. But I remember the cartoon, and enjoyed how silly is was. And here's some trivia, Peter Cullen was the voice of Eddie on the show! Anyway, in case you wanted to show your love...
Topics: stl, keychain, Signs & Logos, 3D_keychains, drink_coaster, coaster, thingiverse, ghostbusters,...
48
48
Aug 8, 2021
08/21
by
ELTON WONG (nerdyviews)
data
eye 48
favorite 0
comment 0
The Suicide Squad is out now so here's a keychain for you guys to print!
Topics: Suicide_Squad, thingiverse, Keychains, keychain, 3D_keychains, dc_comics, stl, the_suicide_squad
4
4.0
May 1, 2021
05/21
by
ELTON WONG (nerdyviews)
data
eye 4
favorite 0
comment 0
The new Captain America is getting no love. But in case you do like him (I don't) here's a keychain with his new logo. There are a lot of filament switches on this one, so I'm probably never printing this one again... ;P
Topics: stl, keychain, us_agent, captain_america, Keychains, 3D_keychains, thingiverse, marvel
11
11
May 1, 2021
05/21
by
ELTON WONG (nerdyviews)
data
eye 11
favorite 0
comment 0
MORTAL KOMBAT! The koaster I made a while ago was pretty popular so here's a matching keychain to go along with the release of the new movie! Just change the filament color above 2mm. You can print these at the same time as the koaster! Link to Mortal Kombat Koasters: https://www.thingiverse.com/thing:4767633
Topics: stl, keychain, Keychains, 3D_keychains, mortal_kombat, thingiverse
4
4.0
Apr 28, 2021
04/21
by
ELTON WONG (nerdyviews)
data
eye 4
favorite 0
comment 0
Avengers keychain! Designed to be printed with color layer changes. I printed the first 2mm with black, next .4mm with purple or red, and the remaining .4mm gold or silver, or whatever color combo you fancy! Happy printing!
Topics: thingiverse, keychain, marvel, stl, 3D_keychains, Keychains, avengers
3
3.0
Jul 23, 2021
07/21
by
ELTON WONG (nerdyviews)
data
eye 3
favorite 0
comment 0
Congrats to Black Widow for finally coming out and making tons of money everywhere! To celebrate, here's a Black Widow keychain and coaster (or action figure stand if you choose). Just change filament color above 2mm. Happy Printing!
Topics: Signs & Logos, black_widow, keychain, coaster, marvel, stl, 3D_keychains, thingiverse
0
0.0
Aug 14, 2022
08/22
by
ELTON WONG (nerdyviews)
data
eye 0
favorite 0
comment 0
This Infinity Gauntlet keychain is a mirror to my previous Nano Gauntlet keychain which you can find here: https://www.thingiverse.com/thing:5365691 This uses the same stones so you can print the same for both. Designed to print at .20mm later height, change filament color at 2.20mm And since they're mirrors of each other, you can potentially glue the backs to each other to make one keychain that's perfectly balanced.
Topics: Infinity_War, Keychains, infinity_gauntlet, stl, keychain, marvel, thingiverse, avengers, Thanos,...
0
0.0
Aug 15, 2022
08/22
by
ELTON WONG (nerdyviews)
data
eye 0
favorite 0
comment 0
It's the 3 year anniversary of Avengers Endgame! What better way to celebrate Tony Stark sacrificing his life than this nano gauntlet keychain! :P Snap away Thanos from the comfort of your pocket. :) I made an Infinity gauntlet keychain a while ago and always wanted to make an opposing nano gauntlet for it. 5 of the 6 Infinity stones are the same size so there is only one model for those, while the Mind stone is always depicted as slightly larger so that is a separate model. The stones can just...
Topics: Keychains, infinity_gauntlet, nano_gauntlet, stl, Iron_Man, keychain, thingiverse, avengers,...
3
3.0
Jun 11, 2021
06/21
by
ELTON WONG (nerdyviews)
data
eye 3
favorite 0
comment 0
Following up on my Transformers keychains, here are GI Joe & Cobra keychains! Just change the filament color above 2mm and every .4mm after that. Now you know, and knowing is half the battle. ;) And here's a link to those Transformers keychains: https://www.thingiverse.com/thing:4830986
Topics: keychain, 3D_keychains, Keychains, thingiverse, gijoe, cobra, stl
5
5.0
Mar 15, 2021
03/21
by
ELTON WONG (nerdyviews)
data
eye 5
favorite 0
comment 0
Scarlet Witch & Vision keychains to celebrate the release of WandaVision!
Topics: keychain, thingiverse, marvel, Signs & Logos, scarlet_witch, 3D_keychains, vision, stl,...
6
6.0
Jan 21, 2021
01/21
by
ELTON WONG (nerdyviews)
data
eye 6
favorite 0
comment 0
Here's an Ecto-1 license plate keychain I modeled in Fusion 360. There are two models, one with & one without a hole for a keychain. It's designed to be printed with different color layers. The first 2mm I printed with Solutech orange PLA. The top 1mm I switched to MatterHackers midnight blue Pro PLA. The keychain is about 75mm wide & 3mm thick. Happy printing & Who Ya Gonna Call?!?
Topics: Keychain, 3D_Keychain, Ghostbusters, thingiverse, Ecto-1, Ectomobile, Coins & Badges, stl
