2
2.0
Jun 21, 2021
06/21
by
Wladyslaw Stolle (stollew)
data
eye 2
favorite 0
comment 0
I asked my fitter to make quick release latch for out rescue boat safety lines based on nice Auto Gate Latch by peaberry https://www.thingiverse.com/thing:2998264 When I saw his make, well ... I was forced to make own design to show him how it should work. Here is a result (code included) with and without securing pin. It is intended to make from steel plate 4mm thick, dim.50x50mm, but for home use with low force PLA printout should be OK. If You want to make some changes, read code Enjoy!
Topics: quick-release, latch, thingiverse, stl, quick_release, Parts
7
7.0
Jan 18, 2021
01/21
by
Tobias Riefer (accessburn)
data
eye 7
favorite 0
comment 0
Doubleplate for DSLR tripod. Microphone, Flash for example.
Topics: Camera, quick_release_plate, thingiverse, tripod, quick_release, stl
2
2.0
Mar 17, 2021
03/21
by
Pablo Coronel (titrisol)
data
eye 2
favorite 0
comment 0
Velbon QB-4LC remix - Quick Release fits the Videomate-400, CX-430, CX-440, DF-10ML, DF-40, T-3500, and V5000 tripods, and needs a 1/4"-20 camera screw. A quick release plate can be kept attached to the camera's base and allows the user to quickly and easily attach or remove the camera from the tripod without having to waste time fumbling with the threaded mount. I remixed mine, because it needed some extra strength at the bottom to be used with a heavier lens. Printed in PLA 0.2mm 5...
Topics: Tripod, Velbon, Camera, stl, quick_release, thingiverse, quick_release_plate
10
10.0
Jan 14, 2021
01/21
by
Creator of Things (Empiricus)
data
eye 10
favorite 0
comment 0
Here is a quick release clamp and plate for DSLRs and other cameras. Made this because I needed a larger number of these that are compatible with other release plates. Bigger than these usually are (88x70x25mm) for stability. I printed this in Carbonfiber PETG at 0.150 mm resolution 5 perimeters top and bottom layers with 50% infill. Near indestructible.The 3/8-16, 1/4-20 and M6 threads may need to be cut again depending on how you print this. You also need two 25-30mm long springs from regular...
Topics: thingiverse, tripod_mount, Camera, DSLR, stl, quick_release, tripod mount clamp, quick release...
4
4.0
Mar 8, 2021
03/21
by
Gabby de buyst (maverixxx)
data
eye 4
favorite 0
comment 0
These are 2 variants of wall/rims support for fanatec wheels. It allows you to use the quick relaese so that the wheel cannot fall off it. Simply fix it with a M8 allen screw on your alu rim or screw it to the wall.
Topics: stl, thingiverse, fanatec, fanatec_quick_release, quick_release, Computer, rims, simracing
2
2.0
Apr 1, 2021
04/21
by
Luke Harrison (looxonline)
data
eye 2
favorite 0
comment 0
A friend bought a used tripod only to find that the quick release plate was not there. Tinkercad to the rescue. Just insert an M6 bolt that is cut to size and glue it in place. This is for a digital concepts tripod so if you are fortunate enough to have the same one and you have lost it and you have a 3D printer then today is your lucky day.
Topics: thingiverse, Tripod, digital concepts, quick release, Tripod quick release, Camera, stl
2
2.0
Mar 4, 2021
03/21
by
Udom Janjarassuk (kjudom)
data
eye 2
favorite 0
comment 0
camera quick release plate Hex screw hole size: M6
Topics: Camera, tripod, DSLR, thingiverse, quick_release, quick_release_plate, stl, camera
6
6.0
Jan 21, 2021
01/21
by
tyson dabney (yenbadnosyt)
data
eye 6
favorite 0
comment 0
i designed this mount to stabilize my road bike while i worked on it without the front wheel. i later used the same design to ship my bike in the original cardboard box
Topics: fork mount, 9mm quick release, thingiverse, Sport & Outdoors, bicycle, stl, quick release
3
3.0
Mar 20, 2021
03/21
by
Andrew Parker (aparker127)
data
eye 3
favorite 0
comment 0
A clasp for quickly attaching your cable lock to your bike frame for easy carrying while you ride. Designed as a replacement for the clasp on a Giant brand 12mm-diameter cable lock. Animation of how it clips onto the bike: http://i.imgur.com/lrpud74.gif
Topics: bike, bicycle, quick_release, thingiverse, parametric, Lock, Sport & Outdoors, quick-release,...
3
3.0
Mar 22, 2021
03/21
by
Boris (Bju)
data
eye 3
favorite 0
comment 0
This is a T500 quick release adapter compatible to Triclicks Universal Car Snap Off QR and following Thrustmaster wheels: * T500 standard wheel * TM F599XX EVO 30 Wheel AddOn Alcantara Edition It is NOT compatibel to * Thrustmaster Ferrari F1 Wheel AddOn (as mount is here direct injected to housing) You will need further: 1x QR (eg.: https://www.amazon.de/gp/product/B076ZW24WK/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1) 3x M4 hexnut 3x M4 x 30 screws with flat head
Topics: quick_release, t500, stl, quick_release_plate, Video Games, wheel, thingiverse, adapter
7
7.0
Jan 18, 2021
01/21
by
Jesse Smith (sprintwrench)
data
eye 7
favorite 0
comment 0
Quick release plate for a vanguard monopod. Fits a quick release that takes the QS-02 shoe. The hole is sized to use a 1/4 - 20 bolt. I glued a piece of cork on the top with spray glue when i was finished.
Topics: Camera, stl, quick_release_plate, monopod, thingiverse, vanguard, quick_release, monopod_mount
3
3.0
Mar 5, 2021
03/21
by
Piers Marsh (molove)
data
eye 3
favorite 0
comment 0
An adapter to fit an Ikea Tertial onto a tripod with a Manfrotto RC2 quick release
Topics: 200PL, stl, Quick Release, Hobby, Tertial, rc2 quick release, Ikea, Manfrotto, thingiverse
2
2.0
Mar 18, 2021
03/21
by
Goktunc Sen (goktunc)
data
eye 2
favorite 0
comment 0
I printed this after losing the original quick release mount. The diameter of the pin on the top is 5mm. The release part at the down is 40x40mm. The top is 75x58mm and the diameter of the hole is 6mm.
Topics: thingiverse, Camera, quick_release, stl
8
8.0
Apr 28, 2021
04/21
by
Jason Chall (pbzJ)
data
eye 8
favorite 0
comment 0
For some inexplicable reason, there about 1000 different variants of these common quick release buckles. I need some male ones to mate up with the female ones on my Hydra 4.5, so I spent a stupid amount of time refining this model, but it's pretty good now. The male buckle is quite close to the OEM part and holds up quite well in ABS (haven't tried PLA). There are a couple extras from my project in there but they're a bit more of a work in progress. The male and female keyholes on these will...
Topics: Hobby, stl, thingiverse, quick_release
6
6.0
Jan 20, 2021
01/21
by
Grégory Renaud (nobock)
data
eye 6
favorite 0
comment 0
i made my own system of quick plate / release optimised for 3d printing and compatible with manfroto quickplate. The project require a total of 50 gramms of plastic ( 2€ ) and arround 5$ in hardware.
Topics: Camera, thingiverse, manfrotto_quick_release, quick_plate, quick_release, quick-mount-plate, stl
2
2.0
Oct 26, 2021
10/21
by
James Burroughs (JEBurroughs)
data
eye 2
favorite 0
comment 0
70mm - Wedge Style - Steering Wheel Quick Release - Remix (Remix from https://www.thingiverse.com/thing:4572839) The locking screw was in the way for my new button plate so I needed a different way to lock the release. This remix removes the locking screw path and related items so that both plates are now solid. I added a hole at the top of the mount. The wheel side has an expanded hole so a 5mm screw will pass through and then self tap into the base plate of the quick release and then...
Topics: quick_release, 70mm, Sim Racing, Hobby, stl, thingiverse, Wedge Quick Release, Steering_wheel
5
5.0
Mar 16, 2021
03/21
by
Tim (techboner)
data
eye 5
favorite 0
comment 0
You need to skale it to 1000% You need a spring with a 9mm diameter and a total length of 20mm. For the balls i used 6mm airsoft BB's.
Topics: Parts, stl, quick_release, thingiverse
7
7.0
Apr 2, 2021
04/21
by
Kalle Loord (operandi)
data
eye 7
favorite 0
comment 0
This thing is a quick relese mounting plate for a Manfrotto 785B camera tripod.
Topics: photography, quick-mount, quick-mount-plate, quick-release, openscad, thingiverse,...
8
8.0
Mar 21, 2021
03/21
by
Isaac Feemster (3Dprinting101)
data
eye 8
favorite 0
comment 0
this is a rope quick release, put small stick through both holes and tie ropes on both ends, tie a small rope on the stick and pull when ready.
Topics: quick_release, thingiverse, stl, Gadgets
3
3.0
Jan 5, 2021
01/21
by
Corey (BudgetFlex)
data
eye 3
favorite 0
comment 0
I remixed this to have a thread so you can screw it to any standard 1/4" camera screw.
Topics: Camera, quick release, stl, thingiverse
2
2.0
Mar 15, 2021
03/21
by
nonIonizing EMF (nonIonizingEMF)
data
eye 2
favorite 0
comment 0
Going through my projects and can use a tripod. Well, I happen to have three Goodwill Store $5.99 or less tripod finds I invested in over the years that were missing the quick release. Decided to make new quick releases with the DesignSpark Mechanical software, maybe some 3D Builder if needed for quicker splits and merges and the Monoprice Select Mini V2. I uploaded both the .slt and the .rsdoc file in case you want to modify the .slt since is a tight fit. Thinking can round the edges a little...
Topics: Quick Release, QS05, thingiverse, Radio Shack Tripod, Camera, Tripod Quick Release, stl, QS-05
7
7.0
Jan 16, 2021
01/21
by
(BobbyFiziks)
data
eye 7
favorite 0
comment 0
A quick design to mount a GoPro session to a quick release mount on a tripod using a standard bolt (M5 I think...)
Topics: quick-release, go_pro, Camera, GoPro_Mount, quick_release_plate, go_pro_mount, thingiverse,...
3
3.0
Mar 22, 2021
03/21
by
The Crazy Printer (TheCrazyPrinter)
data
eye 3
favorite 0
comment 0
Action Cam holder for Manfrotto/National Geographic Ngtt2 Tundra Tripod
Topics: quick_release, GoPro, stl, GoPro_Mount, Tripod_Quick_Release, andoer_4k, Sport & Outdoors,...
8
8.0
Jan 14, 2021
01/21
by
Josef Josefsson (unwohlpol)
data
eye 8
favorite 0
comment 0
This is a quick release plate designed to replace the Sirui TY-C10. I like how these plates are slim, light and still fit the arca-swiss standard - they're perfect for my old 35mm film cameras. But they are expensive too, so having one for each camera can be a considerable expense... so I designed and printed my own. There's also a tripod screw if you're some kind of scrooge, but be aware: there's a reason these screws are made out of metal. If you print it, make sure your settings and material...
Topics: thingiverse, tripod_mount, Camera, stl, arca_swiss, tripod_screw, quick_release, quick_release_plate
4
4.0
Apr 1, 2021
04/21
by
zgbot (zgbot)
data
eye 4
favorite 0
comment 0
I HAVE MOVED ALL MY DESIGNS TO MY OWN SITE http://www.tmophoto.com/product-category/3d-product-download/ . . . . . . .This part has been upgraded and the new part can be found here http://www.thingiverse.com/thing:416422
Topics: thingiverse, quick release, camera, Other, stl
8
8.0
Apr 30, 2021
04/21
by
Jeff Hamilton (Jeffhami)
data
eye 8
favorite 0
comment 0
Needed a quick release mount for my Amazon drag chain and I could find one on the site. The mount will allow me to quickly unhook my drag chain from the side of the case without the need for cable ties. I did add a small cable tie section to the bottom to be used at the connection with your wire loom. Just use some strong two sided sticky tape to mount the base to the case. Amazon Drag Cable: https://www.amazon.com/gp/product/B00880AVL2/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Topics: stl, cable quick release, Drag Chain Mount, chain quick release, drag_chain, Cable chain mount, 3D...
3
3.0
Mar 8, 2021
03/21
by
Jacques Botha (SquigyXD)
data
eye 3
favorite 0
comment 0
Had a discussion with my neighbor about the possibility of 3d printing a small ish quick release mechanism. I said sure why not. Quick google search later, I found a few examples of how the mechanism works. spent about an hour to draw it up. You'll need: 4x m3 10mm 4x m3 nyloc nuts You might need to sand a few bits, tolerances are a tad tight (The support ridges also don't help) Reason for flat print orientation (hence the need for supports on a few of the bits) is so we can util the print...
Topics: stl, thingiverse, Engineering, quick_release, release
3
3.0
Apr 13, 2021
04/21
by
Lucas Boucher (lboucher)
data
eye 3
favorite 0
comment 0
Quick release or a solidex tripod
Topics: thingiverse, Quick_Release, stl, Household, Tripod
3
3.0
Apr 1, 2021
04/21
by
zgbot (zgbot)
data
eye 3
favorite 0
comment 0
rI HAVE MOVED ALL MY DESIGNS TO MY OWN SITE http://www.tmophoto.com/product-category/3d-product-download/ . . . . . . .eplacement for a lost bogen 484RC2 quick release plate BE VERY CAREFUL WITH A PRINTED QUICK RELEASE PLATE, MY CAMERA EJECTED OFF MY TRIPOD AND LANDED LENS FIRST ON THE GROUND DESTROYING A VERY EXPENSIVE LENS
Topics: thingiverse, quick release, camera, Other, stl
2
2.0
Apr 1, 2021
04/21
by
Thorbjørn Toft (t-bear)
data
eye 2
favorite 0
comment 0
Quick release replacement plate for Hama tripod type "Profil 78". My existing quick release plate broke due to wear and tear, so i created this simple plate. Took 20 minutes to create on thingiverse. I printed it with PETG, and with 80% infill. Though it is a small part, it still feels super solid. Fits snugly in the tripod socket. This is what 3d printers are for! Awesome and simple.
Topics: thingiverse, quick_release, Camera, stl, tripod
3
3.0
Mar 5, 2021
03/21
by
Quenton (QuentonProd)
data
eye 3
favorite 0
comment 0
Plaque de fixation rapide pour appareil photo numérique
Topics: stl, quick_release, DSLR, Camera, thingiverse
5
5.0
Jan 21, 2021
01/21
by
Artur Petrzak (petrzmax)
data
eye 5
favorite 0
comment 0
If You enjoyed this project and You want to say "Thank You" please consider supporting me by sending a tip on thingiverse or my PayPal here . Velbon QB-6RL Quick Release Plate. My fluid head wasn't straight so i have made this plate and I have bent it to compensate the curvature. (You can see this on the photos) **But don't worry!** Uploaded model is straight, so You can print it and made a few low cost Quick Release Plates!
Topics: Quick Release Plate, plate, QB-6RL, Camera, camera, thingiverse, tripod, quick, Velbon,...
6
6.0
Jan 18, 2021
01/21
by
xavier a (xavan)
data
eye 6
favorite 0
comment 0
Most of available Quick Release (QR) systems are designed for DSLRs.These QR plates are quite big, not convenient for small compact cameras and the use of theses plates can render the the battery or memory card slot inaccessible. This low footprint QR system has been designed to solve these issues and the plates are compatible with the widespread RC2 Manfrotto clamp (with an adapter - www.thingiverse.com/thing:2615567).
Topics: Camera, stl, tripod_mount, quick release plate, thingiverse, tripod, tripod_adapter, quick_release,...
1
1.0
Mar 9, 2021
03/21
by
Tycho Pandelaar (tychop)
data
eye 1
favorite 0
comment 0
I designed an adapter for Fanatec's Quick Release system so I could re-use my three LG 32GK650F monitor stands from my tripple screen sim-rig as wheel stands.
Topics: fanatec_quick_release, stl, thingiverse, Computer
4
4.0
Mar 21, 2021
03/21
by
Jeremy Bruck (bruckj)
data
eye 4
favorite 0
comment 0
This is a quick release nut that I designed for use with my 3D printer spool holder. By depressing the two buttons you can quickly slide the nut to a position along an M8 threaded rod. Then release the buttons and tighten the nut to preference. My application does not call for significant retention force so I have simply printed the threads into the parts. Alternately, I have included a couple of prototype solutions that ought to be more robust. The first is simply to cut a nut in half and...
Topics: quick_release, Parts, stl, nut, thingiverse
Learn how to change your steering wheel so you can remove your old steering wheel and replace it with a quick release steering wheel. In this video I show you how to remove the airbag and steering wheel and install a Momo steering hub, an NRG quick release hub and a racing steering wheel with push buttons for the horn and radio. Thanks @ThatDudeinBlue for sharing your dangerous steering wheel footage! NEW ChrisFix swag: https://www.bunkerbranding.com/pages/chrisfix Shallow Dish Steering Wheel:...
Topics: Youtube, video, Autos & Vehicles, ChrisFix, NRG, Quick Release, Momo, Steering Wheel, Quick...
5
5.0
Jan 21, 2021
01/21
by
Steve D (Goingmad)
data
eye 5
favorite 0
comment 0
A Lanyard or Medal Safety Clip This will take a 1 inch or 25mm wide ribbon. Pulling on the lanyard will result in the clip pulling apart so it doesn't get stuck. Once printed test the pushing together and pulling apart of the two pieces, if still to tight use a piece of sandpaper to rub down the small nodule on the male connector until you get the desired pull apart strength. Please post a make if you print one, it's always good to see one someone else has made.
Topics: clip, release, child_safety, pull, Medal, thingiverse, Safety, Office, lanyard, quick_release, stl,...
1
1.0
Jul 22, 2021
07/21
by
Dani Dobre (dobredani)
data
eye 1
favorite 0
comment 0
QR clamp designed for 32.5 mm tube diameter. 5x20 screws + nuts 5x100 washers I've printed mine with PETG, 0.4 nozzle.
Topics: DIY, stl, mount, thingiverse, quick_release
3
3.0
Jun 11, 2021
06/21
by
Christopher Kellas (AppleAssassin)
data
eye 3
favorite 0
comment 0
Magnetic quick release keychain uses 8x3mm magnets. May require some scaling on the parts to get them to fit perfectly on your machine, however, I designed the part to allow some tolerance between printers. If you don't have magnets it still works without them. Only requires supports for the little nub coming out of one of the parts if you don't want it to be slightly droopy.
Topics: keychain, Keychains, thingiverse, quick_release, stl
2
2.0
Mar 17, 2021
03/21
by
Sheeraz Hussain (Sheerazrtr)
data
eye 2
favorite 0
comment 0
Lost my Quick Release for Fotopro DIGI-3400 tripod, so made my own replacement. Notes: for best results align top face to the build plate
Topics: Fotopro_DIGI-3400, tripod, quick_release_plate, Parts, stl, tripod_mount, quick_release,...
2
2.0
Jun 11, 2021
06/21
by
Cody Hedberg (aksnowjunky)
data
eye 2
favorite 0
comment 0
Quick release mechanism for experiments. Print two for a pin holding heavier objects. Open to remix for adjustments.
Topics: thingiverse, quick_release, Hobby, experiment, stl
6
6.0
Jan 15, 2021
01/21
by
(Vanson)
data
eye 6
favorite 0
comment 0
I made a Quick release screw for my vanguard Alta CA 234AT You can mount your DSLR on it with your vanguard quick release shoe plate. You need 4 M5 wooden screw for fix it anywhere.
Topics: Camera, thingiverse, stl, vanguard, quick_release
1
1.0
May 1, 2021
05/21
by
Caverna Geek (cavernageek)
data
eye 1
favorite 0
comment 0
Peça para adaptar câmeras com rosca 1/4 como action cams ou DSLR em braço articulado de microfone junto com uma sapada de engate rápido de tripé. sapata_com_rosca_v2.stl: para ser usado com o adaptador que já vem com o braço articulado. sapata_com_rosca_m10_v1.stl: para ser usado sem o adaptador acima, usando somente o pino de metal com rosca de 9,2mm. adaptador_rosca_m10_para_1-4_v1.stl: para ser usado sem a sapata de engate rápido de tripé. trava.stl: trava para a sapata Vídeo:...
Topics: stl, DSLR, GoPro, GoPro_Mount, boom_arm, DIY, quick_release, quick_release_plate, camera_tripod,...
8
8.0
Jun 21, 2021
06/21
by
Серёга (Cepega_3D)
data
eye 8
favorite 0
comment 0
Made this a while ago when I Bought a decently cheap tripod (Chinese brand of some sort) and found myself in need of more quick release plates to quickly change gear on tripod. So I created one based on the original design, omitting some fine and unnecessary details. Rough sizing is about 11mm height, 39mm width, and 49mm in length.
Topics: arcaswiss, arca swiss plate, quick release plate, quick-release, tripod plate, thingiverse, arca...
3
3.0
Mar 5, 2021
03/21
by
Dane Vandewiele (MrDane)
data
eye 3
favorite 0
comment 0
This is a manfrotto style quick release plate that I whipped up to allow the mounting of a black magic design pocket camera 4K on a ronin S gimbal. It offsets the camera just enough that it will fit onto the ronin s. warning: due to the offset added to allow the black magic pocket 4K to fit on the ronin s, some of the safety stops you expect to be there on the mounting plate are missing. Use this plate at your own risk. Double check that the plate is printed correctly and locks well in the...
Topics: stl, offset quick release, black magic design, offset manfroto, pocket 4k, quick release, ronin s,...
2
2.0
Mar 15, 2021
03/21
by
joel brittain (BritsFabrication)
data
eye 2
favorite 0
comment 0
Simple quick release plate for K&F ball head
Topics: K&F, thingiverse, k and F, quick_release, k & F, quick_release_plate, Camera, stl, tripod
2
2.0
Mar 16, 2021
03/21
by
nonIonizing EMF (nonIonizingEMF)
data
eye 2
favorite 0
comment 0
Going through my projects and can use a tripod. Well, I happen to have three Goodwill Store $5.99 or less tripod finds I invested in over the years that were missing the quick release. Decided to make new quick releases with the DesignSpark Mechanical software, maybe some 3D Builder if needed for quicker splits and merges and the Monoprice Select Mini V2. I uploaded both the .slt and the .rsdoc file in case you want to modify the .slt since is a tight fit. Thinking can round the edges a little...
Topics: Quick Release, Radio Shack, thingiverse, Radio Shack Quick Rel, Camera, Tripod Quick Release,...
6
6.0
Jan 15, 2021
01/21
by
Leo drums (teatimeAlbert)
data
eye 6
favorite 0
comment 0
This is a Release Plate for the Vivanco VA22. I had trouble to get the Screw in, so I heated it with an Soldering Iron.
Topics: vivanco, thingiverse, Camera, stl, useful, release, quick_release_plate, camera, quick release,...
8
8.0
Mar 10, 2021
03/21
by
Billy Tail (ProtomakerSprint)
data
eye 8
favorite 0
comment 0
MXL Quick Release Belt Drive feeder. Quick Release Belt Drive feeder works https://youtu.be/L1bhO8OLWd8 via @YouTube This belt feeder has worked very, very well but after some strong handed uses I discovered some parts will benefit from making stronger, I am working on this now. If possible position the latch blot toward the front for easier access. This belt slipping is after quite a lot of use. Harder filament than PLA should work better IMPORTANT !!! I have been let down by the bolt supplier...
Topics: Quick_Release_Drive, Belt_Drive_feeder, stl, thingiverse, filament_feeder, 3D Printer Extruders,...
2
2.0
Mar 16, 2021
03/21
by
Andre Pothier (the16bitgamer)
data
eye 2
favorite 0
comment 0
Have you ever wanted to play your Virtual Boy, but never found a comfortable way to do so, or perharps wanted to use a better stand to hold your Virtual Boy. Well with this Adapter you can. It both adapts the Virtual Boy mounting point to something which you can screw into, and includes mounts for a tripod screw, or a tripod quick release. If you don't have a printed check out my stores, I sell some of my designs printed with everything you'll need: etsy - http://www.16bitgamestore.etsy.com/...
Topics: Boy, thingiverse, Nintendo, Virtual, Virtual_Boy, Tripod, Adapter, Tripod_Quick_Release,...
