556
556
Apr 6, 2011
04/11
by
"Sharpsrirleman," pseud. [from old catalog]
texts
eye 556
favorite 0
comment 0
[106] p. 18 cm
Topic: Rifle practice. [from old catalog]
6
6.0
Apr 20, 2021
04/21
by
(-Juju-)
data
eye 6
favorite 0
comment 0
Support for CZ455 breech with two magazine.
Topics: thingiverse, cz455, support, Breech, stl, magazine, Hobby, 22_long_rifle, rifle, 22LR
5
5.0
Jan 18, 2022
01/22
by
(7Dimension)
data
eye 5
favorite 0
comment 0
Protocol 781-A Phantom Hey everyone, welcome to my current project. It is still WIP but it is expected to be fully published by ###16.01.2022 (or earlier) most of the modeling is already done, currently the model is being finetuned. ###Before printing - check if the part is on the right side - check if you have enough infill/perimeter - is your print bed big enough (20x20cm)? -> if not, rescale in your slicer The new skin series of Valorant has fascinated me and so I decided to rebuild the...
Topics: thingiverse, video_game, Video_games, VALORANT_COSPLAY, prop, cosplay_prop, cosplay, protocol 781...
8
8.0
Jun 11, 2021
06/21
by
(AlexXYK)
data
eye 8
favorite 0
comment 0
Summary Also see my Glock Magazine Rack here - https://www.thingiverse.com/thing:3175023 5-wide AR-15 magazine rack. I designed this for use with Sig Sauer 30rd magazines, but it works just fine for Magpul PMAGS. The rack itself is very strong - it can successfully hold all five full 30rd magazines without issue. I attached it to my gun cabinet using M4 panhead screws, which can be found on Amazon at the below link, but you can mount it any way you like. There should be no angles more extreme...
Topics: rack, PMAG, rifle, magazine, thingiverse, gun safe, Magpul, reloading, gun, Sig Sauer, AR-15, stl
8
8.0
Jun 11, 2021
06/21
by
(AlexXYK)
data
eye 8
favorite 0
comment 0
Summary 10/12/2018 Update: Fixed issue with dovetail corner radius, added 0.2mm tolerances around dovetails. The bullet feeder/collator on my Hornady Lock 'n Load AP is incredibly loud when it's running. I noticed someone on YouTube was using a pan lid to keep the noise down, which seemed really effective. Since I wasn't going to run around the local thrift shops in search of a lid that fit perfectly, I decided to design and print my own. Just print four of the lid pieces, sand and fit...
Topics: Bullet_Feeder, Bulletfeeder, reloading_tools, rifle, thingiverse, cover, hornady_LNL, pistol,...
3
3.0
Apr 4, 2021
04/21
by
(AlucardWulf)
data
eye 3
favorite 0
comment 0
It was a project for my father and he is happy with it. 16mm Rods (from the garden department of your hardware store) fits in the joint parts. Connect everything with M6 bolts and a string and your done.
Topics: thingiverse, rest, rifle, Bush, stl, shooting, Other, stick, Hunting
9
9.0
Apr 24, 2021
04/21
by
(Andymeister)
data
eye 9
favorite 0
comment 0
I Needed a tool to dismantle Hausken jakt JD 224 cal. 30-06 silencer so I can clean it after a trip on the shooting range or hunting trip. The tool is designed so you can use a ratchet with a 6mm x 6mm pipe square. Outside square is intended to use with a wrench
Topics: silencer, Hunting, rifle, shooting, stl, thingiverse, Tools
11
11
Jun 10, 2021
06/21
by
(AwesomeA)
data
eye 11
favorite 0
comment 0
Steyr Mannlicher is a firearms manufacturer based in Sankt Ulrich bei Steyr, Austria. Originally part of Steyr-Daimler-Puch, it became independent when the conglomerate was broken up in 1989. My Patreon is where you can request a logo! Thank you for your support! http://patreon.com/Awesomea
Topics: Steyr, easy, gun logo, nice, logo, 3dpicks, sign, rifle, small, thingiverse, awesome, neat,...
8
8.0
Jan 16, 2021
01/21
by
(BManx2000)
data
eye 8
favorite 0
comment 0
This is a small gun controller attachment for use in fast-paced shooters where you may not want the bulk of a full-sized stock attachment. You can switch between rifles, pistols and grenades easily. Designed for Pavlov, you can grab the P90 foregrip unlike my previous gun controller design. The model is just under 120mm tall, so it will even fit in Monoprice's mini printers. **Update:** Strengthened the bottom clip. **Update 2:** Added a version with the same foregrip position as my original...
Topics: Video Games, vive, thingiverse, foregrip, htc_vive, controller, rifle, gun, stl, Vive_controller
7
7.0
Jan 19, 2021
01/21
by
(BManx2000)
data
eye 7
favorite 0
comment 0
New version of my Vive gun stock with attachment by a cup instead of a clip. * Adjustable height range of 3 3/4 inch (95 mm) * Adjustable length of pull from 12 inch to 15 inch (305mm to 381mm) * 100% printed construction, no fasteners or glue needed * Sling swivels, can be used to hold the stock on your person while not using it in a game * More rigid than my previous design * Can be used with my compact gun controller for the foregrip: https://www.thingiverse.com/thing:2558333 * Vertical...
Topics: Video Games, stock, swivel, vive, thingiverse, htc_vive, controller, rifle, sling, gun, stl,...
9
9.0
Jan 11, 2021
01/21
by
(BManx2000)
data
eye 9
favorite 0
comment 0
###Update This Thing is obsolete, see my improved design here: https://www.thingiverse.com/thing:2905300 *** This gun controller for the HTC Vive has the following features: * Proportions based on the M16, designed for H3VR. * Height adjustable stock with 95mm of travel. * 3 possible configurations: Rifle, Stockless, and Stocked Pistol. * Attach and detach to the controller in seconds. * No fasteners required, glue optional. * Minimal obscuration of the infrared sensors. The longest part is...
Topics: gun, vive, thingiverse, stl, Vive_controller, Video Games, stock, controller, htc_vive, rifle
9
9.0
Apr 7, 2021
04/21
by
(BTjr)
data
eye 9
favorite 0
comment 0
AKU-12 Carbine designed in SolidWorks
Topics: Rifle, stl, thingiverse, AK, Models, Gun
11
11
Apr 7, 2021
04/21
by
(BTjr)
data
eye 11
favorite 0
comment 0
TAR-21 Tavor is a relatively new assault rifle, designed by IMI to replace the Galil, M16A1 and CAR-15 assault rifles. The Tavor was created to be an extremely reliable assault rifle for use in urban environments. It was ambitiously named as TAR-21 - "Tavor Assault rifle for 21 century".
Topics: machine_gun, Assault, Rifle, TAR, stl, thingiverse, Models
31
31
Apr 7, 2021
04/21
by
(BTjr)
data
eye 31
favorite 0
comment 0
Pump action shotgun (pistol grip) Designed in SolidWorks
Topics: Rifle, stl, Arms, Shotgun, thingiverse, Models, Gun
10
10.0
Apr 21, 2021
04/21
by
(Bohrdasaplanck)
data
eye 10
favorite 0
comment 0
Here is a simple model of a Type 3 Phaser Rifle Prop from the Star Trek TNG era Films. Taken from: https://3dwarehouse.sketchup.com/model.html?id=a7cf230b5a2967125f5038a2cf78b1e4 and then modified into a single material file and not 22 materials. I have scaled it to fit with the TNG action figures I have but it can be made pretty big.
Topics: thingiverse, action figure, stl, Star Trek, voy, TNG, rifle, prop, ds9, Props, Phaser
7
7.0
Apr 5, 2021
04/21
by
(Caboose)
data
eye 7
favorite 0
comment 0
Intro and Purpose ----------- The following is an 3d printed version of an AR-15 stripper spoon, used to load AR-15 magazines. Spoons frequently get lost, and often get bent into an unusable form. A plastic replacement should not only be cheaper, but also more reliable. ____ Creation ----- In order to create this object I took actual dimensions of multiple stripper spoons and created a plastic one with some beefing up. ____ Use ----- This object is intended to assist in the loading of 10 round...
Topics: thingiverse, ar-15, magazine, clip, loading_spoon, Sport & Outdoors, rifle, spoon, stl, stripper
5
5.0
Jun 11, 2021
06/21
by
(DumnarIndustries)
data
eye 5
favorite 0
comment 0
Summary This is a complete model of the rifle from the Mandalorian in the series called: "The Mandalorian". It is obviously not perfect, but it has my own take to it. Otherwise, it is pretty much exactly the same. This model does require a couple parts, which include: a metal rod with a 1 inch diameter and one with a 1/3 inch diameter. (25mm and 10mm will also work). I just went to my local home office store and found them there. Or you can order them off of amazon. Edit: I added the...
Topics: cosplay_prop, starwars, mandalorian, rifle, star_wars, thingiverse, costume, cosplay, BabyYoda,...
41
41
Jan 16, 2011
01/11
by
(FRB) FrontRangeBouldering.com
audio
eye 41
favorite 0
comment 0
Citizen's Comp - Spot Bouldering Gym. 11/23/2005. INTERVIEWEES: Kelly Rayburn, Mike Banuelos, Athena Dodd, Angela Payne & Vanessa Compton LOCATION: Spot Bouldering Gym, Boulder, CO DATE: 11/23/2005 INTERVIEWER: Mike Brooks LENGTH: 11.44 minutes SIZE: 5.4 MB mp3 Notes: ALBUM: FRB Interviews - climbing competition, 2005 CONTACT: info@frontrangebouldering.com copyright © (FRB) FrontRangeBouldering.com
Topics: FRB Interviews - climbing competition, 2005, Spot Bouldering Gym, thespotgym.com, citizens...
260
260
Apr 26, 2009
04/09
by
(FRB) FrontRangeBouldering.com
audio
eye 260
favorite 0
comment 0
John Sherman talks about his Dead Point Magazine Blog, The Thimble, Germ Free Adolescence and continues about his DPM blog and his philosophy on climbing history, climbing style and development and political/social climate. DATE: 4/24/2009 INTERVIEWER: Mike Brooks LENGTH: 16.5 minutes SIZE: 15.4 MB mp3 ALBUM: FRB Interviews - pioneers of climbing CONTACT: info@frontrangebouldering.com copyright © (FRB) FrontRangeBouldering.com
Topics: frb interviews - pioneers of climbing, john sherman, the verm, bouldering, highball bouldering,...
55
55
Jan 1, 2011
01/11
by
(FRB) FrontRangeBouldering.com
audio
eye 55
favorite 0
comment 0
Ron Larson interviews Derek Krol at the Boulder Rock Club, Boulder, CO. 5/10/2006. INTERVIEWEE: Derek Krol DATE: 5/10/2006 LOCATION: Boulder Rock Club, Boulder, CO INTERVIEWER: Ron Larson LENGTH: 4.17 minutes SIZE: 3.9 MB mp3 Notes: I used to work with Derek. ALBUM: FRB Interviews CONTACT: info@frontrangebouldering.com copyright © (FRB) FrontRangeBouldering.com
Topics: FRB Interviews, derek krol, ron larson, sprayathon, the arsenal, rifle mountain park, colorado,...
165
165
Jan 11, 2011
01/11
by
(FRB) FrontRangeBouldering.com
audio
eye 165
favorite 0
comment 0
Johnny Goicoechea. 4/24/2006 INTERVIEWEE: Johnny Goicoechea LOCATION: Spot Bouldering Gym, Boulder, CO DATE: 4/24/2006 INTERVIEWER: Mike Brooks LENGTH: 23.16 minutes SIZE: 10.7 MB mp3 Notes: ALBUM: FRB Interviews - climbing stars CONTACT: info@frontrangebouldering.com copyright © (FRB) FrontRangeBouldering.com
Topics: FRB Interviews - climbing stars, Johnny Goicoechea, Verve, Verve Clothing, verveclimbing.com, Spot...
12
12
Jun 10, 2021
06/21
by
(FelixTheCrazy)
data
eye 12
favorite 0
comment 0
Summary "Dread not! Redemption is close at hand! Death is not the end. For you are chosen to rise and fight again among your brothers.Our greatest heroes and protectors risen to once to battle those who would wish to defeat us. And be he noble and great in his action after death, may he continue to do good works for centuries to come. A greater merging of man and machine has never been done. Metal forged by the greated hands and methods truly inspired from greatness above. And the man...
Topics: primaris, casket, rifle, coffin, marine, gun, tomb, mech, flamer, 25mm, 32mm, 30mm, thingiverse,...
6
6.0
Jan 21, 2021
01/21
by
(FiveNights)
data
eye 6
favorite 0
comment 0
(Universal) 15mm Rail Mount fit (12&20mm) red dot sight scope Hot Shoe adapter UFO Hunters or Mother Nature Spy will Love This... ;-)
Topics: canon, Hot Shoe, photography, sony, camera, hotshoe, 12mm, Rail Mount, mount, DSLR, stl, coolpix...
3
3.0
Jan 6, 2021
01/21
by
(FrontRunnerTek)
data
eye 3
favorite 0
comment 0
For when you must nosh the nuggies while taking out the enemy... or getting a good laugh from your buddies on the range. The [Picatinny Rail Dipping Sauce Holder](https://www.thingiverse.com/thing:3372887) has been around since Jan 2019, but there were requests for one to hold other sauces. In response, I've made this version, newly designed, completely in Fusion 360. The base / larger holder will hold Chick-Fil-A and similarly sized sauces (wider and longer than the original version) Using the...
Topics: ihop, stl, picatinny, accessory, saucer, pellet_gun, pellet, airsoft, picatinny_mount, Sport &...
7
7.0
Mar 17, 2021
03/21
by
(GlowingEmbers)
data
eye 7
favorite 0
comment 0
Lee Classic Turret Case Ejector I've found turret case kickers before, but there are two problems. They don't seem to fit properly in between the dies when at the top. They don't slide back down freely due to unbalanced weight. This thing is meant to address those two problems. There are two versions. One with a 6.6mm hole and one with 6.7mm hole. I've gotten the 6.6mm into the indexing rod with some force. ________ I still have two other issues with the press. The primer loader needs to be...
Topics: Pistol, Ejector, Kicker, Rifle, Turret, Case, Sport & Outdoors, LCT, stl, Lee, thingiverse,...
9
9.0
Apr 7, 2021
04/21
by
(HybridDK)
data
eye 9
favorite 0
comment 0
So, I had a hard time removing and remounting my Magpul CTR stock on my M4 airsoft rifle. Therefore, I created this tiny helping tool to easily aid the removal and remounting of this awesome Magpul CTR stock. This is a rather small item, so if it's lost or break, just print another one - hey, it only takes 4 minutes. When mounting the Magpul stock, simply press down on the locking pin inside the stock until the Magpul CTR stock remover fits as shown in the pictures. Now when pressing the...
Topics: AR15, CTR, M4, Rifle, stl, Sport & Outdoors, Magpul, thingiverse, Airsoft, Stock
12
12
Apr 12, 2021
04/21
by
(IVIUPPET)
data
eye 12
favorite 0
comment 0
Edit (2/12/14): Notice!!/Product Safety Recall :P -- Last night I broke the front hook, because I tilted the rifle too far outwards while removing to show a friend. 50% infill printed with the hook pointed up is NOT enough plastic! If used gently it can still work with the hook pointed up, but I recommend printing with supports, lying flat on the table so the layers are mostly identical, and in ABS so supports can be easily removed for maximum strength. For those interested in materials science...
Topics: thingiverse, WWII, wall_mount, Decor, Nagant, stl, wall_hook, historic, 762x54R, Mosin, airsoft,...
6
6.0
Jun 11, 2021
06/21
by
(Joemccabe)
data
eye 6
favorite 0
comment 0
Summary air rifle breach v2.0
Topics: thingiverse, air rifle, breach, stl
11
11
Jun 11, 2021
06/21
by
(Lucite)
data
eye 11
favorite 0
comment 0
Summary Attn:I have released revision 2 which can be found here http://www.thingiverse.com/thing:2042142 This is a Charger Clip for the Swiss K31 rifle. I based this design off of some reference images and some basic dimensions I found online as well as the cartridge dimensions found on the C.I.P website. It holds six 7.5 x 55mm swiss cartridges. Over all its fairly sturdy and the cartridges are held securely enough that they shouldn't fall out if held in a pocket or pouch and would probably...
Topics: k31 rifle, k31, swiss k31, swiss k31 clip, thingiverse, charger clip, stripper clip, stl
7
7.0
Jun 12, 2021
06/21
by
(M1Quel)
data
eye 7
favorite 0
comment 0
Summary I made a removable height increaser (13mm) for the Tikka t3/t3x Varmint original cheekpad. I simple glued the front piece to the cheek pad and screwed the back piece to the stock It need to be removable, otherwise you cant remove the bolt, and here is the solution. You need to cut 16mm from the front of the original cheek pad otherwise the bolt wont go back far enough. Fits like a glove! See function here: https://www.youtube.com/watch?v=951gHHuP1JM Let me know if you want a different...
Topics: stock, rifle, Tikka t3, Varmint, rest, thingiverse, bolt, action, removable, T3X, stl
7
7.0
Mar 17, 2021
03/21
by
(MarokonKauhu)
data
eye 7
favorite 0
comment 0
VSS Vintorez type sniper/assault rifle for 28 mm scale conversions
Topics: WH40K, rifle, Assault_rifle, weapon, sniper_rifle, stl, Necromunda, thingiverse, 28mm, Toy &...
7
7.0
Jun 12, 2021
06/21
by
(MattzStudioz)
data
eye 7
favorite 0
comment 0
Summary Here is a 3d Printable version of the SCAR Assault Rifle from the hit battle royale game; Fortnite! The model can be printed with PLA or ABS printing filament and is able to be sliced and printed in your preferred slicing software This download includes: 7 sections in parts to build a SCAR Prop (Super glue is best used when gluing together the segments) 1 full model of the SCAR for large printers or a minature model The model CAN be: Used as a prop for a cosplay, display, or just for...
Topics: cosplay_prop, Display, Fortnite scar, thingiverse, Scar, Assault Rifle, Cosplay, gun Prop,...
6
6.0
Mar 5, 2021
03/21
by
(Mentum)
data
eye 6
favorite 0
comment 0
High detailed laser rifle from the comic series Sage. Mag is detachable and holds with magnets.
Topics: saga, stl, comic, blaster, rifle, gun, Models, thingiverse
5
5.0
Jun 12, 2021
06/21
by
(Mentum)
data
eye 5
favorite 0
comment 0
Summary High detailed Replica of the Monte Carlo from Destiny. Movable Trigger, Mag, Visor and Sword.
Topics: game, rifle, destiny, thingiverse, games, stl
4
4.0
Jun 11, 2021
06/21
by
(Ojemine)
data
eye 4
favorite 0
comment 0
Summary AWM L115A3 - scale 1/4 Sniper rifle Print Settings Printer: BQ Hephestos Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,1mm Infill: 20% Filament: Amazon Basic PLA black
Topics: sniper, sniper_rifle, thingiverse, gun, stl
13
13
Jan 18, 2021
01/21
by
(OpfeKuacha)
data
eye 13
favorite 0
comment 0
Kar98.stl: Straight rip from game (might not print well) Kar98_Fixed.stl: Repaired with netfabb online service, suitable for 3D Printing
Topics: cosplay_weapon, Games, weapon, sniper, PUBG, Battlegrounds, thingiverse, sniper_rifle,...
5
5.0
Mar 9, 2021
03/21
by
(OrionRS)
data
eye 5
favorite 0
comment 0
Just a quick remix to convert KarnageKing's awesome Bolt Sniper Rifle into a Barrett 50 Cal style. There's an additional silenced version with long barrel versions for each. Enjoy! --------- Please consider sending tips if you enjoy the model! It definitely gives motivation to finish projects like this and to help support my 3D printing addiction. Copyright infringement is not intended. Parts are created freehand in 3d modeling software, no copyrighted product had been scanned or copied in any...
Topics: sniper, stl, thingiverse, 28mm, rifle, weapon, Toys & Games, heroic_scale, bolt, gun
5
5.0
Jun 12, 2021
06/21
by
(Robots78)
data
eye 5
favorite 0
comment 0
Summary G1 Defensor's "Fireball Cannon" weapons, reimagined for Combiner Wars/Unite Warriors Defensor. Compatible with 5mm Blast Effect parts from the War For Cybertron trilogy toy line. Download includes versions compatible with all various combiner hands styles: Perfect Effect Transform DreamWave Stock CW/UW/PotP Universal - no trigger, will work with any hand Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: Yes Resolution: 0.1mm Infill: 10% Filament: Hatchbox PLA Black...
Topics: upgrade kit, blast effect, perfect effect, weapon, rifle, combiner_wars, defensor, blaster, gun,...
3
3.0
Oct 15, 2021
10/21
by
(S1mF_0n)
data
eye 3
favorite 0
comment 0
A spacer for the MDT Oryx Chassis in 5 and 10mm + Added simplified version The standard files with the guide pins are designed with very tight tolerances so if your printer is not 100% accurate you may need to sand the pins to fit. Or you can just use the simplified files without the pins as they in my testing worked just as great;) + V4 - Better fit and finish.
Topics: mdt oryx, rifle, thingiverse, t3x, stl, oryx chassis, Sport & Outdoors, mdt, oryx, outdoor,...
9
9.0
Apr 28, 2021
04/21
by
(SADNESSOFHUMANITY)
data
eye 9
favorite 0
comment 0
I did not personally make this 3D model. You can find the the source file here: http://gamebanana.com/models/2618 I would love to see this modified for cosplay, and made printable.
Topics: GOW, thingiverse, Gears-of-war, Lancer, Longshot, stl, Locust, Gears of war, Props, Gears,...
10
10.0
Apr 28, 2021
04/21
by
(SADNESSOFHUMANITY)
data
eye 10
favorite 0
comment 0
I did not personally make this 3D model. You can find the the source file here: http://gamebanana.com/models/2392 I would love to see this modified for cosplay, and made printable.
Topics: thingiverse, Lancer, gow, Retro_Lancer, stl, GearsofWar, Assault_Rifle, Gears of war, Props
9
9.0
Mar 10, 2021
03/21
by
(SADNESSOFHUMANITY)
data
eye 9
favorite 0
comment 0
I did not personally make this 3D model. You can find the the source file here: http://gamebanana.com/models/3170 I would love to see this modified for cosplay, and made printable.
Topics: Assault_Rifle, Lancer, stl, thingiverse, Props, Hammerburst_II, GOW, Locust, Gears_of_War,...
9
9.0
Apr 28, 2021
04/21
by
(SADNESSOFHUMANITY)
data
eye 9
favorite 0
comment 0
I did not personally make this 3D model. You can find the the source file here: http://gamebanana.com/models/3170 I would love to see this modified for cosplay, and made printable.
Topics: GOW, thingiverse, Gears_of_War, Lancer, Hammerburst, stl, GearsofWar, Assault_Rifle, Locust, Props
4
4.0
Jun 11, 2021
06/21
by
(Shruikan_Loveless)
data
eye 4
favorite 0
comment 0
Summary HAHA! I lied to you! When I say a its oversized a little bit... I actually mean a lot a bit! This thing is franking massive! I mean at this point you can use it for a battering ram AND a handheld full auto cannon! This is based off of the Fortnite "Scar" Assault rifle but is not perfect. Print in a 0.4 nozzle or smaller otherwise you will end up like me lol. I printed in 0.8 because thats what was on my printer. Bad idea because all the detail is gone... I mean not all, but...
Topics: scar, rifle, lego_compatible, thingiverse, lego_minifig, LEGO, gun, Assault_rifle, stl
5
5.0
Jun 11, 2021
06/21
by
(Shruikan_Loveless)
data
eye 5
favorite 0
comment 0
Summary This is a MASSIVE machine gun used to OBLITERATE your enemies in the I can't say it because it might get pulled down because you know who is a picky mean company world! Ugh Lgo going after innocent people... If I use the word LGO this might get deleted... Warning Not in proportion... Not meant to be in proportion. MUHAHAHAHHAHAA BTRRRRRRR RAT A TAT TAT TAT RAT TAT TAT TAT RAT RAT TTTTAT. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.38...
Topics: CNC_Machine, big, rifle, massive, lego_compatible, thingiverse, lego_minifig, LEGO_Technic, LEGO,...
12
12
Jun 12, 2021
06/21
by
(Snorri)
data
eye 12
favorite 0
comment 0
Summary Want to add legos to your gun ? Try this :) Like my stuff ? Follow me ! Love it ? Tip me :) COMMERCIAL LICENSE AVAILABLE - CONTACT ME FOR MORE INFO
Topics: adaptor, fun, larp, legos, softair, adapter, rail, rifle, lrp, stl, weaver, thingiverse, lego, gun,...
4
4.0
Apr 13, 2021
04/21
by
(Terminus)
data
eye 4
favorite 0
comment 0
Plastic air rifle pellets
Topics: thingiverse, air_rifle, target, stl, Sport & Outdoors, 177, pellet
6
6.0
Jan 8, 2021
01/21
by
(Terminus)
data
eye 6
favorite 0
comment 0
Got an SLA resin printer a few weeks ago. It is capable of fine details, and printing 5 of something, or even filling the build plate with copies, doesn't take any longer than printing just one.... I was reminded of one of my older projects. https://www.thingiverse.com/thing:897037 Printing this array of 240 plastic .177 air rifle pellets took just 20 minutes. It used around 20 ml. of resin according to the software. Print quality is a thousand percent better than using filament. They fire...
Topics: sla printer, stl, .177, pellet, Sport & Outdoors, thingiverse, air rifle
5
5.0
Jan 9, 2021
01/21
by
(Terminus)
data
eye 5
favorite 0
comment 0
(2nd attempt. This project's original upload, before Christmas, wasn't published for some reason.) Got an SLA resin printer a few weeks ago. It is capable of fine details, and printing 5 of something, or even filling the build plate with copies, doesn't take any longer than printing just one.... I was reminded of one of my older projects. https://www.thingiverse.com/thing:897037 Printing this array of 240 plastic .177 air rifle pellets took just 20 minutes. It used around 20 ml. of resin...
Topics: pellets, thingiverse, resin_printer, Sport & Outdoors, 177, stl, pellet_gun, air rifle, sla...
5
5.0
Jun 19, 2021
06/21
by
(TheApropalypse)
data
eye 5
favorite 0
comment 0
Summary I modeled up the Halo 2A BR, the model was created in autodesk inventor, the scope may need to be scaled differently upon use. My Youtube Channelhttps://www.youtube.com/channel/UCdb34prSjAr6O3kk0rkkxcQ/videos
Topics: halo_3, thingiverse, halo_battle_rifle, halo, stl, halo_4, battlerifle, battle_rifle, halo_br,...
