25
25
movies
eye 25
favorite 0
comment 0
Reports on timely news stories, buzz stories, videos and watercooler topics being discussed in social media and the Internet.
Topics: allstate, corona, longboarding
Source: Antenna
109
109
movies
eye 109
favorite 0
comment 0
Reports on timely news stories, buzz stories, videos and watercooler topics being discussed in social media and the Internet.
Topics: allstate, corona, longboarding
Source: Comcast Cable
5
5.0
Mar 9, 2021
03/21
by
Shawn Jones (Helix921)
data
eye 5
favorite 0
comment 0
A bushing squish mould
Topics: stl, thingiverse, longboarding, 3D Printing
9
9.0
Jan 14, 2021
01/21
by
Austin Otto (tallaustin2276)
data
eye 9
favorite 0
comment 0
Aluminum longboard deck. Estimates put it at 8.4 lbs. Its still a work in progress
Topics: thingiverse, longboard, stl, skateboard, Other, longboarding
3
3.0
Jun 11, 2021
06/21
by
Linda de Waard (Lindiaan)
data
eye 3
favorite 0
comment 0
Easy to print standing up and .ipt file included for easy editing for different wheel sizes! https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: longboard, Household, longboarding, longboard_holder, thingiverse, stl
3
3.0
May 21, 2021
05/21
by
Jonathan Bryan (Stockpiles)
data
eye 3
favorite 0
comment 0
This is an attachment for a longboard paddle I've been working on, I haven't gotten to test it out yet as my printer is out of commission at the moment. The idea is that a standard size hockey puck should fit on the the bottom, and it'll slot onto a 1 inch rod. all holes are sized for 3mm diameter screws. I plan to update this further once I'm able to print and confirm whether it does the job or not.
Topics: Sport & Outdoors, longboards, thingiverse, longboarding, longboard, stl
4
4.0
Mar 9, 2021
03/21
by
Daniel Skoog (3D_Cre8or)
data
eye 4
favorite 0
comment 0
This is a simple and quick to print wall hook for a hanging a longboard to the wall. I used a 1/8 inch thick screw to mount it, which is a little under 4 mm for those using smart person units. I printed it on the side, which gave it better strength but made the curves and the screw hole look a little sloppy. However I imagine that it would be strong enough if you print it with the wall side facing the bed, which would make the holes and the curves better. If you print it this way, you may have...
Topics: longboarding, stl, thingiverse, longboard, longboard_holder, Organization
10
10.0
web
eye 10
favorite 0
comment 0
Silverfish Longboarding Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Silverfish Longboarding Wiki, wikisilverfishlongboardingcom,...
8
8.0
Jan 16, 2021
01/21
by
Karolis Audiejaitis (audizen)
data
eye 8
favorite 0
comment 0
Longboard flashlight holder. i leave autodesk file if you want change something. I use this flashlight: https://www.aliexpress.com/item/Blue-Portable-Mini-CREE-Q5-Zoomable-1200-Lumen-LED-Flashlight-Torch-Lamp-AA-For-Best-Price/32475166673.html?spm=a2g0s.9042311.0.0.nfhf3U
Topics: thingiverse, longboards, longboard, 3D Printing, stl, longboarding
9
9.0
Jan 10, 2021
01/21
by
Vincent Thibault (VinceTibo)
data
eye 9
favorite 0
comment 0
Those small parts will allow you to efficiently store all your bushings easily while allowing you to keep track of which bushing goes with which. It's also useful to see the height of the bushing by gauging the amount of threads left above the nut. Will fit the smallest street cones and the tallest barrels.
Topics: thingiverse, Sport & Outdoors, stl, bushings, storage, skateboarding, longboarding
3
3.0
Mar 26, 2021
03/21
by
Philipp Frey (deffysams)
data
eye 3
favorite 0
comment 0
Who dosn't hate wet shoes at the daily skate commute to the office? Therefore, I designed these great Rainguards. They are designed for Caliber trucks and (currently) 44mm wide centerset Wheels. I'll upload more variants over time. If you need a specific size combination, post it. I'll take care of it Caliber trucks are especially good here because of the square hangers. Further on there are just great trucks. Mabye I'll redesign it in future for the Slant mag trucks. If you plan to buy a new...
Topics: stl, thingiverse, Sport & Outdoors, longboard, longboarding, skateboard, skateboarding
6
6.0
Mar 18, 2021
03/21
by
Shawn Jones (Helix921)
data
eye 6
favorite 0
comment 0
A simple drill guide for drilling a hole for a dowel at a 120 Degree angle. This tool is great for making a DIY boardrack that's at a good angle for storage or displaying graphics.
Topics: skateboard, longboarding, skateboard_holder, Tools, boardrack, stl, thingiverse
3
3.0
Apr 1, 2021
04/21
by
Terence Oh (terenceoh8)
data
eye 3
favorite 0
comment 0
grahneric provided an excellent design that was too big for my 200x200x200 printer. This is a factor of the width of longboard wheels, and the print would not have been functional if I had merely scaled it down. I really liked the one-piece design, but realized I'll have to create a strong bar and joint if I were to use this design. Luckily, he provided the original Fusion 360 file with his Thing. I basically removed his original, sleek bar design, and placed solid 25x30x30 boxes at the base of...
Topics: longboard, Sport & Outdoors, thingiverse, longboarding, stl, longboard_holder
4
4.0
Jan 16, 2021
01/21
by
Colby Route (Croute2010)
data
eye 4
favorite 0
comment 0
Foot stop designed for a longboard. Slot is 0.2 inches wide.
Topics: Footstop, thingiverse, Sport & Outdoors, skateboard, longboard, stl, longboarding
85
85
movies
eye 85
favorite 0
comment 0
Topics: lily, nono, krieg, longboarding, russia, phil, julia, taiwan, haley
Source: Comcast Cable
12
12
Jan 12, 2021
01/21
by
Ondra Losenicky (Losicek)
data
eye 12
favorite 0
comment 0
Hi all :-) So recently I started my second big project. My girlfriend wanted longboard so I take it like Challenge :-D I borrowed longboard from my friend and start with measuring and then with modeling after week I had prototype and now I have final version witch I want to share with you :-) I will be prepare more desk for this so you can chose the right one. I have aluminium foundry so I use 3D printed parts like form for casting, but acc. to simulation XT20 could work too. But I didn't try...
Topics: Sport, thingiverse, Sport & Outdoors, Longboard, skateboard, stl, longboarding
83
83
movies
eye 83
favorite 0
comment 0
Topics: new orleans, longboarding, nono, krieg, julia, taiwan, russia
Source: Comcast Cable
7
7.0
Jun 11, 2021
06/21
by
(WoodenBrick)
data
eye 7
favorite 0
comment 0
Summary Longboard wall mount, for 80mm wheels. The part where the wheel fits in is 60mm in lenght. I uploaded the right side of the wall mount, you can mirror it for the left side. The triangle hole is just there to save you some printing time and a little bit of filament. You can't see the holes that much cause they are on the inside where the longboard will hang. The holes are 5.0mm and the top part of the holes are 8.5mm. so the screw head won't stick out. On the picture there are 3 holes...
Topics: longboard, longboarding, longboard_holder, longboard wall mount, thingiverse, longboards, stl
6
6.0
Jan 21, 2021
01/21
by
Dehmel (MeTheKing)
data
eye 6
favorite 0
comment 0
A full, 45 inch skateboard with built in grip tape (it's really a pattern built into the board, but it works). The actual board in the file is 4.5 inches, so you'll need to scale everything up by a factor of 10. The holes built into the board should fit standard trucks, but if they don't you can re-drill them. The board has several holes running through it laterally, so you can insert metal support rods into it. The holes should fit 5 mm rods, but depending on your printer's accuracy you may...
Topics: thingiverse, Sport & Outdoors, skate, diy, skateboard, skating, longboard, stl, longboarding
7
7.0
Jan 19, 2021
01/21
by
chris cornish (CWCDesigns)
data
eye 7
favorite 0
comment 0
This is the second variant of the skateboard wall mount I've designed. This one can be used with old and new school mounting hardware spacing and decks can also be hung sideways using two mounts. For bolt layout follow the link to my first version. https://www.thingiverse.com/thing:2813362
Topics: skateboarding, thingiverse, Household, skateboard, wall_mount, mount, longboard, stl, longboarding
9
9.0
Jan 18, 2021
01/21
by
chris cornish (CWCDesigns)
data
eye 9
favorite 0
comment 0
Skateboard wall mount. Use one on top set of holes or two for broken boards. Get fancy and print with wood pla and stain.
Topics: skateboarding, thingiverse, Household, skateboard, wall_mount, mount, longboard, stl, longboarding
6
6.0
Jan 20, 2021
01/21
by
Jason Allen (GIDEONkjv)
data
eye 6
favorite 0
comment 0
No drilling required!! I designed this for my nephew who loves to long board. The piece should fit most long boards. The center cutout is designed to fit right between the trucks. Get proper fitment and alignment and drill the two holes to fit your board. This mod attaches to the front most truck screws, but you will likely need 4 new longer screws to complete the mod.
Topics: skateboarding, electric_longboard, thingiverse, Sport & Outdoors, Longboard, longboards,...
3
3.0
Jun 19, 2021
06/21
by
Kristoffer Benjamin (kristofferbenjaminw)
data
eye 3
favorite 0
comment 0
Curved mount for shredlights SL-200, since it was missing from thingiverse :( A bit slimmer than others and lights sit securely. Also a bit shorter than the original. I sanded the bottom and used velcro to mount to helmet.
Topics: Helmet, Sport & Outdoors, Electric Skateboard, Longboard, thingiverse, Shredlights,...
3
3.0
Jan 4, 2021
01/21
by
Eric McPeak (EricMcPeak)
data
eye 3
favorite 0
comment 0
A pattern to mark and line up your mounting holes for trucks on a longboard. Print two and use a long level or square to ensure your pattern is lined up to each other. Use the arrows and notches to line up on a drawn center line on your board. Clamp down on board to mark and or drill the hole pattern. Has old school and new school hole patterns.
Topics: pattern, stl, skateboarding, skateboard, mount, longboarding, Trucks, longboard, Sport &...
4
4.0
Jan 4, 2021
01/21
by
Peter Somi (Peti96)
data
eye 4
favorite 0
comment 0
A customizable longboard holder made by me. It allows you to store your boards efficiently and spare some room in your garage. If you like it try it ;)
Topics: stl, holder, longboard_holder, skateboard, skateboarding, longboarding, longboard, Sport &...
4
4.0
Mar 5, 2021
03/21
by
(bula87)
data
eye 4
favorite 0
comment 0
I couldn't find anywhere in Spain correct pivot cups for my Bear Grizzly and Slant Longboard trucks, so I decided to print one. I am testing it for 3 weeks already and they are working very well. No signs of usage. Size: out: 19,6 mm in: 12 mm long: 14,95 mm Printed at 100% with FLEXISMART TPU.
Topics: bear, stl, pivot, Replacement Parts, skateboard, trucks, longboarding, pivot_cup, slant, longboard,...
9
9.0
Apr 16, 2021
04/21
by
Vincent Thibault (VinceTibo)
data
eye 9
favorite 0
comment 0
This is a quick functionnal very light and sturdy skate tool I modeled, enjoy!
Topics: skate tool, longboard, skateboard, longboard tool, thingiverse, stl, skating, Sport & Outdoors,...
3
3.0
Apr 28, 2021
04/21
by
Murtaza murt (murtaza911)
data
eye 3
favorite 0
comment 0
This is a remixed model, I modified it so I could mount my board with the bottom graphic facing out so I could hang the board up like a decoration when not in use. To mount to the wall I used some 85lb dry wall inserts, and 3" screws.
Topics: longboard, thingiverse, 70mm, skateboard, LANDYACHTZ, wallmount, stl, holder, longboarding,...
8
8.0
Apr 17, 2021
04/21
by
Vincent Thibault (VinceTibo)
data
eye 8
favorite 0
comment 0
Nice footstop with lots of interesting features, take a look and print away!
Topics: foot stopper, longboard, footstopper, thingiverse, footstop, stl, foot stop, long board, skating,...
3
3.0
Mar 24, 2021
03/21
by
Antoine Mariotat (antoinemariotat)
data
eye 3
favorite 0
comment 0
Door Sk8te Holder I designed this thing to mount my boards onto a door. No screws needed, just put-it onto, and that's it ! Fit for every board (skateboard, penny, longboard...) with a max Ø 76mm wheels and max 40mm thickness door... You won't be able to close the door until the bracket is mounted onto. For my case i don't care because the door stay always open... Fell free to remix the thing ;)
Topics: stl, longboards, thingiverse, pennyboard, longboard, skate, Sport & Outdoors, longboarding,...
8
8.0
Jan 19, 2021
01/21
by
Dane Carder (skatardude10)
data
eye 8
favorite 0
comment 0
These guys are great for reducing slop in your Torqueboards 218 trucks... getting closer to that precision truck feel, increasing stability and maneuverability. I don't know if they are sized exactly for Caliber trucks, but give it a try: it's a 5 minute print. If not, let me know or feel free to make changes as you see fit... Step file available here: https://a360.co/2qohfhU Video in action (on carpet mind you...): https://www.youtube.com/watch?v=RuKwQSMkZ4Y Thanks guys, have fun!
Topics: skateboard trucks, downhill, torqueboards, electric skateboard, caliber_trucks, nylon, thingiverse,...
3
3.0
Mar 26, 2021
03/21
by
nick las (liryx)
data
eye 3
favorite 0
comment 0
Roue pour transmission longboard electrique 36dents compatible avec les roues de longboard "slick revolution" 83mm Pour COURROIE DENTÉE SIMPLE 280-5M15
Topics: stl, thingiverse, Sport & Outdoors, longboard, electric_longboard, wheel, longboarding, wheel...
5
5.0
Mar 13, 2021
03/21
by
(Relentless)
data
eye 5
favorite 0
comment 0
Hello my fellow trekkers of the tarmac, my gentlemen of the grind, and my damsels of the downhill. For those of us who skateboard, risers in general can be a useful tool to reduce the chance or wheel bite, spread the stress from our trucks to our boards, or just account for more heavily cambered decks. However, until now you you've had to travel to the store and buy whatever they had in in stock, in whatever color they had in stock, and whatever size they had in stock. And if you wanted an...
Topics: Customizable, thingiverse, Relentless, skateboard, customizer, riser, useful, Customizer_Challenge,...
6
6.0
Jan 20, 2021
01/21
by
Kjetil (Itek)
data
eye 6
favorite 0
comment 0
This is my battery and electronics enclosure for my electric skateboard. I hope there are someone out there that can use my design as Im quite happy about it. Lithium cells: Turnigy 5000mAh. 12 cells total. See picture. ESC: Alien 120A 12S Oval Switch can be found on eBay. (I bought mine on Biltema). Search for "30A car switch". I mounted the enclosure to the board using flexible glue. It will fill the cracs between the board and handle the movements well when the board flexes. See...
Topics: battery_cover, battery_holder, electric_longboard, thingiverse, Sport & Outdoors, skateboard,...
2
2.0
Oct 29, 2021
10/21
by
Scott Fallick (Scottybtc)
data
eye 2
favorite 0
comment 0
This is a basic longboard I made. It takes 2 ends, 2 sides, and 1 middle. I made 3 spots for steel bars to run through the length. The bars would be 3/8", with 2 length 15" and 1 length 12". I haven't printed this yet, so I don't know about the settings, but I'm gonna try at .3mm height with 50% Infill (I think I'm high on the infill, but I'm using ABS). Thanks for checking this out and please post your makes if you print this!
Topics: motorized_longboard, thingiverse, longboard, skateboards, electric_longboard, skateboarding,...
7
7.0
Jan 20, 2021
01/21
by
Zbigniew Bober (WeirdCan)
data
eye 7
favorite 0
comment 0
I needed some wall hooks for my longboards and wanted to design them myself. So this is it, nothing to complicated but functional and not to boring. I guess... There are some decent single wheel mounts on Thingiverse, which means that you have to mount them leveled perfectly. The use less material, which is great, but the water level bubble being my archenemy made these designs not usable for me. ;-) And I added a plate wich can be mounted at the place, where the lower truck and therefore...
Topics: wall_mounted, Wall_Hanger, electric_longboard, thingiverse, wallmount, wall_hook, Sport &...
4
4.0
Jan 5, 2021
01/21
by
Constantijn Crijnen (der_coco)
data
eye 4
favorite 0
comment 0
In [my recent video](https://youtu.be/i-cWnR28jP4) I made a **carbon-fiber-reinforced cruiser** using some pretty nice tools. I pressed the wood into shape using an MDF mold which I formed on the CNC. Of course it's not normal to have an entire woodworking workshop at home, but if you have access to a CNC-machine, you can use the attached files to create your on mold. If not, then you could shape the mold with a rasp out of dense foam and use a vacuum bag to pressurize the mold. There are...
Topics: skateboarding, press, Sport & Outdoors, diy, woodworking, epoxy, veneer, longboarding,...
4
4.0
May 1, 2021
05/21
by
Philipp Murx (gubbel)
data
eye 4
favorite 0
comment 0
Minimalistic Board mount i designed to hold my boards flat on the wall. works equally well for tkp and rkp trucks, and wheels from 40-80mm. just mount it with 2 (4x~20mm) screws. I Printed these in PLA with 25% infill and haven't destroyed one yet even though one holds my heavy esk8 with sometimes another board thrown on top. If your wheels are larger that 80mm you'll need to scale it a bit taller i think.
Topics: stl, longboarding, electric_skateboard, motorized_longboard, mellowboard, skateboard, Sport &...
29
29
Jul 1, 2017
07/17
by
WCCC.TV
movies
eye 29
favorite 0
comment 0
Gnarathon 7 in Cameron Park
Topics: Texas, Waco, WCCC.TV, Waco City Cable Channel, Government Access TV, Community Media, PEG, Youtube,...
6
6.0
Oct 15, 2018
10/18
by
JOSE-MARIA MORENO GARCIA
movies
eye 6
favorite 0
comment 0
Celebrado en el canal del Arroyo de Valdespino de Madridejos www.buditch.com microVIDEOS www.youtube.com/playlist?list=PLC2126A6B1C415C1B SI ALGUIEN NO DESEA APARECER EN EL ÁLBUM POR FAVOR COMUNICALO A josemariamorenogarcia@gmail.com Autor: José-María Moreno García. Fotógrafo humanista y documentalista. Una de las mejores formas de conocer la historia de un pueblo es a través de sus imágenes; en ellas se conserva no sólo su realidad tangible, calles, plazas, monumentos, sino también...
Topics: Flickr, video, buditch, masterwave, 2012, moreno, jmmg, madridejos, toledo, fototeca,...
6
6.0
Mar 17, 2021
03/21
by
Malcolm_X (Malcolm_X)
data
eye 6
favorite 0
comment 0
wheel pulley for arbor freeride wheels 72mm 78A Their are 2 version: 1-is a small bearing fit (a hamer is handy best for pla and abs) 2-is a just fit (if you use strong filemant like nylon) you wil need: -2 standerd 608 bearing(like on every skate/longboard -1 spacer -4 3m 60mm srews and bolts I have over 200km on the pla versions with succes is use 5045 racestar motor and a 15t racestar motor pully
Topics: pulley, wheel pulley, belt, stl, boostedboard, skateboarding, 52mm_on_72mm, esk8, Meepo,...
5
5.0
Apr 20, 2021
04/21
by
Malcolm_X (Malcolm_X)
data
eye 5
favorite 0
comment 0
work with this item you only need longer screw make sure to use locktide https://www.aliexpress.com/item/New-Electric-Skateboard-Replace-Part-Sprocket-Chain-Wheel-DIY-Set-for-DIY-Electric-Longboard-Skateboard-Accessories/32836517915.html?spm=2114.search0604.8.3.4d9e3394QoP9dD other marketplaces also work just fine it's a general size gear ratio is 14T/27T or 1:1,95 works with 70/83/90mm flywheels and inspired on types only 97mm isn't tested yet with 2 extra speedrings it's possible on the...
Topics: thingiverse, electric_skateboard, evolve, evolve_skateboard, Flywheels, skateboard wheel,...
7
7.0
Oct 15, 2018
10/18
by
JOSE-MARIA MORENO GARCIA
movies
eye 7
favorite 0
comment 0
Celebrado en el canal del Arroyo de Valdespino de Madridejos www.buditch.com microVIDEOS www.youtube.com/playlist?list=PLC2126A6B1C415C1B SI ALGUIEN NO DESEA APARECER EN EL ÁLBUM POR FAVOR COMUNICALO A josemariamorenogarcia@gmail.com Autor: José-María Moreno García. Fotógrafo humanista y documentalista. Una de las mejores formas de conocer la historia de un pueblo es a través de sus imágenes; en ellas se conserva no sólo su realidad tangible, calles, plazas, monumentos, sino también...
Topics: Flickr, video, buditch, masterwave, 2012, moreno, jmmg, madridejos, toledo, fototeca,...
99
99
Jun 3, 2018
06/18
by
SCTV
movies
eye 99
favorite 0
comment 0
Scituate Summer Adventures: Longboarding SCTV Summer Correspondent Mike Pasini is spending his Summer in Scituate and taking viewers along for all his adventures around this great town!
Topics: Massachusetts, Scituate, Scituate Community TV, SCTV, Public Access TV, Community Media, PEG,...
72
72
Jul 8, 2016
07/16
by
NMTV
movies
eye 72
favorite 0
comment 0
The Push for Awareness campaign is gearing up for its second annual expedition. It is a 150-mile long trip done on longboards over three days to raise awareness for depression. It began last year created by friends Kyle Olson, Jake Bailey, and Lucas Hess, and has already made an impact.
Topics: Minnesota, Blaine, North Metro TV, NMTV, Public Access TV, Community Media, PEG, Youtube, North...
59
59
Jul 8, 2016
07/16
by
NMTV
movies
eye 59
favorite 0
comment 0
A trio of young men have created an unorthodox method to raise money and awareness for depression. This is the second year they have traveled from Duluth to Blaine on skateboards, over a period of just three days.
Topics: Minnesota, Blaine, North Metro TV, NMTV, Public Access TV, Community Media, PEG, Youtube, North...
Montage of snippets and grooving tunes for aural funtimes ergo: KDon reporting on Longboard hockey, Fr. Unabonger hi-jacking at Mind Camp, cut thumbs from bong building, Gord Downie's Canadian Geese, neon lights, Charles Lloyd & Rocket Man. Note: Headphones recommended for maximum pleasure.
Topics: audio, cannabis, choogle on, choogleon, coast longboarding, coastlongboarding, counter...
509
509
Apr 11, 2018
04/18
by
Kris Carlow
audio
eye 509
favorite 0
comment 0
The Surfbeats Podcast Episode 1. The guest of this podcast is Hobie Surf Shop manager, Andy Cowell. Throughout this podcast we discuss everything surf and music in old school Huntington Beach, CA.
Topics: surf, surf history, surfing, history, vinyl, music, huntington beach, california, alternative,...
119
119
Aug 1, 2005
08/05
by
Dan Erhard
movies
eye 119
favorite 0
comment 0
Longboarding
Topic: longboarding
155
155
Sep 14, 2005
09/05
by
Dan Erhard
movies
eye 155
favorite 0
comment 0
summer fun
Topics: skating, ditch, longboarding
