5
5.0
Jun 11, 2021
06/21
by
(R1mm0)
data
eye 5
favorite 0
comment 0
Summary A piece of terrain that has long been needed for fans of undead-scifi-robots. My first upload so please leave feedback on to help me develop and improve on future uploads. Also tell me what other objects you would like for your table. files have been uploaded with the best orientation to avoid supports or minimal supports. The center tower should be the only file that needs supports checked. Try the "Custom Supports" add-on in Cura to selectively place supports. Please follow...
Topics: necrontyr, Terrain, warhammer40k, wargame_model, scifi, warhammer 40k, Necron, wargame_terrain,...
5
5.0
Jun 11, 2021
06/21
by
(Rebbe_KhUA)
data
eye 5
favorite 0
comment 0
Summary Plasma Pistol Necromunda version for cosplay
Topics: warhammer40k, wargames, wargame, 40k, scifi, tabletop, Necromunda, thingiverse, cosplay, wargaming,...
6
6.0
Jun 11, 2021
06/21
by
(Redstarkits)
data
eye 6
favorite 0
comment 0
Summary A more civilian based version of the ant (though it could be military) A flat bed design with the option of a set of rails round the top or fully open. Also a slection of boxes and barrels you can print of seperatly and use how you like Also i have ajusted the legs, the files were not contected as well as i would like. You can use these legs on any of the other Ants. available here: https://www.thingiverse.com/thing:3468044https://www.thingiverse.com/thing:3549405 Also you can add a...
Topics: mech, battle, wargame, model, scifi, star_wars, science_fiction, thingiverse, battletech,...
9
9.0
Jun 12, 2021
06/21
by
(Redstarkits)
data
eye 9
favorite 0
comment 0
Summary A simple remix of the missile Ant, this one has a skip for civilian use. I thought it looked quite good, and could look grea as a bit of scenery for wargamign or a diorma in it own right, with crew and a sci-fi mining site. Its complatable with other parts available herehttps://www.thingiverse.com/thing:3580887https://www.thingiverse.com/thing:3516695https://www.thingiverse.com/thing:3484766
Topics: warhammer40k, WH40K, wargame, 40k, thingiverse, battletech, wargaming, sci-fi, warhammer_40k, stl
3
3.0
Jan 5, 2021
01/21
by
(Roundpiece)
data
eye 3
favorite 0
comment 0
This is one of the more complex builds I have made this far. Looking around I did not find gates or walls just the way I would like them. So well, I made some myself. I have designed them to be easy to assemble on the tabletop. They are rather sturdy and should not tumble over easely. Printing and assembly ------------------------------ I have printed the wall, gate, and gate bridge on my Ender 3. The door are print on my Anycubic Photon. When assembling the gate, doors and gate bridge i have...
Topics: dnd, Roleplaying, Toys & Games, stl, wall, miniature, miniature_28mm, 28mm, city,...
7
7.0
Jun 11, 2021
06/21
by
(randomperson42)
data
eye 7
favorite 0
comment 0
Summary 28mm Ultramarine themed power swords. Both right and left hand variants.
Topics: wargame, ultramarines, 28mm, tabletop, thingiverse, power_sword, Gladius, tabletop_gaming, stl
6
6.0
Jun 11, 2021
06/21
by
(randomperson42)
data
eye 6
favorite 0
comment 0
Summary I made this for a friend who wanted to make a custom emperors champion. The hand came from another mode, I don't remember which model it was.
Topics: wargame, 28mm, tabletop, thingiverse, tabletop_gaming, stl
Naval Postgraduate School
15
15
Feb 2, 2021
02/21
by
Clark, Lloyd Neil; Pless, Larry Douglas; Rapp, Robert Lee
texts
eye 15
favorite 0
comment 0
This thesis develops the software capability to allow the investigation of C3 problems, procedures and methodologies. The resultant communications model, while independent of a specific wargame, is currently implemented in conjunction with the McClintic Theater Model (MTM). It provides a computerized message handling system (C3 model) which allows simulation of communication links (circuits) with user-definable delays; garble and loss rates; and multiple circuit types, addresses and levels of...
Topics: C(3) model, Communications processor, Message garble, Message loss, Wargame, Circuit parameters
2
2.0
Sep 14, 2021
09/21
by
R. B. (Statistiker)
data
eye 2
favorite 0
comment 0
Hi there! I designed these Scheme Markers for my Malifaux Performers Crew. I also use them as Markers for Fallout Wasteland Warfare. They are on 30mm Bases and so fit both games without rescaling. Just apply some paint, sand, texture paint, maybe a 3d printed cactus aaaand of course an advertisement of whatever you want. Have fun!
Topics: stl, thingiverse, tabletop, wargaming, malifaux, wasteland_warfare, token, objective_marker,...
6
6.0
Mar 22, 2021
03/21
by
RAFFAELE PETROLO (lelex673)
data
eye 6
favorite 0
comment 0
Hi, this is a RC Boats inspired to torpedo boat. the boat's lenght is 670mm i just want create a new bridge more detailed and with motorized cannon, but for now enjoy this!! Look my other rc boats: https://www.thingiverse.com/thing:3725323 https://www.thingiverse.com/thing:3601624
Topics: wargaming, stl, RC_Boat, boat, wargame, Radio_Control, torpedo, R/C Vehicles, thingiverse
5
5.0
Jan 16, 2021
01/21
by
ROBSON EUGENIO (rlecps2011)
data
eye 5
favorite 0
comment 0
This is a wall terrain for wargaming like warhammer.
Topics: Terrain, thingiverse, warhammer, Toys & Games, wargaming, wargame_terrain, stl
5
5.0
Mar 15, 2021
03/21
by
Raffaelle CharmyMan (RisingForce88)
data
eye 5
favorite 0
comment 0
Single pose character , satyr , he is crazy, mad, he likes wine, beer and mud!. You can use it for your NPC RPG or whatever you want. This file is created by myself, inspire by greek myths and stuff like that. This file contains one single mesh (posed character), this file does not include any base support, any slider's profile attached to it. This file can be scale it up if you want. This file can be printed for PLA usage or Resin. IMPORTANT : this file needs to be "SOLID" , so try...
Topics: miniature, thingiverse, miniwargaming, dnd_miniature, wargame, miniatures, stl, Toys & Games
4
4.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 4
favorite 0
comment 0
An office tower designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 10 hex locations. It is 9 levels tall if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Further, there is a second variation of this building, uploaded as “Office Tower 2B” here:...
Topics: tabletop, mecha, 6mm, Skyscraper, mech, wargame, Buildings & Structures, office, thingiverse,...
6
6.0
Jun 6, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 6
favorite 0
comment 0
Watch towers designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the buildings are flat enough to support a unit placed on top for playability. The A versions are 2 levels tall and the B versions are 3 levels tall if you're playing a specific mecha tabletop game. There are four files. One of each building both with and without hexes so that you can print the one that fits your playstyle. I advise printing these in resin if possible because they are small enough that they...
Topics: tower, base, guard, wargaming_terrain, outpost, american_mecha, guard_tower, wargaming, Buildings...
5
5.0
Jun 6, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 5
favorite 0
comment 0
A radome designed to be 3D printed as terrain for 6mm tabletop gaming. These provide great scatter terrain to add detail to your military bases. It also looks great in an open field as extra cover. The top of the B version is flat and can support a unit placed on top for playability. It is 2 levels tall if you're playing a specific mecha tabletop game. There are four files. One of each building both with and without hexes so that you can print the one that fits your playstyle. Remember to print...
Topics: base, wargaming_terrain, american_mecha, aircraft, wargaming, Buildings & Structures, hex,...
3
3.0
Jun 10, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 3
favorite 0
comment 0
A classy Chinese restaurant to add to your city, this building is designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support placing units on top in all hexes for playability. It is 1 level tall if you're playing a specific mecha tabletop game. There are four files. One has the building on hexes, another is hexless so that you can print the one that fits your playstyle, and there are two more versions that have the text removed from...
Topics: restaurant, china, shop, tabletop, food, mecha, 6mm, mech, wargame, Buildings & Structures,...
4
4.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 4
favorite 0
comment 0
An office tower designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 10 hex locations. It is 9 levels tall if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Further, there is a second variation of this building, uploaded as “Office Tower 2A” here:...
Topics: tabletop, mecha, 6mm, mech, wargame, Buildings & Structures, office, thingiverse,...
4
4.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 4
favorite 0
comment 0
A water tower designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 7 hex locations. It is 7 levels tall if you're playing a specific mecha tabletop game. The model units are in mm and it is scaled such that the hexes are 33mm from flat-to-flat, which is perfect for modern hex maps using 33mm hexes. You can always resize it if your hexes are slightly smaller/larger. Please post pictures and leave...
Topics: structure, wargame_terrain, tabletop, 6mm, mech, wargame, Buildings & Structures, thingiverse,...
4
4.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 4
favorite 0
comment 0
An apartment building designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 19 hex locations. It is 2 levels tall if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Further, there is a second variation of this building, uploaded as “Residential Tower 4A” here:...
Topics: tabletop, mecha, 6mm, mech, wargame, Buildings & Structures, thingiverse, tabletop_gaming,...
3
3.0
Jun 20, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 3
favorite 0
comment 0
A nice little tea shop for anywhere in the universe, this building is designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top. It is 1 level tall if you're playing a specific mecha tabletop game. There are four files. One has the building on hexes, another is hexless so that you can print the one that fits your playstyle, and there are two more versions that have the text removed from the front of the...
Topics: tabletop_terrain, thingiverse, wargaming, Buildings & Structures, epic_scale, tabletop_gaming,...
4
4.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 4
favorite 0
comment 0
An office tower designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 7 hex locations. It is 8 levels tall if you're playing a specific mecha tabletop game. This tower is modeled in a modern style and could be considered "fancy" since the floors/windows are nearly double height. Doing this also reduces the amount of work required if you paint the windows. If you do paint it, I suggest...
Topics: tabletop, 6mm, Skyscraper, mech, wargame, Buildings & Structures, office, thingiverse,...
3
3.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 3
favorite 0
comment 0
A mixed use building designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 10 hex locations. It is 3 levels tall if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Further, there is a second variation of this building, uploaded as “Mixed Use Building 1B” here:...
Topics: retail, tabletop, mecha, 6mm, mech, wargame, Buildings & Structures, mixed_use, thingiverse,...
3
3.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 3
favorite 0
comment 0
An apartment building designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 13 hex locations. It is 6 levels tall if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Further, there is a second variation of this building, uploaded as “Residential Tower 3B” here:...
Topics: tabletop, mecha, 6mm, mech, wargame, Buildings & Structures, thingiverse, tabletop_gaming,...
3
3.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 3
favorite 0
comment 0
An office tower designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 14 hex locations. It is 4 levels tall on the shorter section and 6 levels tall on the taller section if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Further, there are second and third variations of...
Topics: tabletop, mecha, 6mm, mech, wargame, Buildings & Structures, office, thingiverse,...
6
6.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 6
favorite 0
comment 0
These are poseable turrets for use with my dropship model(s). There's a variety of bases and weapons so that you can mix and match them to arm your dropship any way you'd like. Pictured above are mech-scale turrets printed in resin and posed on an FDM mech-scale dropshop model. The available turrets include lasers, PPCs, autocannons, gauss rifles, LRMs, and SRMs. I have also included a radome/sensor turret and a blank turret base in case you want a turret mount to be occupied but don't want to...
Topics: Vehicles, tabletop, mecha, 6mm, mech, wargame, assault, thingiverse, tabletop_gaming, aerodyne,...
5
5.0
Jun 10, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 5
favorite 0
comment 0
In the 31st century, this originally Canadian business has rebranded to be even more popular! This building is designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support placing units on top for playability. It is 2 levels tall on the higher levels and 1 level tall on the lower levels if you're playing a specific mecha tabletop game. This is a two part print. Part 1 of the building can be used standalone as any large commercial...
Topics: shop, retail, tabletop, mecha, 6mm, oil_change, cars, automotive, mech, wargame, canadian, car,...
5
5.0
Jun 10, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 5
favorite 0
comment 0
Need an oil change or tire rotation? This business has got you covered whether you're driving a wheeled vehicle or a hovercar. This building is designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support placing units on top in all hexes for playability. It is 1 level tall if you're playing a specific mecha tabletop game. There are four files. One has the building on hexes, another is hexless so that you can print the one that fits...
Topics: shop, retail, lube, tabletop, mecha, 6mm, oil_change, lubricant, mech, american, wargame, canadian,...
2
2.0
Nov 8, 2021
11/21
by
Raining Fire (RainingFire)
data
eye 2
favorite 0
comment 0
The perfect restaurant for watching S7 broadcasts or kicking back with the local mercs for a beer. This building is designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support placing units on top in all hexes for playability. The top of version B has additional supports for two edge hexes for extra stability. It is 1 level tall in most areas, except for the front two hexes where it is 1.5 levels tall, if you're playing a specific...
Topics: commercial, barbecue, terrain, canadian, beer, pub, epic_scale, wargame, micro_armor, shop, bbq,...
5
5.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 5
favorite 0
comment 0
An apartment building designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 9 hex locations. It is 3 levels tall if you're playing a specific mecha tabletop game. The model units are in mm and it is scaled such that the hexes are 33mm from flat-to-flat, which is perfect for modern hex maps using 33mm hexes. You can always resize it if your hexes are slightly smaller/larger. Please post pictures and...
Topics: tabletop, 6mm, mech, wargame, Buildings & Structures, thingiverse, tabletop_gaming,...
3
3.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 3
favorite 0
comment 0
A library building designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 23 hex locations. It is 6 levels tall if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Further, there is a second variation of this building, uploaded as “Library 1B” here:...
Topics: tabletop, mecha, 6mm, public_library, mech, wargame, school, Buildings & Structures, college,...
2
2.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 2
favorite 0
comment 0
An apartment building designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 13 hex locations. It is 6 levels tall if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Further, there is a second variation of this building, uploaded as “Residential Tower 2A” here:...
Topics: tabletop, mecha, 6mm, mech, wargame, Buildings & Structures, thingiverse, hotel,...
4
4.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 4
favorite 0
comment 0
An office tower designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 7 hex locations. It is 6 levels tall if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Notable features: -Detailed design including doors, windows, loading docks, steps to raised entrances at the...
Topics: tabletop, mecha, 6mm, mech, wargame, Buildings & Structures, office, thingiverse,...
4
4.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 4
favorite 0
comment 0
An office tower designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 10 hex locations. It is 4 levels tall on the shorter section and 6 levels tall on the taller section if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Further, there is a second variation of this...
Topics: tabletop, mecha, 6mm, mech, wargame, Buildings & Structures, office, thingiverse,...
4
4.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 4
favorite 0
comment 0
An office tower designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 10 hex locations. It is 7 levels tall if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Further, there is a second variation of this building, uploaded as “Office Tower 5A” here:...
Topics: tabletop, mecha, 6mm, mech, wargame, Buildings & Structures, office, thingiverse,...
4
4.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 4
favorite 0
comment 0
An office tower designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 14 hex locations. It is 6 levels tall if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Further, there are second and third variations of this building, uploaded as “Office Tower 3A” and...
Topics: tabletop, mecha, 6mm, mech, wargame, Buildings & Structures, office, thingiverse,...
4
4.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 4
favorite 0
comment 0
An office tower designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 14 hex locations. It is 4 levels tall if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Further, there are second and third variations of this building, uploaded as “Office Tower 3B” and...
Topics: tabletop, mecha, 6mm, mech, wargame, Buildings & Structures, office, thingiverse,...
4
4.0
Jun 10, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 4
favorite 0
comment 0
Always waiting to spring up on their enemy, this restaurant chain seems to spread all across the sphere. This building is designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for the hex locations. It is 1 level tall if you're playing a specific mecha tabletop game. There are four files. One has the building on hexes, another is hexless so that you can print the one that fits your playstyle, and there are...
Topics: restaurant, shop, tabletop, food, mecha, 6mm, mech, wargame, Buildings & Structures, fast_food,...
2
2.0
Nov 8, 2021
11/21
by
Raining Fire (RainingFire)
data
eye 2
favorite 0
comment 0
The best "coffee-like" substance, imported from Trell I, is available at this small corner shop! Go check Sarna - it's real. This building is designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support placing units on top in all hexes for playability. It is 1 level tall if you're playing a specific mecha tabletop game. There are two versions, A and B. They are essentially mirrors of each other so that the shop doors can...
Topics: commercial, coffee_shop, fast_food, terrain, java, fast_food_restaurant, epic_scale, wargame,...
4
4.0
Jun 6, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 4
favorite 0
comment 0
A small fortified generator building designed to be 3D printed as terrain for 6mm tabletop gaming. It's a great addition to your tabletop base. The top of the building is flat enough to support units placed on top for playability. It is 1 level tall if you're playing a specific mecha tabletop game. There are two files. One of each building both with and without hexes so that you can print the one that fits your playstyle. I advise printing these in resin if possible because they are small...
Topics: base, wargaming_terrain, american_mecha, airbase, wargaming, Buildings & Structures, hex,...
6
6.0
Jun 10, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 6
favorite 0
comment 0
Watch towers designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the buildings are flat enough to support a unit placed on top for playability. The A versions are 2 levels tall and the B versions are 3 levels tall if you're playing a specific mecha tabletop game. There are four files. One of each building both with and without hexes so that you can print the one that fits your playstyle. I advise printing these in resin if possible because they are small enough that they...
Topics: military, watchtower, tabletop, mecha, outpost, 6mm, spaceport, mech, wargame, Buildings &...
5
5.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 5
favorite 0
comment 0
A mixed use building designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 7 hex locations. It is 2 levels tall if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Further, there is a second variation of this building, uploaded as “Mixed Use Building 2B” here:...
Topics: retail, tabletop, mecha, 6mm, mech, wargame, Buildings & Structures, mixed_use, thingiverse,...
4
4.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 4
favorite 0
comment 0
An apartment building designed to be 3D printed as terrain for 6mm tabletop gaming. This is an alternate version of a previous tower I posted. The first tower printed nearly perfectly with no supports at 1.2mm layer height on an FDM printer. This one should be the same, though you can probably decrease the resolution to 0.2mm or more. I had already designed this when the first version was posted, but based on feedback have altered a few small things to make it even more easily printable. The...
Topics: tabletop, 6mm, mech, wargame, Buildings & Structures, thingiverse, tabletop_gaming,...
4
4.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 4
favorite 0
comment 0
An apartment building designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 13 hex locations. It is 6 levels tall if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Further, there is a second variation of this building, uploaded as “Residential Tower 2B” here:...
Topics: tabletop, mecha, 6mm, mech, wargame, Buildings & Structures, thingiverse, tabletop_gaming,...
3
3.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 3
favorite 0
comment 0
The "Interrupter" attack dropship. At 69m in diameter and 61.5m in height, this medium sized dropship boasts more firepower than the similar "Unity" dropship. This proxy model is designed for a specific mecha tabletop game and represents a certain vessel class. The files are provided in both map-scale and mech-scale. The details show up well in both scales. Please post your makes and leave feedback so that people can see the results and compare settings! I'd love to see...
Topics: Vehicles, tabletop, mecha, 6mm, mech, wargame, assault, thingiverse, tabletop_gaming,...
3
3.0
Jun 20, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 3
favorite 0
comment 0
A cute little Japanese restaurant for anywhere in the universe, this building is designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 4 hex locations. It is 1 level tall if you're playing a specific mecha tabletop game. There are four files. One has the building on hexes, another is hexless so that you can print the one that fits your playstyle, and there are two more versions that have the text...
Topics: soup, tabletop_terrain, thingiverse, wargaming, Japanese, Japan, Buildings & Structures,...
3
3.0
Jun 20, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 3
favorite 0
comment 0
In the 31st century, some Canadian descendants seem to have rebranded this coffee chain. This building is designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 3 hex locations. It is 1 level tall if you're playing a specific mecha tabletop game. There are four files. One has the building on hexes, another is hexless so that you can print the one that fits your playstyle, and there are two more...
Topics: tabletop_terrain, thingiverse, Canadian, wargaming, Buildings & Structures, epic_scale,...
5
5.0
Jul 3, 2021
07/21
by
Raining Fire (RainingFire)
data
eye 5
favorite 0
comment 0
[INCOMING TRANSMISSION] --- New radio telescopes have been constructed to survey the stars, track for jumpship signatures, and track in-system dropships by their engine emissions. They may be refitted for hyperspace transmission. --- [END TRANSMISSION] This is a snap-together model designed to be 3D printed as terrain for 6mm tabletop gaming. It's perfect for an open field, spaceport, or any tabletop map you want to play. It can be used as a receiving radio telescope to survey space or track...
Topics: astronomy, array, deep_space, tabletop_gaming, wargaming_terrain, 6mm, mecha, snap_together,...
5
5.0
Jun 6, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 5
favorite 0
comment 0
An airport/spaceport control tower designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support units placed on top for playability. The top is 5 levels tall and the bottom is 1 level tall if you're playing a specific mecha tabletop game. There are two files. One each of the building both with and without hexes so that you can print the one that fits your playstyle. As always, tipping is appreciated at: paypal.me/rainingfire416...
Topics: base, wargaming_terrain, american_mecha, aircraft, control, wargaming, Buildings & Structures,...
4
4.0
Jun 11, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 4
favorite 0
comment 0
An apartment building designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support a unit placed on top for all 19 hex locations. It is 6 levels tall if you're playing a specific mecha tabletop game. There are two files. One has the building on hexes and the other is hexless so that you can print the one that fits your playstyle. Further, there is a second variation of this building, uploaded as “Residential Tower 4B” here:...
Topics: tabletop, mecha, 6mm, mech, wargame, Buildings & Structures, thingiverse, tabletop_gaming,...
5
5.0
Jun 10, 2021
06/21
by
Raining Fire (RainingFire)
data
eye 5
favorite 0
comment 0
Another Canadian business seems to be thriving in the Federated area! It turns out we still need medication, beauty products, and other essentials that this business sells 24 hours a day. This building is designed to be 3D printed as terrain for 6mm tabletop gaming. The top of the building is large and flat enough to support placing units on top for playability. It is 1 level tall in most areas, except for the front two hexes where it is 1.5 levels tall, if you're playing a specific mecha...
Topics: shop, retail, pharmacist, tabletop, mecha, 6mm, mech, pills, wargame, canadian, Buildings &...
