This thesis investigates the feasibility of applying a composite repair patch in the underwater environment as an alternative repair on aluminum ship hulls over conventional welding and replacement repairs, which can be too costly and time consuming. An aluminum sample with a machined hole was chosen as the defected material to repair. After much research and leveraging of NSWCCD’s approved topside composite repair procedure, a composite repair patch with E glass and a chosen underwater epoxy...
Topics: composite repair, underwater repair, Navy Ship repair
7
7.0
Mar 17, 2021
03/21
by
Steve Fisher (Tumbledown)
data
eye 7
favorite 0
comment 0
This was printed 0.1mm layers, open side down with a brim in PETG. 3 have been printed and are in use, but not sure how long these will last. Only time will tell
Topics: repair_part, furniture_repair, stl, repair, thingiverse, DIY
42
42
texts
eye 42
favorite 1
comment 0
service manual
Topic: repair
41
41
Feb 21, 2017
02/17
by
Rossiter, Walter J., Jr.; Nguyen, Tinh
texts
eye 41
favorite 0
comment 0
Topics: Roofs -- Maintenance and repair, WaterproofingRoofs -- Maintenance and repair, WaterproofingRoofs...
4
4.0
Mar 19, 2021
03/21
by
Philippe MESLIN (BrutDePomme)
data
eye 4
favorite 0
comment 0
J'ai récupéré un synthétiseur avec deux touches de cassées. J'ai utilisé mon imprimante 3D pour refaire ces deux touches.
Topics: repair, DIY, thingiverse, repair_part, stl
6
6.0
Mar 18, 2021
03/21
by
Cloud Chagnon (coolsa)
data
eye 6
favorite 0
comment 0
This is a part for a microphone stand that broke. (still a wip)
Topics: repair_part, thingiverse, stl, repair, Audio
143
143
Aug 23, 2020
08/20
by
Choate, Curt
texts
eye 143
favorite 9
comment 0
219 pages
Topics: Engines -- Maintenance and repair, Engines Repair
4
4.0
Mar 22, 2021
03/21
by
Nathan Brown (thystonius)
data
eye 4
favorite 0
comment 0
Support part for [LilGadgets headphones](https://www.lilgadgets.com/products/connect). These headphones lasted a "while" before getting broken at the weak joint where the headphones size adjustment and pivot point. These support pieces lock reinforce the fragile zone. BUT... they prevent the headphones from being resized. They are locked into the largest size possible. We have tested these on models LGCP-06 and LGCP-05 and they fit just fine. The headphones can still fold down (but...
Topics: stl, repair_part, repair, Audio, thingiverse
2
2.0
Apr 28, 2021
04/21
by
Peter Moore (Sagittario)
data
eye 2
favorite 0
comment 0
Due to a motor bearing failure in my mothers Oreck vacuum cleaner totally melting the plastic around the screw holes, I modelled and printed one of these replacements. Printed in ABS 100% infill with supports everywhere and brim (Cura) I've added support standoff support with wide bases underneath to help with bed adhesion after a failed attempt. these are easily removed after printing. A no standoff version is included if you prefer. BTW the nut holding the fan is clockwise to unscrew not the...
Topics: repair, repair_part, thingiverse, stl, Other
3
3.0
Jan 6, 2021
01/21
by
kishore varma (rnkv23)
data
eye 3
favorite 0
comment 0
I had this Salter weighing scale for 3 years, it good and i loved this product. My kid broke a leg by junping on it. on further investigation other legs were worn out too. Having a 3d printer took this as a weekend project, measured, designed and printed the legs. The legs are designed to have free space of 1mm between the load sensor and leg(with coin included) coin. Since the metal disk on which the load sensor rests, i used coins, the four coins i used is 22 mm and thickness 1.5 mm. coins...
Topics: Parts, repair_part, stl, repair, thingiverse
6
6.0
Jan 21, 2021
01/21
by
ALII MOKOFISI (chillysmokes)
data
eye 6
favorite 0
comment 0
This was more to see if I could do it in a simple way. The kids broke the same dining room chair like 5 times. At long last there was no amount of wood glue that was gonna hold it together anymore. The pictures are a little rough because there's saw dust and all but it looks a lot better than the pics or than it did before 8)). I include 3 different versions. #2 is the one I used in the end. I sawed the broken section of the chair off, fit it in, drilled some pilot holes, removed the part and...
Topics: repair_part, repair, thingiverse, chairs, Kitchen & Dining, furniture_repair, stl, chair
10 p. : 23 cm
Topics: Plows Maintenance and repair, Harrows Maintenance and repair, Plows -- Maintenance and repair,...
Various maintenance manuals for the DeLorean, scanned and OCR'ed.
Topic: Automotive Repair
49
49
Mar 6, 2020
03/20
by
RetroRepairs
movies
eye 49
favorite 0
comment 0
Assembling A DIY Oscilloscope Kit DSO 138 Retro Repairs Fixing Ebay Junk
Topic: Repair Video
9
9.0
software
eye 9
favorite 0
comment 0
Expert_Repair
Topic: Expert_Repair
37
37
Jan 21, 2013
01/13
by
Paul Weissler
texts
eye 37
favorite 0
comment 0
ERSATZEILKATALOG FUR DIE TRAKTOREN ZT320
Topic: REPAIR MANUAL
automotive repair textbooks Alisons automotive repair manual Auto body repairing and repainting Automotive brake systems Automotive electrical systems Automotive engines maintenance and repair Automotive power train systems Automotive suspension & steering systems Chiltons motorcycle handbook Chiltons motorcycle repair manual, l981 Chiltons motorcycle troubleshooting guide Diesel fundamentals, service, repair Diesel and high-compression gas engines fundamentals Fix your Ford V8, V6, 6, and...
Topic: automotive repair
4,806
4.8K
software
eye 4,806
favorite 0
comment 0
pe
Topic: computer repair
69
69
Oct 4, 2010
10/10
by
Holmes, Dennis
texts
eye 69
favorite 0
comment 0
10
10.0
Jun 2, 2022
06/22
by
Chilton, J. S. (Jeff S.)
texts
eye 10
favorite 0
comment 0
1 volume (unpaged)
Topic: Auto Repair
60
60
Aug 26, 2010
08/10
by
Korn, Jerry editor
texts
eye 60
favorite 1
comment 0
includes index & glossary
Topic: air repair
United States Court of Appeals for the Ninth Circuit 8 August 2018 An appeal from the district court's order invalidating settlement agreements in a wage-and-hour case.
Topic: glass repair
4,254
4.3K
software
eye 4,254
favorite 0
comment 0
pe
Topic: computer repair
June Soh, VOA News 20 April 2017 Charlottesville, a small city about 190 kilometers south of Washington D.C., is known to welcome refugees. More than 3,000 refugees, including Yasha Ismailov, have re-started their lives here, where Ismailov has built a reputation as the ultimate fixer of cars.
Topic: Repair Shop
Repair guide to 1940s electronics including radios and televisions. No Copyright renewal found in Stanford or LOC online databases.
Topic: electronics repair
5
5.0
Jan 15, 2022
01/22
by
Brown, Colin, 1942-
texts
eye 5
favorite 0
comment 0
315 pages : 28 cm
Topics: Automobiles -- Maintenance and repair, Cars Maintenance & repair
Caption title
Topics: Draperies Maintenance and repair, Tablecloths Maintenance and repair, Cushions Maintenance and...
5
5.0
Apr 16, 2021
04/21
by
Zach Anderson (ztander)
data
eye 5
favorite 0
comment 0
A buddy of mine asked me if I could repair his sunglasses so I sliced an existing file and used gorilla glue to bond the parts together. Tape was used to match the other side of the glasses. print time: about an hour layer height: 0.2 mm
Topics: diy, repair, sunglasses_repair, thingiverse, stl, bonding, sunglasses, Glasses, glasses,...
7
7.0
Jul 13, 2021
07/21
by
Mead, John S
texts
eye 7
favorite 0
comment 0
314 pages
Topics: Automobiles -- Maintenance and repair, Cars Maintenance & repair
15
15
Jun 10, 2020
06/20
by
Tooley, Michael H
texts
eye 15
favorite 0
comment 0
vii, 258 pages
Topics: Microcomputers -- Maintenance and repair, Microcomputers Maintenance & repair
5
5.0
May 1, 2021
05/21
by
3d fox (3D_MrFox)
data
eye 5
favorite 0
comment 0
Little Miss Flowerpower was inconsolable when her beloved hairband broke. MrFox to the rescue! Whipped up a little repair connector in PINK pla (ofcourse!) Infill at 100% for extra strength. A little sanding to smooth out some sharp edges... A tiny drop of superglue.. and now the little Miss can laugh again :D
Topics: stl, repair_part, repair, Accessories, hairband, thingiverse
6
6.0
Mar 26, 2022
03/22
by
Brown, Colin, 1942-
texts
eye 6
favorite 0
comment 0
244 pages
Topics: Automobiles -- Maintenance and repair, Cars Maintenance & repair
11
11
Jul 5, 2021
07/21
by
Coomber, I. M. (Ian M.)
texts
eye 11
favorite 0
comment 0
433 pages
Topics: Automobiles -- Maintenance and repair, Cars Maintenance & repair
4
4.0
Mar 2, 2022
03/22
by
Penfold, R. A
texts
eye 4
favorite 0
comment 0
[176] pages
Topics: Microcomputers -- Maintenance and repair, Microcomputers Maintenance & repair
5
5.0
Mar 5, 2021
03/21
by
Tyler Gester (Tgest)
data
eye 5
favorite 0
comment 0
Inner clamp replacement part for Hifimann He-400. Not sure it will work on other headsets. Mine required a little enlargement of the 2 small holes after print. But prefer it smaller for tighter press fit.
Topics: stl, Replacement Parts, repair, repair_part, thingiverse
3
3.0
Mar 25, 2021
03/21
by
akira san (akirasan)
data
eye 3
favorite 0
comment 0
Parte del cierre de un transporting para animales domésticos
Topics: stl, repair_part, blender, thingiverse, repair, Pets
14
14
Jul 14, 2021
07/21
by
Legg, A. K
texts
eye 14
favorite 0
comment 0
296 pages
Topics: Automobiles -- Maintenance and repair, Cars Maintenance & repair
2
2.0
Aug 9, 2021
08/21
by
Jacob Vanzella (AdamaEE)
data
eye 2
favorite 0
comment 0
You may notice your Sodastream Source losing pressure over time even though you have a full tank of CO2. The cause may be due to a weakening of the pin used to press the valve pin on the CO2 bottle as it is made of plastic and yields over time. This part slots into the lever to add some length to the pin to make up for length lost by the yielding of the part. Worked well in my machine. Printing: You may want to add supports to the overhangs, but it'll probably print fine without support.
Topics: repair, thingiverse, Sodastream, Parts, stl, repair_part
4
4.0
May 1, 2021
05/21
by
Daniel Jörg Schuppelius (l0gtr0n)
data
eye 4
favorite 0
comment 0
Ersatzteil für Bürostuhlhebel Druckteil für U-Profil Loch = T=30mm, B=12,9mm, H=6,7mm Nut = T=12mm, B=8,2mm, H=3,2mm Empfehlung: Muss geklebt werden.
Topics: stl, repair_part, repair, Replacement Parts, thingiverse
29
29
Jan 6, 2021
01/21
by
Legg, A. K
texts
eye 29
favorite 0
comment 0
423 pages
Topics: Automobiles -- Maintenance and repair, Cars Maintenance & repair
12
12
Jul 13, 2020
07/20
by
Legg, A. K
texts
eye 12
favorite 0
comment 0
267 pages
Topics: Automobiles -- Maintenance and repair, Cars Maintenance & repair
7
7.0
Oct 15, 2021
10/21
by
Mikhail Fortis (Fortis852)
data
eye 7
favorite 0
comment 0
This is a spool holder that lets you keep the door on your FlashForge Adventurer 3 without making any modifications to the machine for printing external filament. All of the other designs are hours and hours, tons of wasted plastic and you have to keep the door off. Prints in 39 minutes. Super minimal design.... did I mention you can keep your door on? I would like to add two little tiny filament guides for running the filament through the inside that can handle just raw filament or to hold a...
Topics: repair_part, thingiverse, stl, repair, Replacement Parts
11
11
Jul 14, 2021
07/21
by
Coomber, I. M. (Ian M.)
texts
eye 11
favorite 0
comment 0
[180]p
Topics: Automobiles -- Maintenance and repair, Cars Maintenance & repair
10
10.0
Jul 5, 2021
07/21
by
Mead, John S
texts
eye 10
favorite 0
comment 0
441 pages
Topics: Automobiles -- Maintenance and repair, Cars Maintenance & repair
22
22
Jul 5, 2021
07/21
by
Minter, Matthew, 1952-
texts
eye 22
favorite 0
comment 0
402 pages
Topics: Automobiles -- Maintenance and repair, Cars Maintenance & repair
11
11
Jul 7, 2021
07/21
by
Coomber, I. M. (Ian M.)
texts
eye 11
favorite 0
comment 0
227 pages
Topics: Automobiles -- Maintenance and repair, Cars Maintenance & repair
16
16
Dec 29, 2020
12/20
by
Legg, A. K
texts
eye 16
favorite 0
comment 0
296 pages
Topics: Automobiles -- Maintenance and repair, Cars Maintenance & repair
6
6.0
Feb 2, 2021
02/21
by
Strasman, P. G
texts
eye 6
favorite 0
comment 0
345 pages
Topics: Automobiles -- Maintenance and repair, Cars Maintenance & repair
Thesis (B.S.)--University of Illinois, 1912
Topics: Railroad repair shops, Railroad repair shops, Theses
