1
1.0
Mar 6, 2022
03/22
Mar 6, 2022
by
Stephen Sadler (SadlerIn3D)
data
eye 1
favorite 0
comment 0
My son wanted to design and print these for his friends at school. We designed them using Alibre Atom3D and sliced them with Cura. Note 1: The models are printed at 214 C until layer 66, at which time the temperature decreases 2 to 3 C. The temperature is decreased in order to bridge the back of the slider channel. The temperature is adjusted back to 214 C at layer 68 to finish the last 4 layers of the print. Depending on your cooling capacity you may need to adjust the temperature more or...
Topics: Channel, PLA, one_piece, quarterback, stl, beast, single, single_print, Anycubic, moveable,...
2
2.0
Jan 19, 2022
01/22
Jan 19, 2022
by
Joel Fo (BarrelRider)
data
eye 2
favorite 0
comment 0
This is my first 'design' ever. I used Tinkercad. I really wanted to make something with moving parts that could be printed in one print, so I thought a hinge would be a good thing to try. It is, of course, an exact replica of any standard fixed pin butt hinge you'll find your house doors hanging on. 3 Sizes: 100mm x 25mm 70mm x 25mm 70mm x 20mm It was requested that I add versions without holes, which are now available too. They print flat with a tolerance of 0.4 which I found was quite tight...
Topics: fixed pin hinge, A1_printer, thingiverse, 1_print, hinge, single_print, door, print_in_place, stl,...
3
3.0
Jan 3, 2022
01/22
Jan 3, 2022
by
(TomMakotoYork)
data
eye 3
favorite 0
comment 0
You bought two laundry baskets to separate and organize clean and dirty laundry... then you wonder which basket is which. Sure there are ways to figure out what needs to be cleaned but we deserve a simple visual indicator to know whether to have them folded or tossed into the machine. This is a single print slider and no needing for assembly. Please make sure to print the object up-right (the letters are facing horizontally) to have the inner piece printed correctly. Once printed, the slider...
Topics: clean, thingiverse, laundry label, single_print, slider, laundry, label, Dirty, stl, Bathroom
2
2.0
Oct 10, 2021
10/21
Oct 10, 2021
by
Andreas Hoffelner (Antihoff)
data
eye 2
favorite 0
comment 0
Kurbeltrieb als 1 Teil gedruckt Nach dem Druck Stütze für Kurbelwangen mit einer Nagelfeile entfernen Viel Spaß beim verstehen der Kolbenbeschleunigung! crank drive to be printed as one part remove supports for wheels with a nail file enjoy learning about piston acceleration ;-)
Topics: Engineering, single_print, cylinder, stl, crank, thingiverse, motor, Kurbel
3
3.0
Sep 14, 2021
09/21
Sep 14, 2021
by
A. Becker (Canibal_knifes)
data
eye 3
favorite 0
comment 0
Because of space reasons I designed a Shelf for my Anycubic Photon S to put it on the wall. I wanted to make it really sturdy to make sure it could hold a lot of weight. It has been tested to hold up to 30kg of weight before I ran out of weights to put on it. I figured that was enough. I also made it so it can print supportless and to fit precisely on a prusa buildplate, but for smaller printers I made a multi part version. Print it at the layerhight you choose, but I went for 0,2 as it...
Topics: Anycubic, thingiverse, single_print, anycubic_photon, stl, 3D Printer Accessories, support,...
3
3.0
Sep 12, 2021
09/21
Sep 12, 2021
by
Vitorio Maric (ErOR)
data
eye 3
favorite 0
comment 0
A fully functional single print Turbo !! The current turbo version is a V3 and I feel like I've reached a point where I can share this with others. The status is set to WIP as I do plan on releasing a few more versions, maybe even a assembly version with bearings and much higher efficiency. Always open to suggestions, improvements and such, I design such things for education purposes. I will be uploading a STL shortly to print before the turbo to test your printer's clearance to ensure success....
Topics: turbine, functional_model, automotive_design, print-in-place, Car_Automotive, single print, single...
2
2.0
Jul 16, 2021
07/21
Jul 16, 2021
by
Robert Veendorp (R0B3RD)
data
eye 2
favorite 0
comment 0
This is a 'remix' of: https://www.thingiverse.com/thing:3602721 https://www.thingiverse.com/thing:4889240 I liked both ideas, especially the single file print with multiple colors of KiwiFil. Inspired by both two artworks, I designed this version (the dog-edition) from scratch more as a joke, because we have a lot of dogs so we have to watch out sometimes where we walk for their '3D prints' ;). If you use any modern slicer, there is a setting that you can enable so that your printer stops and...
Topics: funny_sign, Signs & Logos, dog_poop, Multicolor, signs, thingiverse, caution, dogs,...
2
2.0
Jul 5, 2021
07/21
Jul 5, 2021
by
3D Print Zone ZA (3DPrintZoneZA)
data
eye 2
favorite 0
comment 0
Made this cute family wall art piece for you to put up in your house. It is scaled to fit an Ender 5 Plus; but you can always modify the depth, width and height in cura slicer to suite your needs.
Topics: 2D_wallart, love, family, Decor, stl, PLA, 3D_printing, wallart, ABS, single_print, thingiverse
5
5.0
May 7, 2021
05/21
May 7, 2021
by
Will Barton (willbert6100)
data
eye 5
favorite 0
comment 0
I modified my single part N64 Cartridge stands that keeps the label visible so that you can quickly see the game you are looking to play, to work for SNES games. Feel free to comment if you have anything to add or ask. Update!!! I am now selling this on my eBay page. If you would like a stand, but aren't able to print it for some reason, please check out my ebay listing: https://www.ebay.com/itm/284286794975 Special thanks to Gamer's Paradise in Madison AL for letting me take photos in their...
Topics: 4_cart, game, low_profile, game_stand, snes, label, 6_cart, thingiverse, 5_Cartridge, single_part,...
3
3.0
May 7, 2021
05/21
May 7, 2021
by
Joe Varghese John (joe-cngr)
data
eye 3
favorite 0
comment 0
Introduction ========= Do you need a simple and effective cable storage.. Look no further :) This holder allows easy storage of cables. Just place the cable and start twisting.. need the cable, just pull the cable out.. The printing aspect is even more easier.. * East to USE ---------------------- * Easy to PRINT ---------------------- Details ===== * Its a PRINT-IN-PLACE design.. It does not need any assembly. * It does not need any support for printing. * Can start using straight out of the...
Topics: spool, cable_arranger, single_print, cable_management, cable_storage, thingiverse, Containers,...
3
3.0
Apr 25, 2021
04/21
Apr 25, 2021
by
Joe Varghese John (joe-cngr)
data
eye 3
favorite 0
comment 0
This is a rotary clutch which rotates freely in one direction and get locked in the other direction. This does not involve any assembly and is printed all in once. Works right off the bed, just add a little lubrication if needed. https://www.youtube.com/watch?v=t9SF7hxWllI
Topics: stl, oneway_clutch, single_print, DIY, clutch, rotary_clutch, thingiverse
3
3.0
Apr 25, 2021
04/21
Apr 25, 2021
by
Joe Varghese John (joe-cngr)
data
eye 3
favorite 0
comment 0
This is a rotary clutch which rotates freely in one direction and get locked in the other direction. This does not involve any assembly and is printed all in once. No support needed. Works straight off the Bed! add mild lubrication if needed. https://www.youtube.com/watch?v=t9SF7hxWllI
Topics: stl, oneway_clutch, single_print, DIY, clutch, rotary_clutch, thingiverse
3
3.0
Apr 25, 2021
04/21
Apr 25, 2021
by
Jake Ham (ApacheA117)
data
eye 3
favorite 0
comment 0
Just a little display shelf for your prized 3d prints
Topics: stl, single_print, shelf, wall_mounted, Hobby, thingiverse, display
5
5.0
Apr 14, 2021
04/21
Apr 14, 2021
by
Reign Pagaran (RisingEngineer11)
data
eye 5
favorite 0
comment 0
Print at your own risk! I would suggest using a raft, printing without supports, and having a well leveled bed before attempting to print this. The goal was to design a single-print double bearing fidget spinner, but the spacing may make it impossible to function right. Temper expectations before printing! This is experimental.
Topics: stl, single_print, toy, Toys & Games, bearing, thingiverse, fidget_spinner, spinner
4
4.0
Apr 5, 2021
04/21
Apr 5, 2021
by
Gordon Keller (gorbkeller)
data
eye 4
favorite 0
comment 0
Simple sideways tablet holder for Mavic Pro remote controller. Next version will include charge port hole for vertical tablet mount. "Full" STL is a simpler print (print sideways to avoid using any support material) and "sparse" versions (untested) requires a little bit of support towards the top if oriented on its side -- set maximum overhang to 50 deg. to avoid unnecessary support for the internal structure (which is tilted 45 deg.). Highly suggest lining the inner walls...
Topics: stl, DJI_Mavic_Pro, dji_remote_holder, single_print, no_supports, Quadcopter, dji_remote_controll,...
3
3.0
Apr 1, 2021
04/21
Apr 1, 2021
by
Alex Steele (AlexSteele)
data
eye 3
favorite 0
comment 0
Stop the print and put in the items you want to use for shaking / sound making. I used some plastic bits, you can use rice if you like. The variation between mine and the original is that you can edit this one in fusion360. Download the file, and play with the parameter settings to see how you can use math to change this and make it your own!
Topics: stl, Music, single print, embedded items, instrument, music, maraca, fusion360, thingiverse
4
4.0
Feb 24, 2021
02/21
Feb 24, 2021
by
Dylan Murray (MMouse)
data
eye 4
favorite 0
comment 0
Remix to add 22 additional USB drive slots for a total of 30, for those of us with a hoarding problem.
Topics: thingiverse, organizer, sd_card, Ender_3, micro_SD, stl, extended, Micro_SD_Card_Holder, useful,...
3
3.0
Feb 3, 2021
02/21
Feb 3, 2021
by
BYU CMR (BYU_CMR)
data
eye 3
favorite 0
comment 0
This design was developed for a safing and arming mechanism for nuclear weapons. The use of compliant mechanisms allowed the design to be scaled down with some components the size of a human hair, yet still being reliable. The design is a linear-motion large-displacement compliant mechanism. Other examples of these types of mechanisms can be found at the following link: https://www.thingiverse.com/thing:4738987
Topics: compliant_mechanism, byu, byucmr, thingiverse, Gear, single_print, engineering, stl, Engineering
3
3.0
Dec 31, 2020
12/20
Dec 31, 2020
by
cRz ROCKET (crzrocket)
data
eye 3
favorite 0
comment 0
printed at 0.2 (standard quality) i used tree supports 50m/s I scaled my one down and it printed well
Topics: single_print, stl, base, Apollo, astronaut, People, thingiverse
3
3.0
Oct 24, 2020
10/20
Oct 24, 2020
by
Roland Bagwell (Roly3)
data
eye 3
favorite 0
comment 0
I wanted to create a better double planetary gear than the one I found and printed. I am pleased with the result. The outer gears were initially generated but then manually adjusted.
Topics: single_print, stl, gadget, fidget_spinner, educational, Gear, test_print, thingiverse, Engineering,...
5
5.0
Oct 4, 2020
10/20
Oct 4, 2020
by
Teh Gün (TehGuen)
data
eye 5
favorite 0
comment 0
A parametric drawer with an optional handle that holds slim items such as smartphones. Fits inside the rectangular storage gap above the radio in the dashboard of a Fiat Panda 169 (built between 2003 and 2012). The default handle gap size of 11 mm should be a snug fit for a typical cased smartphone, but if your phone is thicker or thinner, this model is fully customizable in OpenSCAD. You can also disable the handle in case you simply want to cover that awkward gap in the dashboard. The bespoke...
Topics: cover, single_print, drawer_handle, drawer, stl, single, fiat, smartphone_holder, customizer,...
3
3.0
Aug 30, 2020
08/20
Aug 30, 2020
by
Aleksey Konovalov (konovalovaleks)
data
eye 3
favorite 0
comment 0
The toy for cats with a ball inside. The inner ball and patterned edges make some noise while moving that cats like. You must use supports for printing it.
Topics: cat, single_print, ball, stl, toy, Toys & Games, pet, thingiverse, openscad, cat_toy
3
3.0
Aug 16, 2020
08/20
Aug 16, 2020
by
Will Barton (willbert6100)
data
eye 3
favorite 0
comment 0
I needed some push-up bars that would grip my carpet while exercising. I was doing push-ups normally but having my hands flat on the ground were hurting my wrists. Not going to lie I was worried about the strength of these things but I was able to do a push-up with both hands on one bar in the center with no discernible flexing, at 40% infill (I weigh about 250lbs). Note that at 40% infill they take a little while to print out but it prints easy without supports.
Topics: push-up, push-up_bars, pushup_bar, carpet_teeth, thingiverse, carpet_grip, carpet, toothed_grip,...
3
3.0
Jul 4, 2020
07/20
Jul 4, 2020
by
Al Ho (findme1)
data
eye 3
favorite 0
comment 0
RECOMMENDED PRINT: (I used an out of the box ender 3, so it should print for most.) Layer Height: 0.12mm (Super quality in your slicer program, I use cura.) Nozzle Diam: 0.4mm Supports: YES (Use your slicers auto generated supports. It only adds about 15-20 min) USE A RAFT/Floor for your print to keep the first few layers from messing up. I used the raft setting in cura. This is basically a dual layered 3d voronoi sphere I made in blender. I am working on some ideas around it. This one prints...
Topics: sculpture, thingiverse, stl, experiment, sphere, toy, single_print, strong, art, education, Fast,...
3
3.0
Jul 1, 2020
07/20
Jul 1, 2020
by
Ganondorf Hyrule (warlockpunched)
data
eye 3
favorite 0
comment 0
Thanks to @Kemmotar for the excellent design of the original. I made a few different sizes, and decided to put my Ender Extender kit to work. The result is marvelous. 30% Infill was used here, in Cubic Subdivision arrangement. I only did two bottom layers and two top layers, and a single wall width. Now, keep in mind, you'll need to double those numbers if you're using a normal 0.4mm nozzle; I was using a 0.8mm nozzle, so a "single wall" for me is 0.8mm, not 0.4mm. I printed in 0.4mm...
Topics: refrigerator, thingiverse, kitchen, stl, Frigidaire, shelf, Kitchen & Dining,...
3
3.0
Jun 25, 2020
06/20
Jun 25, 2020
by
Karolis G. (silorak10)
data
eye 3
favorite 0
comment 0
This is print-in-place earphone case with hinges for opening and snap to close. Dimmensions are 60 mm width and 26 mm height. One (thin) version is with 1 mm walls and other with 1.5 mm walls and 2 mm top and bottom as thin version for me was too fragile.
Topics: stl, hinges, single_print, Audio, earphone, Earphones_case, hinge, printinplace, earphones_box,...
3
3.0
Jun 23, 2020
06/20
Jun 23, 2020
by
Christoffer Rahbek (stesser)
data
eye 3
favorite 0
comment 0
This print improves the quality of your electric toothbrush experiance by adding a good functioning capsule that has perks and charm. This is a version 1 and the post processing is very advanced.
Topics: Bathroom, thingiverse, toothbrush, oral_b, hygene, stl, oral-b, single_print, toothbrush_holder,...
3
3.0
Jun 11, 2020
06/20
Jun 11, 2020
by
An Cs (Turbo_SunShine)
data
eye 3
favorite 0
comment 0
This is my print in place PCB-Holder, ** See it in action, and get all the info here: https://youtu.be/jN2l7cCoVB4 ** There is a GoPro-Mounted version, and a Stand version. (stand version has 70deg overhang, but it is printable with a standard ender 3 +pla and no supports) Recommended print settings: No suports! **All clearances are 0.3mm or more** - Ad horizontal expansion as needed. **Simplified-3D users:** S3D might have issues with intersecting bodies go to Mesh > Separate Connected...
Topics: electronics, GoPro, pcb, single print, pcb_holder, GoPro_Mount, stl, thingiverse, print_in_place,...
3
3.0
Jun 9, 2020
06/20
Jun 9, 2020
by
(MCP90)
data
eye 3
favorite 0
comment 0
This is a simple and sturdy noisy toy ball for cats made to be printed in one piece, included the smaller sphere inside it. After printing it use a screwdriver to do a "TAP" from the bottom hole to separate the two spheres. IF YOUR CAT LIKED IT CONSIDER TO OFFER ME A BEER: https://paypal.me/mastercontrol90
Topics: noisy, stl, single_print, toy, Pets, thingiverse, cat, ball
3
3.0
May 13, 2020
05/20
May 13, 2020
by
Andrea Piccinno (LuNdreu)
data
eye 3
favorite 0
comment 0
Just a pair of vintage glasses, printable as a single piece. They fit circular lenses with diameter 49mm (you can see a pair mounted in picture). If you need different size, just contact me. I also made a detailed/articulated model that can be printed flat on the bed as a single part. Then if can be folded/closed as a normal pair of glasses, without any post processing. This version of glasses is designed to be printed without supports. In pictures you can see both the printed result and the...
Topics: sunglasses, vintage, glasses, Articulated, circular, single_print, thingiverse, Glasses,...
3
3.0
Apr 18, 2020
04/20
Apr 18, 2020
by
Daniel Bajo (danielbajocollados)
data
eye 3
favorite 0
comment 0
I know this comes a little late, but I just saw that NoTouchChallenge and thought I could share this. It might prove usefull for somebody. As you can see it´s a gripper made to be extruded as a single print. It´s basically disegned as pliers, but oversized. To close it you would just push those grips and to open it there´s a little piece meant to be a little elastic. However, i must say that it has not been tested since i don´t have currently access to a 3D printer. I´d love to recieve...
Topics: thingiverse, gripper, madewithfusion360, COVID19, NoTouchChallenge, 3D Printing, stl,...
3
3.0
Apr 13, 2020
04/20
Apr 13, 2020
by
Julius Howlett (3E8)
data
eye 3
favorite 0
comment 0
I've designed many dice towers over the years, and I particularly love this one. Here's why: 1. It is perfectly functional, dice do not get stuck 2. It prints in one go, in your typical entry level resin printer 3. It's hinged, so it stows neatly inside a board game box like Monopoly Here's a vid of it in action: https://youtu.be/4-Fqu55zQhY I have paid meticulous attention to every detail of its design, but I'm still open to feedback. If you found this useful, it would bring me great joy to...
Topics: thingiverse, dice tower, stl, single print, Dice, hinged dice tower
4
4.0
Mar 26, 2020
03/20
Mar 26, 2020
by
Ian Sanderson (SaintsWarcry)
data
eye 4
favorite 0
comment 0
A simple single print sponge holder to keep your kitchen sponge from growing mildew. Designed for a two compartment sink with a divider.
Topics: kitchen_sink, thingiverse, sponge, sponge_holder, kitchen, Organization, single_print, sink, stl
4
4.0
Jan 26, 2020
01/20
Jan 26, 2020
by
Griffin Brown (Mapleguy)
data
eye 4
favorite 0
comment 0
A small hinge I designed in Fusion 360 to test my Ender 3. This print is designed for 0.2mm layer heights and the vertical gaps between the parts are 1 layer, so 0.2mm. This is far from a torture test, but it isn't the easiest print either, so it might be useful for some sort of testing. Probably part cooling and fusing tests.
Topics: thingiverse, print_test, 3D Printing Tests, hinge, single_print, stl, test
5
5.0
Jan 18, 2020
01/20
Jan 18, 2020
by
Colby Wheaton (ColbyW05)
data
eye 5
favorite 0
comment 0
I mean... It's a panpipe, not a very good one, but still a panpipe. P.s. I honestly don't know if it works or not...
Topics: physics_demonstration, panflute, single_print, WIP, demonstration, thingiverse, 3D Printing,...
3
3.0
Dec 31, 2019
12/19
Dec 31, 2019
by
hasan daoud (abu3ali)
data
eye 3
favorite 0
comment 0
flex moose. one print. have fun.
Topics: single_print, stl, flexible, thingiverse, DIY
3
3.0
Dec 31, 2019
12/19
Dec 31, 2019
by
hasan daoud (abu3ali)
data
eye 3
favorite 0
comment 0
gearbox keychain. for gear lovers.
Topics: thingiverse, gears, Keychains, Gear, delta, single_print, stl, keychain
3
3.0
Dec 31, 2019
12/19
Dec 31, 2019
by
hasan daoud (abu3ali)
data
eye 3
favorite 0
comment 0
flex trex. one print. have fun.
Topics: thingiverse, flexible, DIY, single_print, stl
3
3.0
Dec 9, 2019
12/19
Dec 9, 2019
by
Seth (Anglesmith_Customs)
data
eye 3
favorite 0
comment 0
This is a work in progress. I have not yet printed this. I designed this in AutoCAD during a slow day at work. I based this loosely on a EK9 Civic Type R but AutoCAD is not the best when it come to modeling cars. It should print all in one print with moving wheels. It may need to have the scale adjusted. I will re-upload this once I have fixed my printer and made a test print. If you print one, please post it up!
Topics: thingiverse, honda, Vehicles, car, toy_car, hatchback, one_print, civic, ek9, moving_parts,...
4
4.0
Nov 11, 2019
11/19
Nov 11, 2019
by
Julian Ewers (ewerspej)
data
eye 4
favorite 0
comment 0
Just a very simple ball bearing, still with minor imperfections. Works quite well for my first mechanical design. When building, supports should be added only to the balls to keep them in place, because the contact area on the first layers will otherwise be too small and thus the first layers might lose adhesion and ruin the build.
Topics: stl, blender, thingiverse, diy, bearing, ball_bearing, no_assembly_required, single_print, DIY
3
3.0
Oct 6, 2019
10/19
Oct 6, 2019
by
Michael Carrozza (FlyMike)
data
eye 3
favorite 0
comment 0
Inspired by other print in place fidget spinners that I cant seem to find links for now... I recommend test printing just my bearing first before printing one of these with 100% infill. https://www.thingiverse.com/thing:3898734
Topics: stl, fidget, 3d_printer, fidget_spinner, thingiverse, fidget_hand_Spinner, helical, fusion_360,...
3
3.0
Oct 5, 2019
10/19
Oct 5, 2019
by
Michael Carrozza (FlyMike)
data
eye 3
favorite 0
comment 0
Yet another simple helical bearing, inspired by all the others already out their. Wanted to give modeling one on my own in Fusion360 with the helical add on a whack.
Topics: stl, part, gears, thingiverse, helical, fusion_360, Engineering, bearing, preassembled,...
3
3.0
Sep 15, 2019
09/19
Sep 15, 2019
by
will lawson (WJLawson)
data
eye 3
favorite 0
comment 0
This is a rudimentary design of the legendary unicron, destroyer of worlds ! the model consists of three stl files, the consumer of planets file contains the main figure already pre-assembled. the remaining two stl files consist of the outer ring of unicron in two halves, the sides are the same so you would only need to download one of the two files however. the figure its self is print in place and is mainly one print however, depending on the build volume of your printer you may be able to...
Topics: stl, transformer, transforming, Model Robots, thingiverse, robot, print in place, single print,...
4
4.0
Jul 27, 2019
07/19
Jul 27, 2019
by
Ethan Shipley (Sephytester)
data
eye 4
favorite 0
comment 0
Shock Absorber i made to see how a single print piece of a car's suspension would work. Print: Rafts help with stopping flat sides Supports help to keep the round shape and the springs to print and hold together Does work, I have printed it in many sizes many times and every time has successfully worked. Happy printing and maybe, it'll help with your next project -Ethan
Topics: thingiverse, Vehicles, single_print, stl, vehicle
4
4.0
Jun 11, 2019
06/19
Jun 11, 2019
by
bart oudkerk (bart1998)
data
eye 4
favorite 0
comment 0
# A simple single piece Spool Holder There are tons of spool holders to find on the internet. But i wanted one that was simple to use without moving parts. So i designed my own. It isn't the most beautiful spool holder but it works great. **This spool holder works for spools of 80mm with and 200mm diameter. A bit larger might work, but that is not tested. It also works with smaller spools.** This spool holder is designed to be simple in use and simple to print with not too much filament. On my...
Topics: holder, stl, single_print, 3D Printer Accessories, simple, thingiverse, spool_holder,...
4
4.0
Jun 8, 2019
06/19
Jun 8, 2019
by
Will Barton (willbert6100)
data
eye 4
favorite 0
comment 0
I have looked around the internet for some single part N64 Cartridge stands that keeps the label visible so that you can quickly see the game you are looking to play. I could not find any that solved that problem so I decided I would make one. Currently I only have eight N64 games so I just made two stands that hold 4 cartridges each. I have created 5 and 6 cart versions but I have not tested these out and they probably will take a long time to print. I have also uploaded the .prt files which...
Topics: stl, 6_Cartridge, single_print, 4_cartridge, Video Games, 5_Cartridge, cart, single_part,...
4
4.0
May 29, 2019
05/19
May 29, 2019
by
An Cs (Turbo_SunShine)
data
eye 4
favorite 0
comment 0
This is a print in place box! No need to assemble it, just print it and use it! Please see the release video, there is some useful info, and a better look at the box in it: https://youtu.be/eFSzj8m3s70 You can find the more "authentic" but assembly requiring box inspired by the movie Mulholland drive here: https://www.thingiverse.com/thing:3660543 Try printing the test piece first, to make sure you can print all the hinges and locking mechanism, if it doesn't work at first, try...
Topics: Household, thingiverse, stl, print_in_place, single_print, Storage_Box, box
4
4.0
May 22, 2019
05/19
May 22, 2019
by
Micah Phillips (Pistolbear)
data
eye 4
favorite 0
comment 0
Just testing out a Blender->STL->Print workflow. Made a quick asymmetrical little box in Blender. Will print updates to this as I actually print and learn stuff about it.
Topics: stl, thingiverse, box, small, Containers, single_print
5
5.0
May 12, 2019
05/19
May 12, 2019
by
Rebecca Bone (rfb221)
data
eye 5
favorite 0
comment 0
Simple ankle boot with an open heel and diamond tread pattern. Shoes are scalable but created to fit a 7.5/8 women's size. Fits into a Dremel 3d45 Idea Builder, single part print does not need support structures but recommend plate adhesive. Takes about 17 hours to make.
Topics: stl, thingiverse, Fashion, single_print, one part, shoes
5
5.0
May 6, 2019
05/19
May 6, 2019
by
BYU CMR (BYU_CMR)
data
eye 5
favorite 0
comment 0
Please take a 2 min survey to help us know how we can offer more models like this! https://goo.gl/forms/MiyWYwno927Wb4TH2 This two degree-of-freedom pointer device uses compliant mechanism technology to obtain its motion. It was developed by the BYU Compliant Mechanisms Research group (compliantmechanisms.byu.edu), under a grant from NASA. 3 versions of the device are included: the original file used in the metal prototype, and two modified versions for FDM printing with an improved output...
Topics: engineering, thingiverse, Engineering, engineer, rocket, spacex, Spaceship, cmr, mechanical,...
