5
5.0
Mar 9, 2021
03/21
by
Warm Inside (warminside)
data
eye 5
favorite 0
comment 0
There was a request to remix with indented text, I did not change pocket size only opened in meshmixer and moved the top face up. Just realized I was looking at the wrong product the item in the picture is a budkup for the pax3 ... makes a lot more sense now. https://www.budkups.com
Topics: stl, thingiverse, Containers, pax_3, pax, pax_2
2
2.0
Apr 17, 2021
04/21
by
Denys Yaremenko (denysy1)
data
eye 2
favorite 0
comment 0
These are a few versions of a case for Pax Era and Pax Era pods. There are two design - A and B. Each design has a couple options for the case and lid. For each design, the parts are interchangeable - ie for design B, lid B1 and B2 are interchangeable, but you cannot use A parts with B parts. You can either select the "3 pods + Era device" or the "6 pods" version. The case and lid have pockets for 4x2mm round magnets.
Topics: pax pod, thingiverse, stl, pax era, pax, Other
7
7.0
Apr 17, 2021
04/21
by
Eric Coss (thatgrittyguy)
data
eye 7
favorite 0
comment 0
This is an attractive stand for holding a small dry herb vape.
Topics: Hobby, pax_2, thingiverse, stl, pax, pax_3
4
4.0
Mar 9, 2021
03/21
by
Charlie Pope (ChuckWheat)
data
eye 4
favorite 0
comment 0
This is a model I made of the PAX 3. Use it if you like to design fitting accessories around it. Not intended for printing.
Topics: stl, thingiverse, Other, pax_3, pax, pax_2
The Red vs. Blue guys discuss machinima and field questions from the PAX attendees. From PAX 2005.
Topic: pax
Making the games is one part of the process, but what about getting them in front of gamers? Ask questions to a panel of industry professionals, ranging from CEOs of marketing agencies to the Media and PR perspectives. From PAX 2005 Panelists: Alexander Macris [Themis Group], Paul Caparotta [Ubisoft], Sam Kennedy [1UP], Zach Karlson [Sigil]
Topic: pax
QnA number two from PAX 2007
Topic: pax
6
6.0
Jan 17, 2021
01/21
by
J Grant (jgrant87)
data
eye 6
favorite 0
comment 0
i remixed the Pax 1 to Pax 3 sleeve adapter to work as a Pax 1 to Pax 2 adapter sleeve.
Topics: Other, pax 2, pax, thingiverse, pax 1, adapter, stl
7
7.0
web
eye 7
favorite 0
comment 0
Pax-Valley dumped with WikiTeam tools.
Topics: wiki, wikiteam, wikispaces, Pax-Valley, pax-valley, pax-valley.wikispaces.com
The first Q&A from PAX 2007
Topic: pax
Hot coffee? The ESRB? Parents not doing their jobs? Find out what players inside the industry think of the latest scandals, their social implications and where this is all headed. From PAX 2005
Topic: pax
Make a Strip from PAX 2007
Topic: pax
The surprise-hit of PAX 2004 is back. Bring your 30 second Game Pitch for the experts to critique! Is your idea the next Robots vs. Ninja vs. Pirate vs. Monkey? There's only one way to find out. From PAX 2005. Panelists: Larry Hyrb [XBOX], Jeff Kalles [Nintendo] and Mark Vitello [Playstation]
Topic: pax
What's up with XBOX Live? What about Web-based games? How about all those MMOs that are still popping up? This industry panel discusses how the space has evolved and where it's headed. From PAX 2005.
Topic: pax
Testing the boundaries...Exploring the world of electronic music contra common acoustics... Pax is mostly a one man project born into this world around 1999. For more music and information visit: http://www.geocities.com/happypuppies2002 Albums and compilations: Spooky junk (2002), The infintite sector compilation vol.1 (2003) Drums on Mad cap & Bad thing: Samuel A. Vocals on Hot cats: Louise V. Vocals on The french song: Hanne Lisa Sampson Vocals on Unknown: Bjanca Nuka Cello on Lame...
Topic: Pax
2
2.0
Mar 16, 2021
03/21
by
Tony Sesek (tonysesek556)
data
eye 2
favorite 0
comment 0
Original thing did not have a lid that fit 3 pods and 1 pax era on the A design. This is a remix with half of the pod supports removed to make room for the pax era. Enjoy!
Topics: thingiverse, Other, pax_era, stl, pax
2
2.0
Jan 9, 2021
01/21
by
tele mole (telemole)
data
eye 2
favorite 0
comment 0
Loved this little accessory but was always frustrated that : A) the tube didn't fit - I had to drill it out, nearly ruining the print B) Unless you print with something transparent/lucent, you can't see the pax LEDs I fixed both issues and made a few cosmetic changes. Thanks for a great design, hope anyone with a pax 3 will enjoy!
Topics: thingiverse, stl, DIY, pax, pax_3
2
2.0
Mar 13, 2021
03/21
by
octhrope word (octhrope)
data
eye 2
favorite 0
comment 0
simple scoop, works for whatever you want.
Topics: pax_3, thingiverse, pax_2, tool, scoop, pax3, PAX, stl, Other, pax_1, scraper
1
1.0
Apr 19, 2022
04/22
by
No Beach (kompot_PL)
data
eye 1
favorite 0
comment 0
Pax 2/3 bottle bong adapter. All I did is take chazcag's remix and separated the 2 parts. The original maker is wbarber69
Topics: bong, pax, vape, thingiverse, pax 2/3, Other, stl, pax 3, bottle, pax 2
2
2.0
Mar 25, 2021
03/21
by
A A (PM_ME_YOUR_VALUE)
data
eye 2
favorite 0
comment 0
This is a carrying case for the Pax 2/3. It is a work in progress and I still may need to adjust scale for storage. It uses 2 2x5mm magnets.
Topics: stl, thingiverse, pax, pax 3, Electronics, pax 2, case, vape
4
4.0
Mar 18, 2021
03/21
by
Fred 909 (fred909)
data
eye 4
favorite 0
comment 0
I love the original, but kept wanting to put the battery in the stand. I scaled the x and y dimensions 106% in NetFabb. Batteries now fit easily. Thanks epheterson for the sweet original design!
Topics: Containers, pax, stl, thingiverse, pax_era
7
7.0
Mar 5, 2021
03/21
by
Print Life (PrintLife789)
data
eye 7
favorite 0
comment 0
A box with a lid to hold your Pax 3 and other goods. I do not know if it will hold previous version of Pax. Includes: Pax slot Storage slot (Wire Cleaner, Pipe Cleaners, Screens, Charger) Half bowl oven lid slot Key ring scraper slot Packer and loader slot (Very left one and highly recommended) (https://www.thingiverse.com/thing:2447781) Personal experience tip: Increase the number of shells around the edges as my infill decided to show through making lots of weird lines on the outside of the...
Topics: weed, Pax box, stl, box, vape, Other, Pax, pax_3, thingiverse
Dan @ PAX talks with Paweł Miechowski about Polish developer 11 Bit Studios' past game This War of Mine and their upcoming Frostpunk 11 Bit Studios - http://www.11bitstudios.com/ Frostpunk official site - http://www.frostpunkgame.com/ Paweł's Twitter: https://twitter.com/Wujek_Grga Twitter: https://twitter.com/FoldableHuman
Topics: Entertainment, Criticism, pax, pax west 2017, frostpunk
Dan @ PAX talks with Jakobsen Beck, narrative designer at Dead Mage Studios about the upcoming title Children of Morta. Twitter: https://twitter.com/FoldableHuman
Topics: Entertainment, Criticism, interview, pax, pax west, pax west 2017, children of morta
6
6.0
Jan 17, 2021
01/21
by
Scott Tedrow (Sinatics)
data
eye 6
favorite 0
comment 0
Simple and functional wpa for the Pax 3.
Topics: pax_3, thingiverse, Art Tools, Pax, stl
19
19
Jul 9, 2019
07/19
by
Hak5
movies
eye 19
favorite 0
comment 0
Jason Appelbaum and Jenn Cutter bring us sights from the show floor at the Penny Arcade Expo East 2010. Table top dungeons & dragons on a multi-touch surface! A mod to turn any guitar into a game controller and killer gaming headphones. Plus, Shannon investigates secure delete utilities in this week's Snusb Report. All that and more this time on Hak5. Source: https://www.youtube.com/watch?v=ikaZ329LKqU Uploader: Hak5
Topics: Youtube, video, Entertainment, pax east, pax, penny arcade, penny arcade expo, pax east 2010, pax...
5
5.0
Jan 19, 2021
01/21
by
K Su (karans)
data
eye 5
favorite 0
comment 0
This is still in testing, friend asked me to make a packing tool for pax2 , DO NOT USE while PAX oven is hot! PLA does melt if the oven is too hot. This is for packing herbs when pax is not on. Pax Temp: 360ºF (182ºC) – Low 380ºF (193ºC) – Medium 400ºF (204ºC) – Medium-High 420ºF (216ºC) – High PLA softening point: >173ºC Otherwise it works pretty great It also works for pax3 Update 05/14: printed new design again, my printed didnt make the scoop right. So making the scoop...
Topics: vape, pax_3, packing_tool, pax, thingiverse, pax2, weed, Tools, pax_2, stl
10
10.0
Jan 10, 2021
01/21
by
J Grant (jgrant87)
data
eye 10
favorite 0
comment 0
i first created a sleeve form that fits snugly around my PAX 3. Then I used the PAX 1 form from wbarber69 to make an adapter for my PAX 3 sleeve to fit into a PAX 1 sleeve. now you can just put this sleeve adapter into any PAX 1 design to make it fit the PAX 3, rather than reprinting all of your PAX 1 accessories! (I put the holes in the top of it to make it easier to extract in-case it gets stuck) enjoy :)
Topics: thingiverse, stl, pax, adapter, Other, pax 3
7
7.0
Jan 18, 2021
01/21
by
Nick Fisher (nickthefish17)
data
eye 7
favorite 0
comment 0
A scooper and oven packing tool I made for my Pax. Since they have the same oven size, it will work for the Pax 2 or 3. It's up to you whether to print supports or not, but I would at least print a raft just for better stability during the print. Enjoy!
Topics: vape, pax_3, vaporizer, pax, thingiverse, Loader, ploom, Tools, pax_2, Packers, stl
0
0.0
web
eye 0
favorite 0
comment 0
Pax Mondo Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Pax Mondo Wiki, pax_mondofandomcom
0
0.0
web
eye 0
favorite 0
comment 0
Pax Americana Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Pax Americana Wiki, pax_americanafandomcom
2
2.0
Mar 22, 2021
03/21
by
Kyle Mobley (kmobley6030)
data
eye 2
favorite 0
comment 0
Just a simple case for the Pax Era and 4 pods. Print the LID face up and add 10% support so you get a nice smooth cover.
Topics: stl, vape, PAX, vaporizer, thingiverse, PAX ERA, Other
0
0.0
Apr 20, 2022
04/22
by
Luiz Motta (luizmotta)
data
eye 0
favorite 0
comment 0
This is a support for IKEA cupboard shelves. I designed it to support shelves on my PAX wardrobe but it's probably compatible with other cupboards as well. Print with the highest resolution and the insert cut vertical to minimize support and still achieve reasonable resistance (at least it has been holding well in my wardrobe so far!)
Topics: Replacement Parts, ikea_pax, ikea, pax, thingiverse, stl
0
0.0
Apr 20, 2022
04/22
by
Daniel (Knifa)
data
eye 0
favorite 0
comment 0
5cm tool for picking, poking and packing.
Topics: vape, pax, thingiverse, pax ploom, pax3, scoop, stirrer, pax2, Hand Tools, poker, packer, ploom,...
0
0.0
web
eye 0
favorite 0
comment 0
Pax Aeterna Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Pax Aeterna Wiki, pax_aeternafandomcom
3
3.0
Mar 9, 2021
03/21
by
(drstock)
data
eye 3
favorite 0
comment 0
This is a simple case for the PAX Era vaporizer + pod. It's designed to protect the mouthpiece from dust, lint and other debris, and be usable with just the top removed. It has a cutout for the LEDs and for the inlet holes on the sides. This is a work in progress so please let me know how it works for you if you print this. Update: New version is thinner, has better cap retention and has been smoothed out a bit.
Topics: stl, thingiverse, vape, Other, pax_era, pax, case
0
0.0
web
eye 0
favorite 0
comment 0
Pax Romanus Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Pax Romanus Wiki, pax_romanusfandomcom
2
2.0
Jun 10, 2021
06/21
by
Cal Andrews (p00pasaurusx)
data
eye 2
favorite 0
comment 0
Simple and functional 10mm joint water pipe adapter for the Pax 3.
Topics: pax, adapter, 10mm, pax 3, thingiverse, Other, stl
0
0.0
web
eye 0
favorite 0
comment 0
Pax Amberica Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Pax Amberica Wiki, pax_ambericafandomcom
2
2.0
Oct 14, 2021
10/21
by
kv voc (kejovo)
data
eye 2
favorite 0
comment 0
Designed with a bud cup holder if you use them - holds 6 The bud cup holder is on rails to allow cleaning kit to go underneath. Can hold the charger (bit of a tight fit) No supports necessary ENJOY
Topics: thingiverse, stl, pax, weed, 3D Printing, pax_3
10
10.0
Apr 30, 2021
04/21
by
Thomas Gobert (thomasgobert)
data
eye 10
favorite 0
comment 0
Fits pefectly to a pax 3
Topics: stl, Ninjaflex, Protection, cap, pax, thingiverse, pax 3, Other
[DeviantArt Description] Hey everybody, I hope you like hearing someone you don't know personally talk about somewhere you didn't go yourself, because that's what I'm going to do! About PAX! Most of it is summarized in the flash book above, but for other things that did not make good pictures (or just could not fit more elaboration), I will talk about it here. First off, thanks to the five or so people who came and found me! Despite the paranoia I illustrate myself with, it's always a pleasure...
Topics: PAX, Flash, anime
ndependent game designers talk about the music of Audiosurf, The Maw, Sushi Bar Samurai, The Amazing Brain Train, Project Aftermath, Chronotron, Impulse, Polarity, Schizoid and Strange Attractors 2.
Topics: pax, convention, conventions, video games, indie, pax 10, expo
2
2.0
Jan 7, 2021
01/21
by
Tev Kaber (tev)
data
eye 2
favorite 0
comment 0
I'm making the Print and Play version of Pax Pamir 2nd Edition, and wanted some coalition tokens for it, so I made these in Tinkercad, tried to match the look of the real thing, but with different art. Print 12 of each for a full set. This is scaled to work with a game board printed on letter-size paper, so they are probably smaller than the retail version, you could always print them larger if you wanted. I did notice the lion image I used loses some detail when scaled down like this, it lost...
Topics: pax, stl, Games, game, pieces, thingiverse, pax pamir, pamir, pnp
Independent game designers talk about the music of Audiosurf, The Maw, Sushi Bar Samurai, The Amazing Brain Train, Project Aftermath, Chronotron, Impulse, Polarity, Schizoid and Strange Attractors 2.
Topics: pax, convention, conventions, video games, indie, pax 10, demo, expo
0
0.0
web
eye 0
favorite 0
comment 0
Pax Republica MUSH Wiki dumped with WikiTeam tools.
Topics: wiki, wikiteam, MediaWiki, Pax Republica MUSH Wiki, pax_republica_mushfandomcom
3
3.0
Apr 13, 2021
04/21
by
Mr Goateley (goateley)
data
eye 3
favorite 0
comment 0
This is a loader funnel for the pax2. The lid doubles as a stabilizing base for the loading process if you don't have a great working surface. The design includes holes to add optional magnets to hold the lid on as well as to hold the funnel more snugly into the funnel. ***NOTE - I realized the cap contains an internal void between the sandwich layers that won't show at all but depending on the slicing software, it may produce problems. Try turning on supports if you have issues with the cap....
Topics: thingiverse, Vaporizor, pax_2, vaporizer, stl, Other, ploom, pax, vapor
Click here to watch more Welcome to PAX! ► http://penny-arcade.com/patv Subscribe for more Welcome to PAX! ► http://bit.ly/PAtvSub South 2017 - Recap PAX South 2017 has come and gone and we wait fervently for the coming year. As you wait, enjoy this look back over the fun that was had at and look forward to the fun that will be had in 2018. Film/Edit by Octavio Abea www.tavioco.com Music in this episode: Score Squad - Traffic Jam https://www.premiumbeat.com/royalty_f... Penny Arcade comics...
Topics: pax, convention, conventions, montage
Click here to watch more Welcome to PAX! ► http://penny-arcade.com/patv Subscribe for more Welcome to PAX! ► http://bit.ly/PAtvSub West 2016 - League of Heels A much loved PAX tradition sees panelists dress up in ridiculous costumes and compete in a 30-man Royal Rumble on the N64. Film/Edit by Octavio Abea www.tavioco.com Music in this episode: Title Song: Ronald Jenkees - Synergetics https://www.ronaldjenkees.com/mp3-store/ Ronald Jenkees - Almost Undamaged...
Topics: pax, convention, conventions, montage
